DIY Arrow Storage Building Shed Assembly | Step by Step Guide with Instructions | Start to Finish

Подписаться 67 тыс.

Просмотров 182 тыс.

50% 1

Hello everyone. Thanks for stopping by and we are glad that this video may be of some help to you if you are going to assemble your own shed. This is the Arrow Storage Building Shed that we guide you through from start to finish. If you find this video useful please show your support by liking, sharing, commenting, clicking the bell notification and SUBSCRIBING. I including links to the shed, the updated Milwaukee impact driver that we used for the assembly, and a set of Dewalt MaxFit impact bits and some gloves that would help with the assembly.
👉 Links below are affiliate links. If you buy something through this link I may get a small share of the sale. ❤️
Milwaukee 2553-21 M12 FUEL 1/4 in. Hex Impact Driver Kit with One 2.0 Ah Battery, Charger and Bag
www.amazon.com...
Arrow 10' x 8' Newburgh Eggshell with Coffee Trim Low Gable Electro-Galvanized Steel Storage Shed
www.amazon.com...
DeWalt - DWAMF30 - MAXFIT Steel Driving Bit Set with Sleeve - 30-Piece
www.amazon.com...
Milwaukee 48-22-8722 Performance Work Gloves, Large
www.amazon.com...
#arrowstorage #storageshed #shedassembly

Наука

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 149

@Marcovelii 3 года назад

Installing tomorrow. Drunk watching this will definitely remind me of what to look out for tomorrow!

@andrewspall8702 2 года назад

I am about to build this same shed. Seeing you do it has reduced my stress level and I am looking forward to building it now.

@melquiadescruz Год назад

I just finished the foundation of that same shed when I opened the instructions I was just like RU-vid it is 😂 Thank you!!

@GODWILLWIN8 Год назад

I'm about to make this shed, with my brothers help, and live in it as a temporary shelter. Thanks for the how-to video.

@anthonypeterson5957 Год назад

how did living in it go?

@GinnyRaeHaskin 3 года назад

Thank you I was trying to do this alone with my 14 yr old to help me. We called it a night so I could look it up and try again tomorrow. I really think we can get this knocked out tomorrow. Thank you for the help!

@MasteringMayhem 3 года назад

You’re very welcome. The content on this one was not as good as my other videos but I hope it does help you and your son tomorrow. Let me know how it turns out.

@davegilbertson 2 года назад

Doing this today w my 7 yo son 🤣 thank you for this.

@HumbleHeartMinistry 2 года назад

Been following your video constructing my new shed. Thank the you for making it! Would have no hair left without it!

@MasteringMayhem 2 года назад

You’re very welcome. Glad it helped. It was one of my first videos so a few steps were missing but glad it helped you. Thanks for supporting the channel 🙂✌️❤️

@diarmuidcdc Год назад

Thanks for making the Video and the tips. Currently same shed and size. Though i would like to mention my experience so far in case anyone comes across this video. #1 Definitely need 2 people,#2 Not all holes line up,#3 Yes Pieces are labeled except a few and they were very hard to read on the metal parts. #4 be patient. #5 Wear Gloves they are very thin and sharp.

@pboatner 2 года назад

Great job guys, thanks for the information. I have a shed I need to put together and this has been very helpful

@greghatfieldjr2658 2 года назад

Tried installing one if these today, it was the 10x14 barn style. Never could get the wall panels right, ended up taking it back

@donalddaffern6837 Год назад

you guys are awesome. and I couldn’t put mine together without watching this RU-vid video Thank you very much. Great job on putting the video together.

@jonathansherwood5841 3 года назад

Looks like those Milwaukee tools are doing you right! Appreciate this video, took down our shed and this will be good for future reference when I rebuild the shed.

@Falconofflight 2 года назад

Just bought the same shed, thanks for the video it will help,

@Robert-gq9os 2 года назад

Hey guys great video you really made it look easy to do. It sems like to me I gathered from your video is pick the right day and take your time with each step it doesn't look like a process you can rush as a doing this as d.y.i person.

@jorgemjcastanonjacinto5043 Год назад

It’s nice I bay one but I have a have a little problem but you’re video is helping thanks 🙏

@jenniferabbott5705 2 года назад

So amazing!!! I really appreciate the tips to watch for during construction.🤙

@tsspsycho9751 3 года назад

Had to help my sister build her

@juliomendez3428 3 года назад

Thank you very much for your advice it did help me alot

@marcgovenor4514 3 года назад

Building one of these you didn't mention the sealing tape for roof beams, or maybe older kit and it doesn't use it

@nukestrom5719 3 года назад

With high lumber and sheathing cost I'm more into a metal shed.

