hi Steve. they are on most newish land rovers Audis and i personally have a BMW one lol to mention 3. all the same apart from printed circuit board in the top where the wires go. some can be bodged to work stand alone ,but might have issues with low voltage. some use the cars ecu which is not so good, some use the cars water pump too, beware of what your buying
@@stevecooney1361 no probs mate. the scrap yard is your friend. if you get stuck gimme a shout i may be able to help. whatever happens make sure you use 22mm pipe for the main circuit. i got undercut on a job today as a heating engineer managed to con the customer into using 15mm pipe instead of mine and webastos recommendation of 22mm. his heat exchanger will crack within 2 winters. cheers Steve and good luck
Yours where cracked and the reason for malfunction. When not running the cyklus they stop functin as well. Do you have any opinion on how to repair? Is it a cleaning process or must i shange the burner or the pump? Any ideas?
Hi, did you replaced the felt type mesh under the screen in the burner? For the life of me I can't find any suppliers in uk only Latvia which takes 2 weeks to arrive. Thanks
Sorry about the back of my head and hands blocking the view a bit a times. Improved camera angle needed🙌🙌🙌🙌 subscribe if you would like to see more 👍👍👍
That heat exchanger was not scrap at all. 12:07 The join you pointed to, If you removed the pan head machine screws from around the outside of where you lifted out the combustion chamber, you can separate the two halves of the combustion chamber, fit a new gasket and two new O rings. The gasket sets are available, have replaced many.
I reckon it probably will. Although I have never tried.I have a Chinese heater in the workshop that runs on slightly diluted engine oil atf and whatever else is laying around lol
Legend!!!! I was literally staring at this burner part thinking hmmm could i cut those welds and screw it back together! 🎉 Always good to see a random idea confirmed before trying it and possibly killing a hurner core! 😄
Brilliant. Very informative and useful. My mechanical skills are nothing to write home about but after watching and listening to you I now understand how how mine works (apart from the electronics😁) and would feel confident taking it apart. Thank you. Subscribed and off to watch more😁
Hi just watched you strip the webasto. I have one that I have stripped before a couple of years ago this year I feel the water temperature is not as hot any idea
Hi Gary. It sounds like it just needs a clean out. The carbon buildup inside the finned heat exchanger insulates,so the heat does not transfer to the water. I hope that helps. Thanks for watching👍
Hi Peter. It sounds to me like it will need a clean out,prob a new burner screen too. They do make a slight roaring sound,but gets loads worse as they soot up. My 2p worth .Cheers for watching buddy