DIY 電動ドリルで旋盤の作り方 How to make hand drill lathe. 

It makes me so glad I was taught at boarding school in 1966 age 11 how to use woodwork machines and metalwork too. I gather kids today don't get practical lessons like that these days.

I made my first lathe back in 1974. I had two horizontal drill stands clamped to a cement stair panel, One held an old black and Decker drill and the other held an old chuck, which was my dead center. I used a brass fitting which I shaped to be the live center bit. I used a lump of timber too act as my chisel support and the chisels were all made form old metal files. I would turn nose cones from balsa wood for my model rockets. Later my father got hold of an old Knitting machine base and I used that for the base of the lathe and mounted the horizontal drill stands on to the frame and one on the carriage which was my dead center. Fun times.

私のＤＩＹ範囲なら十分事足りる。道具は使いようでいろいろ応用できるんだという事も大変参考になりました。行動派の貴殿にエール！！

Muy buena idea, te felicito !!! Y muy buen video, sin música, sin palabras y fluido. A la acción !

I liked it. It's the real deal. Application of excess glu, dropping stuff and the best was the wood piece jumping out. All natural and original. Some of the other videos I watch are so perfect and sometimes too perfect. Good job

Good Job. Thanks for sharing.

.An effective practical low cost idea. Thanks for sharing.Your work jumped out dangerously because you did not drill a countersink hole with a centre drill so that the tailstock centre can go in further to lock your wood. Remember to oil the tailstock centre where it contacts the wood. It does help. Periodically readjust your tailstock as the vibrations can loosen the the contact at the tailstock. Your tool resr should be adjustable to be as close to the wood as practical to reduce vibrations

Muito bom o torno caseira

DIYには丁度良さそう！やってみよ！

This is one of my favorites, but i see room for improvements. This is the first that I will try. Some of the vids are more complicated and expensive than just going out and buying the tool.

....Thank You for posting this....

Buen trabajo amigo,he aprendido mucho con Ud. Gracias desde Cordoba(España). Saludos

Nice one! Very easy to build and no special parts needed. Thank you!

指輪の研磨に使っていた機械、手作りだったんですか。すごい！

You is off the Best my friend.

Definitely trying this

よくやった！

exelente video abrazo desde ARGENTINA

Sy suka dgn cara2 simpel kaya gini buat pelajaran baru good good deh

parabéns sem disfarces mostrando erros ocasionais e imprevistos👏👏👏👏👏

I don't believe I'll ever need a file handle so badly as to go thru all of this, but it was certainly entertaining! Nothing dissuaded him...he just kept right on truckin like a man on a mission with nothing but the most basic of tools. Gotta love it! Bravo!

comecei a assistir seus vídeos hoje, impressionante como você tem idéias ótimas, hoje vai ser o dia todo só para assistir seus vídeos kkkkkkkk 10000000000 likes

Super practico, facil de elaborar, lo estare fabricando para mejorar mi taller de bricolaje, gracias por subir el video.

I like it. Came to a little bump in the road, fixed it, moved on.

Genius! With simplex tools you made a perfect lathe.

Very nice👌a little reinforcement of the chuck jaw and it will have more gripping power to hold. 😊

In live it's this same. It's very good.

move your tool rest so that it just clears the job a lot less chance of it flying out and gives more control

Gracias, Mercy, Thanks!

Thank you for sharing your knowledge.

simples,barato,prático e satisfatório,parabéns mestre

Gostei meu amigo. parabéns

👍

Muy buen aporte! Saludos!

Muito bem ! Sr da terra do sol nascente.

Good job with those tools!

Congratulation. good my friends

Brilliant, very simple. I will try to one the same, thanks!!

For the most part the wooden feed stock was a couple of down the length ripped 2 by 4s. Pretty clever use of materials, I'd say.

Excellent work !!! Just be carefull the wood doesn't get wet and twist !!! Good idea to cover the wood with 3 coats of paint or varnish to protect it from liquids !!

