DeLonghi ECAM Fully Automatic Coffee Machine Restoration | DeLonghi Repair and Restoration 

World will be better with specialist like you ! Keep going don’t stop.

I just did what I thought was a "deep clean" on my Magnifica S this weekend. I should have watched this first!

When you polished the plastic cabinet I thought; - that´s taking it a bit far but you took it a step further when you touched up with the liquid chrome marker and I now see the end result as a brand new machine.. - Amazing.. At the moment I´m in the middle of a decision process of getting myself a Delonghi ECAM22110B. You did a good job on this one!

Thanks for the great video. I like Delonghi, ECAM and ESAM, I think these are currently the best and easiest serviceable coffee machines. Simple construction without unnecessary complications. All parts and components are well accessible and easy to replace. In 5 years I serviced them and repaired about 10 pieces. I have exactly the same Delonghi at home. It works for 6 years without failure. Sincerely.

Thank you,Master!!!You have gold hands!

Super. Dzięki Twojemu filmowi udało mi się wyczyścić również mój ekspres, krok po kroku. Po złożeniu zostało mi co prawda chyba z osiem śrubek jak u ruskiego zegarmistrza, ale wszystko działa. Bardzo dziękuję za te filmy.

Thanks for the great video! It helped me get the infuser put back together after an imperfect reinstall. When I did it myself, something broke and now I have to figure out what the tiny piece is (looks like the regulator, but it is not)! Your video helped me get the arms positioned correctly, but now I think the broken piece is causing it to not clear the pucks. Deeper into youtube I go!

Sehr gut erklärt, danke. Das kommt richtig. Habe zwar eine neue, aber Reinigen sollte man diese schon turnusmäßig. Die DeLonghi Maschinen sind einfach Klasse in Punkto auseinander bauen und das man für alles Ersatz bekommt.

Thanks a lot! Great video which created my delonghi repair more easier and now work perfectly again! Thanks!

Thanks very muck for making this video. I've always decayed when needed, but had not taken the machine apart before. I was shocked how back it was. Not anymore though. Anyone with a coffee machine should watch videos of their model like yours. Cheers.

Thanks for the video. cleaning the grinding repaired my machine! there was a small piece of wood in it. amazing how this came in.

Brawo! Instruktaż i precyzja wysokich lotów. Super odcinek i czekam na inne modele. Powodzonka

in my country they would tell you that you have golden hands.... very good job..looking at your work is relaxation for me 👏👏👏👍👍👍

Thank you for the detailed video. Because of you, I was able to repare my machine all by myself! Keep up the good work.

Just replaced the flash boiler in my ECAM45760. I will also do a maintenance clean like this, thank you!

Thank you. Your video really helped me to disassemble my coffee mashine and clean it properly! Without it, I would have never figured out how to do it without breaking something!

For me, my profession is servicing in other fields, but your job is excellent, it seems that you are immersing yourself in the task and reaching the production standard of quality. If all professionals worked this way, they could safely buy used machines, there would be no disappointment. Keep your good habit, sooner or later there will only be a need for such work.

This helped me a lot. Thank you. I had to replace the frothing control on my Magnifica S and although not exactly the same... this helped me know which parts to disassemble.

Awesome video, I love the attention to detail. I'm amazed you got all these parts for just 40 Euros. Here in the UK parts for these machines are fairly expensive and I don't think it would be economically viable to replace all the parts you did in this machine.

Great video, I love your patience and attention to detail, well worth seeing the video. I have cleaned my coffe machine before but never a full clean like this including all the major parts.

I got a Delonghi Magnifica ESAM 4000b in pretty much the same state. Nice job!

Great work. Simple and clear. Thanks a lot....

Good work!

I'm blown away by the precision. Just simply amazing work. Particularly how you removed the scratches from the plastic. I had no idea it was possible. May I ask, can you clarify the process a bit more. What you use to sand it down and the polisher etc... Thanks.

I bought a brand new one for 300 Euro! and I cant still operate it.🙃.. Wow... amazing to see how you did this #respect X

Great video, thank you!

Gratulálok,szép munka!

J'aime votre maîtrise! Bravo! Et merciiiiiiiii!!!

Great video and awesome machine! I did the same with my Delonghi ecam 23.420.SB after 17600 cups. It's still working perfectly. In my machine the infuser guide (small plastic thing that pushes on the lever of infuser) was broken so I 3D printed it. Anyway, great video! I was looking for something like that when I was renovating mine but without success.

excellent, a great help coffee machine back to working like new after following this video. Many thanks, keep up the good work

Great job! thanx for your videos! I allready did the same thing with 2 defective machines i recently purchased. If i may give you a tip: you also can give a watertank with limescale a vinegar bath for a few hours or even overnight, to get it completely clean. keep up the good work!

I have a Magnifica S the grinder is not working, so i bought a new one and also doesn't work, it soen't even grind in test mode. But it makes perfect coffe with powdered coffee. any idea?

