Deep Dive: Milwaukee Impact Wrenches - Sharing My Top Picks 

Matt! I work in the engineering lab at Milwaukee Tool and I wanted to let you know that corporate just sent out their usual “Milwaukee in the news” email...and it highlighted and had a link to THIS VIDEO in it!!!!!! How cool is that?

You sir, have massively helped me decide which tool in the immense sea of Milwaukee offerings suits my needs. This is what a deep dive means and looks like. Thank you very much! Your content is amazing and well put together.

Hey Matt, hopefully these are back in stock soon apparently everything that is cool is on back order........

Matt, when using a 1/2" impact and needing to step it down @21:00 me and my friends call that adapter a "de-bigulator" 😂😂😂

Aaaaaand... it looks like I'm up till 12:00 am

Matt, settings 4 is for when you are removing a nut. It will apply full power but cuts the power and speed as soon as it sences the nut has broke free. I have the new M18 mid and it's amazing. I love your content!!!!

You know you're early when Matt's face is blurry.

I love my fuel lineup. Have tons of Milwaukee products. Auto mechanic, then went to electrical work, and back to mechanic work now so I have a good bit. I would never justify paying Mac or snap on price when Milwaukee is right there with them.

I clicked on the video so fast, it’s still in 320p. 🤣 not even done rendering yet. Great title. I’m here for the compact and mid torques. I also think the main purpose behind OneKey is inventory and asset tracking. Which also offers geofencing, to keep track of your tools when you may have 10 or more tools on a big job. If one walks off, you get notified.

Watched a whole lots of video, and this one points the way to buy. Great works

Matt - I can’t tell you how useful this is. I need an impact for wheel removal in the garage, and another for things in / around the house. I am ordering a few from you now, thank you!

Extended anvil allows me to put a double side socket on it for working on 2 cars at once. When taking off tires saves time with taking off lugs... if you have a shop that can deal with the flow

I have compact in 3/8 and 1/2 in mid. Ill be adding 3/8 in mid torque just for conveniences. Or both if Depot does some crazy deal with a 1/2 compact and a 3/8 mid. You never know.

Nice review Matt. I don’t think an extended anvil on the mid-torque would be very popular, as it would limit its use in tight spaces. A way around this is to use extended impact sockets like Facom make. The mid-torque as shown here looks ideal. I’m sure you’ll soon have custom branded Obsessed Garage Milwaukee power tools in blue!

Does Mike prefer the smooth head on the Milwaukee hammer or the milled face and what size of hammer in oz ?

They are speed and torque as u go up in number torque gets greater but number 4 is for bolt removal once you break the bolt loose it cases the tool to slow down

Love the Milwaukee videos....keep them coming

Matt: "Even though I do wrench on my cars, I don't do it every day" Tavarish: *single tear rolls down cheek*

Looks like he decided to keep the civic...

This video is bad for my bank account

Havn't been this early where the title still says "diving".

Would like to see a "pro" collection below the master collection, with only one tool from each category. Also the 51 batteries to 2 charger ratio seems a little lopsided to me.. Maybe 30-40 batteries and 4-6 chargers including a vehicle charger

I have a m18 hex driver with a battery no charger but I want the mid torque dont know how I'm going to go about it I've been looking for a charger on the market place fb

You need a big boy, a small high torque fuel in 18, and extended wrench and 12 fuel wrench with auto shut off setting at the four torque setting. That's it.

Love the videos

What's going on with the Tesla ??

Wish I had seen this just before I spent $1000 on Milwaukee tools end of February... lol

Judges give it a 10

Hey Matt or the OG crew, what size anvil are you guys using for the M12 Fuel right angle impact wrench? If I could only have one, which one would you recommend? 1/2” or 3/8”? Thank you.

Serious question can you explain to me why you would ever need 50 plus batteries that’s absurd and a waste of money I could see haven 10-20 which I do but they die over time buying 50 at once for a og master set just means you’ll need 50 again once they all die which they will why not make price of entry less cut the batteries in half to maybe 25 because let’s be honest that’s where a lot of the 14k comes from In the cost of the og master set. Please respond

Guest speakers really need to spend ten bucks on a microphone.

Be honest Do you use these tools for anything but busting lug nuts.

HD still processing

nice title

360P quality? Nooooooo!

360p

Also what are you working on tow trucks? Who tf uses 1/2” for everything

This video hasn't even been available long enough for someone to have watched HALF of it, yet it has 2 dislikes. Losers.

SWEEEEEEEET !!!!!!!

Who needs sleep anyway

diving

360p gang

37:40 If only you had the metric system "1770 grams what is that? What kinda douche scale is this? Oh right just put a comma there, its 1.77 kilos..."

27:00 Torque Test Channel tested that You get more torque if You use battery with different cells inside ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ky5YRjz9lvc.html

Battery performance compared: ru-vid.comvideos?disable_polymer=true&itct=CBQQ8JMBGAEiEwiFgeThm5jvAhVN4BYJHdj9A9g%3D

This video as well as most of the commenters is absolutely hilarious! Grown men with nothing better to do buying tools just for the hell of it! Actual Mechanics will usually purchase their tools as they find themselves in a situation where it is needed, But in here it seems like everyone is just buying tools without even knowing when or why they will be needed! You have a garage and a compressor, Just purchase one 1/2 inch and one 3/8 inch pneumatic impact gun! And for when you need something portable just purchase the 20V+ CORDLESS INFINIUM™ 1/2" HIGH PERFORMANCE IMPACT WRENCH, It has 1600ft. lbs of breakaway torque and 850ft. lbs of working torque! And no I am not a salesman I am an actual Auto Technician who actually uses tools to support my family and my business! It is just crazy to see how many people are actually asking for advice on tools from a person who clearly has no real world experience! On top of that he actually went to a sales rep for the actual company, That is like going to a car dealership and asking the Salesman how good is the car! This is clearly a paid sponsorship, There is no way he bought all of those tools retail! If you are going to spend your hard earned money on some expensive tools you should really go ask a person that actually uses these tools on a daily basis!

lol,this a laughable video.knows nothing about them and barely uses them.complete joke.glad i just fast forward through it.when i didnt even see any M12 stuff shown i knew the video was garbage.ill move on

sorry but ingersoll rand impacts rule

First

diving