DESTROYED Nintendo NES Restoration and Repair

Подписаться 3,2 тыс.

Просмотров 286 тыс.

50% 1

Follow OneMansTrash on Twitter for updates on new videos and sneak peeks at upcoming projects! / onemanstrash_yt
I bought this NES for $11.99 on eBay. It was listed as "junk," "broken," and "for parts only." It took a while to get it back in working order, but I think the final product is definitely worth it.
The 72-pin connector replacement I installed is called Blinking Light Win. It allows the cartridges to be pushed in straight rather than having to be pushed down after you put them in. This can help save the pins over time. You can learn more here: www.arcadeworks.net/blw
If you have any questions or comments, please feel free to leave a note below, or on Instagram!
#restoration #nintendo #asmr

Опубликовано:

26 сен 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 561

@OneMansTrash 3 года назад

I thought I was in over my head on this one, but it turned out great. Thanks for watching, and subscribe for more videos like this.

@cdoublejj 3 года назад

good work but you solder joints would ball up less and stick better with some flux, at least the way it appears on my end

@cdoublejj 3 года назад

great video, almost asmr except for the grindy bits, almost dosed off in NES DIY heaven

@OneMansTrash 3 года назад

@@cdoublejj I definitely need some practice with the soldering. First time I had dusted off the soldering iron in quite some time. The solder has flux in it, I thought that would be enough but clearly not. Thanks for the tip!

@DeaFBRED 3 года назад

I really Like the way You made this Video.. I am in the Middle of Soldering and Going through RF Box now..

@RestoreTechnique 3 года назад

@Alex Ko Agreed, I cringed at the soldering bit tbh. Nice work otherwise :)

@jnftech 3 года назад

Just for those playing along at home and might be new to electronics: the footage of installing the new large capacitor actually had the positive and negative orientation backwards. Looks like it was fixed off camera as it was correct in a later shot, but polarity of an electrolytic capacitor DOES matter, especially in power circuits like that one! So double check orientation before removing the old one to ensure the new one goes in properly.

@OneMansTrash 3 года назад

Correct! I realized my mistake quickly afterward and flipped it. All was well after that.

@evilskunk1 2 года назад

I saw that too. I was practically pulling my hair out when I saw it. It maybe nitpicking a little but when you drive a screw into plastic it would be good to first turn the screw backwards till it jumps or clicks, then drive it in to use the original threads to prevent stripping. Also, using a #1 Phillips driver with a #2 Phillips screw makes things clumsy and could lead to some catastrophic mistakes, like gouging a PCB and breaking traces. Other than that, good job.

@MattLowne 3 года назад

Sat all the way through, loved it. Great video!

@OneMansTrash 3 года назад

Awesome! Thank you!

@bender6316 3 года назад

@@OneMansTrash How come the game isn't pushed down like an actual nintendo? Something fishy there.

@weaponm249entity 3 года назад

You gonna bring a NES to Duna Matt? You better pack atleast 10 chutes

@TheDarkSide11891 3 года назад

Now you gotta do Jool-5 with the mass restriction being the weight of an NES.

@robertdanker6193 3 года назад

Me too!!😁👍

@someoneontheinternet3090 3 года назад

I can still clearly remember how it felt the Christmas morning when I woke up to find one of these. It's so strange to remember the anticipation of playing it for the first time while also thinking about how very old it has gotten.

@midmonobody411 2 года назад

Felt this in my soul

@Presbiter 2 года назад

those were the days !

@gregbutler386 3 года назад

Your dedication to restore that thing is impressive.

@CARDSSerus 3 года назад

I'll never get tired of seeing the before and afters from that uv trick

@kenpomroy7052 3 года назад

HOnestly, when I saw the bag in the nes I thought it was a bag of weed.

@thescreamingfish 3 года назад

Same LOL

@jamietaylor9579 3 года назад

Glad I wasn’t the only one

@tonic3898 3 года назад

lol, same. Also thought it might've been the reason the seller thought it was broken (until later)

@BB-vq6cb 3 года назад

Me too haha

@MrElvio12 2 года назад

Me too

@0186179821 2 года назад

So satisfying, thank you for giving this console so much love and respect.

@nostalgicgaming5944 2 года назад

I'm not sure why watching someone clean like this is so satisfying. I can watch this all day.

