Many thanks for the nice video and your efforts. Requesting you, Please post a video on car and 2 wheeler battery charger and also a video on how to test voltage in AA, AAA And similar batteries.
Why so many dislikes, nice work and it looks great, yes, some things could be better, always some things could be better, but you have good reasons for your decisions. People should vote for the idea and effort but they often just vote for if they get something or not. Are you using usual superglue for the pvc pieces? I tried so many sorts and except for superglue gel they all suck.
No you need to have the same voltage and capacity batteries to use a single TP4056 module TP4056 module has over-charge protection if you use two batteries that have different voltage and capacity, then if one battery charged fully then the tp4056 module will automatically stop charging due to overcharge protection that's why one battery will never fully charged until the fully charged battery removed manually So, I suggest using two separate modules ( and sorry for grammatical mistakes😅)
Each charging module is capable to charge on 5 volt 1 amps independently, but you are feeding through a mobile charger 5 Volt 1 Amp only.... So it will take more time to charge the battery.... you should use a 5 volt/2-3 amps SMPS to feed those TP 4056 charging modules....
you are absolutely right But TP4056 module will become very hot if we use 1A current And 2A chargers also generate high heat So you need to have good ventilation for that As I have used PVC enclosure with no ventilation holes, I suggest using 1 to 1.5A Current charger only
@@techengineer278 roboelements.com robu.in robokits.co.in electronicscomp.com ( return policy achi nahi he in sites ki to apne risk pe kharidna, waise muje etni jada koi problem aai nahi abhitak or amazon pe bhi cross check kar lena price amazon ki return policy achi he )
@@ganeshsinha519 There are may many websites where you can find components at a cheap rate like roboelements.com, robokits.co.in, robu.in, electronicscomp.com But return, replacement, and order cancellation policy of these websites are not good as Amazon and Flipkart Also sometimes delivery time is more so if the price difference is less after adding shipping fees then I recommend buying from amazon
Any idea how I can remplace switch of voltmeter, by some automatic switch of like 3 sec, to alternate itself the reading between battery 1 and battery 2 ?
The input power is 1A anyway, why use 2 pieces TP4056? You can connect the cells in parallel and load them with a single TP4056. This means that a 3-stage button is not required.
