Тёмный

Dead car plasma unit (fixed) with schematic 

bigclivedotcom
Подписаться 1,1 млн
Просмотров 61 тыс.
50% 1

My guess at what was wrong with this unit was completely wrong. It's as if they repurposed an existing circuit design and I initially thought they were trying to run a dielectric barrier plasma generator from DC.
In reality the fault was with component tolerances - possibly off-tolerance transistors. But having tested the transistors on a tester which identified then correctly and gave a plausible gain, I had a wild goose chase of component swapping.
Once I got it going I then found it did kinda work, but not as well as it should have due to the weird choice of output circuitry.
I get the feeling this is a clone of a clone with the factory not quite understanding the operation.
On a plus note, it's not one of the completely fake ones with a blue LED and fake circuitry. And we did get to do a very deep dive into the circuitry of this novel device.
If you enjoy these videos you can help support the channel with a dollar for coffee, cookies and random gadgets for disassembly at:- www.bigclive.com/coffee.htm
This also keeps the channel independent of RU-vid's algorithm quirks, allowing it to be a bit more dangerous and naughty.
#ElectronicsCreators

Наука

Опубликовано:

 

11 апр 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 199   
@HaLo2FrEeEk
@HaLo2FrEeEk Месяц назад
I wish Clive narrated audiobooks. I would listen to all of them.
@ep4no
@ep4no Месяц назад
Haha!! I was eating my cereal not really watching the video, just listening to his voice thinking the same thing as this comment 😂🙌
@TheRealSabakuNoGabo
@TheRealSabakuNoGabo Месяц назад
Both him and his brother, Ralfy have a mellow voice suitable for audiobook narrating. I think this is one of the factors of them having the number of subscribers they have. I have found myself enjoying just the sound of their voice and not having the slightest idea of what they're talking about 😅😅😅
@_..-.._..-.._
@_..-.._..-.._ Месяц назад
_”He was a tough man, bulging muscles, years of stress leaving maps on his face; he glanced at me from across the room. I knew without words what he wanted and I obliged”_ 😂
@CrinosAD
@CrinosAD 28 дней назад
I have thought the same thing many times!
@henryokeeffe5835
@henryokeeffe5835 Месяц назад
One slight correction: This isn't a Royer oscillator. It's very similar, but the Royer oscillator does not have a capacitor across the transformer and relies solely on transformer saturation to oscillate. This circuit is known by many names, I used to call it a Mazzilli driver (actually this one is a bit different, as it uses a feedback winding to drive BJTs, rather than diodes to drive MOSFETs), but other people may call it something different. In academia I'd probably call it a "self-driven resonant current-source inverter." It uses a parallel LC circuit (the primary of the transformer and the 68nf capacitor) at resonance, which is current limited by the 68 uH inductor connected at the transformer centre-tap. As it doesn't rely on driving the transformer all the way to saturation and it operates at resonance, allowing zero-voltage-switching, it's much more efficient than a Royer oscillator, especially when MOSFETs are used instead of BJTs.
@blg53
@blg53 Месяц назад
I heard this circuitry referred to as "Harmonic Royer". Presence of the capacitor between collectors allows with the right tuning to produce a sinusoidal output. "Pure Royer" can't do that.
@MaxPivovarov
@MaxPivovarov Месяц назад
Baxandall converter
@bryanspencr
@bryanspencr Месяц назад
@@MaxPivovarov in this case it was a banjaxed converter
@_..-.._..-.._
@_..-.._..-.._ Месяц назад
This guy electronics
@michaelcherry8952
@michaelcherry8952 Месяц назад
The problem with copies of copies of copies is that inevitably errors creep in, especially if you throw in the business of using the components to hand, rather than the optimal parts. I would be kind of leery of using an ozone generator in an enclosed place like a car. Sure, the instructions might say in badly translated English that the device is to be used only when the car is unoccupied, but given that you can just plug it in to the standard cigarette/12V power point I can see someone driving around with the thing activated. Ozone also doesn't play well with rubber, plastics, fabrics, paint and metal (all of which you find in the interior of cars) so you might just be shortening the life of door seals, upholstery, plastic trim parts and wire insulation if you leave the thing running for long periods. Maybe just not smoke or eat fast food in the car so it doesn't smell. If you're transporting a bunch of smelly footballers home from a match, well that's what the roof rack is for!😂
@dgk42
@dgk42 Месяц назад
Over the years, watching your videos, I love the variation of devices you take apart, and the liquids you put into a SodaStream :) I'm still learning, and you are a great help.
