Тёмный

Delonghi Magnifica S Brew Piston Infuser Changing | Step by Step 

myworks
Подписаться 17 тыс.
Просмотров 41 тыс.
50% 1

If your cup is only half full when making coffee and the remaining water ends up in the collecting container or the coffee no longer tastes good, the brewing piston of your DeLonghi espresso machine may be leaking. The coffee is pumped through the brewing unit's brewing unit and directed to the coffee outlet at the front of the machine. The optimal coffee aroma can only be achieved with a functioning piston in the brewing unit. In this video I show you how to replace the brewing piston so that the machine works like new again.
M Y T I P - B O X
_________________
www.buymeacoffee.com/myworks ☕
www.paypal.me/ytmyworks
U S E D P A R T S
_________________
Torx 20 mit Bohrung: amzn.to/2W96RM2​
Schrauber Bit Set/Driver bits: amzn.to/3dFsf4F
OKS 1110 Silikonfett/silicone grease: amzn.to/3cX39eV​
O-Ring: amzn.to/3tQePNj
Brew Piston Infuser: amzn.to/40dPuc8
Coffee spout: amzn.to/40cXxG4
T O O L S
_________________
Xiaomi Mi Cordless Screwdriver: amzn.to/3EFdfQD
Proxxon 22295: amzn.to/32IeGyk
#DeLonghi​ #Repair​ #Tutorial

Опубликовано:

 

27 окт 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 74   
@kub1061
@kub1061 7 месяцев назад
Thanks for this detailed video !! Thanks to you I managed to solve my problem. I had bought the original spare part, but there was still water leaking. Thanks to you, I could see that the original part does not come with the o-rings ... I had to re-use the ones from the faulty part, but hopefully the problem did not come from them. Keep up the great work !!
@GiuseppeCorigliano
@GiuseppeCorigliano 2 месяца назад
Super video! Thanks for sharing it!
@user-ml6kv5zq9o
@user-ml6kv5zq9o 5 месяцев назад
Good job nice manual! Thank you!
@balemzelev4917
@balemzelev4917 9 месяцев назад
Buen día. Gran trabajo y muy informativo para quienes nos dedicamos a esto. Saludos de México.
@eduardm357
@eduardm357 3 месяца назад
Excellent . Thank you!!!
@Yernar_Ibrayev
@Yernar_Ibrayev 9 месяцев назад
Best master ever! 👍👍👍
@fredpoup
@fredpoup 3 месяца назад
Thank you ! 💯
@holgerreimer8321
@holgerreimer8321 9 месяцев назад
Auch ein exelentes Video. Das umfangreiche reinigen habe ich mir damals bei meiner Cappucino auch nicht angetan. Lieber auch einen neuen bei BND Kaffeestudio gekauft
@sat-tv-iptv-pcservice8113
@sat-tv-iptv-pcservice8113 3 месяца назад
Молодець, толковый репортаж 👍🏻👍🏻👍🏻
@owrzopu
@owrzopu 8 месяцев назад
Dziękuję!
@micklam4492
@micklam4492 28 дней назад
Hello, thank you very much for your video. I replaced a new brewing piston followed your video. Unfortunately there are still a few water drops in the ground collecting container after making coffee. Can you please advise if this is normal.
@quadzilla26b
@quadzilla26b 26 дней назад
God bless you king ❤
@chrisbrown7518
@chrisbrown7518 7 месяцев назад
Awesome video. Thank you so much. Unfortunately mine got worse and makes no coffee now so clearly i did something very wrong :(
@yt.myworks
@yt.myworks 7 месяцев назад
Did you replace the whole part like I did in my video? Check all connections thoroughly to ensure that they are properly connected.
@chrisbrown7518
@chrisbrown7518 7 месяцев назад
@@yt.myworks I replaced the full part and ran it with the top off to see why it wasn't working and the water was going into the part but just spraying straight back out. No water was taken in and distributed to any part. Steam wand and coffee didn't work at all.
@soulmate702000
@soulmate702000 5 месяцев назад
Ich habe mein Gerät erst seit 3 Wochen. Auf einmal tröpt das Wasser nur noch plus ich habe Wasser im Auffangbehälter. Ich habe weiches Wasser 7,6 dH und ich benutze ein Filter. Ist wahtscheinlich wie hier an der gleichen Stelle defekt. Ich mach mir die Arbeit aber nicht. Auch, wenn hier alles 1A erklärt wurde, das sollte nicht so schnell passieren. Sehr ausführliches Video, Danke.
