The more detailed written review for the DF64 Gen 2 can be seen here www.tomsgrinderlab.com/df64-gen-2/ (grab your Guide To Espresso Taste Optimization while you are there, plus check out my other grinder reviews).
Nice review! I ended up buying an Olympia Moca SD last year thanks to your review. Thank you for all your hard work and sharing your results on various grinders! I’d love to see a more in depth video like this on the Moca SD to see if I can learn more about its capabilities. Cheers!
The Moca SD still remains one of my top three grinders for in-the-cup espresso, it's those Ditting burrs I guess. No plans to do a follow up review of the Moca SD sorry. I've got a bit of "review queue" with the DF83V, DF54, Niche Duo and Niche Zero plus the Gevi Grindmaster that arrived yesterday. Make sure you subscribe!
Nice review. But still can’t decide between DF54 vs DF64 gen 2. Which one is more recommended for home espresso? And what is your grinder suggestion for filter coffee on a budget? Many thanks
Fantastic deep-dive review Tom! I’m weighing this against the Varía VS3 Gen2 (which I know you rate highly) as my one and only grinder. Would you recommend one over the other (cost aside)? I value workflow highly over aesthetics, longevity/reliability, body over clarity, and drink both espresso and milk-based. Cheers!
Yes, cost aside I'd go with the DF64 Gen 2. The burrs are pretty amazing for espresso and quite good for milk-based (just grind a little finer for milk).
Thanks for your comment. Not if you just like straight espresso. I think the stock burrs in the Gen 2 give a more interesting (flavor seperation) that the ones in the DF64V. But if you have milk based espresso only then yes, the V has the edge and also for filter. Hope that helps.
Yes, is a fantastic grinder as I've had my Df64 Gen2 for some 4 months now its so much better than my older it replaced Actually liking the big bulky size, and out of habit I rdt my beans tho do find it holds a little retention so do use the billower function. Also came with dlc burrs which suits my medium + roasts for expresso..
I got this grider on the way. It was between this and the ode gen 2 for filter. I ordered the ode gen 2 burrs to install in my df64 gen 2. I hope they work. I got this because while I have a moccamaster and a Japanese ceramic pourover setup, but plan on getting into expresso down the road. I wish I could have afforded a 078s sculptor. I kind of wish I saw your review before I ordered,
Hopefully those burrs fit it okay. I will be very interested to know what you think once you've got it all up and running, so please remember to pop back and let everyone know. Thanks for your post.
@tomsgrinderlab unfortunately, I had to return the grinder. It was horribly out of alignment out of the box. I put the ode filter burrs in and they worked. However, I just couldn't get them aligned. I was also dealing with terrible clogging. I asked the seller after return and they said the burrs were very misaligned and a peice of plastic (forget what they called it) was bent and causing clogging and retention. I was charged $22 return shipping and 15% restocking fee. So, I don't know if I give it a go again or try for something more expensive and get better QC out of the box. I wanted a mazzer philos, but their early bird preorder sale wasn't available in the US. I was looking at the 078, but recent problems of users are piling up in their Facebook group. I just can't believe I need to spend over $1000 to get a properly QCd coffee grinder!
Hi Jose, I'm guessing you mean "Gen 2" (there Is an DF64 V2 which I don't recommend). Grind coarser than normal for filter ou don't like it you can swap a different set of burrs into it.
@@tomsgrinderlab If I am referring to the generation 2 of the DF64, I have it and I love it, perfect, I will take the advice, thank you very much, I also have the Baratza Encore ESP.
Hi, trank RU-vid for comparing different Grinders with the same kinds of burr sets i wonder if there is any difference between all 83mm burr Gründers Ranking on the same Burg Sets, like the ssp multipurpose or DLC versions and to See if the coating has impact on taste
Coating can have an impact of taste. 100%. I haven't done the blind taste tests with 83mm coated versus uncoated but I'd be confident, based on the 64mm differences between coated/unoated, that the same would apply.
Have you had experience with a Niche Zero? If so, how would you compare this (or the DF64V) with the DLC burrs to a Niche Zero for lattes (milk-based espresso)?
Yes I've had a few Zeroes over the years and I've kept one. Its still one of my favorite grinders. I find the Zero gives a very traditional, smooth, well balanced in inoffensive espresso, very similar to an Italmill flat burr (64mm or 83mm) and the Niche Duo Mazzer 151b burrs. That said, I prefer the DF uncoated 64mm burr that comes stock with the DF64 Gen 2 because for me, it delivers enough body but offers a different more pronounced taste with different flavor notes. The DF64 Gen 2 burr is one of my favorites, even more than the DF64V DF DLC burr. Same geometry but the coating of the DF DLC has an edge with milk based drinks. Bottom line is that if you are only doing milk based espresso and you want those choc-notes really punching through the milk, then the DF DLC burr that comes stock in the DF64V is my pick. If you prefer the features of the DF64 Gen 2 over the DF64V then order the Gen 2 with the DF DLC burrs.
Great review Tom, thanks. I love my DF64 gen 2 however I do find that you get quite a bit of build up in the chute, around the ioniser, and it’s a bit of a pain to clean. Have you also noticed the same issue? Thanks, Louis
@@tomsgrinderlab Thank you Tom. I nearly pressed the button on a DF64 gen2, but think I'll wait a little longer on the 83V review. Be interested to see what you make of it compared to your other DF experience, including the build quality.
Great review, thanks. I just got my DF64 gen 2 with DLC burrs and so far I’m loving it for espresso. I also have the Varia VS3 gen 2. Would you recommend I use the Varia for filter coffee over the DF?
TBH I haven't tried the stock VS3 burrs for filter yet. The Hypernova Ultra S was great but I needed to grind coaser than normal. Try them both and if you do of love to know your thoughts.
DF54. It's perfect for milk only. Just know that the 54 doesn't do "subtle" 😀. It does big and bold. So punches through milk well. The DF64V is great for both milk and espresso but it's a lot more $ so you'd be paying for ability you are not going to use.
I think this could be a filter grinder with something like the ode gen 2 burrs. I would like to have 2 of these for filter and espresso. Mine arrives on Friday!
Could be. There is a good chance they will fit but just be aware that you'll struggle to grind if the the Gen 2 burrs are more than 0.1mm thinner than the DF burrs. There's one way to find out. If you remember, pop back and post your impressions.
