Diesel Powered Roller Compactor, Sitting 30 years, Will it ever Run again???

Подписаться 795 тыс.

Просмотров 611 тыс.

50% 1

I need a Large Compactor to help construct my new building pad, lets fix this one!
Shop Clearing Video here: • Building my DREAM WORK...
Like something you see in a video? good chance its linked in my Amazon Store: www.amazon.com...
Save yourself 5% and help support the channel by Getting some sweet gear from Yankum Ropes here!
yankum.com/?af...
Use the code dieselcreek at checkout for 5% off your purchase!
-If you’d like to help get the Autocar back on the road you can help out here: / dieselcreek
OR send a One Time Contribution Via PayPal to DieselCreek@gmail.com
-Custom Music made for me by Vinnie Longhi of the Semi-Supervillains
Check them out here: / tssvillains
-Wanna send me something? Sent it to:
Diesel Creek
P.O. Box 109
Burgettstown PA 15021-0109

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,8 тыс.

@93holzkopf1412 2 года назад

I am pretty sure that engine is a F3L 812. I have the same engine as a 4 cylinder in my tractor. Here in Germany they are a dime a dozen and every farmer knows how to fix them. Parts are very cheap. You should definedly get the glowplugs working, in cold weather they will not start without them. And also, you can get the cooling shrowd out without taking the injector lines off, its tight but it works. Looking forward to seeing that old thing run. They quit making the 812 series in 1969 so its propably a mid 60s machine.

@zynifi 2 года назад

You’re a good man for explaining so well.

@jaquigreenlees 2 года назад

locally built, large availability = low cost and lots of parts. Deutz parts in North America, rare and expensive.

@MitzvosGolem1 2 года назад

I have older Deutz . Loud but run nice I dont like the newer rubber timing belt models. I had one water cooled Deutz blow up from rubber belt failure. i believe Deutz came from Rudolph Diesel originally. I had a Krupp 120ton AT krane also. A danke.

@MechanicB123 2 года назад

It's not f3l 812 but rather f3l 913 or 912, only difference is in cylinder diameter, but is wary small difference

@93holzkopf1412 2 года назад

@@MechanicB123 912 and 913 are direct injected. This engine has glowplugs, so more likely an 812 which has indirect injection.

@paulward3566 2 года назад

Thanks for a cheerful approach and good quality video. I enjoy your attitude and western Pa. home boy persona.

@dougyurecko6500 2 года назад

So by a show of hands, who knew we would see a little fire when he brought out the torch and the starting fluid????

@samdunn7860 2 года назад

Exactly

@linepainter 2 года назад

It would be a boring video without any fire

@bluegrallis 2 года назад

Kinda like trying to set the bead on a tubeless tire 🤣

@dalestpirerre2756 2 года назад

It's just a method of preheating the intake ? 🤷‍♂🤣🤣

@blackhatch46 2 года назад

All Zipties fans did.

@cmleoj 2 года назад

I thought I had a problem buying too much junk. I bought a South Bend lathe in 2015 and it still isn’t running. Do yourself a favor and stop buying so much junk! It seems like it would help your channel to do a few multi-part series where you take one machine and take us through several processes on one machine. Basically what you’re doing now, but not so much clapped metal. The loader(don’t get me started…), the dump truck, the heavy trailer, the crane, the whacked out church building (OK, I miss the church and I really want to see you work on that some more.)! I feel heavily invested in this channel all of a sudden.🤪

@wheelmanruss4620 2 года назад

"At this juncture I'd like to reiterate that I have no idea what I'm doing" 😂😂😂 One of the many reasons why I love this channel.

@11moonshot 2 года назад

True, could be my words!! ... but be sure... Matt has a "feel" for it!! Like a singer-songwriter who never "studied" what he does so successfully!

@peterharms3851 2 года назад

I watched you dismantle that throttle unit, with a wry smile, I’m a seventy year old, who can say they were only ever smacked by their Dad, once…….he caught me using a screwdriver as a chisel. A cardinal sin, in his mind and a lifelong lesson, never forgotten (and a practice never again perpetrated). Thanks once again for sharing your fun, with us, all over the globe.

@DieselCreek 2 года назад

My screw drivers actually have a through-shank and a striking cap on them. They are actually made to be hammered! Still wouldn’t call them a chisel but perfect for what I was doing. Glad you like the show!

