DIY 2009 DODGE AVENGER BRAKE PAD JOB, EASY AND FAST 

Wow man I was just clicked on ur video to get a few tips on how to do my brakes and at the end when you started to encourage the ppl about putting God first really spoke to me man amen

This video was awesome. Then he mentioned Jesus at the end. 🙏🏼 thanks man.

Man you saved me $200 I didn’t know it was this easy to replace. God bless you brother.

The EZ and fast way and well Done , someone give this guy a medal!

I highly recommend this video to anybody who don't have the time or money to do this. Thanks for this video man God Bless!!!

THAAAANK YOU SO MUCH!! I needed this video. You took your time, you didn’t rush. You reminded me of my pops, he was a mechanic. Passed when I was young so he never got to teach me how to do certain things on a car. I needed this video. 🙏🏼 tryna make my dad proud & do it myself like he would!! 👨🏽‍🔧

excellent video old school!!! only thing you forgot to let them know is to take the brake fluid cap off from under the hood...so once you push that piston in on the caliper you dnt push air back into the brake line... if you dnt take the cap off you will have to bleed the brakes after the change because 9x out of 10 you pushed air back in...and it will be very dangerous to drive under those conditions...but other than that this was a nice video... GOD bless and keep making blessings for others

Shows you how it's done just as a dad would show his kid. Everything you need to know to do it safe and right. Thanks for this.

Thanks for a great learning video OSF. More so thanks for including Jesus in your message to the people.

Never put on brakes before and thanks to you I learned how to do them myself. Thanks for the information man.

Great video, very informative. Only one thing I could of done without of was the ending. I came for breaks. Not my soul. Liked and subbed. Keep it up

This video helped me get my 2012 done. Thanks bro. Salute.

i really like your videos and i like the quotes at the end keep up the good work brother

Thanks for sharing Oldskool. I learned a few new things using the silicone on the back of the pads and on the caliper housing. Knocking off the glaze on the rotor was also new to me, thanks for the update and improvement for this viewer. I did notice one thing different in regard to the brake pins which hold the caliper on and slide(slide pins). Eric the Car guy advocates to use silocone paste on the pins, I noticed you used antiseize lube. I think Eric advocated silicon because it does not affect the rubber, I do not know if antiseize affects rubber(swelling). Either way excellent demonstration of doing brakes.

Thank you so much! This video is so helpful.The explanation is clear and the camera is very well positioned！

Props to you Brother. I'm about to service my 2014 this week. I appreciate you and your informative video. Keep up the great work.

Thank you for this video, I will do this tomorrow morning. I m trying to fix some brake grinding. You are always a great inspiration for me. I fixed my car just by learning from the internet. I own a very cheap car i afford it because i fixed it myself.

Your tutorial was the best one I've found. Thanks man...

Thanks brother. Changing mine before I take a 600 mile road trip down south

I use this video now as a reference for other cars too, great walk through and attention to detail. Thanks a ton man

Thank you, I'm subscribing. Great job. I'd like to hear your Bible teaching too.

Great video bro! Just got a 2008 Avenger and don't trust it with any one but myself.

Best how to video I’ve ever seen made s*** really easy

Awesome video, sir. I appreciate the details and recommend you to any of my friends needing to do simple maintenance on their vehicles.

Thanks bro I really needed this, thanks for all the detailed explaining.

Thanks for a great detailed brake job and speaking for Christ

Loved the video. now i actually have something educational to watch on youtube.

God Bless you, every where you are. Thanks brother.

Thank you for the walkthrough brother. Very helpful and detailed. Thanks for saying what you said at the end man. idk why but it hit me hard. take it easy buddy.

Thank you for the time and effort to film this.

You are a hell of a man. Respect.

Like the video, straight forward and to the point. Well done

Great video. Detailed and to the point. Thank you.

God First!!!! Thank you Old Skool

Thank you for this great video! To the point and great editing. No b.s. Helped me finish the fronts on gf's Avenger. I owe you a beer

Solid video! Thank you for your work.