Saya akan coba buat seperti itu lumayan menambah pengetahuan buat semua orang,,,

Well done. I'm sure you have improvements in mind, but it is a starting point for turning small wood parts.

Muito bom!

very simple and nice to operate.

I am so glad I watched this vid cuz I learned all the things what NOT to do although the idea is pretty good it needs refining for sure.

飾り足も削る事が出来ますね。 ´　　　　　　　　　　　　　　　　　　　´

I'm no expert at wood turning but just thought you might have took corner's off the wood before you started and seems like the tool rest was a bit far from the work and tailstock didn't seem very strong nice idea though

Simple, I am making this one

Muito boas suas ideias , vou fazer um. Obrigado.

Parabéns...esse seu torno caseiro foi o melhor e mais fácil de fazer que vi até agora. Show !!

MUITO BOM GOSTEI

i don't know much about lathe safety, but the project looked thought thru and done well. Also, the video flowed very well. Good job.

Molto interessante complimenti

I love it man, i want to try making one...

I like it. Very good.

Good gig, will really good to have an idea the dimensions of pieces!

I have to try this! 😊👍👌

Que gambiarra! A ideia foi boa, mas a execução precisa melhorar, assim vai vir toco na cabeça toda hora.

buena idea señor,hice una igual solo que la arme sobre una mesa para dar mas estabilidad al torno. GRACIAS.

Thanks for the upload. I’m going to make one, but I won’t be using a drill as a power source. I’m going to use a bench grinder motor.👍👍👍

Great effort. My greetings

Muito bom mesmo

Nice

ótimo muinto bom brother.

How smart! I love it.

Fantastic 🤘

Super Coole Idee..

you are te best!

Excelente muy facil y buena idea muchss gracias.pero yo le dare mas altura

Как говорится, если руки золотые , то не важно от куда они растут))

very nice

thanks for video

muy buen tuto

muito bom

well thought out.

I'd have to agree with those below. The end opposite the drill needs to have at the least a triangular brace. The wood brace holding your pivot bends out away from the piece when you are tightening your pivot rod. This will add excess wabble since your center end is not securely fixed. It will also put excess stress on your screws securing this upright and cause it to lose integrity.

In this budget.. 💰💵💴💶 $ it is great. 👍👍👍👍

Crude bet, effective. Pretty Good Idea.

C'est plein d'astuces, c'est intelligent, ça me plait ! 👍

Aí e top bão demais da conta 👏👏👏👍

I think this is great, sure there are some slight bugs to work out, but that's how we got to CNC in the first place, I think?

emege saygı. yaptıgın iş çok güzel ama tetbirler alman ve dikkat etmen gerekir

Very nice leth machine

impressive....thumbs up

Well done,

Why did you drill the hole in the tailstock by hand with another drill? I guess you can easily use your hooked drill to make the hole on it using the same drill bit.

Great thanks for sharing a brilliant idea merci l' ami :) :) :)

Excellent.

Very nice.

Nice idias

Others have mentioned the fact that the tool rest is too far from the work. Another thing: if you must touch the spinning stock (feeling for smoothness, sanding, oiling...) always do it in back, never on top or in front. Imagine your fingers getting caught and jammed in the tool rest. (Which is virtually guaranteed with that big gap.) Always be aware that a lathe is one of the worst tools in the shop for grabbing hold of body parts and destroying them. Always come at it with preventing that as Step 1.

Hay quá bạn ơi

ベースが木製だとどうしてもしなるから危ないですよ。 固定用の土台スライドすろことを考えておられるならネジ式ぐらいが安く済むんですかね？ L型アングルとH鋼とかで強度取りつつ安くできる様な気がします。

Good very creative. 👍

*очень простая конструкция, то что нужно! спасибо!*

cool idea :) @12:41, the hook on the bit, what's the name ? how can the drill holding the wood ? is there a hole on the wood ? thanks

案ずるより産むが易し、ですね。勉強になりました。

Hey just a tip. Try moving the right side in a little bit as you go it will wear down on that side

الله ينور

押し台の締め付けが弱くて物が顔に飛ぶかもね。。