@nomusicrc
@nomusicrc Месяц назад
Thank you for showing us how it works after you fixed it
@williamromine5715
@williamromine5715 Месяц назад
Those of you who are long time fans of this channel will know that I am the channel's village idiot. At the age of 82, I don't understand electronics and I ask some really dumb questions. So this one is probably also dumb, but why are there so many devices producing ozone? Humans have been around for eons without having the need of ozone devices, and why do so many of such devices not work? To those who wonder why I subscribe to his channel, if I don't understand what he says, his voice is so soothing that he takes away the cares of the day.
@bigclivedotcom
@bigclivedotcom Месяц назад
You're definitely not the channel's village idiot by a long chalk. Ozone and an orgy of other exotic, but short lived molecules are constantly generated in outdoor air by nature. Indoor air goes stale quickly as the active molecules revert back to a more stable form. Devices like these can emulate nature indoors when used in a sensible manner, and keep the air fresh and sterile.
@Pulverrostmannen
@Pulverrostmannen Месяц назад
Yes! We like when Clive talk about Ozone devices!
@alpcns
@alpcns Месяц назад
That dot added to the winding as "quite useful" was hilarious. Love BigClive's humor.
@markmurphy3578
@markmurphy3578 Месяц назад
I haven’t thought about cold cathodes since I worked on analogue trunk switching. They used to be used for register translatiors and we had to test them by blanking out lights to see if their performance was affected. Fantastic!
@lesbrown5829
@lesbrown5829 Месяц назад
As soon as I heard him say ' cold cathode' I immediately thought of the magnetic drum (drums) register translators (RT's). Last seen in Glasgow Clyde GSC many moons ago......😊
@markmurphy3578
@markmurphy3578 Месяц назад
@@lesbrown5829 RT4’s. I worked in Rampart O/G unit in London. We must have had around 18-20 of them. Murder if there was a power flick. Screwdriver 5A at the ready!
@lesbrown5829
@lesbrown5829 Месяц назад
​@@markmurphy3578 Also remember checking new translations on the digscope(?) , infernal contraption with little blue flashing tubes representing binary digits. I think we had one full suite of them, so probably 8.
@_..-.._..-.._
@_..-.._..-.._ Месяц назад
I’ve tinkered with these after using the rental grade ozonator odor removers. I got 2 that were intended for hunters to deodorize their gear inside the truck, the first one worked for years for occasional odor removal on a jump start pack and overnight in cars. That one died and wouldn’t make ozone. The second one never worked and I could never figure out why. I was amazed the first time I heard about an electrical odor remover, it seemed like magic.
@Hamradio101
@Hamradio101 Месяц назад
Triggers broom i wonder how many people got the reference excellent as always mate
@jussikuusela7345
@jussikuusela7345 Месяц назад
In some of the newer cars, the cig lighter sockets no longer stay powered for a long period after you turn the engine off. For example in mine, a 2009 Ford. In some sense this s good, because some people run their USB to FM transmitters in their cars to have MP3 playback, so these will eventually be turned off without further intervention. But for the sake of charging devices or operating these gadgets, you would need to wire a separate permanently hot or manually switched socket. In all my previous cars the sockets were always powered.
@silverecco
@silverecco Месяц назад
Interesting. I grew up with Japanese cars, 87, 92, 97, 04, and they were all tied to accessory / ignition. The Dodge vans at work are the first ones I've used that are always hot. I thought it was a new thing! It's quite useful, but I've had to get used to unplugging chargers. One van has both with a key or battery symbol on the cover which is nice. Key one never worked, and I can't be bothered to fix it.
