Тёмный

Dangerous Old Radiator - Restoration 

TysyTube Restoration
Подписаться 2,6 млн
Просмотров 2,4 млн
50% 1

This is an old vintage Radiator made by Thermor in 1950's.
I found this radiator at local flea market store, it cost me 12 euro.
This is a very beautiful radiator and very rare in this condition.
I hope you like this restoration. You can send me items to restore, if you have something.Contact me on Instagram or send me an e-mail with some pictures.
Index of operation and materials:
00:01 presentation
00:31 begin disassembly
02:53 paint stripper
03:39 grinding the remaining paint
04:07 sanding the interior
04:23 i degrease all the pieces
04:34 anti-rust paint
04:59 sanding the dust particles
05:30 primer
06:01 cleaning the badge
06:35 cleaning the mirror
06:57 polishing the mirror
07:23 cleaning the front grille
08:09 polishing the front grille
08:54 wet sanding the primer
09:29 hammerite paint
11:05 grinding the small parts
11:24 car polish the front grille
12:56 the re-assembly begins
19:09 presentation
20:04 testing
If you like this restoration please share and subscribe
Disclaimer: I am no professional. I am completely self taught and would appreciate any feedback, advice or constructive criticism and suggestions .
#Rare 1950
#Thermor Radiator
#Restoration

Хобби

Опубликовано:

 

21 дек 2018

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 2,4 тыс.   
@TysyTube
@TysyTube 5 лет назад
Thank You for Watching! Please Subscribe 🥰😘 And Check My New video Here : (The Jar is almost full) 🤩 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--EZBi9O_0rw.html
@gonzalo4732
@gonzalo4732 3 года назад
Hey! Ho! Let's Go! 19:12
@ziogasato411
@ziogasato411 3 года назад
Can i be in your next video
@calebquintana5724
@calebquintana5724 2 года назад
If you guys have watched Cool again restoration you will know about the paint stripping laser gun
@garnetdavey8776
@garnetdavey8776 2 года назад
Hey Tysy, how long does it usually take you too do one of these full restoration's?
@Sardar.Asad77
@Sardar.Asad77 5 лет назад
Who Find Restoration Videos as Satisfying Videos?
@fender5247
@fender5247 5 лет назад
Yes I do this is how I relax after a long day at work it’s almost as relaxing as getting a back rub
@kylietrue5231
@kylietrue5231 5 лет назад
i came here bc i was starting to find satisfying videos unoriginal and boring
@aloneinthedark8081
@aloneinthedark8081 5 лет назад
I thought I was the only one.
@aloneinthedark8081
@aloneinthedark8081 5 лет назад
@@ThatOneTravel no asmr sucks and it is super creepy. This is actually pleasant to watch and hear.
@So_Harufied
@So_Harufied 5 лет назад
I’m a girl who can’t change a lightbulb, and I’m mesmerized by this channel.
@ChozoSR388
@ChozoSR388 5 лет назад
I wish the '50s aesthetic would come back into fashion; I think that stuff looked classy af
@FriendBe
@FriendBe 5 лет назад
Quality too.
@evgeniydeus8137
@evgeniydeus8137 5 лет назад
I like 50s designs better than modern ones. I think they found the right spot then.
@albert5080
@albert5080 5 лет назад
I agree with you but this was unsafe af
@AmberLF
@AmberLF 5 лет назад
I agree but also with Art Deco/ 20's opulence.
@xeroinfinity
@xeroinfinity 5 лет назад
i like that its not fashionable. makes stuff cheaper when i find something i want to buy. lol
@jimhebert4261
@jimhebert4261 5 лет назад
I really like the fact that you take almost every single item and break it down to its basic parts.
@ryandavis4448
@ryandavis4448 3 года назад
I bet when you were a kid, you'd take all your Christmas presents apart to see how they worked, lol?
@TysyTube
@TysyTube 3 года назад
exactly 🤣🤣🤣🤣
@AdrianNelson1507
@AdrianNelson1507 Год назад
I still am :)
@chrisbeard5794
@chrisbeard5794 Год назад
I'm the same way it helps with my Attention Deficit.
@mymechanics
@mymechanics 5 лет назад
That chrome grill came out absolutely amazing! Very good job with this restoration and the editing. I'm really proud to collaborate with you :-)
@infinitynachos8142
@infinitynachos8142 5 лет назад
Why you commented with your other Chanel?
@mymechanics
@mymechanics 5 лет назад
other channel? I am not TysyTube
@Impecable..
@Impecable.. 5 лет назад
my mechanics you have blown up and you deserve it! Your restorations are literally better than anything I’ve seen.
