Detounge, Balance, & Sharpen Tfl or Proboat Propeller - Before & After Prop Testing Pt1

Подписаться 17 тыс.

Просмотров 18 тыс.

50% 1

In this video I test a pro boat and TFL propeller to see which has the best performance characteristics, Which ever propeller didn't make the cut we are going to detong balance and sharpen that propeller with a with a magnetic propeller balancer. Both of these propellers show similar characteristics And are non lifting propellers once we detong one of the 2 propellers it will basically make it a medium to high lift propellers
This is part one of a 2 or 3 part series, gonna work on this propeller, try to get The best performance from this particular propeller we're gonna detong like you're seen in this video, then we're going round off the tips of the blades make the propeller smaller in diameter and just see what kind of performance we can get from modifying any particular prop
I had request to balance a propeller From one of my subscribers So here you go, this is kind of my way of doing a propeller balancing video Most prop balancing videos are some what boring so I tried to include some test footage Before & After, hope you enjoy comment if you like these types of videos comment if you don't like this type of video. Thanks for watching IRONCLAD RC Tinker Test & Tune Everything.
music HILL OF HOPE
music CHERRY BLOSSOM

Опубликовано:

8 сен 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@garrettkifer8332 2 года назад

Nice!!! I've always wanted to see a before and after of prop prepping.

@ricardoprieto7124 2 года назад

Very nice videos....helps me a lot, too much thanks for show all this work you do☺👍

@Sweetaccord 2 года назад

Prop balancing is an art. I have done many to a perfect needle balance. I have the same balancer as you. I can get into advanced balancing with a timing light but you are not competing so that's overkill but I will share one secret I invented to get a perfect balance. You need to put the balancer on a perfectly flat leveled surface. Use a level. Next is to get the balancers shaft on one side to a needle point. Then you need to balance the rod. One that is balanced you can begin balancing props. One trick I do is use putty on the prop. Just a real tiny piece and you can move it around on the prop to tell you where the weight is either side of the blade. I invented this method as it's like a dynamic balancing instead of guessig where on the prop it's heaviest and material needs to be removed. Hope that makes sense and helps. 😊

@IRONCLADRC 2 года назад

NICE TipS thank you very much..100% Black art you can get lost on a prop quick.. I kinda see where you're getting at with the putty just recently watched a video similar to what you're talking about, With the putty. He was using tape instead? The whole timing light thing is new to me though that's a pretty ingenious. Thanks for watching

@pavelack 2 года назад

@@IRONCLADRC Ive used the tape method when I was working in a hobbystore.. but it was to slighly balance helicopter blades after a crash

@Sweetaccord 2 года назад

@@IRONCLADRC Welcome. People are catching on to the putty trick I came up with 10 years ago. 😊

@Sweetaccord 2 года назад

@@IRONCLADRC There is one more advanced thing you can do but this is for the true serious racers. Once you have the prop balanced, you can now performance blue-print it by coloring the front of the prop completely with a sharpie and run it on the boat. The "loaded" areas on the prop when running will wipe off the sharpie whereas the "unloaded" areas will remain colored. With this you can remove more of the loaded areas to make the prop more efficient under load on that particular boat and setup.😊 Hope that helps.

@IRONCLADRC 2 года назад

Yes sir ive read and noticed after running a prop for long periods of time the prop will have discolorations on the loaded parts of the propeller. Man that's awesome I appreciate and I'm sure a lot of the guys watching my videos appreciate all the fantastic tips you've given thank you. I'm probably gonna try this out on my next video, thanks

@Kolsch221 2 года назад

Awesome video!!

@patty2Strk Год назад

your'e answering a lot of questions today haha ! thanks

@daddyclubrc Год назад

Not really trying to bump my channel but just wanted to say your diy videos are very helpful! I've watched a ton of diy videos to build my current insanity project. This video helped a lot with making the 9mm prop I just made for the ridiculously small wooden boat I hand made. 💯🔥 IRONCLAD RC 🌟🌟🌟🌟

@anytimeDrumvideos 2 года назад

I have noticed once I detounge one they are slower. I think we need to re cup the trailing edge more and put more pitch in the prop once detounging. I am doing the same trials as you lately with props. great video.

@HciContractor 6 месяцев назад

Im able to use my RC plane prop balancer. Nice job brother. It looked like a factory racing prop when you were done! I just got a U19 a guy sold it new in the box. It has never been opened! Our weather is so damn cold 🥶 I haven't ran it yet. Nice job!

@mildtowildrc7343 2 года назад

Dam good job prepping the prop👍I use the 3m sanding blocks and takes less off but tappers the tongue as you sand😁

@IRONCLADRC 2 года назад

Thanks brother

@wally6629 Год назад

Is a "Brass" Prop easy to Detounge, Sharpen, and Balance? You have down to earth real hands on VIDEOS. THANKS

@markbirkett9706 2 года назад

Hay Big B dig the channel most info i have gotten from all others combined built my first hydro in 1967 no rc freerunner any way my balancer like that gives a different reading if you rotate the shaft 180 degrees how much air gap do you run on the end of shift and magnet? Your right pushing the rod one side or the other helps If you look at the shaft. when you spin it it don't spin true every time got any cures thanks for the time and good luck Congrats on you and the miss on the soon to be boy take care Big B don't blink don't blink.

@IRONCLADRC 2 года назад

I like to run like a needle point on one side and on the other side round/dull point. Use the sharp side on the balancer magnet and the dull side run a gap. Play with the distance until you find where it's balancing at. Be patient.

