DIY 3D Printed Sim Racing Pedals - Building Tutorial 

Yes you can find all here www.diysimstudio.com/produit/diy-sim-racing-pedal/ PARTS BUYING GUIDE: SPRINGS AND ELASTOMERS

The web site work perfectly, I don't understand your comment.

Thanks

Hi, Between 80€ and 150€.

Hello, I don't recommend a load cell weight under 100kg. Don't worry, the calibration can be set in the setup of your game. The informations about the load cell compatibility is indicated here : www.diysimstudio.com/produit/diy-sim-racing-pedal/ in the "PARTS COMPATIBILITY" section. Best regards, DIY SIM STUDIO

@@diysimstudio8225 Thank you very much, I hadn't noticed that part, my lack of attention

@@tiago.32g50 You're welcome. 😊

Hi Steve, thanks for your purchase. 😉The recommanded material and infill is indicated in the name of the .Stl file. The Pla or Abs is recommended. The 3D printed pedal files are in the folder Production > 3D Printed Edition

@@diysimstudio8225 Ok. Mine has infill at 100% where recommended but nothing for parts that don't require 100% infill. None of mine have any mention of material, though you've given me that info so I'm good there. I'm getting crazy quotes for 3d printing these so if I go that route I might just buy a 3d printer and do it myself. I've been looking for a reason to get one! Thank you.

@@stacarter if the infill is not indicated, then you can use the infill you want, the minimum is 20%

im here with that as well allthough not for this particular project :) I wanted to make myself a racing wheel and shifters for sim. Bought a Creality ender 3 last month and I'm having a blast doing everything :))) all for under 100 euros :D + materials another 20 or so @@stacarter

Hello, I think the mobile part should be printed on the side.

​@@diysimstudio8225 the side of the mobile part a small round section that protrudes out which would then need a lot of supports

Is there a version of the mobile part for 3d printing where you just use washers instead?

@@afkafkafk There is not mobile part without sides washer, sorry.

@@diysimstudio8225 What about Production -> Optional 3D printed Parts -> Alternative Massive Mobile Part?

Hi, thanks you. No you can't use hall sensor