@mymechanics
@mymechanics 5 лет назад
@@Impecable.. i love to watch TysyTube, getting better with each video. Thank you :-)
@sirwhitecrayon2499
@sirwhitecrayon2499 5 лет назад
mymechanics your channel is amazing! The amount of fine detail you use is incredible! You even remake parts on a lathe! It's no wonder your channel has blown up! Cheers mate!
@daangisolf8178
@daangisolf8178 5 лет назад
Wife: babe i'm cold Him: okay, hol' up. Let me restore this heater for you
@calumbrooknicolson
@calumbrooknicolson 4 года назад
It took a day for the heater to restore.
@talldave1000
@talldave1000 4 года назад
hahahaha
@turdcannon9914
@turdcannon9914 4 года назад
Missed a perfectly good “don’t worry babe I’m the HOTTEST guy around”
@SmaugAltair
@SmaugAltair 3 года назад
Yes he did it well. He changed it from a Rusty heater to a working heater.
@iiarixle4229
@iiarixle4229 3 года назад
Im dead
@717Jeepin
@717Jeepin 5 лет назад
You could invest in a small sand blaster to help remove paint
@joselrodriguez5999
@joselrodriguez5999 5 лет назад
But test for lead paint (there is a "pencil" kit) to take extra precaution
@brucewoods9377
@brucewoods9377 5 лет назад
Jose L Rodriguez what’s the point of testing for lead, you are removing the paint anyway?
@xenonkay
@xenonkay 5 лет назад
Sandblasting lead paint creates a very fine particulate of the lead that gets everywhere and lingers stubbornly, even with a good filtration system. Also most countries have strict laws about heavy metal disposal and you would face legal consequences if you contaminated the area.
@joselrodriguez5999
@joselrodriguez5999 5 лет назад
@@brucewoods9377 Really? If you sandblast it or grind it out you may en up breathing some lead. As a minimum you will gain weight :) or maybe get poisoning.
@Seahorn_
@Seahorn_ 5 лет назад
@@brucewoods9377 If you want lead poisining and damage your brains by inhaling lead dust, be my guest.
@useitwice
@useitwice 4 года назад
That Thermor logo is awesome
@gran4404
@gran4404 4 года назад
It's the most satisfying logo I've ever seen and I don't know why
@thesturm8686
@thesturm8686 3 года назад
What's not to like about a fire breathing unicorn, amirite?
@comradewolf4901
@comradewolf4901 3 года назад
It is. I want to find one of these just to keep the logo.
@XthegreatwhyX
@XthegreatwhyX 5 лет назад
Love how the logo says "I will burn your house down" lol
@TysyTube
@TysyTube 5 лет назад
don’t worry will not burn anything 😊
@iiarixle4229
@iiarixle4229 4 года назад
Where does it say that?
@MrCyberly
@MrCyberly 4 года назад
*WITH THE LEMONS!!!*
@RichardMLowe
@RichardMLowe 3 года назад
@@TysyTube What country are you in?? I'm in Byram Mississippi USA
@TysyTube
@TysyTube 3 года назад
Richard M. Lowe France
@wompstopm123
@wompstopm123 5 лет назад
the video isnt sped up, he is just like this . i shook his hand once and it was very jarring and scary
@christianfezer5718
@christianfezer5718 3 года назад
"This paint is almost the same as the original." You mean: "This paint is the exact same type of paint as the original, except for the fact that the original most likely contained possibly lethal amounts of Lead and or Radium."
@bplisug4181
@bplisug4181 2 года назад
Hence the reason he said almost the same and not exactly the same
@enate3
@enate3 2 года назад
Ppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppp
@asdqwdzxcvxrfgsdcsefsxvrfsdf
@asdqwdzxcvxrfgsdcsefsxvrfsdf 2 года назад
This certainly gave me a chuckle.
@bret9741
@bret9741 4 года назад
I see, as usual, more thumbs up than down. Which gives me hope for humanity. TYSYTube deserves 100% thumbs up because of the quality of his work and the simplicity of his video’s
@FriedRys
@FriedRys 5 лет назад
Had to stop in the middle of the video, that Thermor logo badge is amazing.
@XanderRowlet
@XanderRowlet 3 года назад
I’ve watched this video probably a dozen times. Love seeing this old appliance saved from the scrap heap. This is probably my favorite restoration on this channel.
@Golden_God_Untethered
@Golden_God_Untethered 3 года назад
TYSY: As you can see it's cold here Me: Where are your sleeves?
@thesusboomerroblox6516
@thesusboomerroblox6516 3 года назад
Using power tools they say no sleeve if it gets stuck witch is easy it could break arm same with gloves latex is safe one
@Golden_God_Untethered
@Golden_God_Untethered 3 года назад
@@thesusboomerroblox6516 Aaaaah, that makes sense. Thanks for clearing that up.