@jnharton
@jnharton Месяц назад
I think it's been that way for a fair while, to be honest.
@willemdodgerford5782
@willemdodgerford5782 Месяц назад
Never ever heard of a car plasma unit! Cool
@snakezdewiggle6084
@snakezdewiggle6084 Месяц назад
Cheers Clive 👍 Think I'll have a go at improving this one. Reminds me of the old school, camera flash.
@kenw.1112
@kenw.1112 Месяц назад
IT'S ALL GOOD MR. CLIVE! I LOVE YOUR VIDEOS THEY ARE REALLY AWESOME. I BEEN A TECHNICIAN SINCE I WAS 15 YRS OLD. ELECTRONICS FLOWS THROUGH MY VEINS. L0L but True. KEEP UP THE GOOD WORKS !😊
@phonotical
@phonotical Месяц назад
Is it truly dead when it never worked to begin with 😅 The only thing about the diode before a neon is I've found it'll allow the neon to light at a much lower voltage (about 90vdc) and that's only if you want to try and cheat it's brightness You're right with triggers broom though, couldn't think of a better analogy
@anonymus1234_
@anonymus1234_ Месяц назад
Clive does so much theory for everything with his notepad lol
@inventorkr1
@inventorkr1 Месяц назад
Good ✅
@JoseSilveira-newhandleforYT
@JoseSilveira-newhandleforYT Месяц назад
Very interesting, Clive! I bought one of those a few years back and it didn't work. I thought "another crappy Chinese product" and just set it aside. After this video, I must go through the boxes of broken electronic parts, to see if I find it - you got me curious enough to justify the effort :-)
@ricoma6037
@ricoma6037 Месяц назад
Thank you! 👍
@medienmond
@medienmond Месяц назад
Which version do you recommend and what exactly has to be fixed? Is it only the Diode that has to be removed in one version? Maybe you have a link to the better design of the two for me, where to ebuy this gadget with guaranteed possibility of a refund after the sale. ❤ your content !
@Legomanfred
@Legomanfred Месяц назад
Great video taking us into the "O-zone". Break down and explanation were very comprehensive. Thanks for this. Always interesting. 👍❤️💪
@chrisstorm7704
@chrisstorm7704 Месяц назад
I’m reminded of those plasma cluster units with a positive and negative set of carbon fiber brushes in somewhat close proximity. If I recall correctly, the effect was basically that of an ionizer with increased ozone production. Perhaps this was shooting for the same goal but coming from the opposite direction. It sounds like the diode makes it a worse ozone producer but helps it double as in ionizer. If ozone production is already on the high side, that might make sense, I guess.
@robertfitzjohn4755
@robertfitzjohn4755 Месяц назад
We have two Toyota cars, and the 12V sockets are switched off when the key is removed (or in the "off" position). This means they couldn't be used to power devices such as camping lights or ozone generators while the car isn't in use. I found this out when I tried to use an electrically powered tyre pump while my car was turned off.
@tin2001
@tin2001 Месяц назад
Pretty much every car ever turns off the lighter socket once the car is off. Some might delay it 10-30 seconds, but it goes off. Even sockets in the rear of large 4WD vehicles where they suggest a fridge might be used will have it switch off when the car is off. You don't want to flatten your battery by running unexpected high current devices.
@markfergerson2145
@markfergerson2145 Месяц назад
Copying a copy of a copy etc can work if the copier understands how the thing works, and what the critical values and characteristics of the parts are. Using what transistors that you have on hand can also work if you can substitute other parts to compensate but if you don’t test those parts to make sure they’re in spec, you get what Clive found.
@mikecurry6847
@mikecurry6847 Месяц назад
I honestly wouldn't use these in my car even with me not in it. I used to use reactive oxygen species to control mold in grow rooms and it reacts with plastic. It'll make various types of plastic brittle over time
@d.t.4523
@d.t.4523 Месяц назад
That's funny. All the companies are copying each other. Thank you, keep working.