@bakhrom
@bakhrom 5 месяцев назад
Woow❤❤❤
@weder278
@weder278 29 дней назад
Witam, mam problem w tym modelu ze cala woda leci do tacki po lewej stronie zamiast dyszami, zasylikonowalem łączenie ale nic nie dalo, sprawdzilem zaparzacz i termoblok, co moze byc przyczyna? Ekspres ma 5 lat, wymienic termoblok? Dodam ze na spieniaczu woda dziala ale tez troche cieknie
@nt123qwe
@nt123qwe 9 месяцев назад
I'm interested why you bought a new brew unit and didn't service it like you've done in the past. What were the problems that made you buy a new unit? Thanks for your great videos.
@yt.myworks
@yt.myworks 9 месяцев назад
Hello, sometimes the brewing piston can no longer be repaired if it is too badly damaged. On the other hand, replacement is much easier than repair.
@waldemarlakowski477
@waldemarlakowski477 6 месяцев назад
Dziękuję bardzo za super film😊. Przy okazji zapytam, jaka jest średnica oringów do wężyków teflonowych od podawania wody pod ciśnieniem które smarujesz? Pytam bo różnie podają 3,85x2x7,85 lub 4x2x8?
@yt.myworks
@yt.myworks 6 месяцев назад
Witam, orginalny rozmiar to 3,85x2mm jest ale trudniej dostępny. Osobiście używam 4x2mm też pasuje.
@waldemarlakowski477
@waldemarlakowski477 6 месяцев назад
@@yt.myworks dziękuję bardzo za odpowiedź 🤗
@manubravo8010
@manubravo8010 4 месяца назад
Hi thanks for your videos!! Following your video and instructions I still have an issue with a steam leak from inside the machine? The main steam tube is ok? I dont know why it happen?
@yt.myworks
@yt.myworks 4 месяца назад
Hi, where does the steam come from? Check all Teflon tubes for calcification or blockage.
@manubravo8010
@manubravo8010 4 месяца назад
@@yt.myworks The steam leak comes from the center of the module…I will check all the main tubes,but I might did something wrong when I putted everything together
@yt.myworks
@yt.myworks 4 месяца назад
Check everything again.
@user-ud5gf5iq6n
@user-ud5gf5iq6n 5 месяцев назад
My machine become. Louder when brewing how can I fix
@davidvalens1322
@davidvalens1322 2 месяца назад
where did you get the blue tool from to take off the tubes?
@yt.myworks
@yt.myworks 2 месяца назад
AliExpres or amzn.to/3VdPuIe
@robinsonmejia2416
@robinsonmejia2416 8 месяцев назад
Good morning, My Jura 6Z is not working is having exactly the same problem that you described in the video " Jura Machine Doesn't Make Coffee - Water/Coffee Runs Directly Into the Drip Tray" , however the pin from the stepper motor of drainage valve is completely out, Does it have to be out or in with the power off? in your video it is in. Do you think this motor is jammed? how can it test it? Thank you for your help😀
@yt.myworks
@yt.myworks 8 месяцев назад
Hi, when the machine is switched off, the valve is pushed out by the steel spring. In this state, the valve is closed. When the machine opens the valve, a loud clicking sound can be heard. Very often, the seals in the valve are worn out and the coffee flows into the drip tray. You can replace the gaskets or the entire valve with a new one.
@robinsonmejia2416
@robinsonmejia2416 8 месяцев назад
Thanks for the quick reply, is there any chance for me to send you some pictures? The pin I am taking about is not the one in the valve, is the little stepper motor shaft, the one that press the valve pin. In your video when you remove the brewer unit I can see that the motor shaft is in not out. In my case it is out with the machine disconnected. When the motor shaft is out then it press the valve pin and hot water goes to the drain when it is in then the valve pin is depress, it opens the valve and the hot water goes to the brewer unit, is this right?? 🤔🤔Thank you.🙏
@HowIsThat69
@HowIsThat69 6 месяцев назад
Hello there. My maschine acts Weird. It gives some wet pucks, not super wet, but definitely wet. When I then try to descale the machine, most of the water runs out on the table ;( do you think it’s this part that are defect? Will I be able to see where it leaks, if I remove covers on the unit and try to run a descale? Of course I’ll be aware of electric shock.