@SrhKane 2 года назад

This is an uplifting video restoring this old usage NES console cleaning and removing old dirt and rust that's been sitting inside there making it look like brand new. Playing old games kicking it old school.

@leosztlak 3 года назад

Could you please share the color codes of the paint you used in case someone also needs it ? Thank you.

@WTG84 3 года назад

Absolutely loved this video, the love and attention to detail is top notch. Also, very relaxing to watch. I hope you do more consoles 😁

@Dosenfurz9000 3 года назад

This was so relaxing and satisfying to watch! Thank you! Amazing work!

@OneMansTrash 3 года назад

Thanks so much!

@richardanderson5109 3 года назад

@@OneMansTrash Ah,nerts,it's called "patina" !!!!!!! ♿ 🇺🇸

@saltyswabbie3461 3 года назад

Oh wow! I found this really interesting too watch!

@OneMansTrash 3 года назад

I'm glad!

@josetrejo5144 2 года назад

This is so satisfying to watch. Great job brother.

@sipahi61 2 года назад

Absolutely amazing transformation, very impressed, great work !

@ericnorris4744 2 года назад

I will never doubt this man.. I said there's no way he can restore that to look and work like new.. well done sir

@Natures_Intentions 3 года назад

Great restoration and great video. Please make lots more of these kinds of videos very informative and appreciative.

@will9357 3 года назад

Some of those solder joints look like they could end up as cold joints... anything that ends up looking like a ball instead of a cone can be problematic... flux is definitely your friend when it comes to soldering and even moreso when it comes to desoldering! Still, you didn't do anything with the soldering iron that can't be fixed if you want to open it back up... or if it eventually breaks. But cosmetically speaking? Wow! Great Job!

@hektorlinko 3 года назад

You are Awesome! Very quiet and relaxing video I must say with your trademark style. Almost like a Bob Ross feeling. Nothing crazy just pure honest hardworking art on your desk and I love it. Much love and respect to you as you clearly know what you are doing and have a passion for the NES as well as other projects I've seen. You are totally Cobra Kai Material and know how to sweep the leg. A+++++ Thumbs Up!

@OneMansTrash 3 года назад

Glad you enjoyed it!

@feniX0nE27 2 года назад

This was very enjoyable to watch and love the rebirth of this NES!

@nerdypi652 2 года назад

I’m a geek for these old electronics and you doing this is super cool

@joshuaclark4662 3 года назад

So surprised over the paint and the coloring, excellent work

@preretro-gamingmitreini 2 года назад

Wow amazing work man!! Thank you for saving this NES and transforming it from junk to almost new condition. 😀👍🏻

@th3Reader 9 месяцев назад

You really outdid yourself there. Beautiful and very dedicated restoration of this gem :)

@RutgerHaan Год назад

Great job on this repair! Looks as new as the day it was made. Keep it up! 👌🏻

@keithcarlson7267 2 года назад

Amazing!! Just like how it came out of the box in 1986! Great work! 👍🏻

@williamgarcia5492 2 года назад

Utterly Satisfying Ooooweeee Absolute Awesome Job On This Classic Console

@thanasiskaravasilis7269 3 года назад

Found the video from your Medium acc. Great work, man! I just sat through the entire video. Dedication is contageous.

@OneMansTrash 3 года назад

Glad you enjoyed it!

@kingpolt98 2 года назад

Very nicely done man! Gonna clean up my system tonight!

@gregmoser2086 3 года назад

Very relaxing to watch. Enjoyed!

@OneMansTrash 3 года назад

Glad you enjoyed it!

@TransformersTalkRAW 2 года назад

Fantastic work friend! Truly a master craftsman.

@guristaex3119 Год назад

Thank you for giving it the love and attention it deserves 👍🏻

@nerdrocklives 3 года назад

Great vid and excellent restoration! Liked the subtitles and lack of talk. I watched at 2x speed so I appreciated that the text stayed on the screen for a while. Nice job. Do more!

@OneMansTrash 3 года назад

Glad you liked it!

@GoblinQueen001 3 года назад

So chill - style seemed fairly reminiscent of my mechanics stuff which is great. Subbed :D

@OneMansTrash 3 года назад

Awesome, thank you!