@fredbloggs4867
@fredbloggs4867 29 дней назад
Only Fools and Horses reference (13:58) made me chuckle :)
@wisher21uk
@wisher21uk Месяц назад
Interesting gadget shame it didn’t work properly thanks Clive 😊
@twocvbloke
@twocvbloke Месяц назад
Always fun trying to diagnose faults caused by basing designs on 14th generation copies of an original and using whatever components are to hand that looked right... :P
@bigern73
@bigern73 Месяц назад
I was totally lost until the "wee dot"
@paulvale2985
@paulvale2985 Месяц назад
🤣
@Woffy.
@Woffy. Месяц назад
"The pale Black dot" ? What would have Carl Sagan have made of that.
@grezdh
@grezdh Месяц назад
Wohoo a new video came...
@georgeemanson
@georgeemanson Месяц назад
Clive...interesting video....... if you don't recommend this unit..... what unit do you think is best to buy for your car?
@smalcolmbrown
@smalcolmbrown Месяц назад
Thanks :)
@crystalsoulslayer
@crystalsoulslayer Месяц назад
Clones of clones of clones... A game of Circuit Design Telephone. I think there was an episode of Star Trek TNG about why cloning clones is a bad idea.
@sebastian19745
@sebastian19745 Месяц назад
That rectifier circuit is strangely similar to the voltage doubler used in an microwave oven to power the magnetron with HV. Basically rise the 0V to the peak of the output voltage if I am not wrong.
@bigclivedotcom
@bigclivedotcom Месяц назад
But just the peak voltage, it rides on top of the peak AC voltage too.
@rucker69
@rucker69 Месяц назад
That's a weird looking shotgun cartridge.
@robinbrowne5419
@robinbrowne5419 Месяц назад
When I first jabbed my thumb on this video it somehow ended up at 6:00 minutes. My brain immediately saw RYOBI and I was convinced that this was a schematic of a Ryobi drill complete with 12v battery connection. When Clive started saying "This is a classic Royer oscillator" I was thinking "What on earth is Clive yammering on about" and I was even about to leave a comment that Clive must be off his rocker. Fortunately, after reading some of the comments, cooler heads prevailed. Lol.
@erichpwagner
@erichpwagner Месяц назад
Doesn't that diode clamp the mesh at one diode drop above ground positive and allow huge negative peak voltages, so it kind of is a negative ion generator?
@goodh2o
@goodh2o Месяц назад
Confession is good for the soul.
@tonymahon8723
@tonymahon8723 Месяц назад
Wow, I bought something like this years ago. It has a nearly identical circuit except that it was meant to produce negative icons. It has a carbon fibre cluster instead of a neon. They use a 3mm led for the blue glow. I couldn't feel a real difference so I threw it in my odds and sods bin. Now after watching this video, I decided to look at it again and the carbon fibres are nearly nonexistent. Thanks for this peek into how this unit works (I now know it's not a ripoff), and thanks for all the effort you put into all of your vids. Cheers mate! 👍
@SullySadface
@SullySadface Месяц назад
I dig that pen
@philoso377
@philoso377 Месяц назад
Nice video and presentation. Without the diode the O3 element is presented with E volt ac and with the diode the O3 element is given 2*E volt dc, 50% duty cycle. If O3 requires ac operation, remove the diode. For dc? Keep that diode.
@subigirlawd_7307
@subigirlawd_7307 Месяц назад
Imagine having Clive as a teacher and failing electronics class becuase I keep forgetting the wee dot on my schematics reports...😢
@bigclivedotcom
@bigclivedotcom Месяц назад
If I was marking the test papers I'd take a relaxed but sensible view.
@vhfgamer
@vhfgamer Месяц назад
I want something like this to get rid of the horrible air freshener smell that someone put in a used car I purchased recently. I tried leaving the windows open for a few weeks, but the stench still remains.
@nathantron
@nathantron Месяц назад
Ya know... We haven't seen much burning of things lately. Maybe you should look into some more naughty Chinese hardware. XD
@Woffy.
@Woffy. Месяц назад
Ahhhhhh " Humble Pie " , best eaten when fresh
@AgentLokVokun
@AgentLokVokun Месяц назад
I had something like this before. It was a flashlight with a 12v male car charger end on the other. It has some lithium cell on the inside. Anyways, it was a gift for Christmas and the only way to charge it was plug it in the car. So I was warming up my car and plugged it in. Thing started on fire. I suspect the battery was installed backwards and when it charged it went nuclear.
