Unfortunately the calibration procedure as shown in this video is WRONG! This is why so many people in the comments have problems with correct readings. Yes, you hold the calibration button down for 5 seconds as indicated in the video. Then the calibration pH will show (e.g. 6.86) BUT YOU WILL NEED TO LEAVE THE PH METER IN THE SOLUTION UNTIL CALIBRATION IS COMPLETE!!!!!!!! The calibration for the pH point is completed once the display stops flashing and goes to solid. This may take several seconds! NOW IT IS CALIBRATED. Taking the pH meter out right away and looking at the display as shown in the video will NOT, I repeat, will NOT calibrate the instrument. You must leave the instrument in with the displayed pH until the flashing stops. You can simply retest by now inserting the instrument into the solution without the CAL button being pressed. It should show the pH of the solution as indicated. If you calibrate with only the 6.86 solution your readings will be accurate to 0.1pH. For accuracy to 0.01pH you will need to calibrate using ALL 3 solutions. This is called a 3 point calibration.
Hello so it's not necessary to calibrate with the 3 powders? Does it also work with calibrate with just 1 powder? The only difference is accuracy 0.1 or 0.01? I think 0.1 is also fine then...
0:50 I can’t imagine where you got this idea but that’s not a glass vial full of water in the tip and the cap doesn’t keep anything from drying out. The piece of glass in there is just an insulator for the small sensor inside it and the cap is to keep it clean and protect from scratches.
Hey don’t know if you’ still do videos but this helped me today ...this is my second time buying the buffer solution to calibrate it because I messed it up the first time lol
Thank you for sharing, I tried calibrating but failed dismally as I didn't know about the fast press. This really helped me alot. Thank you for sharing.
omg lifesaver! i'm just here trying to figure out the instructions for my new pH meter and saw your video. The stars must have aligned 🤣because you have the exact same one as me with the 3 buffer powders. thankyou so much! it was doing my head in lol
Well done! Always help to have a visual! Just received mine to test spa water. Also, mine was German made (live in Germany) and the written instructions have me using the ph 4.0, then 6.86, then 9.18. However the diagram part of the instructions have the 6.86 first like you, so that’s what I’m going with! Thx again!
Thank God! Somebody I understand. Thank you. I did see Uwe Kackstaetter's post about not removing the meter until the flashing stops. Otherwise it won't calibrate. For cannabis grow can't I just use the one needed packet verses all 3 packets. I still don't understand it all. I'm determined though. :)
Incorrect procedure...you need to leave it in the solution until it stops flashing as per instructions...the flashing is when its calibrating NOT when pressing for 5 sec. as that is just done to enter calibration mode. That's why the reading was all over the place after cuz it was trying to calibrate the air.
@@charlienairn783 you put in the solution for a moment without pressing anything, then press a call and hold for 5 seconds , stop holding the button, look at it first under a water and then take it out. Clean in distilled water and do another test. Got it ? 😊
Hi did you use plastic explosives to dissolve the saches in the distilled water , it looks like sea sand. Im havving problems getting that shit to dissolve.
So after you're done with Calibrating the pH meter, what do you do with those 3 glasses of distilled water mixed with the pH Buffer Powder? So you just toss it out?
NO! Read the back of the packets. They say you can put the buffered PH water in a container and label it for future use. You do not have to keep buying buffering solutions. I just did this today, find 3 empty water bottles or whatever and label them.
After first time calibration, is the meter has any mechanism to save the settings or it will be set all the time if we want to test the after some time.?
just bought those packets to calibrate my ph meter like that one...but .are you mixing those packets w/ 250 ml of water?.. isn't 250 ml water like 8.454 oz of water ?..those cups look smaller
Super super good video very clear and concise with with the calibration directions I do have a question though. So what every single time I have to recalibrate I have to order these three packets of solution?
hey YouGrowGirl, how is the unit so far? thanks for the info interestingly, my KWODE PH Meter Digital PH Tester Pen has slightly different direction instead of seconds, I'm supposed to put it into the cal buffer solution, stir, wait until the unit stabilizes and then press cal for 2 secs and read the pen. hmmmm, guess they changed up the directions, i got mine in 2020
TO EVERYONE SAYING THIS IS WRONG ->. It is NOT wrong, shes just doing it differently. I know because ive tried both ways 1000 different times. When you quick press like she is, you dont have to leave it in the solution like that. "Quick press" takes you directly to the different ph buffers faster without having to hold and wait. How do i know this? I HAVE AN IN-GROUND FRICKIN POOL and a Jacuzzi 6 person Spa....going on 15 years now. I check the ph every 3 days, 365 days/year. Calibrated every 2 weeks. Believe me, if the ph were wrong in my pool it will turn the water either brown or cloudy dark green.
Even while holding for 5 seconds in 6.88 solution it doesn't show that ph, it's not getting calibrated at all. I have a digital ph meter. What should I do?
Hi ..I am running my own business of laundry detergents and I am facing the problem how to test the pH value of the this powder using the pH meter.I want you help me in this regard . I will be waiting for your kind response. Thank u
Sorry I do have 6.86 and 4.01 solution bags, and a screw driver to adjust the calibration screw. The instruction said to put in 6.86 and turn the screw to that number. Then put in 4.01, and did not say how to save the reading. I guess I can use your suggestion to fast click it. Instructions are terrible.
Do yourself a favor and just use the drop kits to test ph if you’re only growing and not doing anything else. The cheap and expensive one’s have to be recalibrated, all the time, cheap one’s on literally weekly base. If you’ve already bought the cheap one check and note the PH of your tap water and the bottled water you usually use. After that 1-1.5ml for every 1 point of PH down or up you want to bring and drop kit to be sure. This is again, if one is only doing a small home grow.
Please Make sure to leave your METER in the calibration solution UNTIL the calibration STOPS. on the instructions Manual it says under part 3 that you have to leave it in the solution Until it stops blinking. other than that I think I now understand how to do this. lol
That was a killer video thank you helped me calibrate my pH meter perfectly what is your recommendation as far as recalibrating I bought a pack of the recalibration solution like a 15 pack. How often do you think I should recalibrate
Hi can anyone let me know, what is PH calibration? Does it means we are testing the PH meter with those solutions and if it's not showing right value, you adjust the pH meter, so it give the right PH value? Correct me if I'm wrong
My directions say stir for five minutes with the ph meter dippe din the solution. Same one u have but u only dip for 5 seconds also after pressing and holding the cal it just blinks for a couple seconds then says err
Is mine broken? No matter how many times I do this it just displays 00.00 or 4 underscore lines. When I turn it on there are some ph numbers but it drops to 00.00 in a second or so and stays there. It never displays a number after holding down cal. Just underscores and zeroes.
Hi thanks for the video, i do everything as you, it appears the correct ph on the screen after 5 sec, but then it shows "Err" Please, Do you know what can i do to fix it? I have the same caliber as you
mine from amazon was totally fucked up...when testing the 6.86 solution was giving the value of 4.01;when testing the 9.18 solution was giving 7.8....these manufacturer should not smoke joints while working...i gave it back to bezos