@Shreckinsect_Extra
@Shreckinsect_Extra 3 года назад
@@thesusboomerroblox6516 meh it’s just a arm you don’t like actually need it or something
@thesusboomerroblox6516
@thesusboomerroblox6516 3 года назад
@@Shreckinsect_Extra yea your right reject arm become torso
@ronkluwe4875
@ronkluwe4875 5 лет назад
Also, that white fabric you were handling was likely asbestos. My assumption on any insulation that is prior to mid-1970's is that it contains asbestos.
@sscrubberhose5377
@sscrubberhose5377 4 года назад
Nothing like a dose of asbestos to wake ya up in the morning.
@tthomas9160
@tthomas9160 4 года назад
Ceramic fabric insulation probably
@madvidz2023
@madvidz2023 4 года назад
Looked to be Asbestos textile. He should’ve got rid and used a modern glass fibre material instead. Never mind
@TishaHayes
@TishaHayes 4 года назад
Only a risk if you decide to break it up and make the particles airborne.
@adriana.B58
@adriana.B58 4 года назад
@@madvidz2023 Nadie murió por el asbesto, ustedes son demasiado exagerados. El cáncer viene solo.
@andrewc.2952
@andrewc.2952 3 года назад
That is a gorgeous piece of vintage appliance. I love antiques that are functional, that you can include in every day life. Well done!
@joonasfi
@joonasfi 4 года назад
The ground wire lays on top of the paint in the chassis - I would've liked for you to test for continuity from the wall plug ground to the chassis front plate and back plate to see if the ground is doing its job
@Pocol0c0s
@Pocol0c0s 4 года назад
Yeah im an electrician and i would like him to test the PE
@bill_the_duck
@bill_the_duck 4 года назад
Or ideally sand the paint down where it's connected and then test continuity. Even if it's connected at the moment, if there's paint in-between, it may never be a reliable connection.
@lal12
@lal12 4 года назад
@@bill_the_duck best would probably be to use a ring cable lug with a toothed washer and a second nut under the luster clamp.
@kingofbrutaltheocracy9201
@kingofbrutaltheocracy9201 3 года назад
Its 220v. That paint isn't going to stop the arc if a wire touches the case. That bare copper ground wire is much more conductive than a hand touching the same paint. If the paint is such a good insulator that the copper wire cannot ground it, how are you going to become a ground for the case? Its fine.
@markjeffels3327
@markjeffels3327 2 года назад
Defiantly one of my all time favourites! I love old heaters!
@elmariachi5133
@elmariachi5133 5 лет назад
I think you could remove the paint more easily using a sandblaster. That logo is great, maybe you could spray a clear coating onto that, for protecting it from scratches?
@anibalnestorestefanunez8233
@anibalnestorestefanunez8233 5 лет назад
Ce radiateur électrique THERMOR 50, je pense qu’il a été conçu et fabriqué dans l’usine de cette société à Orléans - France. Ce sont d'excellents travaux de restauration. C'est merveilleux de voir des objets du quotidien si bien restaurés. Merci de bonnes vacances!
@scorpionjacket3129
@scorpionjacket3129 5 лет назад
Me: Oh this radiator isn't so dangerous Radiator: *Pulls out gun*
@thaintriguing1
@thaintriguing1 4 года назад
Scorpion Jacket guns don’t kill people, radiators with guns kill people
@PatThePerson
@PatThePerson 3 года назад
It's a decepticon
@Shreckinsect_Extra
@Shreckinsect_Extra 3 года назад
AGHHH SHITEE CALL THE COPS QUICK
@vandinem
@vandinem 5 лет назад
I would not have been able to resist replacing the white wires inside. Beautiful job!
@rewlazman
@rewlazman 5 лет назад
I really like his videos but, I'm with you. Wish he would used new wires. Or at least clean them?
@GGigabiteM
@GGigabiteM 4 года назад
@@rewlazman The wires had asbestos insulation on them for the heat, doing anything to disturb them is not advised.
@pierre84820
@pierre84820 5 лет назад
This is a death trap!! If the coil break it can get on fire! Your ground protection need to be connected to the metal and not the paint! (paint isolate). And finally you should put it at opposite of something flammable or a kid!
@andresouza2314
@andresouza2314 5 лет назад
And don't stick your finger inside
@PhilipPetrunak
@PhilipPetrunak 5 лет назад
15:27 I was literally thinking "it would be better if he grounded it" since devices back then didn't have a proper ground. Nice modernisation! I would recommend leaving the grounding wire longer so if the other wires get pulled out the ground is still connected. You can also buy GFCI integrated plugs that are great for applications like this.
