Nice work and nice explanation, I have Deye inverter 8KW single phase I’m very happy with it but my parameters settings are not good if the generator is working the batteries dose not charge in the day and in the night equally the grad
Good morning Sir, thanks in your valuable presentation. Magtatanong lang po ako about sa Deye at battery- Saan po ninyo nabili at magkano? Isa pa po, Ang existing na G.E. CB sa house ko ay may main 100 Amp at 6 branches,,, ang tanong ko sir saan ko dito i-connect ang Deye 5Kw Inverter sa AC in or AC out or may tamang idea na mas maganda at safe.Salamat po.
Nice sir!, Good day sir, Ask ko lng po if panu settings if wala pa ako battery , pero gagawin ko muna syang on grid , pero Hybrid inverter gamit ko po wala pa po kasing pambili ng battery, May iibahin po ba sa settings sir?
Sa battery setting wag kang mag select. Kahit mag select ka ok lang din kasi wala naman ma detect ang inverter na battery. Yong ibang video ko wala pa ako noon battery.
kaibigan thanks for your valuable vlog, can you pls explain how you mean "dead of discharge"? You said if the manufacturer recommends 80% dead of discharge, you set your battery to 75 dead of discharge. Pls. explain about it, thanks in advance!!!
Ang DOD ng batteries nasa brochure or manual included when you buy or you can ask the seller. If 80% yon lang ang maximum na gamitin mo or 75% mas tatagal ang life ng battery. Sa video natin 48v system tayo kung 24 or 12 v system ganon din just follow on the DOD - % voltage table.
Hi. My DEYE "Grid Charge" is NOT WORKING. Even if I set to Grid Charge (checked) in the Time of Use. What's the possible problem? I set the time from 00:00 to 05:00, Grid Charge Checked. But still during that time, my battery is still discharging.
Good day sir,alwys watchng ur vedios sir from cebu province. May konting tanong ako sir,kung magpower up ng deye sir,alin ang una e,on nah breaker sir?,yung sah breakr ng grid side,battery breakr or sah Pv breakr sir?.
Make it sure na wirings are correct MY PERSONAL PROCEDURE 1. Power on ang inverter cb sa grid then input the parameters 2. Power on cb ng PVs then sa Inverter side, then the push button ng Inverter 3. Then cb ng battery ( before switch on the cb mag series ka ng 5-10 ohms 5watts resistor to minimized big sparks ) TRY KO GAGAWA NG VIDEO NITO. SALAMAT & BE SAFE ALWAYS
Hello thanks for the video. I hope you can hepl me. When swich ogg the grid, i have 115V between L-PE and 115 between N-PE. How can resolve this question. In normal condition in italy we have 230V between L-PE and near 0 V between N-PE
In my set up my ground line of inverter is connected to the grid grounding and separated the grounding of PV panels about 5meters away. Our power system in Philippines in our area is Line to Ground 220V.
sir gud pm 2 string ba yan ang deye na gamit mo..tanong ko lang puede ba ako mag connect ng pv 3x 550watts every string,,sano masagot mo sir malaking tolong sa akin na baguhan..tnx
Boss tanong ko lang po pano kung ang lumalabas lang po sa generator ay “signal on”? Hindi po nag ssupply yung generator sa battery man o sa home load po.
Hindi ko pa na try sa generator but it should charge the battery as the main purpose ng generator. Hindi din clear sa Deye manual. Better switch off yong loads then observed kung mag charge ba sa battery.
Ano pong Ckt Bkr Amp rating recommended for 5KW Deye inverter. (1) sa PV to inverter??? (2) sa Baterry to Inverter ex. pag 5KWH ang baterry??? (3) Inverter to Load EPS??? (4) Inverter to Grid? ?? Pwede po pa advise. Thank you
sir ano po kaya ang possible reason why yung inverter nag alarm kahit sa monitor naman normal po every morning po nag alarm po ang inverter 10kw ang system po hybrid naka parallel
sir kapag sinelect mo yung time of use kahit di na ba icheck yung grid charge.susundin pa rin nya yung 60% tira sa 1 to 5am what if chineck mo yung grid charge sa tapat ng 1 to 5
sir idol ask ko lang po, may part na nalilito ako sa pv input voltage 100-500 volts anu po yan per mppt or para sa dalawang mppt yan? what will happen po kung sakaling sumobra sa voltage at current anu mangyayari sa inverter? meron ba syang protection something?
