Different Ways for Measuring Current With Arduino

Подписаться 576 тыс.

Просмотров 72 тыс.

50% 1

High quality PCB prototypes: www.pcbway.com
🔥Let's try some different modules and options for measuring current using Arduino. Schematics and codes below.
🔀LINKS
-------------------------------------
Shunt resistor example: electronoobs.com/images/Ardui...
ADS1115 example: electronoobs.com/images/Ardui...
INA219 example: electronoobs.com/images/Ardui...
INA3221 Example: electronoobs.com/images/Ardui...
ACS712: electronoobs.com/eng_arduino_...
ACS758 Example: electronoobs.com/images/Ardui...
Induction Example: electronoobs.com/eng_circuito...
My tools: electronoobs.com/eng_afiliate...
False/True T-Shirt: teespring.com/it-s-funny-beca...
🤝SUPPORT
-------------------------------------
Join my Arduino Course (Spanish): bit.ly/2JY8icE
ELECTRONOOBS.io: electronoobs.io
Donate on PayPal: www.paypal.com/donate?hosted_...
Help my projects on Patreon : / electronoobs
my Q&A page: electronoobs.io/forum/index.php
Facebook page: / electronoobs
Canal en Español: / electronoobs en español
00:00 Intro
01:25 Shunt Measurement
03:28 ADS1115 Read
05:23 INA219 Module
07:02 INA3221 Module
08:00 ACS712 Module
10:28 ACS758 200A Module
11:38 Non Invasive Measurement
10:49 Thank You
Like share and subscribe to motivate me. Thank you
#electronics
#learning
#arduino

Наука

Опубликовано:

9 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 76

@thorntontarr2894 Год назад

The format of this tutorial with the movable cards was clever and clear. Well done.

@JonathanDeWitt1988 Год назад

Another great video Andrei. Very informative. I'm sure this will be useful in future projects. Thank you for taking the time to create and share it.

@lucianbetke Год назад

Very good foundations that are explained. This time subtitles are included, which is particularly good!

@Ivan.Wright Год назад

Perfect, I've been thinking about getting into these. Thanks!

@bentsprockettech 10 месяцев назад

Awesome video man! Thanks for sharing this one with us. :)

@ed.puckett Год назад

Thank you, so much good information all in one place!

@brad3378 Год назад

I didn't know these existed! Nice❤

@dimitrioskalfakis Год назад

comprehensive range of options and useful presentation.

@davy822 Год назад

The DC motor is an inductive load, so when the motor stops the field collapse and a big negative voltage spike arrives. That could be dangerous for the analog pins in the arduino, if u try to read the voltage directly (first example in your video)

@davy822 9 месяцев назад

most of the time, yes @pohboonpin123

@bLaaSsFTW 18 дней назад

Amazing explanation of them all. Thank you very very much!! :D

@mikevanin1 Год назад

Very useful video! Thanks very much!

@ELECTRONOOBS Год назад

Join my Arduino Course (Spanish): bit.ly/2JY8icE My Tools: bit.ly/3uv8bc3 Help me on Patreon: www.patreon.com/ELECTRONOOBS

@samithetechsavvy6485 14 дней назад

This is just amazing thank you very much

@kingofcastlechaos Год назад

Love the list of things you can measure at 6:03. I guess they mean you can measure welding machines ONCE.

@logcathdi1018 8 месяцев назад

Much appreciation!❤

@Drxxx Год назад

amazing video!

@castlecodersltd Год назад

Very interesting, thank you ☺

@vtbn53 Год назад

Great info, thanks

@peterf983 Год назад

Great job! Next time you should consider using internal voltage reference of Arduino ADC (1,1V for Atmega 328P) in some scenarios. This can increase measurement accuracy about 4 times without any hardware.

@osamarabee3927 Год назад

can you please send me a tutorial of that please

@peterf983 Год назад

@@osamarabee3927 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ettV5zorZfQ.html

@chanukagayantha 8 месяцев назад

Great video, Thanks

@axiagame Год назад

5:05 Usually, the solution is to use an OpAmp to amplify the voltage drop, and thus use the full potential of the ADC you will use. Plus, as the input of the OpAmp is ideally isolated, it won't take any current and will be consequently less invasive.

@jrapplefan2231 Год назад

Good point.

@ranganatennakoon Год назад

its very useful thanks. its great 👍

@borisjevic6338 Год назад

Thank you. This episode was exactly what I needed for a project coming up. Keep up the awesome passion of yours.