@Mikeca300
@Mikeca300 2 года назад
Excellent job! I love to see classic stuff restored. It looks better than new.
@Wyvern201
@Wyvern201 10 месяцев назад
The fact that you still wetsanded despite the absolute perfection of that first coat, just, beautiful
@GeorgeWMays
@GeorgeWMays 5 лет назад
That came out very, very nicely. What could be more fun that watching someone else working? Your videos are much appreciated.
@5cloudwalker
@5cloudwalker 5 лет назад
I laughed when the rust preventative paint was the same colour as rust, all in all a joy to watch 😊
@fuzzybee5988
@fuzzybee5988 5 лет назад
It's the same colour because then the rust thinks there's already rust, so more rust isn't necessary. You kind of trick the rust!
@panting007
@panting007 2 года назад
Just amazing. You are my favorite restoration video maker. A lot of the things you do are the way I would do them. If I could. You keep making the videos, I'll keep watching.
@johnnypare7426
@johnnypare7426 5 лет назад
I love when your grinding the frame and you see a peace off metal going crazy in the back ground
@lyon666
@lyon666 5 лет назад
Old radiator in grandmas house, I can smell it through the screen.
@ArkadiuszFlak
@ArkadiuszFlak 4 года назад
Amazing, just one thing that I would not be able to live with, that cable at the back, it must go through the whole in a leg/stand :-)
@donfenton7473
@donfenton7473 5 лет назад
I find your videos so satisfying and relaxing. I am “fix it” challenged but love to watch what you do.
@TysyTube
@TysyTube 5 лет назад
thank you so much 😊
@jessicafrawley5856
@jessicafrawley5856 3 года назад
I have been really enjoying your videos. I love watching you give life to something old!
@nickthomasson
@nickthomasson 5 лет назад
You forgot to pull the cord through the stand ;-)
@500MTH
@500MTH 5 лет назад
it happens to me all the time.
@inertia210
@inertia210 5 лет назад
I was waiting for this comment it bothering me
@wege85
@wege85 5 лет назад
I was too like "Nooo" messy cable management...
@gustavfenk4021
@gustavfenk4021 5 лет назад
I think it would look better with a cloth covered mains cable, rather than plain black plastic or rubber.
@kevindumais9610
@kevindumais9610 5 лет назад
I don't think it would fit through the little hole.
@simcaj.4474
@simcaj.4474 5 лет назад
Neuvěřitelné! Vše co zrestaurujete je opravdu jako nové! Krásná práce
@keelerhenicke5457
@keelerhenicke5457 5 лет назад
Anyone else surprised at how clean and nice the little emblem piece came out, it looks brand new and only with some scrubbing
@user-sl3il5sz2s
@user-sl3il5sz2s 5 лет назад
Once, a long time ago, I toasted bread on a similar radiator like a toaster. It may be too thick cable, radiator power is obviously small. But this is nagging with envy. This is truly a perfect recovery. And this radiator is a bit younger.
@svenmonroe5371
@svenmonroe5371 5 лет назад
When I see the final results, it's for me like travelling in time.😁
@oldhamegg
@oldhamegg 5 лет назад
you have to be careful with that heating element. it is wrapped over asbestos. As long as it doesn't break you're fine.
@ButtonsKing
@ButtonsKing 4 года назад
IMHO it is wrapped over ceramics.
@WalterKnox
@WalterKnox 4 года назад
no, that white stuff is just ceramic... nothing else. now that white insulating pad in the back of the heater was asbestos.
@makotroid108
@makotroid108 2 года назад
Let's all just take a moment to appreciate how awesome that logo is.
@jackesworthy9081
@jackesworthy9081 4 года назад
As always , a superb restoration !
@ThatGirlEricaOG
@ThatGirlEricaOG 5 лет назад
Nooo I love the paint stripping part!
@Grant7AutoWorksG7
@Grant7AutoWorksG7 5 лет назад
lol
@vaninapn84
@vaninapn84 3 года назад
3:42 **gd's practice song starts to play** the background part:
@matthiassayler4637
@matthiassayler4637 3 года назад
Incrediblly good! Never seen a restauration as detailed this! Carry on!
@bubblylemon9471
@bubblylemon9471 4 года назад
Its so much fun to listen to all the sounds when theyre sped up
@adelina1980
@adelina1980 5 лет назад
On the cable, the earthing contact must be the longest wire. In addition, it must be connected bare with the housing to be protected. Here, according to the video, it seems to me that he was screwed on the paint. Furthermore, the connection cable is missing a strain relief.
@censusgary
@censusgary 5 лет назад
I get your other points, but why must the earth wire be the longest wire?
