Тёмный

Diagnosing a Bad Head Gasket: How to Spot the Telltale Signs So You're Not Ripped Off. 

Repair Geek
Подписаться 157 тыс.
Просмотров 409 тыс.
50% 1

Diagnosing a Bad Head Gasket: How to Spot the Telltale Signs.
If you suspect your car may have a bad head gasket, it's important to diagnose the blown head gasket before it causes more serious damage to your engine. In this video, I'll show you how to spot the telltale signs of a failing head gasket, including low engine compression, overheating, coolant loss, and more. I will also show you the different things a head gasket seals. In addition to that I will also show you why a bad head gasket has the symptoms that it has. Finally, I'll walk you through the basic diagnostic process, so you can determine if in fact, you do have a blown head gasket or not.
Tools used in this video:
Cooling System Pressure Tester: amzn.to/3zjrWpA
Combustion Gas Leak Test Kit: amzn.to/3JUX186
WiFi Borescope: amzn.to/3lS3QiF
Compression Tester: amzn.to/40pVa27
My Amazon Store: www.amazon.com/shop/repairgeek
Help support the channel, buy using my Amazon links
As an Amazon Associate I earn from qualifying purchases and your cost is exactly the same.
I source all of my service data from the same place that professional shops do. You can as well: www.pntrac.com/t/SENKSUZKRktD...
Questions? Shoot me an email at repairgeek365@gmail.com
00:00 Intro
00:04 Why you need to understand the symptoms of a bad head gasket.
00:42 What this video is going to cover.
1:22 Engine Teardown
1:57 What does a head gasket seal?
4:21 Symptom #1: Coolant and Oil Mixing
7:07 Symptom#2: White Smoke, Bubbling Coolant, Misfires, & Overheating
10:12 Symptom #3: External Leaks
10:51 Pressure testing the cooling system
12:08 Where my head gasket was leaking from.
13:05 Checking for coolant leaks into cylinders
14:36 Compression testing
15:00 Combustion gas leak testing
15:47 What my bad head gasket looked like.
16:34 How long can you drive with a blown head gasket?
19:22 Outro
#headgasket #autorepair #diy
Disclaimer:
The information, demonstration and any content contained in this video is for informational purposes only. The user Repair Geek makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. Repair Geek shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by Repair Geek and therefore, Repair Geek does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge Repair Geek or anyone affiliated with Repair Geek, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.

Авто/Мото

Опубликовано:

 

28 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 377   
@RepairGeek
@RepairGeek Год назад
Tools used in this video: Cooling System Pressure Tester: amzn.to/3zjrWpA Combustion Gas Leak Test Kit: amzn.to/3JUX186 WiFi Borescope: amzn.to/3lS3QiF Compression Tester: amzn.to/40pVa27 My Amazon Store: www.amazon.com/shop/repairgeek Help support the channel, buy using my Amazon links As an Amazon Associate I earn from qualifying purchases and your cost is exactly the same.
@alexshatner3907
@alexshatner3907 8 месяцев назад
I have a 2010 Toyota Yaris 1.5 engine, my question is I have overheating problems, and bubbling when cold through the radiator cap opening, but I do not have milky oil, nor white smoke out the exhaust pipe,so based on just the bubbling on a cold start, what part of the head gasket do I have the problem with that is causing the overheating? my cylinder compression test is #1 190 lbs #2 189 lbs #3 190 lbs # 4 220 lbs as we speak.
@user-ht2jh8zd9q
@user-ht2jh8zd9q 2 месяца назад
What will take to get my truck on the road what can I put to fix my blows head gasket
@user-ht2jh8zd9q
@user-ht2jh8zd9q 2 месяца назад
I need to know what product I can use to take care of the problem so I use
@franktarawa1300
@franktarawa1300 2 месяца назад
Fantastic video. Thank you for sharing your expertise with us. I have just replaced the radiator in my Camry. There was no coolant left in the reservoir and I had to add two liters in the engine. I caught it just in time. Yours is the best video ever. Regards from Sydney Australia.
