Please be advised BlvdHome will not be responsible for any damage or further issues caused to your appliance by trying these methods yourself. If you don't feel comfortable trying the methods shown in this video, call a professional to help you.
If your dishwasher is not draining correctly what can you do to fix it before you call the expensive appliance repairman? In this video we share some easy and important things you can check which will resolve most reasons why dishwashers are not draining correctly. We hope this video will save you time and money!
Usually when a dishwasher is not draining and leaving water in the bottom of the dishwasher it means that there is some type of clock in the drainage system. This may be in the drainage hose, dishwasher filter, or even inside the dishwasher components.
Here are the three steps that you should take before you call that appliance technician or repairman.
1. Make sure that you can hear the pump trying to pump water. This is done by turning on the dishwasher and listening for a sucking sound that has kicked on to try to drain the water that is siting in the bottom of the dishwasher. If you turn the dishwasher cycle on and here absolutely no sound after a couple mins you most likely have a broken pump and that will need to be replaced. If you do here a sound (this is the case most of the time) you will know the pump is trying to work, but for some reason it is not working and it may be as simple and something has clogged it. Now you can go to step 2 and check the most common areas that get clogged.
2. After you have verified that the dishwasher is tying to pump the water you need to open the dishwasher and usually you will have sitting water in the bottom that needs to be removed. To do this it can be as simple as taking a cup and scoping the water out manually or you can grab a shop vacuum that will quickly allow you to suck all the water out. With the water removed, you can now access the first layer of filter that your dishwasher has. Sometimes you may need to remove the lower wash arm to access the filter. To remove the lower washer arm usually all it takes is a simple twist and it will come off. At this time remove the filter and if this has not been done before it may have food and scum/grim that has built up on the filter that is not allowing water to freely move into the dishwasher pump. This filter can be cleaned easily by removing it and rinsing it in the sink while giving it a scrub with some type of brush. (Tooth brush works great!) Tip: Some dishwashers have multiple filters connected together and you should remove all of them and clean each of them thoroughly. With the filters removed you should also check the small opening where the water enters into the dishwasher pump to make sure there was not some item that make it around the filters and is now clogging or blocking the drain.
Tip: If you have recently had a new dishwasher installed and you have a garbage disposal that the dishwasher drain hose is attached to. You should check to make sure that the disposal plug was removed prior to dishwasher installation. Each disposal has a plug that blocks the connection where the drain hose from the dishwasher is connected. This is because they want consumers to be able to use a disposal with out a dishwasher. To check this all you need to do is unhood the dishwasher drain hose and then put your finger or long kitchen utensil into the hole and if it does not enter the disposal cavity because of a solid wall you will need to remove the plug.
3. Now we are going to check to see if there is a clock in the dishwasher drain hose. This hose is on the back side of the dishwasher and usually is ran under through the underside or back of your cabinets connecting to your sink or garbage disposal. The best way to make sure there is nothing stuck in the hose is to remove the hose if possible. You unhook it from underneath the sink. (There may be standing water inside the hose so make sure you have somewhere for it to drain into once you unhook it.) You can not pull the dishwasher out by removing the installation screws that are usually drilled into the underside of you countertop. With those removed you are able to pull the dishwasher out and unhook it from the back side of the dishwasher. Now if possible it is best to run water through the hose to see if there is something stuck inside of it not allowing water to flow freely.
These are the three tips to help you fix a dishwasher that is not draining correctly. Hopefully it has help solve your issue and saved you some money.
@BoulevardHome
You can also follow us on our other social media platforms or visit our website.
Website: www.boulevardhome.com
Facebook: / boulevardhome
Instagram: / boulevardhome
Pinterest: / boulevardhome
22 июл 2024
