DIY 400kv Taser - Powerful Stun Gun At Home 

Ey dude, can you explain me why it can't produce 400kV of energy? I'm quite new to electric theory so could you explain me this to me please?

@@enrique1305 Because 1KV will leap a spark gap 1mm wide and 10KV will leap a spark gap 10mm wide and 100KV will leap a spark gap 100mm wide and 400KV will leap a spark gap 400mm wide and the secondary of that tiny transformer isn't 400mm wide so 400KV .would just leap across the transformer internally, causing a short circuit and destroying the transformer. The transformer isn't even 40mm wide, and the secondary wires aren't kept 40mm apart so even 40KV would arc inside this "taser" thing and destroy the batteries. Remember, a leaping arc can use random metal objects as "stepping stones", so the only gaps it really needs to leap in this case are wire-to-battery and battery-to-battery. That's a very short gap... and it doesn't leap there so the voltage cannot possibly be very high. In a 400KV system, you need to keep everything in the secondary path at least 400mm apart and prevent any metal between the secondary wires or you'll get arcing where you don't want it. In addition, you really need corona ribs everywhere to prevent electrical short paths through dust and oils on surfaces. Every automotive ignition system has corona ribs like that everywhere, and automotive ignition systems use only 20KV to 40KV. The spark gap shown at 3:04 is only about 5mm wide, which tells me that this little transformer probably prodoces a real-world secondary voltage of about 5KV with a 6V input... a mere 1:833 winding ratio.

@@enrique1305 Also... please read Anthony Garofalo's 1-star review; he actually measured the output voltage at 10KV.

​@@timhofstetter5654but why did it create plasma and lot of air when I connected 4 super heavy duty camelion batteries

​@@timhofstetter5654 I measured the distance and it created plasma within 1 cm gap

heres mine that i made ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-67l9LVcIQ90.html

muss man die roten drähte verbinden ?

heres a Bigger n better one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-67l9LVcIQ90.html

@@stalnos3581 the module is alot cheaper than regular taser. In my country. I made a homemade taser for just 1.2 dollars. If I buy a taser. I spend 10 - 15 dollar cheapest.

lol hahahaha right!? I’m just looking at the link on amazon too thinking the same thing.

@@XenyQ_OFFthat doesn’t make the title of the video any less false. Edit: changing words.

@@burntt999 it would be very complicated to wind a high voltage transformer yourself. And it can't be homemade if you need to buy transistors. Capacitors. And such.

How did the guy you bought it from make it though

yes, these wires are the negative wires coming out of the battery packs

heres mine that i made ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-67l9LVcIQ90.html

@@DaSlotho ru-vid.comd1FQX7OPs-g?feature=share nice I did this with mine haha

No, that increases the voltage of the batteries, it is a taser module, the link is in the video description, it takes 3 to 6 volts and 2 amps for the module to work correctly

just don't bring it if its against school policy

me 2 im in philipines

me 3, this is very useful

Me 4

me five👍👍

That's called a tranformer

voltage booster

Connector❤

You buy it 300kv stun gun module it cheaper than premade stun gun

i belive you have to connect the wires to the legs on the same side

courses.ideate.cmu.edu/99-355/s2022/images/tactile_switch_wiring.jpg

Connect all your wires and switches and what not together first, then remember proper plyers they ground you and yeah. Always positive first I was told. As with no ground or negative there's no current atm until you connect ALl of the wires. Aka the negative last ground is so device doesn't become scary and have a pulsating current going to through the devices you decide to Amp up your use and use more power. It'll help you respect electricity and not be a dumb ass or a pussy....

Both black wires on one side of switch / grn on opposite side of switch ( make sure wires are not touching ea. Other or u will have direct contact which will bypass the switch.

Its opposite side output btw

I'm definitely not the person you'd want to ask about this because I don't know a lot about circuitry and stuff like that. id guess that you just got faulty ones because they're from wish. do they make a whining noise when you try to activate them?

@@creativecore2887 Yes, they do !! ??