@thomasbaer7910 2 года назад

"I'm going out on a limb here" - had me in stitches. Ok, that might be exaggerated, but I really enjoy your dry humour just as much as your mechanical improvisation skills! Cheers from Switzerland

@daveyjahosaphat1428 2 года назад

First comment I see, is what I was going to write! Paused vid at 16:16 to do it! Cheers Matt and Switzerland's T. Baer!

@KenTenTen 2 года назад

@@daveyjahosaphat1428 And he delivers it with a straight face. Love it.

@cvoyag8er 2 года назад

Stick to ur guns n never back down, it'll come around. Country needs young folk like you to build their dreams n help build back our country. We like your gitterdun attitude. Cheers

@RoelvandenBergWillemWasbak 2 года назад

These Deutz engines are really but REALLY bullet proof. I work here with the same engine on our Deutz D4506 tractor. Our tractor has not recieved new oil, oil filter or diesel filter or any filters for atleast 15 years. It still runs like a clock even without any service on it after all these years. The tractor is made in 1972. I love them. always start. Never let us down. Has no heater for the diesel so you can't preheath. It is direct injected. you have a reliable engine there.

@travismarett7100 2 года назад

I've got to hand it to you. Trying to start a diesel that has been sitting for 30ish years is hard enough. Trying to do it below freezing while it's snowing shows your character and determination. As always I love all your content.

@11moonshot 2 года назад

True and valid, this guy is a hard nut!! A fine role model for my 6-year-old grandson who l o v e s the channel! (without understanding one word of it) I hope it will be one mighty incentive for him to learn English... Mike and Lenny from Dresden, Germany!

@Xlaxsauce 2 года назад

while I agree with that. It is much easier to work outside in winter in the sun with no wind

@DieselCreek 2 года назад

@@Xlaxsauce those days are delightful but hard to come by

@dinghy6916 2 года назад

@@DieselCreek I bet you cant wait for summer Matt, love to see when it gets nice and warm and your diesels start right up.

@assessor1276 2 года назад

Looks cool Matt and your pronunciation of Deutz is perfecto!

@JBloemert 2 года назад

Hi Matt, I did own exactly the same machine, its a "dynapac" hope you get it running, its a very powerfull compacter. Also check the big V-belts going to the vibrator. I always watch your videos, really like it. Looking out for the next one.

@margaretwilkinson9140 2 года назад

we are not dissapointed Mr Matt. We are fortunate that you exist, and that share your life with us!

@legendoffrost8832 2 года назад

This is quite possibly my favorite channel on RU-vid! Not only do I enjoy Matt's personality and sheer intuition. There are so few channels that I consider to be quality and congratulations Matt your one of those few!

@emilkvicktube 2 года назад

I agree

@DieselCreek 2 года назад

Wow thanks so much!!!

@legendoffrost8832 2 года назад

@@DieselCreek keep upthe great work Matt! I look forward to seeing what you have in store for us

@pinguinkitty 2 года назад

This is subscriber Ronnie on my Wife's table. Hey Matt, a little tip. A magnet works wonders finding screws, nuts and other metal parts in snow. Great vid to watch during Superbowl not funny commercials. It's gonna take a while to watch this one.

@SultanOfUmpapabowbow 2 года назад

My favorite approach - Well, yea... Let's just connect the battery and see if anything catches on fire. 😉

@johnwudarcki9315 2 года назад

🔥🔥🔥🔥💥💥😂

@Rorschach1024 2 года назад

Safety third...

@williamlulay7982 2 года назад

Wow! - You got snow! Reminds me of why I don't live in the northeast anymore. "....going out on a limb...." huh??!! Good one! I admire your bravery and sense of adventure in taking on getting a piece of machinery running of which you know nothing about, and which you always end up learning a lot about. I see by a lot of the comments below that you're getting a lot of help from the residents of your engine's native country, and also other owners of this piece of equipment, so good luck with this latest project!

@k13ehr 2 года назад

Your explanations of what you see and are doing sets your channel apart from other crazy peeps, and makes it worth watching.

@kingbenjamin22 2 года назад

Big thumbs up for your persistence and humor Matt!

@kylemccann2500 2 года назад

Legend has it, if Matt collects 2 more rollers.......he will have the Infinity roller and the mad man will flatten the whole Earth! Oh God!