@erikbritz8095
@erikbritz8095 Месяц назад
*so i am on my third blown head gasket and this is within two months since the last fix and i babied the car(never pushed it or went over 120kph(80mph) with the car so what might be the reason it continuously blows as this is verrry frustrating right now*
@stevenginnever5343
@stevenginnever5343 8 месяцев назад
I'm a little over middle age and can't believe how someone so young, can be so articulate. Your knowledge and delivery on problems are so professional. You really are a breath of fresh air on RU-vid. Cheers Steve.
@dynamicadrenalin
@dynamicadrenalin 6 месяцев назад
Honestly, I almost skipped the video when I saw a young guy and a Honda. Glad I didn't. I'm impressed. I seldom subscribe to anything. This guy gets one.
@SummerEazelivin
@SummerEazelivin 3 месяца назад
It's called having a passion
@SupraSav
@SupraSav 3 месяца назад
@@SummerEazelivin Having passion does not mean one can magically speak well.
@arcademode2910
@arcademode2910 2 месяца назад
Totally concur!
@erikbritz8095
@erikbritz8095 Месяц назад
*so i am on my third blown head gasket and this is within two months since the last fix and i babied the car(never pushed it or went over 120kph(80mph) with the car so what might be the reason it continuously blows as this is verrry frustrating right now*
@JimFatima-nb3fl
@JimFatima-nb3fl 4 месяца назад
Unbelievable how easy it is to understand the diagnosis of whatever the problem may be going on. So glad I came across this.
@stevenhart9004
@stevenhart9004 Год назад
That was the most informative upper cylinder diagnosis Ive ever seen.
@RepairGeek
@RepairGeek Год назад
Thanks! That was the idea. So many people make videos saying coolant is mixing with the oil, so the head gasket is bad. Nobody ever explains why.
@ktp0913
@ktp0913 10 месяцев назад
@@RepairGeekwould you happen to know how deep are the cooling jackets? Also, can a coolant leak from the head gasket cause the engine to get hot?
@RickSanchez-hd4ct
@RickSanchez-hd4ct 10 месяцев назад
I was literally about to say exactly that. I know stuff but the details n this video I've never actually heard anyone say before. I actually learned something 2day 🤔. SUBSCRIBED.
@patrickcornell4058
@patrickcornell4058 10 месяцев назад
Great teaching @repairgeek. Very clear explanation and good video... I'm saving it in my playlist for sharing lol
@user-vo3ry7rj2w
@user-vo3ry7rj2w 4 дня назад
That is ALWAYS what I want to know. WHY? Without knowing WHY something happens is the difference between knowing WHAT the issue is and UNDERSTANDING the issue in depth.@@RepairGeek
@stephencook7337
@stephencook7337 11 месяцев назад
Rule of thumb is, the longer you wait to fix a problem the worse it gets. So you should stop immediately upon discovering a problem with your car. It can mean the difference between replacing the gasket or replacing the vehicle altogether. Excellent video.
@vincemarshall8550
@vincemarshall8550 9 месяцев назад
or trying different things to sort the problem until you eventually and very expensively replace the whole vehicle ....these issues never givingly present themselves
@TM-fx5le
@TM-fx5le 4 месяца назад
@@vincemarshall8550why are you guys replacing a vehicle because the engines bad? Just drop a new motor in lol
@vincemarshall8550
@vincemarshall8550 4 месяца назад
@@TM-fx5le not a nice job in a transit mate but i get your point
@AlmightyEvil1
@AlmightyEvil1 3 месяца назад
This comment is underrated
@e47kz
@e47kz 2 месяца назад
Don’t all these problems practically make the car totaled in terms of cost to repair. Requiring extensive labor. Like what’s the average cost to replace a head gasket with labor. $5k+… especially today’s rates. What’s the cost for a used engine + labor…
@TheJoeman11
@TheJoeman11 9 месяцев назад
Good technician who methodically covers the range of scenarios involved with head gasket issues.
@user-pi8bd8hl1b
@user-pi8bd8hl1b 4 месяца назад
I have watched dozens of videos about blown head gasket related and, by far, this is the best ever I watched. Congratulations.