Sir ano po yung pinag kaiba sa setting na ZERO EXPORT TO LOAD compare sa ZERO EXPORT TO CT ? ano po ang function nya dun sa BACK UP LOAD at HOME LOAD.. baguhan lang po ako sa DEYE HYBRID ONGRID/ OFFGRID..salamat po
ZERO EXPORT TO CT - not to export or supply to grid. ZERO EXPORT TO LOAD - i did not try this but i think ALL POWER PRODUCED FROM SOLAR WILL BE SUPPLIED TO GRID
meron dalawang load. backup load at home load, ang back up load connected sya sa load terminal ng inverter, ang home load connected sya sa grid terminal in parallel sa grid zero export to load.. hindi sya magffeed ng power sa grid terminal.. which means zero export sa load at grid ibig sabihin sa load lang sya magpopower. no need na rin ng external limiter zero export to ct.. hindi sya mag eexport beyond ct sensor.. which means mapopower nya ang homeload pero zero export sa grid ewan ko kung maggets mo explaination ko..
@@elbertmartinez7494 theoretically pwede naman yong welding basta separate breaker 30 amps lang at our own risk, di ko pa na try. Pero pina ka safe isolate mo yong inverter pag may welding works baka may effect sa electronic parts ng inverter depende kasi yan sa designer kung kinonsider nila yan.
Sir pwede po ba mag run yung DEYE po na hybrid inverter using solar generation only to supply po yung emergency load? wala ka Grid supply and Battery bank. thank you
sir my features poh ba ang deye na pag umaga sa solar panel xa kukuha nang power at pg gabi sa batteries na nmn at pg ma lowbat kusang mag transfer sa grid nang consumption?
sir ask ko po. may roon po ako deye na 5kw hybrid bibili pa ako ng solar panel... pwedi na ba yong 4 na 450w na panel muna? at saka anong connection non? salamat po .
Hi :) sir, pa help naman. Nais ko ma achieve na setting sa DEYE 5K and 48V 100AH PowerWall . Battery will start and works in parallel with grid at 9PM Battery will stop once it reach 80AH discharge capacity. Grid will take over . At 8am Solar will start supplying the Load and and will also start charging the battery . Grid will help supplying the Load.
Gud day Po sir,, ask ko lng,, bakit namamatay Ang 5kw. Deye inverter ko... Mga 2 o'clock ng umaga..Hindi nman nag fault o walang nmang bown out... Bakit kaya Sir .. puwedi mo ba akng tulongan... Salamat Po...
Gdpm sir ano po ba ang diperinsya sa zero export to load at zero export to CT. DIY po ako sir ang setting ko po zero export to load tapos battery first..deye 5kw hydrid unit ko..ty po
Naka off grid ka ba? Naka on grid ako kaya di ko na try yong Zero export to load. Ang ZERO EXPORT TO CT kung grid tied then walang net meter para hindi maka supply sa grid.
@@jbhometech7590 salamat sir Isa pong tanong yung 320 amps na lifepo4 prismatic na battery Bali 16s 2p yun maging 640 amps na sya kaya ba ng 6amps active balancer?
@@jhorperez4411 ok lang yan mostly gigamit 5amps sa active balancer lagyan mo rin ng bms. Mas maganda din na may lcd monitor yong each cells. A BMS controls and monitors your whole battery on cell level niveau, disconnects the whole battery in case of over or under voltage and prolongs the life of your precious battery. An active balancer just balances your batteries, shovels energy from a cell with higher voltage to one with lower voltage.
Review mo all settings specially voltages and frequencies then observe mo sa DU during that time. Software updates or try to reset. Hindi ako naka experience na ganito kaya yon lang ma suggest ko.