@andygozzo72
@andygozzo72 Месяц назад
2sc945 is a very common type, listed as audio amplifier and low speed switching, and general purpose use, i've 'scavenged' many from scrap equipment plus previously bought some new for a repair on a 'portable' pc ..
@bassblom
@bassblom Месяц назад
clive, can you explain this.. I got me a cheap aliexpress CO2 meter. a few weeks before I had a way more cheap ioniser. just curious I placed the CO2 meter about 30CM below the ioniser.. oops, it raced from 430 tot over 1500 in no time and started beeping.
@bigclivedotcom
@bigclivedotcom Месяц назад
It's possible the electrostatic charge was affecting the sensor.
@MasterBakerVideos
@MasterBakerVideos Месяц назад
Could you do a vid on "EL lights"? There's these string shaped lights powered with 3 v batteries or 12 volts. Apparently uses high voltage converted.
@bigclivedotcom
@bigclivedotcom Месяц назад
They usually use low frequency (100Hz) AC at enough voltage to hurt. The output is usually very dim and gets dimmer rapidly over time.
@umbrellacorp.
@umbrellacorp. Месяц назад
When you can't roll down your windows buy this. And get out of your car.😏👍💯
@terrym1065
@terrym1065 Месяц назад
Does the color of the neon gas make any difference in the coronal discharge? Blue as opposed to Pink? 😉
@bigclivedotcom
@bigclivedotcom Месяц назад
The gas is just there to couple current to the inner glass wall. They could be any colour.
@Broken_Yugo
@Broken_Yugo Месяц назад
I think an ordinary neon filled NE2 would work here, blue everything is just the style of the time.
@mattyb7736
@mattyb7736 Месяц назад
Yep, sure does. If you use a pink Neon lamp you must also have fluffy dice and be driving a pink caddilac and be wearing leopard skin pants, otherwise it just won't work 😂
@sarkybugger5009
@sarkybugger5009 Месяц назад
@@mattyb7736 And a girlfriend called Tracey?
@mattyb7736
@mattyb7736 Месяц назад
@@sarkybugger5009 i was thinking of the pimp in magnum force, but your comment works 🤣
@mmmm768
@mmmm768 Месяц назад
Hi bigclive
@voltare2amstereo
@voltare2amstereo Месяц назад
Does the neon have to be blue? Can a normal neon work if wrapped in mesh
@bigclivedotcom
@bigclivedotcom Месяц назад
Yes. But it has to be high frequency and high voltage.
@AlaskanInsights
@AlaskanInsights Месяц назад
I was never a big fan of oscillators like that. my instructor would wallop me upside the head and send me to the deans office for more corporal punishment LOL.
@Quickened1
@Quickened1 Месяц назад
"I don't know if you'll hear this" 13:36, my tinitis kicked in...
@GothGuy885
@GothGuy885 Месяц назад
very interesting way to generate Ozone using a neon bulb! I have never seen this before. I am used to the needle or carbon fiber method
@sootikins
@sootikins Месяц назад
Needle or fiber is for ion generation. Electrodes separated by dielectric barrier (like the device in the video) are for ozone generation. Two different though similar processes.
@janami-dharmam
@janami-dharmam Месяц назад
this is the classic lab technique to produce ozone- it is called silent electric discharge. oxygen molecules get dissociated at the glass surface and then they attach to another oxygen molecule. The needle attached to a high voltage produces very little ozone but useful for producing negative ions - electrons are emitted and they attach to the gas molecules. Because the circuit is not completed, the current is going to be very low.
@frederick6008
@frederick6008 Месяц назад
How many amps does it draw? Would your battery be dead in the morning?