@stephenparris8680
@stephenparris8680 8 месяцев назад
Sir, I have watched so many videos trying to get a full understanding of how to diagnose a problem with my combustion. This was by far the most thorough and succinct I’ve found. Thank you thank you.
@ThunderbirdRocket
@ThunderbirdRocket 10 месяцев назад
Tremendous tutorial ! The amount of information , and specificity , and video shots , and simple to understand terminology ; has , without any doubt , whatsoever , made the greatest impact on my learning this particular topic . Thanks mate !! 👊🏼
@williamfletcher4084
@williamfletcher4084 11 месяцев назад
I am much less car stupid now . No need to ask questions because you answered them before I had the chance. Great video man for real...much thanks
@virgilgreenfield1136
@virgilgreenfield1136 11 месяцев назад
Excellent teaching! Thank you for being so detailed and covering the essentials in terms a novice could understand. Keep videos like this coming. Thank you!
@dihylan
@dihylan Год назад
Beautiful and coherent articulation of what the head gasket's role is, and moreover, why you are leaving your engine to certain demise if not repaired in a timely manner.
@josburd6429
@josburd6429 9 месяцев назад
I drove a Nissan with a bad head gasket for 2 months and 300 miles , I just kept extra coolant and oil in my truck to top it off, but it got annoying and after 2 months I was able to save some money to put as down payment on a newer , better car, drive safe and God bless ❤
@SineN0mine3
@SineN0mine3 2 месяца назад
2 months of driving with a bad head gasket will damage your engine badly enough that you shouldn't feel okay with selling it, except to a dealer or scrap yard. It's quite simple for a mechanic to change the gasket, if you find yourself in this situation and can't afford the repair you should probably consider selling it there and then. The mechanic, or some car enthusiast can repair the engine and you can use the funds to buy a cheaper car. It's a tough call to make since we're usually reliant on our cars to get to work, but the car's worth a lot more money with a working engine that has a bad gasket than it is once the engine itself is damaged. The gaskets themselves are usually $100 or less, it's the labour to install them which is expensive. Compared to a new engine which may cost thousands, and has an even higher labour cost you're really incentivised to act quickly once you discover a bad gasket.
@abdirahmanhabib398
@abdirahmanhabib398 9 месяцев назад
Man o man if you are not a professor I don't know what you are!!!!! Explanation on point. I'm a rookie lube tech on my way to wrenching, and this was absolutely gold. Thank you.
@vanrolle710
@vanrolle710 6 месяцев назад
Thanks I think this video was on point and it explained all the symptoms' and diagnoses. I live in the Bahamas and is very much appreciative of all the equipment you use to diagnose this problem. I will continue to follow you for more mechanical videos .. Again Thanks
@ct3049
@ct3049 11 месяцев назад
Gone through many related content but this was the best, answered almost every question in mind!❤
@davesmith2150
@davesmith2150 9 месяцев назад
Great explanation mine I did it 3 times and I finally found it it was a cracked head deep in the oil gally so I got a new head and problem solved...the main problem was oil in the coolant like you said the oil has more pressure then the coolant so it was blowing into the coolant. I had no coolant in the oil.
@chriswoods3851
@chriswoods3851 4 месяца назад
absolutely the g.o.a.t explanation about blown head gaskets.
@user-vo3ry7rj2w
@user-vo3ry7rj2w 4 дня назад
Amazingly detailed and logical description of the head gasket issue. Im astounded at how you explained in detail but still made it so the novice could comprehend. You sir are The Maestro. And I HAD to subscribe to your channel!
@briantday
@briantday 24 дня назад
Excellent, thorough description. I really appreciated the distinction made between the higher pressure oil passage ways, but the fact that the coolant system stays under pressure (albeit lower) after the motor is shut off. Great points, and helpful in diagnosing different symptoms. I've done motor swaps and head gasket replacements on several motors and still learned something. Well done.
@MarkMalone-ni5nt
@MarkMalone-ni5nt 3 месяца назад
Easily one of the best explanations on the types and causes of various head gasket failure modes. Excellent approach using the removed head for the explanation.