@sivalley
@sivalley 5 лет назад
@@censusgary It's to ensure that if the cable gets pulled from its connection points and makes contact with the chassis is will short to ground and ensure the protection device upstream will disconnect the circuit or at the very least prevent becoming an electric shock hazard.
@adelina1980
@adelina1980 5 лет назад
@@censusgary The earthing wire may only be torn off if all other (shorter) wires have already been torn off. This ensures that the earth wire has contact until the very end and provides security.
@Vizimech
@Vizimech 5 лет назад
Was also thinking that; unless the paint itself is highly conductive it's gonna impede the grounding.
@aytonbob
@aytonbob 5 лет назад
Also all the separate parts should have a continuous earth bond on bare metal for safety.
@Kitsaplorax
@Kitsaplorax 4 года назад
The metal case needs to have continuity to the earth ground, which needs to be secured by a screw. A GFCI is a must with an open grid design.
@Minoriscful
@Minoriscful 2 года назад
Your speed up process is amazing i would have stopped halfway through and it gives a reason to keep watching through the adds
@Timmetrius01
@Timmetrius01 4 года назад
My heart swelled with joy when you attached that Earth to it
@fewwiggle
@fewwiggle 3 года назад
Except it didn't really (properly) connect to the metal body/frame.
@BetamaxFlippy
@BetamaxFlippy 5 лет назад
16:35 "Mmmh yeah this strip of asbestos now goes back in place!"
@michaelpritt6358
@michaelpritt6358 4 года назад
Betamax Flippy asbestos is only dangerous if the particles get airborne. And it only dangerous with prolonged exposure to the dust. The small amount of it in the wires insulation is nothing to worry about.
@mattt198654321
@mattt198654321 4 года назад
Am I the only one who watches these in 2x speed? I need my restoration to happen FASTER :)
@respectedmastermind
@respectedmastermind 4 года назад
Me, so i can watch more restoration
@bjdenil
@bjdenil 2 года назад
Like the video - thank you. You have improved quite a bit since this one. I really like how you started cleaning up all the parts in a build now - not just most...
@ama8340
@ama8340 4 года назад
It's very satisfying watching the old stuff getting new again
@Gun5hip
@Gun5hip 5 лет назад
"As you can see it's cold here" laughs in Canadian
@eloisanzara237
@eloisanzara237 5 лет назад
*laughs in Alaskan*
@Zegezer
@Zegezer 5 лет назад
*laughs in my soul*
@mimidoll13
@mimidoll13 5 лет назад
@@juubilo1509 also hes inside so 15 is pretty cold
@frstwhsprs
@frstwhsprs 5 лет назад
*laughs in Canadian*
@sky10456
@sky10456 5 лет назад
*laughs with hypothermia*
@erikloeffen4143
@erikloeffen4143 4 года назад
2:58 I think it's 'my mechanics' who sandblasts everything he touches
@carebear8
@carebear8 3 года назад
I love your videos! I watch them before bed, there so relaxing! Your amazing at what you do! 💛
@NavySeal1178
@NavySeal1178 2 года назад
It's nice when someone admits they still have little things to work on. I can definitely appreciate the honesty. But it looked great to me so keep on!
@pirateman1966
@pirateman1966 5 лет назад
Why can't they make stuff this good of a quality anymore? At any price! No plastic anywhere. I hate plastic.
@censusgary
@censusgary 5 лет назад
PirateKitty : Why don’t they makethings that way now? It’s pretty simple, really.. There aren’t enough people who will pay $200 for a portable room heater instead of $20 for a similar, but less durable, one.
@sethh8892
@sethh8892 5 лет назад
@@censusgary actually there are some Plastics that could be considered more durable than metal. Also it depends on the application as well. Besides there's no reason to make this out of metal. They just did it back then because metal was extremely abundant. Why would you make a plastic bottle for water when you can make a metal one? Cheaper, plastic is extremely abundant, and there's absolutely no reason to make it out of metal.
@pirateman1966
@pirateman1966 5 лет назад
@@censusgary No. That is not the reason. It's called "failure engineering". It's not just this heater. It's everything. For example; I bought a full set of Whirlpool top of the line washer and dryers in 2006 and it had 2 service calls in 2 years. It ended up by the side of the road in 3 years. The insurance company decided it costed them more for service calls than to pay me to buy new ones. On the other hand, my parents bought a fridge when I was born in 1959, and it was working till sold in 2006. Manufacturers learnt that if they build it like a tank, people won't have any reason to buy new ones. This is just one example. If I had the time or the willingness to teach you, I could list pages of such examples.