@bigclivedotcom
@bigclivedotcom Месяц назад
I wouldn't leave it running for a long time
@dcallan812
@dcallan812 Месяц назад
well I guess if you feck up the design and only find out once you had 50000 made you might as well try selling them to unsuspecting ebay customers. 🤣🤣🤣🤣 great video 2x👍
@snakezdewiggle6084
@snakezdewiggle6084 Месяц назад
I'd rather issue a recall, fix then, and learn from my mistake. Sales statistics says, good-wiil = Brand trust = loyalty = Money. It's printed in bold at the top of page 3. How short-sighted you are.
@jnharton
@jnharton Месяц назад
If it's just a useless item and you just scam some people you're a jerk. But someone who "pawns off" something that's genuinely dangerous on the unsuspecting, you might end charged with homicide. --- It's worth thinking twice about the consequences.
@_..-.._..-.._
@_..-.._..-.._ Месяц назад
@@snakezdewiggle6084he’s talking from the pov of someone that makes dangerous cheap Chinese electronics in the first place. They aren’t exactly UL approved, so I agree that they said “whatever, just ship them out for cheap”
@_..-.._..-.._
@_..-.._..-.._ Месяц назад
@@snakezdewiggle6084these are unbranded or fake names products. There’s zero brand recognition in the generic electronics world.
@snakezdewiggle6084
@snakezdewiggle6084 Месяц назад
Careful now, your ignorance is showing.!... Are you all afraid of money.?
@matthewmiller6068
@matthewmiller6068 Месяц назад
"stripping atoms apart" well if it did we might have a new most dangerous device on eBay... the fission air cleaner?
@simoncoker3180
@simoncoker3180 Месяц назад
Huh huh, Clive draws a GILF
@rocketman221projects
@rocketman221projects Месяц назад
You don't need any fancy equipment to measure low resistances. Just pass a known current through the device while measuring the voltage drop and calculate the resistance with Ohm's law (R=V/I). Be sure to use a 4 wire connection to get an accurate measurement.
@mikebond6328
@mikebond6328 Месяц назад
How does one use a 4 wire connection?
@rocketman221projects
@rocketman221projects Месяц назад
@@mikebond6328 Measure the voltage from the point you want to calculate the resistance from. Connect the current source to the device under test separately. That way you are not measuring the contact resistance and test lead resistance. Look up "Kelvin connection" for more information.
@allenlutins
@allenlutins 27 дней назад
@@mikebond6328 That requires a multimeter capable of "4-wire measurement". Bench units often have this - handheld units seldom do.
@N100NXX
@N100NXX Месяц назад
What would be the ideal to use in a vehicle?
@rohitkhanna4487
@rohitkhanna4487 Месяц назад
no link for buying this unit.....would appreciate if there was a link to the listing....
@cuteraptor42
@cuteraptor42 Месяц назад
It's just a 1.2W car heater, the design is fine
@curtishoffmann6956
@curtishoffmann6956 Месяц назад
Autopsies! Dr. Coroner BigClive, we need autopsies!
@KJ6EAD
@KJ6EAD Месяц назад
What's the minimally invasive way to make it work?
@melwick04
@melwick04 Месяц назад
What about the osram in car air purifier? I’ve seen it dotted around in various shops, I’m sure I read it claims UV filtration, would make an interesting video
@bigclivedotcom
@bigclivedotcom Месяц назад
Already done. It claims to use photocatalytic cleaning.
@ralphj4012
@ralphj4012 Месяц назад
Presumably, had this device been powered and worked, there would have been more than one discharge when the driver unscrewed the top (which looked far too easy).
@u.e.u.e.
@u.e.u.e. Месяц назад
Sell it to a flatearther and tell him he can use it for desinfecting his swimmingpool! 🤪🤭🤣
@BedsitBob
@BedsitBob Месяц назад
You might struggle to run it with the car unoccupied, because many cars have the cigarette lighter socket wired through the ignition circuit, meaning it isn't live when the ignition is off.
@vhfgamer
@vhfgamer Месяц назад
I have yet to experience a car like that.
@BedsitBob
@BedsitBob Месяц назад
@@vhfgamer You evidently don't drive a Mk7 Fiesta.
@vhfgamer
@vhfgamer Месяц назад
@@BedsitBob The heck is that? Some sort of italian car?