@yt.myworks
@yt.myworks 6 месяцев назад
Hello, you describe several problems that may have different causes. The wet puck indicates worn millstones or incorrectly adjusted grinder. Calcified heating casing can be responsible for water loss. And if the machine is more than four years old, then I generally recommend replacing the brew piston.
@HowIsThat69
@HowIsThat69 6 месяцев назад
@@yt.myworksmaybe its calsified beating casing, where is that located? I havent touched the grinder. Its from december 2021. But we have very hard water with alot og calcium in it.
@bobmcfc
@bobmcfc 15 дней назад
Hi, where do you buy your spare parts from? Thanks
@yt.myworks
@yt.myworks 13 дней назад
Hello, I often buy from: juraprofi.de, komtra.de, ebay und amazon.
@adamadamowski4934
@adamadamowski4934 8 месяцев назад
Dzien dobry. Mruga mi ciagle lampka poziomu wody. Po kazdym plukaniu i zrobieniu kawy to sie pojawia. Trzeba przekrecic pokretlo spieniacza tam i z powrotem aby zgaslo. Co moze byc przyczyną? Dzieki z gory za odpowiedz. DeLonghi Esam magnifica 3000b
@yt.myworks
@yt.myworks 8 месяцев назад
Witam, to oznacza że do układu wody dostaje się gdzieś powietrze. Sprawdź najpierw uszczelkę zbiornika wody w miejscu połączenia z obudową maszyny. Zbiornik musi dokładnie dolegać do obudowy. Usuń ewentualne zanieczyszczenia, często zbiera się w tym osad z wody.
@adamadamowski4934
@adamadamowski4934 8 месяцев назад
@@yt.myworks wlalem do zbiornika ocet z ciepłą wodą wczoraj i zostawilem na chwile. Przeczyscilem octem miejsce gdzie jest czujnik wody i obudowe kolo zbiornika. Właczam, plukam ikonka sie juz nie zaswiecila🤝baja
@deanwright2133
@deanwright2133 Месяц назад
I just did this repair with new unit. Water does not flow through the brewing piston. Any ideas?
@yt.myworks
@yt.myworks Месяц назад
Where does the water flow now? Where does the water collect?
@Polpet92
@Polpet92 9 месяцев назад
Hallo what do you polish with? in Jura videos?
@yt.myworks
@yt.myworks 9 месяцев назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4iV0qUWUKAY.html
@lubicekkubicek
@lubicekkubicek 9 месяцев назад
Can you make some video of service with 370.95?
@yt.myworks
@yt.myworks 9 месяцев назад
The Delonghi 370.95 has an almost identical structure, only the housing and the control panel are different. You can see how to remove the case in my other video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4iV0qUWUKAY.html
@BULI132
@BULI132 9 месяцев назад
Witaj. Nasz automatyczny ekspres kawowy Jura S8 będzie wymagał konserwacji. Czy podejmujesz się również takich zleceń? Jak mógłby się z Tobą skontaktować?
@yt.myworks
@yt.myworks 9 месяцев назад
Witam, niestety nie proponuję takich usług. Pozdrawiam
@mario24w
@mario24w 7 месяцев назад
W moim Delonghi Dinamica właśnie pojawiła się woda w pojemniku na fusy i mniejsze kawy były zaparzane. Poczytałem trochę i zauważyłem, że po wyjęciu zaparzacza w infuzorze jest woda. Sitko w zaparzaczu jest czyste. Ekspres na gwarancji. Półtorej roku nic się nie działo.
@yt.myworks
@yt.myworks 7 месяцев назад
Nie może być wody w infuzorze (przezroczysta część). To oznacza że pojawiła się nieszczelność. Po półtorej roku nie powinna pojawić się taka usterka chyba że ekspres używany był bardzo intensywnie np. 10 Tyś. kaw.