@benp3592 2 года назад

My god. I got one almost this bad as part of a lot (lucky the rest were better than expected). I am completely new to repairing very bad components but I figure I can learn on this one without fear of breaking anything further! Thank you for showing its possible!

@ChicagoRetroGamer 3 года назад

Wow, the difference in the before and after of this NES is shocking! Great job!

@gmugrumbach 2 года назад

Didn't expect paint to be a good way to go on these things but that was well done! Looks amazing!

@camomagic1 3 года назад

Loved this. Excited for more. Thanks

@OneMansTrash 3 года назад

More to come!

@Kane-B 3 года назад

This was so satisfying! I've subscribed.

@OneMansTrash 3 года назад

Welcome!

@artoodewtoo 3 года назад

Thanks for doing this! Looks awesome

@KaleSaladPeanuts 2 года назад

mm6....first you had my curiosity but after seeing one of my favorite games you got my attention!!!! keep up the good work.

@pr3st00 2 года назад

This is one of the coolest things I've ever seen on youtube!

@hanscakestealer8546 2 года назад

I was 8 years old and my parents brought me a brand new NES, because I kept renting them with my allowance. It was a great time to be a kid.

@dah72007 2 года назад

Excellent resto man!

@davidprater8402 2 года назад

Amazing. I thought for sure that system was trashed when I first saw it. You did a phenomenal job restoring it! How and where did you get the paint matched?

@natasharamos5067 2 года назад

This is DEFINITELY oddly satisfying indeed!! I couldn’t believe it with my own 2 eyes!

@imatellya2609 3 месяца назад

Nice job, came out fantastic!

@familymanlos8466 3 года назад

Oh man Wish I could purchase this NES. Great video

@Rojaniel 2 года назад

This is both catharsis and ASMR for my gamer head.

@greedygreggor 3 года назад

Great restore, such attention to detail :)

@darkspartan566 2 года назад

excellent work especially on that power board A+++

@ja2383 3 года назад

Awesome work!! Pristine craftsmanship! Did u know about removing the lockout pin because of the cartridges have issues with the contacts will give issues. Enjoyed video great work.

@lgtdiva 3 года назад

You do all the work I wish I could do for electronics. I carefully shop for my electronics and get very sad that I don't have the tools to fix them when they are super dirty and/or broken. Thanks for making this video. I find it very cathartic to watch you bring back to life what was dead.

@OneMansTrash 3 года назад

Glad you enjoyed it!

@richardanderson5109 3 года назад

Robint Tools ????,all you need is a screwdriver and a soldering iron, the rest is just house hold articles,toothbrush, Dollar Store screwdrivers, yeah, Dollar Store,good enough,vinegar,Etc . If you don't know how, watch videos how to solder, how to repair electronics,take pictures when you're disassembling it (whatever)so you know how to put it back together, it ain't rocket science !!!!!!! Your other stuff you'll just pick up along the way, multimeter,solder sucker, and other various electronic test equipment, but for this kind of job that's all you need,what I mentioned at the start !!!!!! Good luck !!!!!!! ♿ 🇺🇸PS check out Mr Carlson's Lab on RU-vid,the guy's a genius !!!!!!

@bigtrev4522 2 года назад

Bravo! Looks great!

@KevinMcgaw1988 2 года назад

Awesome stuff brother The 80s and 90s Good time

@CrestwoodRocks 2 года назад

It feels good to see something get restored

@MrSolidtiger 2 года назад

The blinking light win pin connector. I upgraded my NES with one too. And I love your vids Ducktor 🦆

@pcm2fchris 3 года назад

awesome vid! can’t find a blinking light win anywhere (broken link in description), BUT one can scrub a manufactured pin connector with bar keepers friend and it will sometimes restore it.

@veys_el_kara 3 года назад

Great Video! Love it, hoping to see more.

@OneMansTrash 3 года назад

More to come!

@robertdanker6193 3 года назад

Wow amazing!!! Might as well call that the Lazarus NES, since you resurrected it from the grave!!! Great Job!!!😁👍

@drew7481 2 года назад

YO. You just took me back to real moments 30+ years ago.

@davy1972 2 года назад

I find these types of restoration videos fascinating. That NES sat somewhere, in its inoperable state, for who knows how long. Then, someone who cares enough, and is willing, completely redeems it.