@mikedickman6369
@mikedickman6369 5 месяцев назад
Man,how did you get so smart at such a young age? How old are you? I just found your channel and you do such a great job of explaining and showing things. I'm subscribing.
@RepairGeek
@RepairGeek 5 месяцев назад
I'm older than most realize. I'm 35.
@oliverqueen6587
@oliverqueen6587 5 месяцев назад
Yeah initially I thought my car had a Leaking radiator but the bubbling radiator (radiator cap removed and engine on idle) combined with misfire in cylinder 1 in the cold morning confirmed what the issue was. Thanks for the details 😊.
@kevinogorman6282
@kevinogorman6282 3 дня назад
Well presented and shown in detail. There are so many types of engines that require different disassembly and reassembly procedures that people need to research prior to taking on a job like this. For those that are learning or choose not to do it themselves it really helps them to understand the methods of testing and the possibilities of head gasket failure. If the symptoms are present I suggest the repair it now is the only solution, avoid extensive damage. For engines with dual timing chains and tensioners, V6 and V8 it is a task that may be above some diy capabilities as well as tools and equipment requirements.
@stuckinmygarage6220
@stuckinmygarage6220 Год назад
I'm not sure how much practice you do, but it's working. Kudos 👍
@ExitVelocity
@ExitVelocity 10 месяцев назад
Very intelligent dude and great at explaining things. Videos are very informative. Thanks
@Acidalley
@Acidalley 10 месяцев назад
Excellent indepth analysis. This video couldnt be better. Thanks for sharing
@garyvalto1854
@garyvalto1854 8 месяцев назад
By far the best video on RU-vid about this topic! congrats!
@anthonyiannone7618
@anthonyiannone7618 Год назад
excellent explanation . The one thing i do is pressurize the cylinder with air and watch the cooling system for bubbles , like you said but without running the engine. Ive used this technique several times on Hondas and it worked for me
@kj8687
@kj8687 2 месяца назад
Of all the videos I've watched on head gasket failure, this video does great job of explaining this problem. Thanks for this great video
@thomasmastersen3709
@thomasmastersen3709 Год назад
Outstanding and informative overview of the whole diagnostic!! Smart guy. Very smart indeed
@justchris846
@justchris846 6 месяцев назад
This was the best “Explanation Video” I’ve watched
@davenkaren2572
@davenkaren2572 10 месяцев назад
THE BEST EVER COMPLETE BREAK DOWN!!! Thank you!
@yamigekido9554
@yamigekido9554 5 месяцев назад
This has been incredibly informative to me my head gasket just blew and this video helped me diagnose what exactly happened
@birdmanohyes
@birdmanohyes 9 месяцев назад
Great video! Thank you for breaking things down, and explaining things.
@plugg440
@plugg440 10 месяцев назад
Very detailed explanation! Probably the best video I’ve found. Subscribed.
@akgocrazzzy4580
@akgocrazzzy4580 3 месяца назад
I’ve been looking at hella head gasket vids this guy explained it best
@Glenn_123
@Glenn_123 Год назад
Great video! This has always been a fear of mine.... I have an 04 Accord. I know this day is coming. Thanks for doing a great video.
@virginiawilliams8947
@virginiawilliams8947 9 месяцев назад
Thank you so much! You are an awesome instructor/teacher!!!! Even I halfway I understood how it all is working together as a wh.❤
@jeffdavis1458
@jeffdavis1458 12 дней назад
This is an excellent video. You tell the "whats", "whys", & "hows". I learned so much. Thank you!
@naturemacro
@naturemacro 26 дней назад
Hands down the best vid ive seen on head gasket issue explanation.Thank u very much for taking the time to make this.
@user-ui7zj2bp3u
@user-ui7zj2bp3u 7 месяцев назад
This guy is very professional and well trained
@702HGA
@702HGA 7 месяцев назад
Amazing f**** video. Best, most detailed informational video I’ve yet to see online on this topic. Covered all the basis and made it easy to understand. Really needed the help figuring out my 636 leaky gasket issue & this def did it for me. Excellent job, much appreciated.
