Das Ugly Stik Balsa RC Aeroplane Build - Pt 6: Finishing the Fuselage

Подписаться 61 тыс.

Просмотров 7 тыс.

50% 1

Das Ugly Stik, a balsa RC aeroplane build - Finishing the Fuselage is the 6th in a series of videos that take you through the construction of a 60" wingspan radio controlled Das Ugly Stik, designed by Phil Kraft, but with a few modifications along the way! The plans, from RCM Magazine in 1985, were downloaded from OuterZone website. A link to the plans is provided below.
Das Ugly Stik: OuterZone:- outerzone.co.uk/plan_details....

Опубликовано:

24 апр 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@jannovak2234 Год назад

Awesome video , Thank you lot dear sir

@MarkRobinson555 Год назад

Thank you very much, really appreciate the comment

@twincam825 Год назад

Nice job.

@MarkRobinson555 Год назад

Thanks!

@NormanLedoyen 4 года назад

Nicely laid out and good judgement of adding reinforcement where it should be. BRAVO!

@MarkRobinson555 4 года назад

Norman Ledoyen Thank you Sir, really appreciated 😀 Good to have your support!

@shimanosv9143 4 года назад

@ Norman Ledoyen I agree.

@RCTaildraggin 4 года назад

Brilliant detail, looking awesome. Thanks for sharing! 👍

@MarkRobinson555 4 года назад

RC Taildraggin! Thank you Sir, really appreciate your ongoing support 😀

@TheRealPDaveTH 4 года назад

Looking great, Mark.

@MarkRobinson555 4 года назад

Thanks very much for the comment, appreciated

@keithcarter9396 4 года назад

Good engineering plans to strengthen the fire wall mounting. This will provide a much longer life for the model (as long as you don't actually dumb thumb it into the ground). Normal flying and the occasional less than perfect landing should be fine.

@MarkRobinson555 4 года назад

Thanks for your comment and support, really appreciated

@agp7073 Год назад

Nice job Mark I’ve been enjoying watching the build. What brand of nose gear did you use? Looks similar to Fults

@MarkRobinson555 Год назад

Hi, not really sure, I ordered from a hobby shop in Bangkok a while back when I was living in Thailand, sorry I can't be more helpful. It is probably not a product I would use again due to the increased weight, when compaired to single leg

@CliffHarveyRCPlanes 4 года назад

I like banding wings on but it's a pain replacing them occasionally, bolts are forever but they don't give much lol

@MarkRobinson555 4 года назад

The bands I get here, dont last long and keep snapping, so I have to use lots on my trainer! They are easy though, just don't trust them! maybe I need better bands!

@user-my5xu2li1x 2 года назад

How many millimeters thick is the wood beside the fuselage?

@MarkRobinson555 2 года назад

The sides are 6.35mm - If you look in the video description there is a link to the full plans that you can download

@shimanosv9143 4 года назад

I think it is better for the upper sheeting to be cross line.

@MarkRobinson555 4 года назад

Yes cross sheeting is certainly better and stronger, but I went with the plans in this instance, as the fuselage is quite a strong construction with quite a few cross formers, and the longtitudinal sheeting was quicker.

@sputnikxxx 3 года назад

What kind of tools are you using for cutting out your plywood almost look laser cut great job

@MarkRobinson555 3 года назад

I cut every think by hand, with the ply I use a fret saw with a nice fine blade

@sputnikxxx 3 года назад

@@MarkRobinson555 thanks for the info. I am in the process of building the same model. Not my first balsa build but my first scratch build. I've been using a scroll saw and cleaning up with the sander after