@@TheHeat55 I believe the terminals may be too far apart, so the module can't make enough voltage to arc across. A larger gap will make louder, but less arcs, which means lower frequency. If the module can't make the arc, I believe it will start arcing internally. Because all the components within the module are close together, the arcs happen more frequently so you get a whining sound. I'm not sure exactly what's causing it, but that's my best guess

@@TheHeat55 try using a spoon to touch one of the prongs and move the spoon closer to the other one. Maybe The taser needs a closer gap

@@creativecore2887 Thank's a million CC ! I have 3 of these tasers, they all worked for a day. The seller wrote that you had to charge them for 10 hrs before they were first used. They all have the same little wire for charging, I'm wondering if it's not a charging problem. Were they over-charged ? The charging light doesn't turn green when fully charged. Anyway I'll try the spoon thing CC. Thank's again for the detailed help 🙂

a taser module

@@creativecore2887 6v?

It’s a boost converter

capasitor 6v to 400kv

i got no clue, sorry

É um módulo de taser está o link de compra na descrição

你这头像有点。。。。

im not sure what that means but thank you

ثثج٨غنلنيمامةتغتبعي٩٧٤٩بع٧قبابعلغذوفب٧قتقلنهف٩ي٦دخفيقخيغلت٩٦قفنكعقحف٧حق٧فعحلغخخف

skema nya Mr rangkaiannya bagamana

lol

What soldering? 99% of the time he used hotglue

You either solder or use hot glue

any switch my friend. on/off toggle, Decore,.. lol push button. i believe this module will shut off after 20 sec

​@@MilkBugswhy will it shut off?

They will download, but it won't be as fast as he said

I was wondering the same

I was wondering the same thing

the taser module

I honestly don't know what could've caused it to fail, but these taser modules are very cheaply made and very finicky so it probably just died. I would recommend using 5-6v though which would be 4 AA batteries.

​@@creativecore2887so using an inadequate input voltage such as 3v would likely broke it? And probably because it was "made in china". 😂 But does your teaser module still working with 5~6v batteries? If does maybe I'll try that if I ever salvage one in the Garage.

Not recommended

Todas as peças usadas estão na descrição

@@creativecore2887 no they are not

@@RayceVR this is the description of the video -------------------------------------------------- In this video, I will show you how to build a powerful taser at home with simple parts, all for under $20! -------------------------------------------------- Materials Used Taser Module: Tactile Buttons: Battery Holders: Soldering Iron Kit: Hot glue gun Tape Two small nails x4 AA Batteries -------------------------------------------------- If you enjoyed this video, feel free to leave a Like and Subscribe for more content like this! You can also leave a Comment if you have any suggestions for making my videos better! --------------------------------------------------

taser module

taser module

taser module

what?

you can get them online

get a resistor for the battery or a voltave control knob.

What is used in the video is in the description

you need to connect the 2 red wires so the battery connects to the transformator thing

Probably, but just either weaker arcs, or less of them

Tyrone

मेल में पसंद है? mel mein pasand hai?

does it turn off when you press it?

@@creativecore2887 i've fixed the problem, the button has 4 legs, and i connected two leg on each wire, when you're only supposed to connect one on each

@@SSL22222 when I connect the button it goes off straight away?

look in the description

yes to connect batteries to transformer

Taser module

Can a nyone tell me?

it would but if you drop it it will stay on instead of automatically shutting off

Thanks

What is it called

momentary tactile button www.amazon.com/QTEATAK-Momentary-Tactile-Button-Switch/dp/B07VSNN9S2/ref=sr_1_4?crid=2KOMLUI55U0F1&keywords=tactile+button&qid=1655408229&sprefix=tactile+but%2Caps%2C774&sr=8-4

its high voltage convertor

amzom

I don’t get it can you explain it to me

@@andreascolari8493 the batteries are in parallel, this means that the voltage is not stacked. If you have 4 battery and you connect them in series the voltage adds up so you get 6 volt because 1.5v * 4(batteries) = 6v. The configuration in the video has 2 batteries in series (so 3v) and the other two also in series, however the two pares are in parallel so instead of adding 3v to 3v to make 6v they keep the voltage low while providing a higher current. The device is rated for 6v so it is better to use 6v instead of 3v

I'm built different