Тёмный

Disassembly Samsung ML-1660 1665 Laser Printer 

viandant5
Подписаться 59 тыс.
Просмотров 232 тыс.
50% 1

Опубликовано:

 

29 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 150   
@haskprvt
@haskprvt Год назад
YES! Found this unit few years ag on the street as give-away. worked fine all the years but fell in love with gravity one day, so the USB was broken off the controller board. Now everything is fine again, thanks a lot for the first 50 secs of dismanteling!
@t.w.8822
@t.w.8822 7 месяцев назад
Thank you, great video. I opened the printer and fixed the power supply.
@evanspicolo6493
@evanspicolo6493 6 лет назад
Best disassembly tutorial EVER! Internet needs more videos like this.
@LUNATIC75
@LUNATIC75 7 месяцев назад
The first 50 seconds resembles a physical assault more than anything! 😄However, it did show me how to get inside so I can replace the failed capacitor that stopping the printer from powering on properly. Thanks dude.
@davidestradacampa8247
@davidestradacampa8247 Месяц назад
From México City. Thank´s for this video. I fixed my printer and cashed to my self for the job.
@julnnsanchez9847
@julnnsanchez9847 4 года назад
Thank you brother, I had a sheet stuck and thanks to you I took it out without taking it with a special
@wetering
@wetering Год назад
Thanks, this was helpful
@sathyaj
@sathyaj Год назад
Very Useful to us, Lot of thanks to you🙏
@edmarcooliveira3974
@edmarcooliveira3974 4 года назад
Parabéns, vídeo muito bem explicado. Me ajudou muito. Obrigado
@AbbasAli-cg1cf
@AbbasAli-cg1cf 4 года назад
Thank you. Very helpful howto method!
@martinper12
@martinper12 2 года назад
Thank you very much, this helped.
@cfjr9453
@cfjr9453 7 лет назад
Thank you very much. It was the same process on my ML-1860.
@midominguez
@midominguez 5 лет назад
Excelente video, todo muy bien explicado. Tengo un problema con una ML-1675 y es que al imprimir se atasca el papel pero con la segunda hoja, si solo se quiere imprimir una hoja no hay problema, pero cuando el documento tiene más de una hoja ahí si se atasca la hoja en la segunda hoja y se bloquea la impresora siendo necesario sacar el papel. Les agradezco cualquier sugerencia que me puedan dar para solucionar el problema. Ya cambié el tonner.
@edgarnava856
@edgarnava856 4 года назад
Soluciono su problema. Amigo tengo la misma falla
@Gonz-o8j
@Gonz-o8j 18 дней назад
@@edgarnava856 Tengo la misma falla :/
@jpgress
@jpgress 4 года назад
Thank you, bro. It's help a lot.
@enki4731
@enki4731 6 лет назад
que video tan pero tan bueno y didactico felicidadez amigo saludos desde sinaloa mexico
@franciscofortunato1864
@franciscofortunato1864 2 года назад
Muchas gracias por compartir tu trabjo y conocimientos!!
@littleIordy
@littleIordy 3 года назад
Hello OP, I have a ML 1860 which does print a completely black page. Could you give me a hint what the problem might be? Does cleaning the laser scanner unit like described in this video resolve the problem? Thanks a lot in advance!
@eduardorodriguez1730
@eduardorodriguez1730 4 года назад
Quite useful video! Just one question. When the printer keeps trying to reload as soon as the sheet loaded and many seconds after the sheet is printed ¿Is it a clutch failure? Thanks
@viandant5
@viandant5 4 года назад
Are the settings in the priner folder correct? It could be a motor clutch failure or a defective paper sensor
@tonerbank
@tonerbank 2 года назад
Paper control solenoid clutch repair is required,
@tonerbank
@tonerbank 2 года назад
Thanks for your informative video. Please continue to inform me, I love you. I will subscribe to you,
@ranveerclub871
@ranveerclub871 2 года назад
Best brevo
@csabatoth2320
@csabatoth2320 4 месяца назад
Can sy tell me where I can buy the toner chip reader unit? One of its springs has broken, and it can't recognizer the toner.
