DIY Aquarium Top Filter | How to make aquarium Filter at Home 

Very nice design, and this kinda filter works exceptionally better then any traditional filters, but if you attach a valve in the lead of the container it will fix the overflow. Because there will be overflow.

Cool idea but you should definetly swap the inlet and outlet 1. Prevent backflow of dirty water/muck gathered at the bottom of the filter. 2. Allows easy access to mechanical filters for cleaning and replacing 3. The water catchment area at the bottom along with bio media will allow for full nitrogen cycle to take place.

Increíblemente bello y funcional 100%

Very cool I love watching your videos it always gives me ideas .

Pipa masuk airnya lebih baik dari atas, kalau dari bawah airnya kalau mati listrik ke bawah lagi, yang ada media biologis nya kering

I followed your video but water flowing top of cover . Problem is pump speed is more so how to reduce the speed of pump.

cool

Ha água tem que entra por cima pra fazer a filtragem a ordem esta totalmente errado

Bravo, This aquarium filter suitable for how many liters fish tank? (greeting from bangkok,Thailand)

What size is the container?? Please and thank you... 👍

אלוף ד''ש מישראל נהנתי שבאמת הכל בייתי

Which pvc pipe use in this video?? Can you give me amazon buying link please

Bhai iska moter kaha milega

The water inlet should have been the other way around to make it easier to clean

Amazing design you put out so many good videos

Where can I find that container?

What size was your container box ?

how many watts is your submersible pump?

If I extend the length of the outlet pipe, then can I keep it behind the aquarium instead of top? or is it designed to work only on top??

Can you do it for me please?

good luck with cleaning

Ada link penjualan nya ga mase

Bio balls aren't good for sinking in the water.

What sizes of pvc did you use sir?

you have done inmaculate work but the pump can not be inside the tank cause you will have that pump obstructed by the dirty material, pump should be inside the filter pumping the water free of dirty there is no sense to put the pump inside the dirty tank

Kafa motoru kapanınca bütün pisliği geri akvaryuma geri verecektir üzgünüm ama beyhude bir çaba olmuş

the filter media is totally in the wrong order and makes this filter useless

Bang ada shop nya gak nih mau beli kalok ada wkwkwk

Tylko dla krewetki 😢

Baliktad gawa mo! Hose na itim dapat sa taas yan dumadaloy tubig baliktarin mo nalang pag lagay 😂

The inlet of the filter is in the wrong direction, if the power of the pump suddenly interrupts, the accumulated dirt will flow back,

Lost me with the filter pad placement

that will be hard to clean, you have to remove all the medias so you can clean the sponge and wool

don´t mad but, you are forcing the pump if you put the water intake up, the pump will work better

Ciao, in primis complimenti per il fai da te, ma a mio modesto parere è un filtro con una tecnica errata. L'acqua dovrebbe incontrare per primo i materiali a filtrazionne meccanica (tutti e non separati), poi eventuale filtrazione chimica (opzionale) ed infine la filtrazione biologica. Nel tuo progetto hai creato e messo lì a caso, mischiando, meccanica e biologica, a strati, come se fosse un sandwich. Poi, coosa fondamentale, essendoo la vasca del tuo filtro trasparente, non è assolutamente consona ad ospitare materiale filtrante biologico essendo i batteri fotosensibili, quindi lasciando per un attimo perdere le bioballs e quei sassolini, che sono materiali non porosi e poco adatti ad ospitare batteri eterotrofi, ma la luce ucciderebbe quest'ultimi. Scusa poi se sono così prolisso, ma come fai a fare manutenzione senza muovere il materiale biologico filtrante? Perchè lo sai che quello non va smosso. Quindi si, ottimo fai da te sicuramente, ma filtro davvero poco funzionale.

Every time the tape is started tangled I get aggravated lol so ocd and being a plumber doesn’t help either just became a habit making sure it is always flat and even 😂

Paglipatin mo black hose sa taas yan dapat bat ganyan na isip mo mali yan 😂

Boss anong wattage ng water pump ang maganda na malakas din makahigop at the same time ng bigger poops (turtle)? Kasi gagawin ko yung same ng sa inyo na diy canister filter din po..salamat for answering

The layers are all jumbled up. 😅😅😅

Pwersado ang pump sa ganyang setup lalo kung magbabara ang bottom portion

Pano po kung sa taas pina daan yung tubig di po ba matatangal yung takip at dikit nang pipe??

Where is purchase in transparent pipes and fittings.

i WANT TO PURCHASE THIS FILTER, ARE YOU SOLD THIS TYPE OF FILTER?

Catastrophically not durable design. Hot-melt adhesive with water does not work and will fall off unexpectedly, at the most inopportune moment. If the padding polyester and sponges are not too clogged, the pump will no longer be able to lift water into the filter. All dirt will accumulate at the lower level and when you try to remove the filter, it will flow into the aquarium. It is necessary to swap the water inlet and outlet. And this will also add to the height of the water rise. As an idea for making a filter, it’s not bad.

What are those pump called

where I will get it in Pune Maharashtra india

I will probably make like this but I will swap the inlet ang outlet. Thanks for the idea👌

What type of materials you use, is it regular pvc??

Hose*

Awesome idea but i think if the sponge filters get clogged the water will not get through..

Nice

Boss ano tawag sa host

Harika el becerisi

I can see one big drawback of this design. As soon as the pump stops working all the dirt collected at the bottom off filter is going to get sucked back in the tank

Mantab bangg❤, sempet kaget pas di coba, gw kira meledak😂😂😂😂

👏👌

反過來不是更好

I think its much better if the flow was from top to bottom, that way it will be more filtered

Why?

👍👋👋👋

You have no carbon.

👏