@garysprandel1817 2 года назад

Avengers level event as all the old decrepit heavy equipment across the universe suddenly work again and have spraygun restorations

@johnwudarcki9315 2 года назад

What’s he got now? 4, 5?

@mikepeirson1150 Год назад

I love watching your channel of my past life doing what you are doing, the frustrations, the cussing and all that it is really interesting, also love the music.

@manganvbg90 2 года назад

A tip for when you build your shop, go bigger than you initially want. Its always turn out too small! :D

@timothysmith5769 2 года назад

Big Moe's in San Antonio Texas is THE place to go with troublesome starters. Of late, I always seem to find myself working on projects that need antiquated motors diagnosed, repaired, or rebuilt. I took an early winch motor in to them to be diagnosed and rebuilt. When it was all over with, I had a motor that was rebuilt from tip to tail and they didn't even know what kind of motor it was (and we STILL don't). Their workmanship is second to none. Prices are very reasonable.

@terryrogers1025 2 года назад

You just gave the expression “ shade tree Mechanic “ a new meaning when you went “ out on limb” with this one. Loved the vid, looking forward to that engine running, and I have no doubt it will. Thanks for the ride along Matt.

@jesusisGod1434 2 года назад

That’s why I like this channel so much, the chance for a legit reason to use a sledgehammer is HIGH!

@WatchWesWork 2 года назад

I'm disappointed we missed the fresh manure being spread...

@awstott 2 года назад

I saw the manure too. My thought was "I bet that smells wonderful.....:

@wes11bravo 2 года назад

More where that came from, Other Wes!

@OldF1000 2 года назад

That depends if you are upwind or down wind ; )

@shermgohn 2 года назад

Yeah but you got to watch the "same old manure" that we all love to watch Matt get involved with. I am completely satisfied.

@samcoolidge5988 2 года назад

I thought this was going to be the final episode after seeing him break out the starting fluid with an open flame near by! 🤣🤦‍♂️

@6point5by55 2 года назад

Mat from Diesel Creek and Andrew Camarata. Both doing their bit to keep the American second hand equipment market going in tough times.😁

@thaddeustroyer 2 года назад

@20:39... who didn't see that coming? Matt! And yes, "kettle", we are both black. Love the old equipment recycling videos and am jealous, especially of the "free" aspect of your picks. Keep up your standard work and you will get it running again. You're doing a great job. Love the video.

@wijim1948 Год назад

I love your torsional rotational encouragement device.

@Tom-In-Ga 2 года назад

Okay, so I was laughing hysterically when you laid that propane bottle up there and started spraying starter fluid. All I could think was "What could possibly go wrong?" I had this vision of fire trucks and first responders all standing around after the fire was out and just shaking their heads and you sitting on the ground naked and charred from the explosion like an old Charlie Chaplin silent movie. 🤣

@ariahjade34 2 года назад

I have the same torch and it has a pressure relief on it. I learned that the hard way. Left it on a stack of split wood that caught fire from the heat of my fire pit and the bottle was just burnt and there was no propane left, and no explosion.

@1982jeepcj8 2 года назад

My name is Matt, I am a walking talking safety brief

@alexandermckay8594 2 года назад

I was just waiting. All I could think of was fuel /air bomb! Quell surprise!

@kdogc10 2 года назад

Yeah! I saw that and thought " what the hell is he thinking"

@herbcraven7146 2 года назад

"Come with me, and you'll see A world of OSHA violations..."

@thavvolf9157 2 года назад

May as one who has driven a trailer backwards I’m very impressed with you navigating your driveway backwards

@jonathantaylor5217 2 года назад

A tip we used to do when trying to start 6.0 poerstrokes in the cold. Was take a ruber exhaust hose from a shop. Put it from the tailpipe of a warm truck and stick it in the intake of whatever your trying to start. It works every time. Keep it up Matt

@erik_dk842 2 года назад

That's a good tip. In a diesel, there should be plenty of oxygen left for the engine to fire up.

@ajohnson6371 2 года назад

Matt, you probably know this, when you pour the floor for your shop, don't let them use the old concrete cure, go to a industrial dealer and get a industrial dealer. Put it on as soon as the concrete is cured. You can keep it clear or add a color later. I would suggest a light tan, broom sweeps easy and also it is easy to wash down. From experience, my 2 cents. I finished all the walls with white roof metal 8 ft high. All the electrical outlets were 4 plex. I also put an exhaust fan in the top of the roof, big one will take smoke out in 5 minutes. Have fun.