@viandant5
@viandant5 4 месяца назад
Here there are spare parts for printers ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pB4XIBT_tJw.html
@belhadihamza1169
@belhadihamza1169 5 лет назад
Wonderful Explaining Thanks So much U so Kind
@ThePino154
@ThePino154 2 года назад
legit result following this direction
@nalinda123
@nalinda123 4 года назад
it's grate bro..... thanks a lot..
@iransetubalsetubal
@iransetubalsetubal 4 года назад
Very good!!
@Ijorgexan
@Ijorgexan 6 лет назад
Good explanation. Thanks
@johnnkalil
@johnnkalil Год назад
👏🏻👏🏻👏🏻
@ginevrav2707
@ginevrav2707 3 года назад
Hi, is it possible to get to the corona wire? I think it may be dirty as the prints come out all black
@viandant5
@viandant5 3 года назад
There is no corona wire in this printer
@carlosalbertoalvarezmora
@carlosalbertoalvarezmora 5 лет назад
Hello good morning. How to remove the rubber roller which is below the fuser unit. Or how do I clean it? Thanks
@viandant5
@viandant5 5 лет назад
I think you can find in internet instructions on how to dismantle the fuser unit. you can clean the roller with alcool
@Anuradhapura
@Anuradhapura 5 лет назад
Thanks brother 👍
@laboratorioassembler
@laboratorioassembler Год назад
Ciao e complimenti ti per i video :) se posso chiedere ho una ml2165 ( si ole a questa e si ile alla 2026 e altre della Samsung HP) che mi stampa un fondo grigio su tutto il foglio ... ho smontato la stampante a pezzettini e pulito i contatti con le 2 molle che toccano sulla cartuccia toner e controllato tutte le flat... ma nulla e' cambiato ... ho letto da qualche parte che e' colpa del alta tensione usata per attirare la polvere di toner... ma questa non e attirata dalle cariche create dal laser? Scusa il disturbo in anticipo.
@viandant5
@viandant5 Год назад
Non credo proprio sia un problema di alta tensione. Più semplicemente credo che quella cartuccia toner sia da cambiare
@laboratorioassembler
@laboratorioassembler Год назад
@@viandant5 :) si questo l ha fatto gia il cliente.. ma il difetto permane, tra l altro ha detto che la prima che ha usato ha stampato 5 fogli ok e poi dopo completamente neri.. poi ha sostituito il toner e i fogli ora escono con un fondo frigio ( oktre alle scritte ) bah
@viandant5
@viandant5 Год назад
Potrebbe essere il rullo di trasferimento sporco. I fogli neri potrebbero aver sporcato quel rullo
@laboratorioassembler
@laboratorioassembler Год назад
@@viandant5 l ho passato con uno straccio e alchol isopropilico... ma non si e schiarito il grigio :( e' un enigma.
@viandant5
@viandant5 Год назад
@@laboratorioassembler A questo punto se ha cambiato la cartuccia toner potrebbe essere un problema di piastra base
@deltunino
@deltunino 2 года назад
Hola cuando imprimo un documento manda una 2ª hoja y queda atascada que puede ser Gracias Здравствуйте, когда я печатаю документ, он отправляет 2-ю страницу и застревает, что это может быть?
@viandant5
@viandant5 2 года назад
Ceeck the paper size settings, may be are different from the paper in the cassette. It could be a solenoid problem ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TOLzjA0BUTQ.html
@armandsan5969
@armandsan5969 7 лет назад
Buenos tardes, te felicito muy buen vídeo y te comento, tengo una Samsung ml 1610 que al mandar a imprimir, algo gira y rechina mucho, la destape y la aspire y le puse un poco de grasa por donde pude a los engranes, y después de unas cuantas impresiones volvió a rechinar, que crees que sea?, ojala y me puedas apoyar, saludos
@viandant5
@viandant5 7 лет назад
did you try to change the toner cartridge? Or the priblem may be a teeth of the step motor. look at the gear near the gear of the drum
@allandino8487
@allandino8487 5 лет назад
Can you post a disarm of a m2070? i have this problem: my printer prints all black. i did the cleaning, i've searched in the web but i can't solve my problem. Can you suggest some idea? i really need your help my friend.