Wow Good~~~~~!~ thank you

Respekt. Sehr gutes Video. Toller Job. Handwerklich sehr begabt. Das kann nicht jeder. 👍👍👍

Hi, MY ECAM 22360 somehow ended up with the tray and infuser stuck in. The on-screen message is insert the undertray, but actually I only need to take out the undertray. Do you know what's the looking mechanism for the tray, so I'll attempt to manually remove the tray maybe, and reinserted again? I've tried couple of reset methods and none of them worked.

you are supermen.... It's super... perfect ASMR...~ REPAIR ARTIST~!

Hi, thanks for the great video. Is that silicon grease you used on the o-rings at 5:49?

Finde das super das man ne alte Kaffe Maschine reparieren kann

Thank you Bro Your video has been very precious 💯

Just did the deep clean because the general warning light was on. I have no idea how the hell would it know if it's dirty "inside". Anyway, I hope it works . Will reassemble it tomorow. Either way , I learned something today from you, thanks. :)

State of Art. Polished body was the last drop, but then I saw chrome marker. Hat off

Amazing job 👍

Thank you for this video, please could I ask what screwdriver head you need to remove the tiny screws from the back (the first removing cover step you showed). Thanks

Nice Job ✌️

Very useful thanks

Great video. I was able to clean out a 2nd hand machine i bought recently BUT im encountering an error where the unit keeps thinking the coffee grounds container needs to be emptied when i try to make a coffee, when theres nothing in it. The sensor seems to be working fine. Any ideas what the problem / fix to this could be? Its an ECAM 13.123.b

Good work!.

Great Video! Thanks a lot

Exactly what I was looking for !!

Hi, thank you for the detailed instruction of the machine restoration. When I work on a coffee machine I like to do proper job, as you, but as business, there is no time for a such comprehensive job, when you have 10 calls/day....by the way, I like your washing thing, can you tell me the brand? I want something like that for small cleaning parts. Thanks

Great video. I have a ECAM23 460.s which is very similar to this machine. The hot water has stopped running through the spout and therefore the throth maker. Do you have any idea what it could be? I've tried to take the spout out to clean but its not easy. Thanks

Great detailed video as always! I got a bit newer model of Dinamica and unfortunately grinder do not work. Where do you recommend to start inspecting it? What could cause this issue? Unit brew the coffee using pre-ground with no problem. Thank you for any advice!

Mega praca wykonana !!!

Hi Guy, Do you have electronic board for type Ecam 22.110B ( delonghi)?

👏🏾 great job. I have a problem with my Delonghi Dinamica plus. Ecam 370.95.T the device gave a short circuit when switched on. do you have a video for that. replace the motherboard?

Great video! I have replaced my diffuser (behind the door and water tank) and the valve assembly (the part with 5 tubes attached), but still my machine will not pump water through. When I remove the supply tube from the valve assembly, it will pump water through the open tube. Is it possible the pump cannot generate enough pressure and needs to be replaced? I would also replaced the nearby regulator just in case? Any other thoughts appreciated. Thanks.

hello I have a dinamica and I have an error message "Malfunction" and the infuser is blocked, impossible to extract me what can I do. in advance thank you

Hammer 👍

I am looking for bean to cup SUPER automatic, with two bean hoppers... replacing a Keurig k4000 what do you think is a good value, about 10 cups per day at the office.

Hey, I have the same coffee machine and it's not working. Where are you based?

Exellent video thanks

I had one from a friend who looked to scrap it .Doesn't work of course but i will try to fix it. The engineer told is ERROR message on the electrical .I looked to diffuser and the rings are worn but with some life in them.What silicone you use for rings? Is a great video and I hope to fix my espresso machine too.

Bravo ! Very helpful. My Delonghi could not run coffee out of spouts, instead the water comes underneath to the coffee grind container. Any idea where the problem is ? I am trying to disassemble the machine. Cheers.

Thanks for the great vids. I’m curious how a test mode could be performed on eletta cappuccino top, an ECAM machine. Thanks

Great work. Very good movie. Thank you for your help, thanks to you my coffee machine works great again 🍻😉☕️

Very helpful video. Thank you for posting. I hope it will help me as well. My machine is no longer frothing well. The pressure coming out of the frother is very uneven; it fluctuates and goes up and down and it's very weak. Even when set to water only, it barely poors water but I otherwise don't think it's a pump issue since it still looks like it poors a normal coffee; it's just having problems when it goes on the frother side. Any idea what could it be? Hoping it's valve issue.

You have done a great job! Could you kindly specify which grease did you use in each section? I see the product in the description But I don't know which is use when.... Thanks

A job well done👍

Hi! I got a model close to this one and the lights, according to manual, tells me that the grinding is too fine (lights for ground container and alarm are flashing while the water tank one is steady). Tried to adjust grinding and tried the steam dial like suggested, but nothing works. I opened a part of it and I can add that I dont think water is coming out of the tank at any time. You have an idea of what it could be? :)

Hi I have a fully automatic coffee machine a Melita. Sometimes I have some bean residue in my cup. Any idea what could be the cause

great videos. Do you know how to remove the coffee spout from the Dinamica. I would like to give it a clean. I wouldnt want to go through major dismantling.