@peteroosterhoff8850 2 года назад

Just tried yesterday a detounge on my best prop (even a bit smaller part), lost 2 mph top speed. I'm at the point of stop trying. Tried it to almost all my props (when for example running a bit to hot, slowest props, small damage, or when got squirly). Never got it to run faster though. I think it's to complicated. Still very qurious to see if you will find out what "the trick" is, so i will follow the uploads. Also think its nice you try to figure it out yourself instead of just buying a quick prop...

@IRONCLADRC 2 года назад

I'm on my 4th prop , 1 I'm still testing, 2 props I screwed up (trash) and the other I've gained 3mph with. Basically everything I thought I knew about props went out the window with the first 2 props. Lol. The more I read and learn with hands on testing the more Fascinated I become. Thanks for watching, good luck my friend

@ifly65 Год назад

Try a thin flexible sanding disc on a dremel, its much quicker than filing by hand!

@IRONCLADRC Год назад

I've tried the dremel tried several sanding wheels, guess I'm old school. A good file will cut just as hard, with more precision

@kensutherland414 Год назад

Great stuff mate but could you please advise people of the dangers of breathing in dust from Berilium Copper props. Thanks

@IRONCLADRC Год назад

I was working on copper & stainless steel props. Berilum props are the dangerous ones

@xillianto 2 года назад

It still got a heavy side, have you taken any of the hub ? It when balancing any props. it should not lead into any position at all, even at if you got the blades to sit at that angle, prop should be able to stop at ANY position if it's completely balanced, this prop is heavy on the hub side (and if hub isnt balanced, you get false result on the blades aswell)

@IRONCLADRC 2 года назад

I've since gotten it balanced. Thanks

@ifly65 Год назад

APC and other airplane props do this exact same thing. Once you learn how to 'read a hub' they balance perfect. Like you said they shouldnt drop at all.

@joncaddell13 2 года назад

Hey Big B. Longtime listener, first time caller here. Has anybody ever put two props on one shaft? Is that a totally stupid idea? I don't ever see it, so it's probably not a thing -but I figured you would know. Not talking about a coaxial shaft either. Everything spinning the same way. Probably dumb ain't it? Keep fighting the good fight!

@IRONCLADRC 2 года назад

Nope I've thought about it before lol. I've been told the the props have to counter spin one another like a Volvo penna lower unit on a 1 to 1 to have any real effect. If we put 2 on 1 shaft it kinds resembles a jet pump propeller which doesn't do well on a surface drive. Maybe we will try it in a future video. Haha on 2s or three 3s. Do it for s>it's N Giggles. 😆 I know it will load the esc and motor alot of blade area in the water

@AL-ud2is 2 года назад

Did the boat feel smoother after balancing, less vibration? want to have a go at this balancing just to give bearings, prop shaft and electrics a easier time, not really bothered about picking up more speed

@IRONCLADRC 2 года назад

Yes yes it was smoother than before, the factory defect Caused a lot of vibration so yes for sure.

@swaldoski 2 года назад

A perfectly balanced prop should stop any where you move it.

@IRONCLADRC 2 года назад

Roger that.

@3Dmodelheli 2 года назад

Just got a proboat sonicwake, I'm wondering how you retrieve the boat with the fishing rod?

@IRONCLADRC 2 года назад

Some guys use a tennis ball on your line. I use a sinker, nothing fancy. Cast and hope for the best

@jasonlafromboise839 2 года назад

Why don't they just make the props like this to start with? Glad I came across your channel. Have a few boats and still don't get props

@IRONCLADRC 2 года назад

They do, most props have a cupped blades I reduced the size of the prop and was messing around with cupping I actually found out that I was doing it all wrong. Experimental process

@JohnMorawietz 2 года назад

0.4% slower after removing same or more area from the paddle while contouring for more rpm versus more push (search feathering prop) , lift meaning there's less of the prop wetted and what do you get for messing? You've helped with some perspective on prop mod-ing on the cheap. You want to go faster? you're not going to like the answer, spray on some no stick on the hull or wipe a light misting of wd40, told you you wont like it.

@IRONCLADRC 2 года назад

It's a learning process you don't become a doctor After your first surgery It's a long painstaking learning experience everything u touch a propeller everyone's different an a each prop needs a different cut /cup/

@patty2Strk Год назад

Question for ya ! So i just bought a TFL Pursuit 3660 1620kv / 120amp Esc 4-7s prop is 42mm D / 1.4P 2 blade copper . When i ordered it i also got some parts to hopefully make it quicker after giving the stock electrics a good run ahaha ! So here's what i got for a setup coming Sea King 180a esc / SSS 3682 V-2 1660kv so now i need some props for this setup but have no idea where to start and props ain't cheap lol also what you think of this setup ? and what you think i could get for speed out this setup ? 2blade 3 blade prop . Thanks

@IRONCLADRC Год назад

Good setup as far as electronics, that lower kv motor should turn so big props. What is your goal speed, racing, ovals ? Should be able to turn an Octura x447 or m447 with no issue. M447 is a medium lift prop so your boat will run up out the water (dry) dryer than the x447 good all around props. If your looking for all out speed ABC is the ticket.

@patty2Strk Год назад

@@IRONCLADRC M447 & X447 it is remember seeing those on ose ! My speed goal is 70mph wishfull thinking maybe haha! Witch ABC prop should i try ?

@mildtowildrc7343 2 года назад

Also where a mask doing these and gloves on your brass looking props or wet sand👀Cancer causing dust from those props🕵️‍♀️

@markbirkett9706 2 года назад

A man to that nasty sh t. @mild to wild

@brianbrissette9444 2 года назад

Brother BigB, how do you keep going, I have my brother-in-law that takes us out flying-boating-monster trucking, but I like working on my rc with other people around... how awesome would it be if are girls would be as passionate about RC! 🧑‍🦽BB