Another nice clock from you 👍🏻 By now you must have a whole wall of them 💪🏼 Nice with the mechanical “homing”, you get a bonus point for that! Have you tried with some silicone oil to reduce the sound when it moves?
My house is filled with your watches. You have excellent watches and this is the watch I asked you for months ago. You're amazing. But it's too big for my printer.
That clock is also my design, please take a look at ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9IxPvbhAjXQ.html there the link to the 3D data and code are in the description.
Yes, you can use other ESP32 boards. The rear cover is designed for M5Stamp-C3, but the others are universal. Many unused screw holes are prepared on the rear of the frame so you can attach ESP32 using these holes and screws.
@@shiura Thank u Shiura for your beautifull clock, i can't hold my self to making one of this.... I will use esp32 board from lolin and because the hour ring and frame is too big for my delta 3d printer, i will divide by quarter (hour ring) and half (frame) and glue it, hope this method work 😇
Any IO ports you can use. The list of the ports are written in the source code, so you can change the value according to the actual connections you did.
@@shiura Not meaning to interfere with your plans, but why can’t you make the clock bigger? I’m just curious as a clockmaker myself. Thank you for your patience with me.
@@YamamotoTV2021 My printer can print the parts upto 30cm x 30cm and the current model almost reaches to the limit. Already most makers request to shrink or divide it because popular 3D printers are 20x20 or 18x18cm.