@captainjerk 2 года назад

Found the key right away! Sweet! 😃 Oh dang! No worky! See ya next video!👍

@philrobillard2233 2 года назад

Try removing the drive shaft off the front of the engine to get a little more cranking speed>

@haroldsprenkle4173 2 года назад

I have a soft spot for Deutz engines. Spent 3 1/2 years working on forklifts, majority of our fleet were Baker diesels with Deutz motors. We had 70+ forklifts almost 50 Bakers. Most hours on a motor without an upper overhaul was 32,000, had pump problems, replaced top end on general principal. Most ran about 18,000 hours average on top end. Bottom end no problem, keep an eye on wrist pin bushings after a couple of top ends. Longest I saw one run was nearly 60,000 hours, if I remember right 56,000, was running well, bottom end had never been touched. Your motor is a glow plug motor, use them, they don't like cold. Old 7103300 used to get parked in a colder spot and I have had to get it fired up for the week many times, use the glow plugs, get some smoke, wait for heat to transfer and it would fire up. You have the later lift pump, earlier ones had lever. Setting valves on Deutz motors is kinda easy, set for zero lash at lowest temperature you want to start it at, lash grows as it heats up. One last bit. Deutz motors are easy to start when it is cold. A space heater blowing over the cooling fins warms it right up.

@FransvandenBergeMuziekschuur 2 года назад

I am giving this a like without even seen it. These industrial tools need to be preserved and we need to educate everyone about them. They define human kind. Matt is a great teacher.

@lordjaashin 2 года назад

nah we need to spend our educational resources and time on CRT, mmkay

@brucegarrett7232 2 года назад

Probably not the first time you have gone "Out on a limb" love it. Disappointment is always better when a project comes together in the end. You gonna need a bigger hammer for that ram.

@garymucher4082 2 года назад

The moment you had the blow torch running and sprayed the starting fluid, I was thinking, looks like a perfect ingredients for a huge boom. And you didn't disappoint me either. I was wondering if you still have your eyebrows... But it looks like you survived okay. Waiting on the second part now.

@DieselCreek 2 года назад

Yah I figured that would happen 🤣

@suburban404 2 года назад

Propane torch, ether, What could possibly go wrong?

@robertcoykendall9545 2 года назад

Bonus points for a torch in one hand, and a can of ether in the other!!

@donteeple6124 2 года назад

Never ever give up....if they can make it, you can fix it, may take a while...but you'll getrdone....keep the faith, WE have, thats why we keep watching !

@wildcatwilly 2 года назад

My movo shotgun mic really improved my audio on my channel. Thanks for all the hard work Matt.

@akfarmboy49 2 года назад

Expensive piston in those engines But some of the highest quality made. Good engines

@uncleallis6465 2 года назад

Those are fine engines!

@timcresswell3232 2 года назад

You sure got some awesome stuff. I enjoy watching you bring the old equipment back to life and put them to work. Keep on doing what you do . Looking forward to you getting your shop done .

@bllence7353 2 года назад

Matt, I have a Deutz 2011 diesel engine in my skid steer. Mine is an oil cooled three cylinder. Most of these motors have either a glow plug or a glow element (element is a single plug that goes in the intake manifold or air box before maniford) Be sure not to use ether if glow plugs are operating as you can blow things up. I have seen guys using a propane torch directly into the intake (like the glow element) and will make things fire right up. I also agree that if you are not seeing fuel or smoke while cranking, that is the problem. Matt, most important is to check the timing belt, yes, belt. Pretty easy to replace and not too expensive. It is an interference engine so it will bend push rods or more. Keep up the great work and videos, you rock!

@exaltedsawgunner 2 года назад

I really like these videos where you troubleshoot and fix old, neglected equipment. Great job Matt!

@firedog4689 2 года назад

Oh man, Thank you for that! @20:43 Matt became a member of the Mortske club! I was watching, thinking, this boys about to learn somethin!

@mjmcomputers 2 года назад

Right call on the starter, I don’t think she was spinning fast enough to start.