@censusgary
@censusgary 5 лет назад
PirateKitty : I’m not sure how I feel about being “taught” by someone who appears not to be able to count to two (examples), but you have a point. It doesn’t contradict my point, though. Both factors are real.
@pirateman1966
@pirateman1966 5 лет назад
@@censusgary Go argue with someone else.
@kingofbrutaltheocracy9201
@kingofbrutaltheocracy9201 3 года назад
A lot of people seem to think that the paint will stop the copper ground wire from conducting 220v, but somehow still remain conductive to a humans....smh. Great job, awesome logo on that beautiful heater.
@asthinecrowflies
@asthinecrowflies 3 года назад
Getting ready for sleep by watching this. Awesome
@MarkMeadows90
@MarkMeadows90 4 года назад
Here in the US, we have hammered spray paint in Rustoleum brand I think. I haven't used that stuff in years, but does a great job.
@carstenebbinghaus2082
@carstenebbinghaus2082 5 лет назад
16:35 It looks like asbestos cloth. I would remove it!
@retro8696
@retro8696 4 года назад
That stops the wires from getting hot since asbestos is almost fire proof.
@Princess0fTwilight83
@Princess0fTwilight83 5 лет назад
Why am I addicted to these videos?????
@awsomer76
@awsomer76 5 лет назад
I love that you actually make stuff shiny like it would have been
@colinaskey9777
@colinaskey9777 5 лет назад
Another top notch restoration very well vidioed your restoration vidios are always first rate earning a 5 ☆ rating
@TysyTube
@TysyTube 5 лет назад
thank you so much 😊
@sanderplaymo
@sanderplaymo 5 лет назад
Perfectly! Like a new! Respect
@paulolange3462
@paulolange3462 5 лет назад
I just LOVE that exploded view that you always do! It's almost as good as the finished piece
@CaptainWahoo-gh2pg
@CaptainWahoo-gh2pg 5 лет назад
You make these things look so easy AND I'M LOVIN IT
@jackstraw1919
@jackstraw1919 5 лет назад
Great restore! And very smart cable upgrade!
@X_TheHuntsman_X
@X_TheHuntsman_X 4 года назад
Thinking I might have replaced that heating coil and the wiring as well, but still, really enjoyed watching this. 👍 Well done!
@wm.j.roscioli2976
@wm.j.roscioli2976 4 года назад
You did a beautiful job restoring this heating element.
@talldave1000
@talldave1000 4 года назад
I enjoy your videos. Thanks for the time and effort you put into making them.
@dimitrioslykissas7981
@dimitrioslykissas7981 5 лет назад
I have a suspicion the cloth-looking band of insulation protecting the cables might be asbestos.
@Renville80
@Renville80 5 лет назад
Dimitrios Lykissas Varnished cambric is a more likely possibility and harmless.
@tinkomertens7936
@tinkomertens7936 5 лет назад
it could be... altho in the 50s thay already knew that heating asbestos wasent a good idea! source: en.wikipedia.org/wiki/Asbestos#Discovery_of_toxicity
@pauldriscoll5010
@pauldriscoll5010 5 лет назад
i know even in the 70s heaters were still using asbestos cloth, the wires are less likely to be
@groovymander
@groovymander 5 лет назад
Dimitrios Lykissas I was thinking the same thing!
@Tepadj
@Tepadj 5 лет назад
Asbestos removal memes?
@jekinneys
@jekinneys 5 лет назад
The only way to get a better finish, especially with all the work you to up until the top coat, is to spray it. With that type of paint, I would suggest a small paint booth or make one for airbrushing and models as the parts are small then a small gravity feed sprayer or in a spray can, using your own gun allows you to mix paint for that perfect color. Just be sure it vents outside and wear a respirator. You will never get a great finish with a brush, a good one maybe but never great. Obviously, that is the only thing lacking in this video was the final paint. Still a great job!
@lipenhumtsoe
@lipenhumtsoe 5 лет назад
My thoughts, exactly. Anyways great job, as always! Merry Christmas!
@snowydaysalways5937
@snowydaysalways5937 5 лет назад
i think that finish is nice, it gives it that vintage texture look
@MrWillhill41
@MrWillhill41 5 лет назад
@@snowydaysalways5937 That is what that paint dries like, you can see the brush strokes in the final product. Using an airbrush will lay a smooth finish without the brush strokes being visible, will still dry hammered.
@snowydaysalways5937
@snowydaysalways5937 5 лет назад
@@MrWillhill41 i guess if it dries like that then an airbrush or sprayer would be a good investment
@MrWillhill41
@MrWillhill41 5 лет назад
@@snowydaysalways5937 It's the paints make up to dry specific, they have some rattle cans that do the same that i used on a few simple home projects.. Love these vids of bringing life back to old products.