@viandant5
@viandant5 5 лет назад
Did you change the toner cartridge? or it could be something related to the laser scanner
@allandino8487
@allandino8487 5 лет назад
@@viandant5 Yes i did. If is the laser, do i have to replace it or fix it? I'm not a professional
@viandant5
@viandant5 5 лет назад
@@allandino8487 you should dismantle the machine. may be it's only a connection problem
@monkeyking-self-proclaimed7050
@monkeyking-self-proclaimed7050 3 года назад
I usually don't have a problem taking them apart. Putting it back is the problem.
@viandant5
@viandant5 3 года назад
Reverse order
@ShrawanKumar-ux2qt
@ShrawanKumar-ux2qt 6 лет назад
Please upload video about Samsung printer dismental model. M2071W and. Re assemble...
@victormattos8123
@victormattos8123 7 лет назад
I need help, after taking out my fuser unit and putting back the printer started sending a 3112 A3 error. Where did I go wrong?
@viandant5
@viandant5 7 лет назад
Probably the thermistor is defective or if you are lucky is only dirty
@MainhoonGiyaan
@MainhoonGiyaan 4 года назад
Sir, please provide the online buying link of the fuser assembly unit of Samsung ML1676p
@viandant5
@viandant5 4 года назад
I think it's the same as Samsung ML1660, probably it's easier if you search the fuser for this machine
@MainhoonGiyaan
@MainhoonGiyaan 4 года назад
@@viandant5 unable to find authentic buying sources
@viandant5
@viandant5 4 года назад
@@MainhoonGiyaan on amazon you'll find it, or on ebay
@ahamedsyed50
@ahamedsyed50 6 лет назад
How to reset the toner chip in Samsung multifunction laser printer 4728 FD model, and how can I change the SMP battery cell.
@viandant5
@viandant5 6 лет назад
There is no way to reset the chip, you have to change it. which battery cell?
@nripendrasri
@nripendrasri 8 лет назад
Hi, I have the same printer and it is continuously pulling the paper, can you pls tell, how to resolve this
@viandant5
@viandant5 8 лет назад
No, it's an hardware problem. probably a solenoid paper sensor, but may be also the mother board or the motor clutch
@nripendrasri
@nripendrasri 8 лет назад
Can you pls help me , how to troubleshoot test and remove solenoid paper sensor and motor clutch
@viandant5
@viandant5 8 лет назад
I haven't video on this argoument, you nay find informations with google but I think the best solution is to bring the printer to a repair center
@joseluisdavalosc.5418
@joseluisdavalosc.5418 7 лет назад
where is the sensor or solenoid
@ChessBonte
@ChessBonte 5 лет назад
@@joseluisdavalosc.5418 Looking for this also! Always feeds a second sheet when the first one is almost completely away.
@lagunafishing
@lagunafishing Год назад
My ML-1860 printer just makes a clicking noise when I press the power switch but then does nothing.
@viandant5
@viandant5 Год назад
It's difficult to say without cheking the printer. It could be the main board.
@jiankhan
@jiankhan 5 лет назад
Thx, you saved me a brainstorming.
@Black_super
@Black_super 4 года назад
like por mi papa que vas emocionarse con este video
@udaysingh2653
@udaysingh2653 8 лет назад
i hve samsung scx 4650 nf laserjet printer, problem is that i was change the moter gear after some time, he was print light, what was the resion , the cartriged is ok print another printer, i was clen the lance unit , sir plz solw is problem.
@viandant5
@viandant5 8 лет назад
what is the moter gear?
@wijesuriya8491
@wijesuriya8491 11 месяцев назад
Hii
@NamDung25
@NamDung25 4 года назад
How to troubleshoot the light indicators and power not stay on when I need turn on it Thanks
@viandant5
@viandant5 4 года назад
You mean the printer does not turn on?
