DIY Arc Welding Machine - 4pcs Microwave Transformers 

Yes

Where from you get this old transformers

Creative Channel Ok sir

For another project can you use more engines? I’ve wanted to build a motorized trike but if you say this is 18 or older then maybe you could do a no weld video sometime? :D love your videos boss!

nice work

Tobias it’s only 30 volts. His hands were presumably dry, therefore they were at around 100,000Ω; meaning the current running through his hand was

@@bruhmomenthdr7575 you didnt factor in the sweat that he might have on palm? Damn its time bomb before we see funeral of this guy

@Tobias no look again

30 volts is enough you would want to wear gloves with that kind of amperage!

@@bruhmomenthdr7575 People who are electrocuted are electrocuted for doing such operations without protection, in a hurry and thinking they know

How many turns did you do with the 14 gauge wire?

15 turns on each transformer. It still welds great. I have had to resolder at the ground clamp connection 3-4 times because of the solid wire. At the electrode holder I soldered a about a foot of braided copper wire. Will most likely do the same on ground clamp

@@andrewtinch8706 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OsjzLmsR-7o.html

Yo estoy haciendo una cuanto tiempo de soldadura aguanta antes que la dejes enfríar?

Também estou aperfeiçoando a minha ,,acompanha.. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-j2AZ7tH64IU.html

Spikey DaPikey lol, the steel toed flip flops

Chinese Workboots

LMAO

I cringed

Hah, I winced a bit when I saw that. At least he's got a mask on though lol

😂

😂

🤣😂😂😂😂

Ага

same same xD

Crocs are even better, like wearing cages to keep those cherries in lol

My crocs are steel toe

4plus2wj Yeah I had some spots on my feet for a while.

Barefoot fuckers

Laundry Sauce 2 ?

ŮŮŮŮ ŮŮI7

remember kids, Safety Third

Перегорела бы вся проводка

Thank you! They chat too much

Like me

I was just thinking about that.

Mathew Gonzalez yea it’s always ac to dc with a few exceptions with tig

Nevermind it’s not always it’s more like most of the time so it would be safe to say it would work better but at the same time he could pry use more practice welding because I’m sure it would weld fine

FUUULLL BRIDGEE RECTIFAAYAAA!!

Mehdi's people is everywhere wkwk

Mehdi's people is everywhere wkwk

Também estou aperfeiçoando a minha ,,acompanha.. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-j2AZ7tH64IU.html

thats actually incredibly stupid

@@Flowxing Only if you don't have a sound knowledge of electricity

For sure

I thought it was using all the electricity in the house lol

Was waiting for that the whole time......

Tinkering Nerd hopefully before the wires in the wall catch fire 😂😂😂 I'm guessing that thin ass secondary goes first though. It's the only reason he isn't popping the breaker

Tinkering Nerd maybe 30 seconds continously. +-

@Eligio Budde I have made welder using 4 microwave transformers . Now after some time it starts getting really hot. So I ordered a thermocouple relay that sounds a buzzer when it Crosse 65 degree celcius. Is it okay for the transformer to go beyond 65 degree celcius??

i have melted thicker cables and welding with only 2,5mm rod...try making a 30 second continuous bead and see how the wire gets toasty....

sparky Mccormick people are always worried about them spilling out, I have come up with a sealed design so you don't have to worry using PVC pipes acting like a syringe almost with 1 electrode on the bottom and 1 on the handle of the pipe that feeds in and out.. it creates a negative pressure if it's sealed but just have a locking mechanism on the part that slides out basically

sparky Mccormick what 300A? The peak could be up to 1000 you would need either supper beefy diodes or mercury rectifier.

Кристиян Митев mercury rectifiers/ark valves are awesome.. I wanna learn glass blowing and make an octopus ark valve

Я тоже так думаю,идиот он просто!!!

chethan poojary ballamanja He does

chethan Birwa'Z वलडिंग मसिन

Também estou aperfeiçoando a minha ,,acompanha.. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-j2AZ7tH64IU.html

блядь, в таких тапочках жарит!!! ураган!-)

I think you are looking for whats called a spool gun.

@@RandomakerYT Thank you brother for your response. But I have a normal welding machine, with alternating current. Only iron welding ... I want to convert it to a continuous current so that I can weld it with iron, copper and aluminum (as I mentioned earlier in one of your videos). How can I do this in what way ?? Should I put a diode on it ?? What is the best way. Information about the machine we will send (400 watts) and 40 amps (four files). Copper files. Japanese industry. Please reply and thank you for your efforts. God bless you, your follower from Iraq

@@leukemia4821 what you need then is a rectifier. If you search for welding rectifier online you will find many expensive ones you can buy along with lots of diy options.

@@RandomakerYT Thanks a lot. But can you call me one of these welding rectifiers? Now the English language is weak and I do not have knowledge of its names or their form? I would be grateful for your help.

@@leukemia4821 Im not really familiar with them either but I believe something like this might work just make sure you get one that can handle the current.

Toni L it does not matter too much.

If you use them in series then yes because of the frequency it just won't work

Yes! Yes!! Yes!!! And yes!!!! Or dont use same ones and you might burn your flip flops. Jokes aside using the same transformers is mandatory!

I am 17 year old

I have subscribed your channel and watched all videos A to Z

many times building a nice speaker is gonna cost out the ass, especially if you want a nice one.. your gonna want to use neodenyum magnets which would be the most expensive part, putting them together in the right format would be difficult to say the least... it would be possible but alot of hassle, I would do it if I had an assload of money to burn though.. I have some very interesting never before seen designs in my head, but to me just for music it's not worth the effort..

If you can wind up thick enough wire on the core (30-120A)and if you have enough voltage (20-50V) if you connect output in series you could make it work (btw sorry for my english im from Czech republic)

Wow...

when welding you are not short circuiting..

@@MrHBSoftware actually you kinda are

Andrew Morgan arcing is not short circuiting...the current is way lower when arcing...if the elctrode sticks then you are short circuiting and you cannot weld until you unstick the elctrode....short circuit gives you maximum current and often if you have and old style transformer welder with no protection you will completely destroy-melt the electrode if you dont unstick it quickly or turn off the welder...

@@MrHBSoftware I stand corrected. That makes sense!

Som Automotivo Brasil Não

Sim , eu automotiva Brasil, fontes p carregador de bateria

Br sempre

Sempre assisto, o cara é bom.

Som Automotivo "é nois"🇧🇷 🇧🇷

he did, just look around on his channel :)

parvez sandhi horse dance huh...learn how to spell

parvez sandhi he is legend he doesn't need one...

and comes with 2 year warranty