@user-ud5gf5iq6n
@user-ud5gf5iq6n 5 месяцев назад
Where do I get piston infuser ? Thanks
@yt.myworks
@yt.myworks 4 месяца назад
You can get it on ebay or amazon: amzn.to/40dPuc8
@przemysawkasinski443
@przemysawkasinski443 2 месяца назад
Witaj. Mój ekspres DeLonghi Magnifica S robi kawę lecz jest bardzo słaba nawet przy ustawieniu mocy na max. Wody leje tyle ile powinien nie ma wycieku do tacki z fusami jak na filmie. Czy przyczyną bedzie infuzor? Czy może być duża uszczelka na tłoku? Ewentualnie czy te infuzory co są na aukcjach do magnifica s pasują do wszystkich niezaleznie od modelu Ecam? Dzieki za odpowiedź pozdrawiam.😊
@yt.myworks
@yt.myworks 2 месяца назад
Witam, przypuszczam że przyczyną problemu będzie za krótkie mielenie ziaren które powinno trwać około 6-7 sekund. Polecam wykonanie czynności z mojego innego filmu: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OJWguSgyf4c.htmlsi=8bJ8E-Ovn1ob9pCU. Rzecz w tym aby zaparzacz i cała reszta dały się łatwo poruszać bo w innym przypadku ekspres redukuje ilość mielonej kawy. Uważaj aby starannie złożyć zaparzacz to jest bardzo ważne: ru-vid.commOxrMerZSFo?si=WGvZDaVGl9IUiG__ Dalsze wskazówki później. Pozdrawiam
@przemysawkasinski443
@przemysawkasinski443 2 месяца назад
@@yt.myworks Dzięki za odpowiedź. Co do zbyt krótkiego mielenia, krążki z kawą wyglądają ok, gdyby było za krótkie powinny być mniejsze? A i zapomniałem dodać że próbowałem robić kawę na dwóch różnych zaparzaczach i taki sam efekt.
@yt.myworks
@yt.myworks 2 месяца назад
@@przemysawkasinski443 Sprawdź grubość zmielonej kawy, powinna być drobna podobnie jak cukier.
@przemysawkasinski443
@przemysawkasinski443 2 месяца назад
@@yt.myworks wydają się być normalne . A czy infuzor odpada w takim razie?
@yt.myworks
@yt.myworks 2 месяца назад
Jak jest szczelny to tak, należy skoncentrować się na proporcji zmielonej kawy i wody.
@claudioviscomi248
@claudioviscomi248 3 месяца назад
Ciao ho una magnifica S macina il caffè ma non scende anche l’acqua.
@yt.myworks
@yt.myworks 3 месяца назад
It could be that a water pipe is calcified and clogged.
@claudioviscomi248
@claudioviscomi248 3 месяца назад
Quindi dipende dalla tubatura intasata?
@yt.myworks
@yt.myworks 3 месяца назад
@@claudioviscomi248 If the water pump becomes very quiet and the water doesn't run out anywhere, then yes.
@evarosbergcody572
@evarosbergcody572 Месяц назад
Good video, except that i must have broken the connector to the motherboard as this cannot be fitted back. Just falls off. Pity no attention was aimed at that. All i can see in the video is that it's pulled off
@evarosbergcody572
@evarosbergcody572 Месяц назад
Can you please advise if o-rings are already in the new brew unit. I didn't have them and the old ones didn't come out with the three plastic lines that attach with clips, so was presuming they were already in place?
@claudioviscomi248
@claudioviscomi248 3 месяца назад
Ciao c’è la possibilità di mandare un video così vedi il problema su WhatsApp. Grazie
@yt.myworks
@yt.myworks 3 месяца назад
yt.myworks@hotmail.com
@user-ud5gf5iq6n
@user-ud5gf5iq6n 5 месяцев назад
My machine become. Louder when brewing how can I fix
@yt.myworks
@yt.myworks 4 месяца назад
Where do the loud noises come from? Grinder, water pump or transmission?
@user-ud5gf5iq6n
@user-ud5gf5iq6n 3 месяца назад
@@yt.myworks it grinder, noise while brewing
Далее
Delonghi Brew Piston Infuser Repair | Step by Step
14:04
Пиратские котики
00:50
Просмотров 53 тыс.
vanne d'écoulement robot café delonghi magnifica S
14:22
DeLonghi Grinder Cleaning and Adjust | Step by Step
10:04
Пиратские котики
00:50
Просмотров 53 тыс.