@BedsitBob
@BedsitBob Месяц назад
@@vhfgamer It's Ford. haynes.com/en-gb/sites/default/files/styles/unaltered_webp/public/6407_Fiesta_model_pic.jpg?itok=nOHWQJ3e&timestamp=1654082555
@boden8138
@boden8138 Месяц назад
If only they had paid the Big Clive design consultation fee. 😢
@oldfatbastad6053
@oldfatbastad6053 Месяц назад
clives drawn neon lamp looks like jeremy beadle giving the middle finger.
@BRUXXUS
@BRUXXUS Месяц назад
Do you think this might have been originally intended as, or design stolen from a small negative ion generator that they just tried to repurpose into an ozone generator?
@bigclivedotcom
@bigclivedotcom Месяц назад
I think it might be a universal PCB.
@Lvvcassss
@Lvvcassss Месяц назад
Dud on arrival :)
@paulkroon4931
@paulkroon4931 Месяц назад
What confuses me about the schematic is that the zero line at the bottom connects to the coil that drives the ionizer bulb. It is a zero line, right! No wibbly wobbly electric signal there.
@bigclivedotcom
@bigclivedotcom Месяц назад
The zero volt line is just the circuits general reference line.
@richardbriansmith8562
@richardbriansmith8562 Месяц назад
Awesome Video Big Clive🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂🙂
@cooperdove9929
@cooperdove9929 Месяц назад
I just wish that this wasn't completely over my head 😔
@bigclivedotcom
@bigclivedotcom Месяц назад
Don't worry. If all falls into place over time.
@anonymus1234_
@anonymus1234_ Месяц назад
does ozone smell lemony? just wondering
@bigclivedotcom
@bigclivedotcom Месяц назад
It smells bleach-like.
@pizzablender
@pizzablender Месяц назад
Is that device meant to get rid of the "dead car smell"? Perhaps exchanging it for "new car smell"?
@bigclivedotcom
@bigclivedotcom Месяц назад
It does attenuate stale smells.
@hugegamer5988
@hugegamer5988 Месяц назад
So if it’s a clone of a clone of a clone, how long before it starts to resemble a telephone?
@LukaSauperl
@LukaSauperl Месяц назад
Why's the pen called Sign pen? I have two of these, because I thought that they would be quite thin, but they turned out to be quite thick! What am I not understanding correctly?
@bigclivedotcom
@bigclivedotcom Месяц назад
I'm not sure why they call it a sign pen, other than possibly making it for drawing small signs. It is designed to produce a thick line. They also sell harder tip versions that do a much thinner line.
@chrishartley1210
@chrishartley1210 Месяц назад
If you take the diode out, wouldn't that mean that the neon bulb is operating on every cycle rather than every other cycle? Perhaps the original designer found that it made the neon bulb burn out too quickly or generate excess ozone and put this in to reduce the strain/output. This was then copied into the production of this unit with no actual knowledge of what was happening.
@bigclivedotcom
@bigclivedotcom Месяц назад
The neon is running at extremely low current. The AC is required for proper operation of a dielectric barrier corona discharge generator.
@asmotaku
@asmotaku Месяц назад
Sir Clive, why did you draw a crying little ghost @2:10 ?
@Cassandra_Johnson
@Cassandra_Johnson Месяц назад
Could this drive elwire?
@sootikins
@sootikins Месяц назад
Doubt it. The frequency is way too high. My semi-educated guess is that the EL wire would light up insanely bright for a few milliseconds then go out and never light again.
@bigclivedotcom
@bigclivedotcom Месяц назад
EL wire is a much lower voltage and frequency.
@PenryMMJ
@PenryMMJ Месяц назад
Interesting device. If you really want to add some ozone inside your car, isn't it easier to just open the window?
@bigclivedotcom
@bigclivedotcom Месяц назад
Yes. But not always a good thing on a crowded road or in hot climates.
@yuumi925
@yuumi925 Месяц назад
what if u use those translations from a old florescent light bulb?
@bigclivedotcom
@bigclivedotcom Месяц назад
The ones in CFLs might work, but are quite specialist.
