Dividing angles - the parallel board method - Woodworking Tips!

Подписаться 272 тыс.

Просмотров 102 тыс.

50% 1

A little while ago we looked at the first and most important method used in joinery to divide angles, using a pair of compasses. Today we're looking at method #2 for angle bisection - the parallel board method. There'll be a couple more methods coming up in tips videos so don't forget to subscribe! This method is handly for bisecting angles in all sorts of situations - if requires having a board or plank of wood to hand with perfectly parallel sides, such as a piece of skirting board / baseboard.
Method #1 - Dividing angles with compass: • Dividing Angles for Wo...
Method #2 - Dividing angles with parallel board: • Dividing angles - the ...
Here's some affiliate links to products I use or would consider using - read more about affiliate links at the bottom of this description:
Silverline Adjustable Bevel / Angle Finder: gosforthhandyman.com/uk-links... (UK)
Swanson Sliding Bevel: gosforthhandyman.com/us-links... (US)
Bosch Digital Angle Measurer and Mitre Finder: gosforthhandyman.com/uk-links... (UK)
Bosch Digital Angle Measurer and Mitre Finder: gosforthhandyman.com/us-links... (US)
Drawing Compass: gosforthhandyman.com/uk-links... (UK)
Drawing Compass: gosforthhandyman.com/us-links... (US)
TOOLS & PRODUCTS I USE: gosforthhandyman.com/products...
NEWSLETTER: gosforthhandyman.com/newsletter
PATREON: / gosforthhandyman
SHOP: gosforthhandyman.com/shop/
EXTRA STUFF ON THE WEB: gosforthhandyman.com
INSTA: / gosforthhandyman
TWITTER: / gosforthandy
I sometimes use affiliate links - these don’t cost you a penny and help to keep this channel going. Read more about affiliate links here - the fairest way of funding the internet: gosforthhandyman.com/affiliat... - thanks so much for your awesome support!
#GHTL #Joinery #Woodworking

Хобби

Опубликовано:

31 авг 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 81

@wayward_dom6865 5 лет назад

Easy peasy lemon squeezy, always struggled figuring out angles. Top tip,cheers 👍👍

@markrowland5393 5 лет назад

Simple and effective. Thanks Andy.

@josehmaru 5 лет назад

This is way simple and clever... This is from now on my go to method .

@josh5549 2 года назад

Best video I've found so far

@edwardhugus2772 2 года назад

Great tip. Always knew the compass way, never thought of the board tip!

@munkytaint666 5 лет назад

Equally easy to understand as it is helpful. CHEERS

@lilchugi 5 месяцев назад

Finally the video I've been looking for thanks

@charlesarnold4963 5 лет назад

Useful and simple. Brilliant.

@ron1martens 4 года назад

Excellent. Thanks for the time doing this. Useful. As I have been doing some brick paving lately.

@gp94403 Год назад

Applied high school geometry. I love it!

@Tazzy4182 4 года назад

Great hint, worked a treat when I was foing my decking, thank you

@orbepa 5 лет назад

What a great tip - thanks Andy

@samsama8254 3 года назад

you make life much easier.you are great.

@pianobar7801 3 года назад

Very helpful, thanks for posting.

@horsetowater 7 месяцев назад

these are excellent and never age.

@jc3444 3 года назад

Excellent, thanks for this great tip.

@RobbyPickering 3 года назад

Amazing video mate. Thankyou

@mariah4451 5 лет назад

Thanks for sharing that super useful and handy tip. I've screenshoted it so I've always got it handy :-)

@iamjimgroth 5 лет назад

Great tip!

@clintbartenstein6876 5 лет назад

Great tip! Thanks

@TheDoosh79 2 года назад

Awesome, cheers mate.

@davegower123 5 лет назад

Nice tip!

@MrSbenn69 5 лет назад

Great tip, Thanks Andy,👍🙂

@GosforthHandyman 5 лет назад

👍😀

@MatthewWrighty 3 года назад

Nice gonna try this.

@soniacoronado6834 Год назад

TY YOUR THE BEAST

@zx6mick 3 года назад

Thanks for sharing.