Hi. Great video. Very detailed however i couldnt spot the spring that broke on mine. Its a Retuning Action Lever Spring with hooks on either end. One has snapped. Any idea of where it could have been. It was hanging just above the "bin drawer". Thanks in advance

Where do I post mine for a service ??

So you're like My Mechanics but for coffee machines. Nice :D

Did you use special tool to remove back star screws? They seem to have a center piece that

Impressive. Good Work

Wonderful great video 👍

Hello! I have a delonghi dinamica, and my problem is it does not create coffee pucks/discs, so coffee it makes is watery very watery. And in grounds i get wet pile of goffee grinds not a puck or disc like use to. What can i do to fix it please? Thanks

Hi, Thanks a lot for all your vid I bought my DeLonghi Magnifica XS from Costco MN 120 v - 60 HZ 1250 W Type ECAM 22110 B P= 1.5 MPa (15 bar) When I took it to North Africa and by mistake I plugged it in 220 V I smelled little burning. I still can turn it on I can hear the coffee grinding all screen look good with green and yellow light but it doesn't dispense water nor a coffee. Please help.

Amazing iob !! I want to ask you about the coffee machine. The machine does not work normally. When I start it, the pressure switch light flashes intermittently and continuously. Delonghi macnfica blinking steam light.

Hi, I've almost the same model and I replaced the thermal fuses but when putting back together the adjustable coffee dispenser at the front is not staying up and whenever it push it up it comes back down so I'm wondering if I'm missing a part or spring that should how the dispenser position where you can adjust it up and down to suit the cup hight? Thanks

Thank you for this outstanding video. What is the most likely cause of excessive water dripping into the very small red "tray" in the front of the machine, visible when you slide out the grounds drawer? Thanks in advance for your help!

Awesome

Hi impressive deep clean. You display a spring at 3.17, where does it fit? Did you also replace infuser piston O-rings?

How did you remove the front plastic from the water tank before replacing it?

What did you use to restore the plastic ? I have one in silver can I use this to remove stains on the machine ?

Ich ärgere mich immer mehr, dass ich meine Ecam Cappuccino zur Verwertung verkauft habe. Es macht so einen Spaß Dir zuzusehen und das hätte ich mit meiner alten Maschine auch machen sollen. Zugégeben meine neue Magnifica S ist schick aber eben keine Cappuccino.

Sorry to bother you. I'm trying to diagnose my Magnifica S. Regardless of grind setting, I'm always getting around 28mL of espresso instead of 40mL. When the pump activates, it will pump for a few seconds and then stop, and then starts again. Do you know what is wrong with it?

What part would you replace if both coffee and water (in the initial and final rinse ) doesn’t come out? I get error like when coffee is too fine grinded. Thanks, this is very helpful. Great video , you are a king!

Thank you for the very detailed video. I have a DeLonghi ECAM 23210B which lately no longer extracts much water through the puck. Most of the water ends up in the drip tray and dregs container. This started a few weeks ago and rapidly became worse. Also the milk frother can only froth one cup of milk. For additional cups it just makes a very high pitch hissing sound and heat the milk up but does not froth it. The machine is old and has made many thousands of cups of coffee and I keep it because it makes very good coffee when it works. I know it is very difficult to diagnose with such limited information but do you have any suggestions what may be wrong? I am encouraged to overhaul the machine myself based on your video. Do you know where I can order a kit (in the United States) that contains all the needed O-rings? Thanks

Hi I've fixed my delonghi Ecam (similar to one in your video) by putting a new thermal fuses and now waking fine but when putting the milk frother and trying to make cappuccino it tells me "Turn Froth Dial on",I cleaned the frother and turned the froth dial left and right but still the same message comes up, any ideas? Thanks

This is an awesome video and well done on doing a great job of the restoration. Had a question on the inner tube mounting plate @ 9:02.... mine seems to have come apart and broken, but when I remount with the screw, it seems to keep it in place. Do you think this arrangement will be OK or do I need to try find that thin inner tube (with the 3 o-rings)? Thanks

watching all the repair tutorials related to automatic espresso units. if anyone has any information woudl you please leave a feedback whether these machines (mine ise delonghi ecam series) have any chance of their internal portafilters be modified to a single wall filter and if they indeed have a doubled layered one inside instead of single wall non pressurized.

Hi Do you have drawing to this machine?

Wow! you take it to the next level! :) Now how about direct tap water connection kit? That would sell like hotcakes! :)

Amazing job! When you use ultrasonic bath to clean those parts, and then resurfaced the plastic, you had me convinced do you are a serious pro at this. Did you work for DeLonghi or one of one of their repair shops? The familiarity you have with the parts of this machine is really detailed.

Hello, I have an old Delongi Magnifica S Smart Cappuccino and after replacing the brew unit and adding some lube to the gear for it, the machine now shows a General alarm when it turns on and wont brew, Sometimes opening the water door or power resetting it allows it to but its not consistent anymore, any ideas?

Hello! Can you give me some suggest? After replacing a damaged power module my ecam22.360.b don't start. Only white screen and display doesn't react.

good work

Thanks for the video I’d like to do such maintenance on Dinamica 255.15 Any maintenance kits available? where to find?