@alan6832 2 года назад

On starter theory, the usual problem is that they are full of coils of wire that are insulated by very thin shellac, which burns off easily whenever they are run too long and overheat. Then with in insulation burnt off the coils, the electricity shorts right through instead of going around in circles like it is supposed to.

@samssungs4495 2 года назад

The Quartermaster * Matt, You are one persistent sob! This compactor has met it's match! It is so bloody obvious you have an incredible amount of knowledge and more tha equal to the task. Can't wait to see video 2 and that old girl come back to life!!

@mdouglaswray 2 года назад

The way it was cranking, I suspected it was a starter issue. On the edge of my seat to see it go!!

@andrewallen9993 2 года назад

I have a Mercedes w124 240d that is doing that, it sounded a bit slow as it only had three of the four brushes wired up.

@MrGomjabber 2 года назад

Great hearing the shout outs to other channels because that's how I ended up here enjoying your content.

@richardtomasetti8401 2 года назад

Matt. . . we are never disappointed in a piece of your equipment not turing over by the end of the first video. We watch because we learn what you learn while trying to start it. We also know that there will be more with getting all the Nik Naks fixed up on this thing to make it working. So regardless if it is an old church, a golf cart, $200 truck, or a grader; we are here to see your experiance through it all. I am here for the bad jokes and songs.

@ecolandmanagementllc1543 2 года назад

Gives new meaning to phrase 'cold start'

@firemedicseven 2 года назад

We have4 Duetz diesels on our farm. My grandfather bought two tractors in like 1981 or so that we still have and they still running strong on the original engines. And we have two 6 cylinder industrial units on deep water wells. Great motors

@jongerber3476 2 года назад

Sorry but the either flames around the torch was very entertaining. Thank you for the chuckle. Keep up repairing the slightly used machinery.

@Leefywood 2 года назад

Curious why you didn’t disconnect the drive shaft as I’m sure it caused draw on the system while trying to start. I disconnect my pump during cold start. Makes a big difference.

@bobwilkinson9894 2 года назад

Fire in the hole!

@charliepearce8767 2 года назад

I pulled one of these on my school holidays and weekends for a road builder 1975,6 when i was a 15 year kid. Was good work and I earned enough money with a few other jobs to always have money in my pocket and buy whatever I wanted. Kids can't do that today....insurance companies made sure of that.

@agkleppel6235 2 года назад

An old DEUTZ diesel WILL run again.. greetings from gemany

@joanlittle3899 2 года назад

all I am doing is holding my breath keep going I am so happy to see all this I am 90 so I worked a lot of these beautys...Joan

@jamesanderson2176 2 года назад

Don't you know that "Will It Run" videos ALWAYS end with it running (or failing spectacularly)? I guess it did catch fire, once.

@michaelguinn5736 2 года назад

Evening Matt!! I have no doughbt you will get that thing running!! Be safe!! God Bless!!!

@garthbutton699 2 года назад

Sometimes its difficult to start an engine when its cold when it has no issues,but this is another kettle of soup, no glow plugs,crappy starter,cables,drag from the drive etc.you get it,I'll wait for part 2,great content and don't worry about audio issues this isn't Cinema scope ya know🤗😎🤗😎

@elijahosman1525 2 года назад

I like that you give sneak peeks at the end of you videos gives me something to look forward to

@PacificNorthwestHillbilly 2 года назад

Working on vehicles in the snow is the worst, but someone has to do it. Just glad it's not me 😂

@Biggs58 2 года назад

Thumbs up for show the work to this point. I can’t wail to see part two.

@pvvwt4377 2 года назад

Matt , here in Europe we have plenty of these old Deutz engines around , and i know one thing : they can be pretty difficult coldstarters in freezing temperature and if they done a lot of hours . Does your engine have a glow plug in the inletmanifold like in mine ? If so , put some 12V on the glowplug for about 20-30 seconds before cranking . My 3cyl Deutz starts pretty well but it has done only 8000hrs .