@arterialtribal 2 года назад

Impressive work! Great!

@giuseppelavecchia775 2 года назад

Questi sono i lavori che mi piace vedere,hai fatto un lavoro assolutamente PERFETTO!!,il tuo NES e' impeccabile,la console e' pari al nuovo.complimenti davvero!

@say1033 3 года назад

Just got 1 that looks about the same. Hope my attempt goes as good. Great video. Thank you.

@patrickrogers6956 2 года назад

I got one brand new in the box for $10 but yeah I could never restore stuff like you awesome dude

@cvanims 2 года назад

This one brings me joy.

@kloudmuka 2 года назад

Just marvelous work.

@cjmfebruary 3 года назад

This is awesome! I have a Magnavox Odyssey II console that needs to be brought back to life. I do not know enough to attempt to restore it and nobody local is willing or able to. I would love to find a way to restore it. I enjoued watching this video! Excellent restoration!

@williamedgerley3271 2 года назад

This is my ASMR loving the sounds

@KimTranjan 3 года назад

Amazing job! Congratulations!

@OneMansTrash 3 года назад

Thank you!

@javimvalero 3 года назад

Amazing Job!!

@ronaldhenson3379 3 года назад

I done that same thing to a dozen of Nintendo entertainment systems I clean the plastic top and bottom rf shielding the 72 pin connector and the contacts where the cardtridge makes contact the motherboard

@chris_h1990 2 года назад

Great video man

@ralfr.5974 2 года назад

Great Restoration👍🏻🤩

@GamuzaMF 3 года назад

Excellent restoration!! Nice touch for using Megaman VI to test it! One thing to note, try to get a better soldering iron. Subbed.

@OneMansTrash 3 года назад

Thanks, will do!

@kevlarvest7375 2 года назад

There's a tear in my eye. 👏👏👏

@sunburystudios8234 3 года назад

This video was fantastic. Subbed. Love the wordless style. Great stuff.

@OneMansTrash 3 года назад

Thanks for the sub!

@PopularMechanics 3 года назад

Great work!

@OneMansTrash 3 года назад

Wow! Thanks so much! I'm a big fan!

@thugboy1988 2 года назад

love this channel !!!!!!! MORE MORE MORE !!!!!!!!

@Davidevgen 3 года назад

removing those RF power boxes is such a pain in the arse to do. i know cause ive removed a few myself to recap. personally i would have replaced the voltage regulator and diode array wile i had that open. great video!

@ModoJogo 3 года назад

Perfect! Cheers from Brazil!! 😊

@smel6481 3 года назад

Good work bro!

@JoeyRomriell-bo4rv 9 месяцев назад

WOW!!! I wish I was you! Fixing video game systems

@khatske 2 года назад

that is really good for restoration!!

@jonathonshannon2034 2 года назад

I sent you a tweet asking about the custom paint you had made and wondering if you have a place you get it from or the color. Restoring one myself and need the paint to fully restore it. Awesome video though!

@reiatomsk 2 года назад

If he answer you (or if you have another workaround), please share with us. Good luck

@robd1329 2 года назад

Home depot color matches

@Penfold8 2 года назад

If you add a little fresh solder to the joint before you try to desolder it will help substantially in desoldering it believe it or not.

@achilleasza 3 года назад

Great job🙌

@brandonbialek6017 3 года назад

Awesome video, thank you

@MrKim-hh9fb 2 года назад

Video has healing properties, i feel real relaxed.Watched the entire clip.Awesome job

@mr-bu1um 2 года назад

Hello, great video, Quick Question ~ What type of video converter are you using for the a/v to hdmi? thanks

@SoarPro 2 года назад

Awesome video!

@SnakePliskinXX 2 года назад

Great video !

@alexandredevert4935 Месяц назад

The NES looks like it's a very well made product, and made to be repaired. Most parts can be removed and put back together, the injection molding parts are good, etc. Nice move with the urethane, that NES shall live 40 more decades.

@ZacCongo 3 года назад

I love this so much. I have some old hardware in the shed that I just can't let go of. I do so hope I can restore them like this some day. 😊 ❤️ Ps. I got here from Facebook. A post from CraftyPanda. 😊