Dangerous 3" Super Magnet Unboxing and Safety Testing 

Chace, thanks for the feedback and kind words.

3 year late ratio

@@Javier-kg2ev same

Raspberry production s, thanks for the comment and feedback.

Right. I have tested my 480lb magnet with pure steel plate and it is extremely hard to get off.

Gadget, thanks for your comment and feedback. Agree, using the magnet on pure ferrous metal works best.

Adams Brew, thanks for your comment. Agree the real danger is accelerating objects. But with larger size magnets like what we're talking about here I think long term static (constant) pressure would be a problem because eventually you would shift say your hand the the pinch factor would be high. I'm not willing to take that risk but interesting question.

Cameron, leather work gloves or thick water proof gloves are best to use with these magnets. Here's some examples: amzn.to/3fkp1Ey or amzn.to/31lhpcH

Jasman35, thanks for the comment. Could very well be on the shielding.

John, thanks for your feedback. Agree with your comment, spot on.

Hey dude, you did just fine. I don't mind your mispronunciations one little bit. 9 out of 10 people will mispronounce Neodymium. These are a bunch of armchair critics that don't have the curiosity to even try these things, and a bunch of "I'M MISTER PERFECTS" that have nothing better to do than criticize others. I was a machinist and I applaud your use of a straight blade screwdriver to tighten that screw as a #4 or larger Phillips drivers are relatively uncommon. AS A MACHINIST I would have done the same thing if I didn't have the right tool. What I like about you is that you are curious, friendly, and will happily share your experiences. You have far more personality than all of the armchair critics that have nothing better to do than piss on others. Good for you! "Illigitimi Non Carborundum!" That's a mock-Latin aphorism meaning "Don't let the bastards grind you down!" I'll probably end up with 10 of these idiots telling me I got the Latin wrong. They can all clean the slippery end of my dipstick.

Thanks John again for the positive waves, you are a good soul.

Thanks Alison, Eti & Josh

Anthony, my magnet has a steel cover on everything but the bottom which has protected it well so far. Check out my magnet fishing setup here which I think will answer all your questions. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2QqgeLe8IKc.html good luck. Here's my magnet fishing video where I actually use the rig: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9yHPcLiy7_8.html good luck

Around 400 pounds

Thanks for the feedback. See the Make It or Break It links below for other super magnet videos I've recently made that go into the details you're looking for.

GeneF, Valid point.Thank you for the comment.

Steve, maybe so. Thanks for the suggestion.

Steve Yoshikawa I was gonna say the same thing.

Steve Yoshikawa also they would be somewhat magntized. From sitting with the magnet for so long shipping

Steve Y nah dude this gust is just a fucking idiot

Steve Y yea

Keyboard Warrior, thanks for the comment and thumbs up. Much appreciated.

I did, and have since gone to a whole new camera rig setup.

Coco Nut, thanks for the feedback. Glad you enjoyed the video.

Stainless

Larry, will do. Thanks again for another tip.

that's a great idea, I think I'll give the lock washer a shot. Thanks for the suggestion.

yup... thread locker as well.

GammaRay326, thanks for the feedback and valid point. Check out my new followup video, 350 lb Force Super Magnet? Prove It here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wXmcWn6VT3I.html where I do just what you mention above.

Lewis Kingsley, thanks for the comment. Good luck with your fishing. I've been thinking about getting another magnet also, although probably not a 500 lb force one.

Steve, here is the link to the magnet I have: www.amazon.com/gp/product/B01JK20IR8 Thanks for the suggestion. I'll make sure to post the link from here on out on all my super magnet videos.

.

oh yeah yeah, thanks for the comments. New magnet fishing design coming soon.

Blake, sorry about that. I'll try to remember to get it right during my future super magnet videos.

Make It or Break It don't worry about it. Neodymium is a ridiculous word

BlakeMeyer239 he said allumilum too.

sillynium next XD

BlakeMeyer239 ikr

Thanks Mike, it wasn't meant to be serious. Always interesting the range of comments a video will get.

Ian Mangham, thanks for the comment. I'm glad you saw this video in the light it was intended.

Jeremiah, thanks for the suggestion, I'll remember it for next time.

Do you know the history of why we measure in feet?

Everyone might send em some poop from poopsenders.com. trust me its a thing

Agreed. Never really thought about it that way...

Blue Skeleton, thanks for your comment, you can check out my fishing videos here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2QqgeLe8IKc.html and here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9yHPcLiy7_8.html and here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QmBbRYWo49c.html

Win Win, your magnet sounds awesome have you gone fishing with it? Check out my new design: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sm5dbfpqaVo.html

Phil, That's exactly the design used. Thanks for the feedback. Here's the video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2QqgeLe8IKc.html

thanks Tanner, appreciate the feedback.

Tanner Vlogs I agree

Thanks Teela for the positive feedback.