@beettheyeetskreet9216 2 года назад

i think his "glow plugs" are nicknamed a propane torch lol

@humbucker0076 2 года назад

Yeas, those Deutz engines are really hard to start due to the fact that they are usually not direct injection, but have a precombustion chamber setup. That needs some time to get warm, especially with old school glow plugs. And even if your Deutz engine is worn down to bits, that's not too big off an issue. One of the greatest things about them is their repeatability. It doesn't matter if you have a single cylinder, two or six. The engines only differ in the injection pump, crankcase and shaft. Every piston, head and cylinderhousing/sleve is the same. That makes for great parts availability. Like a piston with rings and cylindersleeve only costs around 200€ for some engine families. And with them not being in one single block you can just chance them easily too. They're just fixed with the headbolts into the block. Experienced personal can switch the complete upper engine in about half an hour. It's all so simple. I.e. for adjusting the compression/clearance between the head and cylinder, you just put washers between the block and sleeve. Deutz recommended method of measuring the clearance is just to put a piece of soldering wire onto the piston and to turn the engine over. The wire gets smashed and you can measure your current clearance. Edit: As for your "shut-off" lever. Often those Bosch pumps have their run position pushed int and it a pull out all the way to stop. Inbetween, before you start to feel the spring action there is usually a third position to give you more diesel during start up.

@horstszibulski19 2 года назад

There are actually glow plugs, right behind the injectors, the wire could be seen not connected, would just take another jumper wire from the positve post on the battery for around 30sec before cranking and the chances of starting up would multiply... :-D

@beettheyeetskreet9216 2 года назад

@@horstszibulski19 I know lol but he was using the torch as an intake heater

@erik_dk842 2 года назад

USA youtubers stubbornly refuse to use the glow plugs. 30 seconds or more is needed.

@frankietaylor4803 2 года назад

A starter for Valentine’s Day. , how lovely 😃

@darylnicklen3685 2 года назад

We all Know generally if it's big and free there's usually something on it that will eventually cost quite a few dollars. Thanks Matt I'll be back to see what else this compactor throw at you. Dazza From Australia. Persistence Usually pays off.

@JanPaulini 2 года назад

Its a shame the old Deutz is so rare in the U.S., they are some of THE most used Diesels in the world and fool prof and reliable. Love your videos...... !

@davidjones8680 2 года назад

Its always educational watching you work things out Matt, no matter how long it takes. Just keep at'her and get it done. David in the U.K.

@RSterkenburg 2 года назад

Yeah, you can learn not to spray ether (which is OBVIOUSLY very flammable, that's the whole point) onto a lit blowtorch

@bgtpeifer444 2 года назад

Matt, you aint gotta explain anything at the end man. Were here for the enjoyment of your videos running or not, to many irons in the fire or not! Keep em coming man!

@10lauset 2 года назад

The first question I asked myself was:'Will it start?' Well, I'm staying tuned for part two. ... Cheers...

@MrVanmancan 2 года назад

🤣open flame gas torch and a can of starter fluid . Who didn’t see that coming 🤣 and when the little key pinged off , who hasn’t had that happen ! Great vid as always , keep them coming 👍👍👍

@jpc372009 2 года назад

I’d remove that drive shaft in front until the engine is running good then reinstall it . There may be enough of a drag on it to slow the engine turning over , considering it has been sitting a long time.

@DieselCreek 2 года назад

Genuinely never even considered that 🤦🏼‍♂️

@benmac940 2 года назад

Agreed, was always told when having difficulty starting anything remove as much load as possible

@DieselCreek 2 года назад

@@benmac940 Its common sense that just hadn't even entered my mind.

@benmac940 2 года назад

@@DieselCreek we all overlook even the simplest of things occasionally. You do remarkably well with these old machines.

@kiinanilmio 2 года назад

Not necessary. There is centrifugal clutch in drive pulley.

@johnkeets8333 2 года назад

We all know that you will get it done since you need it the problem was getting parts for it and the time to receive them. Keep going.

@artstudio9673 2 года назад

A+ for persistence, my feet were getting cold and numb just watching you work outside in the snow! I think it is good that sometimes we have to wait just like you to see it start and some times you have to come back in a few days or wait for parts, makes it all real. Luv this channel and what you do!

@davidstavar5887 2 года назад

I recently found your channel and am enjoying the heck out of it. I grew up just outside of Butler. I left in 1972 to join the Marine Corps and now live in West Central Florida. (NO SNOW)

@GARY-ks3qc 2 года назад

What fond memories of my past working life , using such a bit of gear, while employed by the State Roads authority. And pulling it behind a open cab 'farm' tractor. And behind graders, a sure way to teach patience...Thanks Matt !!! [ Western Australia ]

@ritchied4187 2 года назад

Was hoping to see it run, you just locked me into watching another video. I would have watched anyways, good lucking on the shipping of the part.