@veeru1verma
@veeru1verma 6 лет назад
What's the setting of feeder unit double gear connected with pickup roller
@viandant5
@viandant5 6 лет назад
Sorry I have no manual or design
@adityamourya
@adityamourya 8 лет назад
hello sir i like ur video i want dissemble scx 3401 printer. please up load a video how i can disassembl
@AnilKumar-ii8yd
@AnilKumar-ii8yd 6 лет назад
Samsung ml 2161 printer is not powering on. Kindly make a video on repairing of ps card of Samsung printer
@viandant5
@viandant5 6 лет назад
try these methods: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EbYjGdJhdbQ.html
@xhavidmamuti8221
@xhavidmamuti8221 4 года назад
How to fix paper jam ?1 When I turn on my printer, the first light is red and lighting nonstop and the second light is yellow !
@viandant5
@viandant5 4 года назад
In this channel you'll find a video on how to fix a paper jam
@muammeryuce7706
@muammeryuce7706 3 года назад
Good
@mariusignat2117
@mariusignat2117 7 лет назад
@viandant5 viandant5 i need your help where does this piece belong, it kind of fell down, now i dont have elctronic
@viandant5
@viandant5 7 лет назад
which piece?
@mariusignat2117
@mariusignat2117 7 лет назад
how can i send u the pic ? i dont know how its called
@mariusignat2117
@mariusignat2117 7 лет назад
imgur.com/a/YMwCZ
@viandant5
@viandant5 7 лет назад
I don't know exactly, I haven't the manuals. it seems the spring on the left side of the cartridge where you insert the cartridge
@rtsmorshed5955
@rtsmorshed5955 6 лет назад
thanks a lot
@niketankosare6264
@niketankosare6264 8 лет назад
I have samsung 1666 Printer, it's printing with shadow. please help me. how can i solve it?
@viandant5
@viandant5 8 лет назад
probably the problem is the toner cartridge, too old or near the end of its life.
@udaysingh2653
@udaysingh2653 8 лет назад
change the durm
@ahmed300ful
@ahmed300ful 7 лет назад
my printer stoped after t took the whels and cleaned them i.e the roller on the side
@aminulislam-im1jk
@aminulislam-im1jk 5 лет назад
FINE VIDEO
@madusankadissanayake8384
@madusankadissanayake8384 6 лет назад
How can print the cards ? (A4 size-hard boards)
@viandant5
@viandant5 6 лет назад
A4? you have to select Tick paper in the printer folder, if your printer support this weight
@madusankadissanayake8384
@madusankadissanayake8384 6 лет назад
what is the considering paper weight or paper thickness
@viandant5
@viandant5 6 лет назад
look at the features of the printer, You'll find the thickness and the weight of the paper
@enricotanzi5485
@enricotanzi5485 9 месяцев назад
mi interessava vedere come si smonta la parte sinistra dove ci sono i rulli e si arriva al solenoide, ma nel video non c'è
@viandant5
@viandant5 9 месяцев назад
Mi spiace non l'ho messo perchè mi sembrava semplice una volta smontato il pannello laterale
@niketankosare6264
@niketankosare6264 8 лет назад
sorry sir... i have try another new cartridge...but found problem same. lower roller is damaged.
@viandant5
@viandant5 8 лет назад
with printing with shadows you mean a grey background or a repeated image? in the second case the problem probably are the fuser rollers
@gonsalo333
@gonsalo333 8 лет назад
Sir, Viandant5 i too face the same issue thus found out the was a problem with the fuser thus change the pressure Roller in the fuser assemble. But it continue the same....