@sudheerkumar5966 Год назад

Very good Job for learning Thanks

@Sysshad 3 месяца назад

A motor is not only a resistance load, its also inductive load. And to measure inductive loads is much more tricikier and needs a very high sampling rate. And as earlier comments has shown, its 5V/1024 and not 5V/1023, and using internal reference in the MCU, or even better a LDO external IC (or modules as you show) will give a better result with less noice. Also the layout of GND traces are important, sometimes GND (due to trace length and other power consumers) is not 0.0V, so it can offset the measuring aswell. So it can be tricky to get really good measuring results. Also high bit ADC like 16bits or more sees ALOT of noice on the lower bits, so a good hardware design is very important. And another thing, the millsecond you turn off the power to the motor, it will produce a reversed voltage back along the lines. This needs a diodes or capacitors to protect the MCU or the MCU can be damaged :P

@pakfones 6 дней назад

Hi, thanks for the valuable information provided in this video. What you suggest if we need to measure current usage for a Water Pump? It has 1HP to 1.5 HP motors taking 5 to 7 ampares. 1- ACS712ELCTR-20A-T 2- ACS712ELCTR-05B-T 3- (CT) Current transformer

@nashaut7635 Год назад

Great tutorial as always. Just note that your ADC conversion formula is incorrect. It should be V = Vref x ADC / 2^N and *not* V = Vref x ADC / (2^N - 1). So it's 1024 for 10 bit ADC instead of 1023. Check the ATmega328 datasheet (see "Conversion results") for more details.

@saifi1223 Год назад

All in one for beginners ❤

@inventorkr1 Год назад

I like ✅

@SuburbanDon Год назад

Very interesting.

@kosmos8460 Год назад

Супер однозначно 👍

@AhmadHossamMahmoud Год назад

great !

@TobyRobb Год назад

Great summary. I have used a resistor divider to increase the voltage range i can measure. I'm not sure but can't you reference the ADC to a higher voltage by using the analogue ground pin as well? I have always used the hall effect device for DC current and a CT for AC current.

@vetriligamvetrilingamnadar7171 7 месяцев назад

Thankyou 🙏🙏

@Dungnguyen-yd5or 11 месяцев назад

I have INA219 to measure current of a device (say it something like a Chemical Capacitor that I made it myself) powered by a 12V 125A PSU. I know it is a too big amount of ampere for this sensor. Therefore I test my device with another psu that is 6v 200 A, which has a built in amp sensor and I see the current not reaching over 2A so I have some confidence to use the INA219 for my system, and the sensor burnt after 2 sec. Did I do sth wrong or I choose a wrong sensor for my usage? I tried the ACS712 5A but the change is not significant enough to put it in good use.

@chrob5758 Месяц назад

Wich module can I use to measure current with a node mcu and a solar panel 12v 10a ? Thanks

@ShilpaGireesh 4 месяца назад

Hi, Could you recommend the above sensor for measuring a current less than 0.9mA from a board? My project is based on Arduino.

@sijo2084 Год назад

for 230V ac 50Hz . Any CT & PT based energy meter chip is available in low cost?

@N.g.Chanal 11 месяцев назад

what INA19 can messure revers polarity currant?

@Sekir80 Год назад

One thing I would add: the INA219 "only" has a 12 bit ADC. If you want more precision use the INA226, it has 16 bit ADC. You can't set different gains on the 226, though. Your choice!

@aliemlek Год назад

👌👌👍👍

@supreetyadav5021 Год назад

I remove the ina219 resistor and used an external resistor instead and read current of a hundred amps no problem, because of the PGA the values are very accurate even at low current

@SKElectronics Год назад

looking for the electronic dc load hope that come soon.

@mahinvikeshn.k2249 Год назад

which one is a better option to measure AC current?

@jdelectron Год назад

Please make a video on potentiometer method of voltage measurment with respect to meter

@ianlee6416 Год назад

Type of ADC will also affect the reading, especially when reading non DC

@Electroloom Год назад

Please made a same video for voltage as well

@ChandrashekarCN Год назад

💖💖💖💖

@N.g.Chanal 11 месяцев назад

what INA219 currant side is isolate ?