@jeffreyneihart1614 2 года назад

I am amazed that you didn't put a new fuel filter on it before trying so hard to start it, especially after seeing what the inside of the pump looked like. Thank for sharing!!!

@normhowes2975 2 года назад

Looked like the filter was by-passed when the temp tank was installed to me. But l could be wrong.

@Mmercier942 2 года назад

The fuel filter suppose to screw on top of the oil filter housing. The lines had been cut off. But since he use an external tank He know that the fuel in his tank is clean so to start it I don't think he need a fuel filter.

@DieselCreek 2 года назад

I checked the flow. It has tons of fuel getting to the pump

@marksd5650 2 года назад

🔥 Funny how Peg from Zip Ties Bias Plies works his way into other peoples’ videos 🔥

@metalartcustomsLLC 2 года назад

We’ve been fighting trying to get my roller going after sitting many years as well. Think we’re close now. Rebuilding the carb as we speak. My videos will be up on it in around a week

@lordcaptainvonthrust3rd 2 года назад

Matt, for the "out on a limb" line you should be locked in a punitentiary And that everyone should give this a thumbs-up cos we don't always hear that frustration in your voice I prefer swearing and throwing things at reluctant machinery It's briefly satisfying

@markbout257 2 года назад

Hi Matt, love your videos, does look like the spinning speed was too low for the engine to pop off on. But this type of deutz engine (F3L812) is an indirect injection engine so you really need the glow plugs working. But beware with them the are most of the time just 2 volt type. So there should be a big resistor somewhere that's in series to regulate the voltage.

@user-tv5dt3nm9y 2 года назад

Hey, there Matt. If you get a break on that Aero Kroil, I would be spraying that all over every fastener a day before I started work on anything. That stuff is great.

@freddyrosenberg9288 2 года назад

So this is how somebody finds tons of old equipment abandoned in a field somewhere years and years from now...

@stevesidden9584 2 года назад

Blowtorch versus ether can not a good idea love you show always enjoy watching you get these things running stay safe my friend God bless👍👍

@leifhendrickson6576 2 года назад

Open flame and just a little starting fluid… Matt bad idea bad idea ….oh what the hell just go for it. Lol

@stephensafraniii3396 2 года назад

Eighty per cent of the fun comes from seeing what falls out from under such covers.

@rjkischook8874 2 года назад

Matt, I really enjoy you videos and they have inspired me to get back in the shop after a lengthy illness and get my own projects done. Keep the old iron running and keep safe.Rod from Manitoba, Canada.

@DieselCreek 2 года назад

Good for you Rod!

@monkeyhands5053 2 года назад

I gave you a thumbs up for spraying ether into the intake that you'd just heated with a blow torch...and left it in the video, most would have cut it out to look all professional. Love the videos, keep em coming

@inekelassooij840 2 года назад

Jij bent een door zetter en dan komt het goed 💪👍 Groetjes uit Holland 👋🏼

@kerryevans7413 2 года назад

We have faith in you Matt. that you will get it running and serviced so you can use it on the building pad Site.

@happydaysveg1965 2 года назад

Matt ! I have no doubt what so ever that you will get that beauty running! Just makes part two all the sweeter.Cant wait to see it run and have you dragging it around!Keep up the good work and catch you later mate.Shaun.North Wales.UK.

@markchatman9583 2 года назад

I’d chase that driveshaft. You’re probably turning that shaker weight too. Might want to disconnect it.

@pauldiesel4582 2 года назад

Great video Matt! Nothing like wrenching on equipment in the great outdoors. The whole time you were turning it over, I kept telling myself it’s just turning too slow. I was surprised not to see a little smoke from the ether though. Looking forward to part II.

@robertburns3014 2 года назад

You'll get it fired up and running, I'm sure of that, Matt! With something as old and "stagnant" as that old roller, it's inevitable that you're going to have to throw some money at it to get it going again. I know you know that. I will be clapping my hands in delight with you when it turns over!

@oldmuppet191 2 года назад

Stripping down a Bosch governor like that - takes shade tree rebuilds to whole different level 🤣 Just don't stand near the crankcase until you're certain top governor is going to work, you don't want to win a connecting rod.