Darex Drill Doctor 750SP Review and Demo w Dr Joe 

I bought the drill doctor 750 10 years ago and I have to agree with you on the simplicity of sharpening a drill bit with this drill sharpener. In the beginning, there was a learning curve on how to use it. But once I felt comfortable with it, sharpening a drill bit had become second nature to me. I love this machine, it has saved me hundreds of dollars of not having to buy new drill bits every time one of mine wouldn't cut anymore. I can sharpen a bit now faster than you could get in your car and leave your driveway going to the store to buy a new bit. Your video was very accurate on the use of the sharpener. If anyone would be interested in a purchase of a drill bit sharpener, I would highly recommend a drill doctor.

Thanks for a great video. I have had a drill doctor for years, but haven't used it in quite a while. Your video was a great refresher course. Thanks so much, Stay well, Will

Just bought a Drill Doctor 500SP used off EBay for $50. Your video helped a lot. The stator had a broken wire that intermittently caused it to stop rotating but I was able to repair it. I had a problem where the drill bit didn't have a 118 degree bevel after sharpened and was slightly tilted, so it over ground one side and underground the other side and appeared to be flat, not 118 degrees. It turned out to be a slightly bent drill bit. It had a slight wobble when rolled accross a level table. I have been sharpening up my collection of bits from the last 50+ years. A well built and designed tool is always a treat to use. Thanks for your video. Your video is well done. Denny

I really enjoyed your review. I was on the bench on deciding whether to purchase this unit and your detailed demo helped me make the decision to buy. So many You Tubers seem to ramble on, but you are to the point and very articulate in your explanation. Thank you.

thank you for helping my dad.

Hi Dr Joe Peter here I can't believe you're responded to me but thank you for your video and thank you for your compliment and your words of wisdom I'm excited to use my new 25-year-old still in a box Drill Doctor and you have one more subscriber look forward to more videos with more information thank you bye

Such a smart and handy man. I might have to find some drill bits for you to sharpen ☺️Looking forward to seeing you in 5 weeks😉

Very good. I have used one of these for years. I bought it used and never really new how to use it. I us it a lot. Thank you!

Thank you I've had a Drill Doctor for years but I don't have a VHS cassette recorder anymore

Thank you very much, after watching you, it made it a breeze, we have saved many drillbits, thanks to you, because we sure wasn't using it, the way you showed us! ✌️

Thank you for reminding me how to use my machine. I recently damaged several 3/16" drill bits drilling deep holes in hardened steel (railroad rail) so I had to resharpen them. Interesting point: I found that one of the 6 or so bits had a non-standard flute twist rate which meant that the little fingers didn't locate it properly in the chick! I even hand ground it to a flat end and roughly hand sharpened it, but still "no cigar"! So I finally gave up on it and threw it away. I knew that I could have hand sharpened it, but I just decided to get it out of my shop, so I wouldn't have to deal with it again in a few years.

Thank you for this very informative video , I just bought this whole setup ...😁not even used...,. from a thrift store in Norwalk Connecticut for $30 and I look forward to using it .....I double checked everything in the store ,read the manual thoroughly in the store to see if anything was missing.. it was all wrapped up in plastic and sealed and everything was brand new never opened. it comes in a case and everything's included and everything was perfect ,nothing missing, nothing broken.... look forward to sharpening my dull drill bits(I have a pile of dull old bits acquired over 30 years ....I'm 50 now ) I've been wanting to do this for over 30 years.... to get one of these ...I finally broke down because it was Brand New.. never used !!! in a box sealed up !!!!for 30 bucks , if tools could talk I'd love to know the story behind this and what it's been doing knocking around for 25 years not being opened or what's the story.... thank you for your helpful and very informative video again thanks Peter

Thanks. I just bought one of these. Looking forward to trying this out.

It took me 10 years bye my self too learn how the drill doctor I'm noleage as a metal shop worker and a motor head hahaha. My dad started me at 4 years old I learned how to change car tire.? The star patern the points of a 🌟 it was a long time ago. I'm a Mastercraftman of nolege happy new year Joe have fun In the garage

Thanks. Picked one up at a local yarn sale. I didn’t want to watch the VCR tape. 😂😂

That drill doctor is the best

thanks, that was an excellent guide.

Dr Joe Really helpful video. I just inherited a model 750. I dont seem to be able to move the chuck laterally for split point sharpening. Am i missing something🤔

Which is better for average user, the Drill Doctor 750SP or the 750x ?

Can you show how to sharpen a small bit? When I put one in to align the twists the two metal "feelers" snap to the point of the bit instead of to the narrowest area of the bit.

What is a reverse drill chunk for

Great video

Mine is exactly like yours; I see you have an extra stone for sharpening...How do you change the wheel stone? I cannot find anything, not even in the manual on how to change the wheel. Obviously I am missing something! LOL

I am alittle confused on bit types?

loved your show very informative