That is not a 8.1 system. No matter how Many speakers You use, 2, 8, 30, 500, 67890. If the track You reproduced was recording in Stereo 2.0. You only have a Stereo system. A 8.1 is when the track have 8 chanels, 8 chanels with independent info every one, and You put every speaker on a specific place on a 3D space.
На пассивные излучатели нужно приклеить большой лист фанеры, басс будет ещё объёмный и очень глубокий. Попробуй отцентровать и ко всем пассивным излучателям равномерно приклеить лист фанеры. В теории должно работать. Ведь через все каналы течёт давление, соответственно все излучатели будут толкать лист фанеры равномерно. Это как огромный НИЗКОЧАСТОТНЫЙ динамик без корпуса будет толкать воздух. (Надеюсь меня услышат автор этого абалденного и очень креативного видео)
Слушал бы и слушал... Отрывок композиции на 29.50-30.10 вызвал целую гамму чувств: душа затрепетала в унисон с этим воплощением нестандартной акустической мысли, а мозг начал упорно сомневаться в возможности самого существования этого шедевра...
По мне так хрип + гул! при таких размерах думаю надо делать деревянные объёмы с более разнесёнными по частотам динамиками. Сантех больше для мелких поделок.
You need at least passive membranes at the backside to get rid of the air noise and you need two amplifiers after the car radio one for each side to make it really powerful. Nevertheless badass idea and well done!!
Для чего!? Это не для звука! Можно попробывать с пивных банок! Или бутылок! Саб -из ведра под шпаклевку! А вот из труб металлопроката- тяжелее ,зато звук будет, но нужно добавить еше тампоксов и ушных затычек!!🤣🤣🤣
The joining pipes between each speaker tubes mix the sound of speakers together and you won't get the exact sound of each channel. Also the insulation of boxes are poor and will leak the inside sound pressure that make the sound very persecutor. Filling the tubes with cotton will purify the sound and prevent direct touching of inside sound with plastic pipe.
Nên bít các ống kết nối lại để lực giao động của các loa không tác động lên nhau. Công suất mỗi loa khác nhau bạn nên làm phân tần hoặc dùng điện trở cho loa nhỏ. Còn cái loa cộng hưởng mình thấy để từ trong ra đẹp hơn và chắc chắn hơn... Ý tưởng rất thú vị 😊.
Так и я про то же: звучание - супер не в пластике, а в чугуньевых трубах! Звук - полный улет! Особенно - ,,супер басс!😂 Почти, как из толчка( не даром канализацию делали чугуневую!!!😂)
Change the head unit and things will improve try and get a pioneer one as I've had loads with a built in cross over so you can stop lower frequencies say no lower than 80hz to the smaller speakers stops them flapping about and send the rest of the lower frequencies Vs the preouts/sub at the back of the unit and make sure that 12v supply is giving you the correct amount of Watt's to run the amp and head unit correctly
Awesomene project! But subwoofer movement is being interrupted by the batteries and small port... Needs to better that for me, and also the mids are excursionning more than sub!
Not knocking it looks great but one thing I noticed is the subwoofer wasn't flexing like it should at all I think maybe he wired the subwoofer amplifier incorrectly I didn't notice him using the RCA's at all which will be where your sub comes out of and also he should seal the whole thing every Connecting Point every single speaker put some sort of seal on all of it so it's airtight
My friend if you want to listen to sound from the front 2 speakers is all that you need left and right but if you want to hear surround sound the speakers position has to be all around you not in front of you but if you are happy with this well done enjoy it
The air outlet was removed, to bring more power and quality, because without them the sound is very muffled, but the impeccable planning, I never imagined doing it with pvc pipes, I don't know how you can imagine, it opened my mind I usually make it out of wood in the Euclides box style (Brazilian)
Tout simplement magnifique. Mes filles qui me casse les pieds pour une enceinte satellite,je sais quoi faire pour Noël. Merci beaucoup.👍🫶. Vous êtes doué. Au plaisir de voir d autres modèles.Bon courage pour la suite PS: Est il possible que je puisse faire la même chose, mais a 180 degrés, de façon à reproduire un son acoustique a 180 degrés. Merci beaucoup.
No way that it produce 300w rms, did a 300w rms dual mono blocks amp, the transformer was 5kg alone and we almost busted 2x 15" speakers by just the touch of the volume knob. Its a nice experiment thou and cheap to build.
Why did you put the battery inside? But you are using a 12v charger for the mp3 player. this is not rechargeable Bluetooth speaker. need to 12v for mp3 player