@oldbatwit5102
@oldbatwit5102 Месяц назад
Yes yes but.... Will it surge?
@jadenhuibregtse501
@jadenhuibregtse501 Месяц назад
I believe they were missing some diodes.
@opexo
@opexo Месяц назад
ebay link please?
@farmazooticalz
@farmazooticalz Месяц назад
This is the same broom it's had 10 different handles and 12 different brush heads 😂
@allenlutins
@allenlutins 27 дней назад
Ship of Theseus
@72polara
@72polara Месяц назад
I wonder what would happen if I plugged one of these into my positive ground DeSoto.
@bigclivedotcom
@bigclivedotcom Месяц назад
It should work OK if the socket is wired with the correct polarity.
@Broken_Yugo
@Broken_Yugo Месяц назад
This might be the first time a cheap Chinese thing on here could stand some more Muntzing rather than less.
@asiano3385
@asiano3385 Месяц назад
11:11 I think it would get really interesting if this device was stripping atoms apart when powered in a vehicle.
@sootikins
@sootikins Месяц назад
Kinda like having your very own Mr. Fission
@fredfred2363
@fredfred2363 Месяц назад
Using the (isolated) ht output from a microwave transformer, across a plate of glass with two foil electrodes- doesn't work. No ozone. Nothing. Can't figure out why.
@bigclivedotcom
@bigclivedotcom Месяц назад
I'd really recommend against using a microwave transformer for anything like that. They are the biggest electrical killer in modern homes. The raw high voltage output may actually be too low for anything but the thinnest glass. A neon sign transformer would work better for something like that. (Also capable of giving a strong shock.)
@TechGorilla1987
@TechGorilla1987 Месяц назад
I would love to have a legit one of these. What might one search for to find such a thing?
@PavelNygryn
@PavelNygryn Месяц назад
​@@benjurqunov Usually to kill bacteria and fungi/mold living there. Most likely in seats and in the floor carpet. It also fights odours. Good idea is not to be inside while you "sterilize" the interior.
@bigclivedotcom
@bigclivedotcom Месяц назад
The tricky bit is finding a real one. There are many fakes with an LED and fake circuitry.
@TechGorilla1987
@TechGorilla1987 Месяц назад
@@benjurqunov Where in my comment did I mention that I want it for when I am in the car?
@benjurqunov
@benjurqunov Месяц назад
@@TechGorilla1987 So you admit you'll be using it inside a car ?
@TechGorilla1987
@TechGorilla1987 Месяц назад
@@benjurqunov Are you sure you're carefully reading the words in my initial comment? I mean, study it out. You're probably looking to school me on the dangers of ozone, and I guess that's a noble cause, but I neither desire nor did I ask for your concern.
@holderbee7811
@holderbee7811 Месяц назад
It's a real one.... but it doesn't work.... I would show you it working... but it doesn't work -That's what someone said
@baratono
@baratono Месяц назад
Ozone in your car? Say goodbye to your weatherstripping...
@vhfgamer
@vhfgamer Месяц назад
Assuming you have weather stripping to begin with.
@zindi1138
@zindi1138 Месяц назад
how odd
Далее
Very advanced Indo street light
26:01
Просмотров 152 тыс.
МЕТ ГАЛА, что это было?
1:09:17
Просмотров 254 тыс.
Я СКУФ!
06:12
Просмотров 971 тыс.
Sony Watchman TV FDL 3500 Repair
23:40
Просмотров 192
Inside a "30A" remote control - with schematic
16:55
Просмотров 76 тыс.
Connecting Solar to the Grid is Harder Than You Think
18:48
Atari STfm - Fixing the Memory
21:48
Просмотров 2,2 тыс.
World's First SCREW-BIKE
23:04
Просмотров 1,8 млн
Bizarre traveling flame discovery
14:34
Просмотров 3,3 млн
Interstellar Expansion WITHOUT Faster Than Light Travel
21:14
Я бы сделал дешевле - Samsung Flip 4
1:00
The power button can never be pressed!!
0:57
Просмотров 43 млн
Теперь это его телефон
0:21
Просмотров 1,3 млн