@markduncan6690
@markduncan6690 5 лет назад
What a slick makeover! Very retro! Gotta like it!
@hassanlaaroussi9871
@hassanlaaroussi9871 5 лет назад
Waaaw...your work is incredible...bravo
@ConanRider
@ConanRider 5 лет назад
Can you do me a big favor and check continuity between the front of the grill and the ground of the plug? I don't think you properly grounded it. Won't the paint act like an insulator?
@tinkomertens7936
@tinkomertens7936 5 лет назад
It will!!
@nicht-so-wichtig
@nicht-so-wichtig 5 лет назад
And please use ferrules! Do not screw bare copper into a connection. Except it's meant to work like that, like a wago clamp or similar.
@tinkomertens7936
@tinkomertens7936 5 лет назад
@@nicht-so-wichtig that's the one thing Noone cares about!
@nicht-so-wichtig
@nicht-so-wichtig 5 лет назад
@@tinkomertens7936 that's the problem... As hobbyist maybe not as critical, but if you use that sort of connection with powerful devices and mechanical stress it will be interesting. I'm not a nanny, everyone is his own quality control. Just want to point out the right way to do it ( at least for german regulations).
@Sewqen
@Sewqen 5 лет назад
the purpose of the painting is already for insulatation. he used the screw and connected it to the grounded side. i mean the screw makes the connection between ground and radiator. If im missing something, pls noficate me.
@kollerd31
@kollerd31 5 лет назад
Wow, no on/off switch in that heater. Dangerous is right! Nice work though! Doug
@Ninja_RoseVT
@Ninja_RoseVT 5 лет назад
Douglas Koller and the fact he did not replace the electronics that could easily catch fire
@DrLoverLover
@DrLoverLover 4 года назад
@@Ninja_RoseVT Why would it do that? And these heaters connect to an outlet with a switch. To do otherwise would be stupid, and being stupid is dangerous.
@Ninja_RoseVT
@Ninja_RoseVT 4 года назад
blast rock old electronics catch on fire easily
@simboulisxbox7939
@simboulisxbox7939 4 года назад
CALLOFTOXICITY depends
@fewwiggle
@fewwiggle 3 года назад
Maybe a mercury switch (or similar) would b a good idea in case it tipped over. And, of course, some sort of breaker.
@cdarting91
@cdarting91 2 года назад
I think this is my favorite video to rewatch
@VidyUwU
@VidyUwU 4 года назад
I love when he removes paint with paint remover it’s so satisfying to watch.
@TheThundercool
@TheThundercool 5 лет назад
"The cable is melted", that's how much of a fire hazard these monsters used to be.
@christopherbedford9897
@christopherbedford9897 3 года назад
That cable was definitely not the original. Note the colours of the two conductors - yellow and blue - it was not intended for mains current. Don't blame the heater for that. Also, even an old-fashioned CRT TV set can pull enough current to melt the insulation on a proper cabtyre extension lead if used while coiled. Never use mains cable coiled up (and in the US, where the current is double what it is in the rest of the world, be *especially* careful of letting cables curl up).
@damnoldguy
@damnoldguy 5 лет назад
Awesome job again. Saving the past, one item at a time. The grill and logo plate are really cool.
@TysyTube
@TysyTube 5 лет назад
thank you so much 😊
@damnoldguy
@damnoldguy 5 лет назад
@TheJR1948 I really hate to pop your"I'm so special balloon, but it's not for using. You know, like a museum pice. But I'm sure you already knew that deep in your self inflated ego. Save your useless criticism if other people's comments. And have a nice day.
@Khanabyss420
@Khanabyss420 3 года назад
Love how u display everything after it’s all taken apart looks so neat
@hamzashahzaib4609
@hamzashahzaib4609 3 года назад
i love vintage things more than advance things 😍🔥
@dylanmorse
@dylanmorse 5 лет назад
Face reveal at 16:53 lol
@homadia2536
@homadia2536 5 лет назад
@Eric Holstien and 14:51 - 14:52
@moxxiexrandomimp9029
@moxxiexrandomimp9029 5 лет назад
And I wanna know what he really looks like he needs to do a video about himself and why he does this because he is really really good at this
@ZENERVOLTAGE
@ZENERVOLTAGE 4 года назад
After checking below and seeing another time marker of his face reveal...I checked that too. Not sure why though.....not like he's gonna suddenly have a different face!
@alexanderzubarev5984
@alexanderzubarev5984 5 лет назад
Краска подошла идеально. Выглядит действительно будто её только что купили. Моё почтение! )
@juanmartinmeneses9666
@juanmartinmeneses9666 4 года назад
All this kind of videos more than restore, are good for relax!!! good job!!!