@Bill.L.Carroll 5 лет назад

Neat and easy, once you know how 👍 Cheers mate 👍

@WoodworkingBrewer 5 лет назад

Great tip for skirting board on a none 90 corners too cheers Andy. P.S. you forgot to mention the podcast starting next week, glad I’m subscribed to both you and Peter.😁👍

@GosforthHandyman 5 лет назад

It's a secret until today! 😂

@EddyCarroll 5 лет назад

Great little tip Andy. And congrats on hitting the big 2-0!

@GosforthHandyman 5 лет назад

Thank you Eddy! 👍

@NickDV007 5 лет назад

Nice one Andy 👍👍👍 People may finally realise that by going back to basic, you don't have to spend a fortune on fancy tools and digital gauges to find an angle 😉

@GosforthHandyman 5 лет назад

Exactly! 👍😀

@jonnakins 5 лет назад

I got a digital angle gauge in lidl for €10 and it works great.

@NickDV007 5 лет назад

Jonnakins 1 - They do work great 👍 Andy knows what I mean 😉

@leonardorojas1781 3 года назад

I have a digital angle gauge too. But learning these tricks is necessary, and cool. Btw. It's a General Tools digital angle gauge, with Bluetooth. Ha

@Cradley684 5 лет назад

Great tip our kid !!!

@jasonchild482 5 лет назад

HI Andy. just stumbleded upon this. Even easier way ,means you don't have to draw it out on paper. Get a piece of scrap with a square edge, smaller than the length you will need. Butt it against the wall (as you would with skirting, stood up) where the join is and push as far as the wall will allow (towards the join). Pencil line the floor where the skirt sits, in front. Same on the other side. Where the two lines cross,(your angle) mark from here back to the place where the wall join is. Use a bevel and set the angle. Use scrap to try. Any gap at the front, lessen the angle slightly, any at the back, make it more of an angle. The angle should be the same on both sides, but in reverse. Done. Hope that makes sense. How a carpenter does it.. Cheers

@hansdegroot8549 5 лет назад

Many things are so easy when you know how to do it. Great tip. Thanks for sharing. In case 'd need this kind of dividing more often, I think I'd prepare a dedicated piece of wood (MDF, tile, glass) for this purpose and mark it somehow as an extra tool. After 4:03 I expected you to flip over the bevel to show us the double check that indeed those angles are really exactly the same. But then I realized this is not possible because of the screw you tighten the angle with. I suppose it can be checked moving the shorter leg of the bevel towards the newly drawn line (just on the other side of that line where the longer leg of the bevel is now.

@GosforthHandyman 5 лет назад

👍

@Tephnos 3 года назад

Hi mate, Doing the exact same thing here with a bay window, was trying to wrap my head around how I'm supposed to cut my pieces of wood, so this helps a lot. One thing I want to ask is how do you fill those seam lines on those MDF boards when they're glued together and painted? Do you take wood filler on them or caulk it to prevent expansion cracking it?

@Cloppa2000 5 лет назад

Didn't think u could get any easier then the starrett protractor but this is so simples! Once marked I'd have peeled the sticky tape off the floor and stuck it on the piece of wood to cut!!

@frank1847 5 лет назад

Andy the bay window M D F window board. Did you oil that?. It looks great!.

@brianpatrick8441 3 года назад

I like your system alot! Bosch make a really nice angle finder that might be a better layout tool instead of bevel square? But then again i use the bosch for metal rail layout and not wood. Good video

@howardbecdove9780 5 лет назад

Loved that one ..... loved it!

@kierenhudson6331 9 месяцев назад

Could you use the angle finder in the corner of the joint say its says 98° for example... could you do 180° - 98° = 82° 82° ÷ 2 = 41° and set that on chop saw without needing to draw?

@ianscottuk 3 месяца назад

Thing that never seems to be discussed is why you actually have to bisect the angle in order for it to work..... As I have just found out doing a bay window sill

@nickridiculous 4 года назад

Good old intertubes! I have a bay window, a bevel gauge and a baseboards, now all I gotta do is cut 'em.

@paulmcgeoch2603 5 лет назад

I just use the trend angle rule 💪

@sherianbhemal2052 2 года назад

Hi good morning, how do I calculate an obtuse angel for skirting board

@superiorbeing95 5 лет назад

I just put the end of my set square at the point of the angle and draw a line at 90 degrees, I do the same from the other side and it bisects the angle, everybody has a set square or speed square with them.