@domoledlight 4 месяца назад

Thanks for your very great video tuto .. I have a question about ads1115 how you can connect A0 of ads1115 directily to a 12v dc load with a shunt resistor without a resistor divider ? what i am missing

@ELECTRONOOBS 4 месяца назад

That's easy to explain. We only connect to the ADS1115 the voltage that dorops on the shunt resistor. Almost all the voltage drops on the motor, so the drop on the resistor is very low. Let's say we have 1A of current on a 0.1 ohms resistor. That's only a drop of 0.1V so the ADS11115 could take it. To get to 12V we would need a current of 120A which would butn the entire circuit. And to answer you about the voltage divider, well, yes we do have a divider between the shunt resistor and the resistance of the motor. In the end, the motor has its own resistance of a few ohms per winding.

@domoledlight 4 месяца назад

Gracias hombre for your reply it's more clear last question about this particular example do you share the same ground between 12v circuit and arduino 5 dc ?

@Gorgonzella 8 месяцев назад

please i'm not very good in english so i can't understand the whole video i would like to know which is the best dc current sensor with an esp32 in your video and especially if the SCT013 can measure a dc current or not.

@fritzdaledelossantos8328 Год назад

Hello why is my adafruit_ads1015 library has no such file or directory even I have already installed the library for adafruit_ads1015. please help huhu

@rezahalzd9298 Год назад

I need an ADC with a high sample rate (5000sps) and 16-bit resolution does anybody know a good adc?

@sammin5764 Год назад

🌟🌟🌟🌟🌟

@petermuller608 9 месяцев назад

The external ADC measurements are off by nearly 5% (320 mA vs 305 mA) how come you call it pretty decent?

@sammin5764 Год назад

🌷🌟🌷

@infofoolygun Год назад

😃

@gforcefabi Год назад

what to use if you need to check 3 Phase 400V power?

@d614gakadoug9 8 месяцев назад

Use commercial current transformers and fully galvanically isolated voltage sensing. Don't even consider trying it unless you know what you are doing!

@bettyw2309 Год назад

The picture of ACS712 should not have the red wire of 12V connected to it, as it is incorrect.

@nima_gamer_8765 16 дней назад

❤ int shuntIN = A5; void setup() { pinMode(shuntIN, INPUT); Serial.begin(9600); } void loop() { int val = 0; for(int i = 0; i < 100; i++) { val += analogRead(shuntIN); delay(10); } int A_read = val / 100; float voltage = A_read * (5.0/1023.0); float current = (voltage/0.5) * 1000; Serial.print("Current: "); Serial.print(current); Serial.println(" mA"); delay(200); } ❤

@d614gakadoug9 8 месяцев назад

*_Beware of the modules with the ACS series hall effect current sensors._* The sensors themselves have been carefully designed so that they are safe to use for AC mains current measurements. Many of the circuit boards sold on the hobby market have been designed by idiots who knew nothing about how to do it properly and in consequence the boards are unsafe, some of them grossly so. On every single such board I've seen the creepage distance has be seriously compromised by bad PCB design, often by somebody using "copper pour" without a clue. The low-current board shown in the video is better than some but still badly done with copper that serves no useful purpose compromising the creepage distance. I couldn't tell how well the 200A module was done. I found a photo of a different 200 board using the same sensor and on it the creepage looked OK but there was grossly unsafe clearance distance between the capacitor and the heavy copper of the sensor. These things are being designed by clueless hacks and they can put lives at risk! === The yellow core shown in the video is powdered iron, not ferrite. The permeability is probably 75 whereas that of typical ferrites used for current sense transformers is 5000 or more.

@polapain37 Год назад

Make a new version mppt Video

@dozog 9 месяцев назад

Electric engineers never seem to understand measurements. Showing the current (first example) as 293.26 mA. The resolution is roughly 10mA.

@d614gakadoug9 8 месяцев назад

Engineers usually understand this stuff. Hobbyists, not so much.

@dand8282 11 месяцев назад

6:41 - how is the load voltage HIGHER than the bus voltage? The bus should lose voltage over the shunt, otherwise the laws of physics are being broken...

@weerobot Год назад

200Amps...Run away 😂

@gmailnelus008 Год назад

A current diverter could be made with this sensoracs770lcb-050b or this acs758ecb-200b , for example for the surplus of solar energy not to inject into the network but to be redirected to a hot water boiler through the solid relay, of course if I could show the arduino code. thank . ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HwMLaKYgFBU.html

@djokinac Год назад

greeting I have a question about the ina3221 can something be done and allow me to connect to an external shunt where my voltage is sometimes 35 volts I need to put a shunt of 50 amps, but as I said, sometimes the voltage is up to 35v Can something be done? some modification greetings from Serbia

@sudheerkumar5966 Год назад

Very good Job for learning Thanks