@hittz8331
@hittz8331 2 дня назад
First, I want to thank you MUCH for taking your time to share such detailed content!!!!!As many will agree, we appreciate your work and respect your knowledge. Subscribed and Liked! Thank You.
@clivemullings1754
@clivemullings1754 5 месяцев назад
This was a first class tutorial. Excellent!
@sherylm.franks4536
@sherylm.franks4536 7 месяцев назад
You are an awesome teacher! Thank you for this video.
@marouaneahdadouch7219
@marouaneahdadouch7219 8 месяцев назад
I wish I had more free time in my life to watch all your videos
@marcussweat1924
@marcussweat1924 7 месяцев назад
Very Nice! Your delivery on this topic was top knotch and right On Point! Keep those videos a coming. I am sharing this... Thank you...
@user-bx5zy1mu3v
@user-bx5zy1mu3v 8 месяцев назад
Such a great educational video, deserves more views.
@karlrensburg3472
@karlrensburg3472 3 месяца назад
Awesome tutorial, another one I learned over the years is after the engine reaches operating temperature, one shouldn't have water dripping out the exhaust , that is a sign of coolant leaking at the head.
@okcyurwin
@okcyurwin 11 месяцев назад
Absolutely brilliant tutorial 👌
@raymondhandboy4730
@raymondhandboy4730 Месяц назад
Dude this is the best breakdown and Informative video I’ve ever seen on RU-vid. Amazing job and I learned Alot! Thank you!
@paulstrangers2943
@paulstrangers2943 10 месяцев назад
Very methodically detailed video on this topic. My tacoma has bubbles in the radiator.
@ke6bnl
@ke6bnl 6 месяцев назад
Excellent demonstration
@sagewhite5776
@sagewhite5776 4 месяца назад
Amazing video. Thanks for saving me so much headache and money on diagnosis
@fleuryelite2170
@fleuryelite2170 3 месяца назад
Great job man You know your stuff, finally someone who tells these people why and how,
@Ram14250
@Ram14250 Год назад
Great Video! Thank you for posting this!
@hamlet2554
@hamlet2554 5 месяцев назад
Explained very well. Great detail!
@jeffk4449
@jeffk4449 8 месяцев назад
Great explanation!!! Thanks for making video.
@user-kh5qi1rm7h
@user-kh5qi1rm7h 3 месяца назад
Appreciate your knowledge and clarity. Thank you
@chendrebala
@chendrebala 7 месяцев назад
You are a star. This information helped me a lot.
@adilrizwanmughal6607
@adilrizwanmughal6607 4 месяца назад
A very informative and explained technically and logically. Thanks
@classicklyjus1025
@classicklyjus1025 28 дней назад
Excellent video. Thank you for helping me better understand this issue. 🙏🏼
@SMAutoRepairLLC
@SMAutoRepairLLC 2 месяца назад
Great job on the walkthrough!
@rubenperales9319
@rubenperales9319 11 дней назад
Very clear explanation thank you for this.
@roberxl
@roberxl 5 месяцев назад
Best class on blown head gaskets
@mahdielmahdi1961
@mahdielmahdi1961 6 дней назад
Excellent explanation and 100% great video.. thanks for sharing
@olxrvn
@olxrvn 6 месяцев назад
That's a perfect explanation, thank you very much
@e47kz
@e47kz 2 месяца назад
This seriously the best video on diagnosing!
@wackey3455
@wackey3455 Год назад
well done very Educational. cant wait for your next video
@briandrew2689
@briandrew2689 7 месяцев назад
Bro well explained I appreciate it and so many ways you don't even know thank you for being so thorough and explaining everything to a "T" 💪😎👍
@humphreyakwabi8343
@humphreyakwabi8343 16 дней назад
My God what an excellent video! So competent and informative
@boinknook
@boinknook 6 месяцев назад
Thank you. Great explanation! Wow, all that because a stupid gasket was leaking. Wow that gasket has an extremely important job!! But an easier question: if a head gasket is blown, eventually there should be a check engine code because if you think about it, all these symptoms are going to affect emissions.