@kayekaye4251
@kayekaye4251 5 лет назад
you messed up , didn't put the new cord through the hole in the stand, idk if you fixed it later tho?
@Torfindal57
@Torfindal57 5 лет назад
to remove paint you can: use sandblasting use high pressure water cleaner use immersion bath paint strippers use rotative brushing
@Mobin92
@Mobin92 5 лет назад
Be careful with lead paint though. You don't want to breath in dust of that.
@perez9619
@perez9619 5 лет назад
I think immersion paint stripping is the “safest” and most easily accessible when it comes to lead paint. It never when becomes air born dust, just goop.
@DopeeJamm
@DopeeJamm 5 лет назад
You can also try aqua blasting/vapour blasting.. it's ideal for delicate and soft metals but it's still a powerful cleaner, we have vapour blasters at work that are used for aluminium engine parts, it doesn't eat away at the aluminium at all, it's fairly cheap as well as around £30 an hour
@silentwraithgaming8631
@silentwraithgaming8631 5 лет назад
Fire also works
@tinkomertens7936
@tinkomertens7936 5 лет назад
he cant use rotative brushing bute to it MABY beïng lead paint!
@DeezEatsNStuff
@DeezEatsNStuff 6 месяцев назад
Watching the paint peel is one of my favorite things. I like it better than the sandblasting.😂
@munched55
@munched55 5 лет назад
Your skills have really improved since the first time I pinned your ears back just some weeks ago. If you like to paint your objects on a level surface instead of hanging them and moving around them as you spray, you might want to make yourself a turntable to rest the objects on and just rotate the turntable. The camera can stay in close-up and you can hit all angles without yourself needing to move around. Just an idea. PS Final coat the interiors and bottom sides first so that the object is not resting on a final coat risking damage to the finish that ultimately is most visible.
@TysyTube
@TysyTube 5 лет назад
thank you so much 😊, watch my army helmet to see this turning table
@TysyTube
@TysyTube 5 лет назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-vQXG5Qk52mo.html
@munched55
@munched55 5 лет назад
@@TysyTube That's right, I forgot about that one. You've built your subs amazingly fast. Congratulations.
@munched55
@munched55 5 лет назад
Joyeux Noel.
@BronzeHandPhotograph
@BronzeHandPhotograph 5 лет назад
Vintage Radiator's grill remind me iconic front grill of the Jeep. By the way good job mate, well done!
@TysyTube
@TysyTube 5 лет назад
thank you so much 😊
@qweqwevka
@qweqwevka 5 лет назад
I think about it too
@tedderjason
@tedderjason 5 лет назад
Kind of. Jeep is 7 bars
@Speeddemon3
@Speeddemon3 5 лет назад
Brother, you are the master!
@creativekristan8386
@creativekristan8386 3 года назад
I love you wet sanding part the sound of sanding is very satisfying in my ears
@TheFirstNana2222
@TheFirstNana2222 5 лет назад
looks better then new, i think. I just was not born then.
@Tyler-ub2bu
@Tyler-ub2bu 5 лет назад
Sand blasters are awsome for removing paint and rust 😉
@TysyTube
@TysyTube 5 лет назад
i need a sandblaser cabinet
@kylejones1182
@kylejones1182 5 лет назад
TysyTube Restoration Harbor Freight Tools has a sand blasting cabinet that isn’t to expensive
@tinkomertens7936
@tinkomertens7936 5 лет назад
True on the paint part!! rust... also! but not as much!!
@Wasper216
@Wasper216 5 лет назад
you don't want all the old paint mixed in your blast material, so you should remove it with paint remover first anyway.
@lindsayorourke9948
@lindsayorourke9948 5 лет назад
Sandblaster!!! It’s so satisfying to watch too!!! Please get one!
Далее
Vintage Rusty Scale Restoration - With Powder Paint
18:36
Restoration on another LEVEL - Victorian Era Level
22:53
Exceptional Vintage Balance Restoration
22:23
Просмотров 904 тыс.
Electronic Pinball Retro Game Restoration
18:11
Просмотров 1,3 млн
Vintage Rusty Tile Cutter Restoration
19:35
Просмотров 1 млн
Unique Tank Dispenser Restoration
20:26
Просмотров 2,5 млн
Drive-in Theater Speaker Restoration
21:52
Просмотров 558 тыс.
Vintage Oxidized Sprayer restoration
18:36
Просмотров 1,6 млн
Old Soviet Drill Restoration
19:14
Просмотров 2,5 млн
ПРОБУЮ ОКРОШКУ СО ВСЕМ!🫣
0:57
Просмотров 592 тыс.