Roy Rice, thanks for the feedback. I'm assuming you are referring to digital watches.

Jed Finds, yeah its a bit scrapey, will now probably use that in one of my Halloween builds. Thanks for the feedback.

No problem! Loved the video by the way. I liked the tape measure part the best haha

Thanks Stephanie, appreciate the positive feedback.

Ra Lu, thanks for the positive feedback. Always appreciated.

JoshQun, thanks for the feedback. It's a long story...

Check the main info section below the video.

aussieexxy kane, thanks for leaving a comment. Agree these magnets can be very dangerous.

G S, good question. Check out the link in the comments section for all the specifics.

Ra Drumba, thanks for the additional info on stainless steel, much appreciated.

mousescorp, thanks for the feedback. I'm curious how you found this out.

A little of experience and a smaller amount of common sense :)

what can I say, its a trip word for me. In follow on videos I did correct the way I said it. Thanks for you comment, always appreciated.

rayluc 100 thanks for the suggestion, I'll try it out.

This video was published at 1080pHD, most all my videos are HD. Thanks for your comment.

Just to let you know I was a professional machinist and if I didn't have a #4 or #5 Phillips bit in my tool box I would have done exactly the same thing he did. What amazes me is that I need to let YOU know that he KNEW he had the wrong kind of screwdriver. And I just need to let YOU know that your "information" was pointlessly condescending. You must be PROUD!

plants247 you're welcome. Thanks for the reply.

plants247, thanks for subscribing.

JON Gergeceff, great idea, I think I'll try some Locktight before I go out fishing again. Thanks.

AK Ke Tadke, thanks for your comment and feedback.

Daler, I don't think so, the magnet is glued in the sleeve to stay and protect it. These magnets have a tendency to be very brittle.

Yeah in the first couple seconds. he says Neobymium ... the guy sure is an expert.

you can never have enough, can you...

Mike Meyers You can't

Nestor Galo, thanks for the feedback and comment.

george, thanks for the positive feedback. Agree, putting videos together are not always easy. Always striving to get better.

It was my pleasure. I have subscribed and can’t wait for more videos

george, thanks for subscribing, I strive to post a new video each week. Always have several projects going on in parallel.

Simon, the loop is actually stronger than the magnet, check out this video to see: 350 lb Force Super Magnet? Prove It here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wXmcWn6VT3I.html

Make It or Break It no I mean it being stainless is why its not getting much of a reaction from the magnet, maybe cheap was the wrong word, but not 100% stainless as the magnet is still trying to grab it

SimonCUnningham. There are many grades and alloys of stainless, each having different properties. In the machine shop my first test of an unknown stainless alloy was a magnet test as stainless alloys are broken down into 2 major groups being "Magnetic" or "Non-Magnetic". And even within both groups there are variations of just how strongly they are attracted to a magnet. And ALL those alloys are considered to be 100% stainless steels as they all have an iron base and then alloyed with other non-corrosive metals and carbon in varying degrees and combinations. One example of the differences is that if you have an Induction cook-top stove and want to use stainless cookware, the pot or pan MUST be made out of Magnetic Stainless.

J Raymond, thanks for the positive feedback. Some of the comments are surprising, but that's RU-vid.

compressedfilms, thanks for the feedback. The magnet is stronger than you might think, check out this video to see the test I did last weekend: 350 lb Force Super Magnet? Prove It here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wXmcWn6VT3I.html I like your idea on the thin foam, thanks for sharing.

Trippy 😀

@Brady Hartsfield Don't be Landon 🤣

Michael, Thanks for the tip. Agree, these magnets can really hurt if you're not careful.

Dano1947, thanks for brightening my day.

lokesh 2229 lol

lokesh 2229 ooooooo

Kevin Perry, a very good point, thanks for the comment.

Deep Bass, thanks for the feedback. Yes, I did say it right in the follow up videos below. Thanks for watching.

Enjoyed it

Raisya Millionaire, thank you for your comment and feedback. Here is a link to the magnet I pruchased: www.amazon.com/gp/product/B01JK20IR8

Timur, not sure I understand your question.

U said grams when right word is kilos.

ah, thank you for pointing this out.

youtube the name actually he was right the first time those scales don’t measure in kilos

Why dont u shut The fuck up!?

Dano1947, thanks for the compliment, I think...

Miguel, thanks for the feedback.

brandon slingsby, how's the bigger magnet working for you? I've seen folks lose larger magnets because they clamp onto to something like a conduit pipe and the rope breaks...

@@MakeItorBreakItNow its sound, if i get the magnet stuck i just chuck a grappling hook in after it

@@MakeItorBreakItNow i use a thicker rope, it is like 3 of them ropes put next to one another

@@southyorkshiretreasurehunt8513 you got some good solutions there, thanks for sharing.

@@MakeItorBreakItNow sound m8