DaVinci Kalani 4 In 1 Convertible Crib Assembly Instructions (Full Step By Step Instruction Guide) 

Will do! Glad this video seems to be helping. Please, subscribe if you haven’t already! ✅

👍🏾😎🛠 Anytime!

Glad this video served it’s purpose my friend! Please support the channel by subscribing ✅

Hey Kevin! 👋🏾 Anytime, I’m here to help! Please, subscribe to the channel if you haven’t already. ✅🙏🏾

Thanks! I’m glad you found a video to be helpful. Please, subscribe to the channel if you haven’t already. ✅🙏🏾

No problem! 😉 Please, be sure to subscribe ✅

@@Prime_Spaces I subscribed. It's an amazing channel.Keep it going.

Hey Jackie! 👋🏾 It’s possible that you are inserting the nut too far into the hole and the bolt is hitting the top of the nut (slightly above the hole. Sometimes the manufacturer doesn’t make the whole the exact height to align the boat and the nut. Does this make sense? Give us a try and report back if this fixed the issue or not. Also, please subscribe to the channel if you have not already! ✅🙏🏾

Hey Julian. That sounds super frustrating man. Unless they sent you a complete wrong set of bolts, it sounds like you may be using bolts in the wrong places. Can you confirm whether or not you have the bolts shown in the link I pasted below? If I were there I would disassemble the entire thing and organize all the bolts like I did in the link. Beware that some of them look the same, but are different and won’t fit if you put them in the wrong place. If your bolts match what you see in the link, then you should be able to assemble the crib. Just make sure you are properly identifying the bolts before using them. And please, update us if you have success putting it together. www.screencast.com/t/8wgJvinqG5e.

This is my problem with one of the screws on the side. I am certain I am using the right size screw. Did you find a way to fix this issue?

Hey there! 👋🏾 I have to agree. They are a bit of a pain to deal with. However, it is a pretty sturdy crib once assembled properly. Hope you were able to finish. Please, subscribe to the channel if you haven’t already. ✅🙏🏾

Hey! 👋 you should definitely contact the manufacturer. All of their information contact should be in the white envelope that carries the instruction manual and other marketing material they send you.

No, that is sold separately.

Hey Jonny! I haven't seen the mini version. Do you have a link to it? I might be able to determine if this will help or not.

The instructions actually recommend not to use one

Unfortunately, I don’t. This was assembled for a customer of ours and they opted for the fill crib. I do know that you will need to undo the bolts for the front part of the crib in order to attach the toddler guard.

Where do we purchase the toddler guard? Mines never came in the box.

@@CloseYourEyez00 They stopped including it in the box a few months ago, it's a separate purchase from Amazon. You've probably long since sorted this but just want people to know - this NO LONGER includes the toddler rail by default. To make it a toddler bed all you do is stop before they put on the final "front piece" after box spring installation. Then apply the kit (Part M3099).