You are detail oriented. Thank you

Great video quality, instructions, and explanations. Thanks bro!

This will be my instructional video tomorrow, when I attempt to change my rear brakes on my 2014 Avenger. Thank you sir for your attention to detail.

that anti-seize I call it "everywhere" that shit gets everywhere lol.

when you push in caliper piston you don't take off break fluid reservoir cap before you push in piston? and you don't have to bleed breaks anymore? thanks for video very cool

This video helped and repent to Jesus Christ in the end was the golden cherry on top ❤ thanks unc

great video and great ending! I subscribed so I can support the videos

God Bless... Thanks abunch...

That was awesome! I appreciate that my friend!

Nice video Champ.

Hi ! TKS for video ! It is awesome ! Please tell which type of lubes you applied on this video ? It is vital to know

Awesome video! Thanks!!

Great video brother God bless you.

Thank u so much for this video. I am a woman and people tend to think that makes me incapable of repairs on my vehicle. I DO have a question though. Were u working on 2 separate tires because one of your steps confused me.

You are awesome!! Thanks for your video.

Good video, it helped me out

Nice video, thank's for that!

Awesome video, serious question how do fix speedometer on my '95 Dodge ram 2500 the gauge on the speedometer don't work, but all other gauges on cluster do. What's the problem that I'm having? Thanks.

Great video. Thank you & God Bless!

"Hey Guys! Chris Fix here!" yeah man, couldn't hear the vid because I was swearing too much. This one explained better for my kind of vehicle.

Nice vid. Can you do a video on how to change the rear brakes?

Great video. Thanks so much. God bless you:)

Thanks for sharing the video. God Bless bro

Great video

Great vibes ✌🏻

Thanks so much for this bro. Very clear instructions.

Thanks Man!!!! Appreciate The Video!!!!

oldskool, hey bro how was you spinning your rotors? was the car in drive? and how do you determine whats glaze, is it shining?

safe guy good job

Is it the same with a 2013 Dodge avenger? Also thanks for uploading this video.

Great video bro thanks!

Mad love brotha thanks

My 2009 dodge avengers rear brake caliper plug on the top cant be removed because of the stupid brake line so I cant replace the brake pads, and help?

Does this also apply to 2013 Dodge Avenger ?

Thanks brother!

I'm mind blown about only removing 1 caliper bolt 🤯 How have I been doing it the hard way all these years!?

great video!!!

i have a problem. I was driving earlier and hit a real big dip, the road was covered with water so i didnt see it. The belly pan or the plastic cover for the bottom of my 2010 avenger came off and there was also two metal hoses that are held together by a plastic piece that im assuming became unlatch er sumthing if anyone knows anything about it can you please reply asap this car is a daily driver and dont want it to mess up

thanks a lot man

Friend of mine has a truck with 168k miles on it with the original brakes. I asked him how he managed to do that? He said; "I don't stop- I just go"!

just like that cool video

Nice job, I subscribed.

When changing the pads..how often should the rotors been changed also??

Thanks very helpful

Thanks for the awesome brake change video.....especially the extra safety tips a lot of people forget. One question....where did you get the caliper push tool? I have used several items to do this but I really like your tool. Please message me back about where you purchased the tool. Thanks Again! ;@ )

Thanks for sharing

Mad respect

Would this help with 2014?

This video is legit

Muchas Gracias

I have never seen anyone use anti-seize on brake clips, use a standard brake grease.Second, never, ever lay your brake pads face down on a driveway...….Use a torque wrench, not a sledge hammer.....

Awesome 💯

Is it the same for a 2010?

You should use brake grease not anticize compound.

Those new pads don’t look a whole lot better than the old pads. Don’t see a lot of material there. Otherwise really good video with emphasis on safety. Also good tips on adding lube / antisieze to the clips as these are sometimes hard to get out when they have corroded to the bracket.

nice to see somebody else throw that tire underneath. you never know

thanks bro

name of that clamp?

Do you even have a Jack

were are u located

old school funk

💎💎💎

should I open a bleed valve before I push the piston back

I dont have a c clamp. Whatbelse can I use