@viandant5
@viandant5 8 лет назад
Change the toner cartidge, it could give similar problems
@wo_ai_zhongguo
@wo_ai_zhongguo 6 лет назад
Nice
@රසවින්දන-ඟ1ත
@රසවින්දන-ඟ1ත 2 года назад
When my printer paper arrives, the orange bulb lights up..the paper goes ML 2161
@viandant5
@viandant5 2 года назад
No paper jam? Check the paper settings in the printer folder
@රසවින්දන-ඟ1ත
@රසවින්දන-ඟ1ත 2 года назад
@@viandant5 ok..Thank you
@sivabalanvkl
@sivabalanvkl 7 лет назад
i have samsung ml 1670 printer i am facing problem of white paper comes out when printing ,i also try new catridge also same problem continious .so problem in printer what can i do next help me sir and give your phone number
@viandant5
@viandant5 7 лет назад
I think you can only try to clean contacts between printer and cartridge inside the printer, may be update the firmware but probably ther is a defective PCB
@vishnunatraja
@vishnunatraja 2 года назад
My printer shows lsu error may be due to dest
@viandant5
@viandant5 2 года назад
LSU is the laser scanner unit
@adityamourya
@adityamourya 8 лет назад
please provide a video to repair scx 3401 fuser
@viandant5
@viandant5 8 лет назад
ok, I'll think it over
@adityamourya
@adityamourya 8 лет назад
Sir want to assembling and disassembling part of Samsung scx 3401 model printer
@viandant5
@viandant5 8 лет назад
Sorry but I have''t any manual
@NAVYSILSOWAR
@NAVYSILSOWAR 6 лет назад
Deme quemó sobre descarga de energía que hago gracias
@bubaykarmakar378
@bubaykarmakar378 3 года назад
3 PAGES PRINT ..........4PAGE STOP PRINTER PROBLEM .....PLSE SOLV
@viandant5
@viandant5 3 года назад
what do you mean? does it stops printing with a paper jam?
@Waqarkhan-cw3po
@Waqarkhan-cw3po 7 лет назад
how i dissembly the ml 1640
@viandant5
@viandant5 7 лет назад
It's different, I've no instructions
@joseluisdavalosc.5418
@joseluisdavalosc.5418 7 лет назад
how clean sensors?
@viandant5
@viandant5 7 лет назад
with isopropyl alcohol
@joseluisdavalosc.5418
@joseluisdavalosc.5418 7 лет назад
but where is the sensor
@viandant5
@viandant5 7 лет назад
What sensor do you mean? The thermistor? It's near the fuser in the back of the printer
@joseluisdavalosc.5418
@joseluisdavalosc.5418 7 лет назад
the paper sensor, where`s when print take 2 sheet
@Upadhyayviraj
@Upadhyayviraj 7 лет назад
Hello sir i have i samsung ml1676 printer gare setting videos uplod
@viandant5
@viandant5 7 лет назад
What? you need information on how to set the printer?
@jeannotst-onge6680
@jeannotst-onge6680 4 года назад
comment imprimer en couleur
@nanushaikh7040
@nanushaikh7040 2 года назад
1676p printer give a nosie Where is promblem
@viandant5
@viandant5 2 года назад
Which noise? Did you try to change the toner cartridgw?
@abdulmoiz689
@abdulmoiz689 8 лет назад
i have xerox 5765 but
@swatidharpale9254
@swatidharpale9254 6 лет назад
My printer is printing back lines on it
@viandant5
@viandant5 6 лет назад
which printer? vertical or horizontal? may be the drum, or the wiper blade
@chandrajanani6446
@chandrajanani6446 Год назад
Fusera kalata sonna Vera edhaum kalaturinga
@aibaib4549
@aibaib4549 5 лет назад
I have an inpressor 1660 when print does not output information sheet goes blank can help?
@viandant5
@viandant5 5 лет назад
it does not print only the information sheet? and the others printout from PC?
Далее
Incredibox Sprunki in geometry dash
00:19
Просмотров 1,7 млн
Ремонт принтера Samsung ML 1641
30:03
Просмотров 76 тыс.
samsung ML-1666 printer power problem
5:55
Просмотров 15 тыс.
How to remove and clean Samsung Transfer Belt CLP-365
8:53
Incredibox Sprunki in geometry dash
00:19
Просмотров 1,7 млн