@RepairGeek
@RepairGeek 6 месяцев назад
You could have misfire codes for sure. Most vehicles don't monitor the physical emissions, they monitor the systems that control emissions. So if the emissions controls are in place and working the car doesn't care, regardless of how harmful the emissions actually are.
@madb9422
@madb9422 3 месяца назад
​@@RepairGeekThx. It wasn't my question but thanks for the answer.
@nostradamus4828
@nostradamus4828 11 месяцев назад
Great educational explanation
@marcusgipson1012
@marcusgipson1012 10 месяцев назад
Great video breakdown bro
@adrellwilliams4754
@adrellwilliams4754 10 месяцев назад
Great info. Thanks buddy.
@christopherharrimansr9541
@christopherharrimansr9541 4 месяца назад
Very good video in detail !!!
@user-gl8hb6eo5m
@user-gl8hb6eo5m 4 месяца назад
very well explained. Thanks man your a wealth of knowledge for sure.
@dontheplumber9338
@dontheplumber9338 7 месяцев назад
I just subscribed, Thanks for sharing this information. I have bad head gasket on my s10 . You helped to confirm that.👍
@olusesanfesobi5219
@olusesanfesobi5219 4 месяца назад
Great video. You got a new subscriber pal 👍🏾👍🏾👍🏾
@Genghis-Jan
@Genghis-Jan 4 месяца назад
Very well articulated
@johncarmichael4698
@johncarmichael4698 6 месяцев назад
Learned so much thank you
@grantreid8583
@grantreid8583 8 месяцев назад
From an engine reconditioners view those alloy blocks with the open style water jackets around the cyls are a poor design and will always have headgasket problems the tops of the blocks go all over the place with constant heating and cooling. When you run the miller over them they have low spots everywhere.
@caiusjacoby9257
@caiusjacoby9257 8 месяцев назад
Excellent explained
@mhiggins3460
@mhiggins3460 4 месяца назад
Excellent content. Thank you.
@kwesigaalex4765
@kwesigaalex4765 3 месяца назад
Perfectly explained, thanks
@namastelounge3863
@namastelounge3863 4 месяца назад
Excellent video !
@emin8158
@emin8158 8 месяцев назад
Great explanation. 👏
@ioandriment3140
@ioandriment3140 3 месяца назад
Hi all. Thank you for the lesson. All the best for All of you.
@2004elliot
@2004elliot 10 месяцев назад
great video taught me a few things. thanks!
@giglehart
@giglehart Год назад
Wow!!! This is awesome!!! Not sure I’m ready to be a mechanic. Yeah but I can now ask some questions!!!
@funkyjunky6574
@funkyjunky6574 3 месяца назад
Excellent information shared thank you brother
@k86305
@k86305 Месяц назад
Great Explanation ,, now i know what is a gasket and what are the issue associated.
@robertoaguilar3764
@robertoaguilar3764 10 месяцев назад
awesome video, thanks for sharing what you know
@tonywilkey4369
@tonywilkey4369 7 месяцев назад
Very well explained and videod, self explained diagnosis.
@ivopavlov9176
@ivopavlov9176 10 месяцев назад
Awesome stuff! Thank you!
@wheelsbytheocean
@wheelsbytheocean Месяц назад
Nice video mate!
@flippingcarsrepairs
@flippingcarsrepairs 10 месяцев назад
Loody brilliant very informative 👍👍👍
@user-xp3ij9oe6h
@user-xp3ij9oe6h 5 месяцев назад
Excellent tutorials
@emmanuelmavunga969
@emmanuelmavunga969 8 дней назад
You are good. U explained so well. Saluted
Далее
Fixing a Blown Head Gasket ~ The Right Way
37:39
Просмотров 2,2 млн
What Actually Happens When You Overheat an Engine
21:45
This Destroyed My Car’s Engine, Here’s Why
12:05
Просмотров 1,5 млн
Fix your Catalytic Converter for $10?
9:13
Просмотров 2,5 млн
Беспредел на дорогах!
0:49
Просмотров 3,5 млн
ABS on Vs ABS off
0:16
Просмотров 6 млн