@patriciawalker9461 3 года назад

Very Very Informative! Thanks for sharing!👍🏾👍🏾

@steve.culver7023 3 года назад

Very informative. Building mine tomorrow 🤪

@MasteringMayhem 3 года назад

Great! Thanks for watching and I hope the shed turns out well. All the best to you and yours 🙂✌️❤️

@nombr 7 дней назад

Good vid, thanks for posting this! Would an ‘open’ floor/ground cause humidity issues inside the shed with change of seasons?

@Dan-ji4db Год назад

I'm trying to buy this exact one on FB marketplace so this will help if i get one, thanks 🙏🏻

@alexgilmore5285 3 года назад

I'm currently installing one of these for the first time I built a wood frame out of 3 sheets of treated 4ft x 10ft 3/4 in ply wood and 9 10ft 2x6s I had one 2x6 left over but that's in case you have to recut something or want to put in another support for the frame I would wear gloves when handling the sheet metal it is easy to cut your self on the metal it is sharp and you will bleed they way you read the instructions helped me read mine better Wish you would of shown you putting the roof on in more detail but good video

@MasteringMayhem 3 года назад

Thank you. Yes, this was a video that we almost didn’t share because the detail and instructions along with our filming was not good but we decided to put it up in the end. Just not one of our best videos. For watching though and I hope your shed turns out great. 🙂✌️❤️

@taliciousvillage 3 года назад

Thank you for this video! I'm thinking about giving up on contractors and putting it together myself. It's going to take a lot of time but...I'm really willing at this point

@MasteringMayhem 3 года назад

You’re very welcome. Glad this video inspired you a bit. Sorry you have had bad experiences with contractors. Hopefully you won’t ban them permanently, it is tough to find good ones though, at least that’s what I keep hearing. Definitely have a second person with you if possible, that will really help with putting the walls up and the roof on. Let me know if you get it done and how it turned out. Enter my power tool GIVEAWAY if you haven’t already. I hope you and yours are well 🙂✌️❤️

@polydynamix7521 3 года назад

If you can assemble walmart or ikea furniture or a crib from ebay or anything like that then you already possess 90% of the skillset needed. Now you just need a person willing to help you and a way to anchor it to the ground.

@mp8677 3 года назад

Thank you for making this video.

@MasteringMayhem 3 года назад

You’re very welcome 🙂✌️❤️

@bob48219 3 года назад

You might want to mention that you need room all around the shed to work on it. I'd say at least two feet. Some building codes require it.

@MasteringMayhem 3 года назад

Good point. Customer gave us the directions on this one though. If I do another I’ll definitely bring that up.

@bob48219 3 года назад

@@MasteringMayhem Looks like he saw all the screws and nuts and gave up. lol I'm in the process of putting one of these up. I should have watched your vid first.

@MasteringMayhem 3 года назад

@@bob48219 Yeah, my brother and I were talking about that while we were assembling it. Didn’t expect that much hardware for that kind of shed. All the best to you putting it together 🙂

@elizasav1717 Год назад

Thanks for sharing this video, great job!. Could you tell me if the roof and walls protect from heat? If it feels hot inside the shed?

@gabrielv4063 2 года назад

thank you, really needed this!!

@MasteringMayhem 2 года назад

You're very welcome.

@poloaguilar4744 2 года назад

basically you just read the instructions

@graciehowlett8957 Год назад

wish my assembly manual was even remotely close to yours on the initial floor frame assembly! And what is with the holes not lining up?! Thanks for the post

@toodlican 2 года назад

I got two similar. I appreciate the video.

@Lin-zv3hi 2 года назад

How many hrs if you font mind me asking you? And you do need 2 people I'm so glad you said this! Thanks

@MasteringMayhem 2 года назад

It was an 8 hour plus project with two of us.

@alexismariah7631 3 года назад

I tried assembling and sliced my finger and I called it a night. Now watching this video

@akuiori 3 года назад

Got my thumb and wrist...yea...

@haganlong4027 2 года назад

Sheet metal is very dangerous you definitely have to be careful my top would definitely only use your finger tips as I actually build real custom metal buildings. The thinner the metal the more dangerous

@anormalchannel9426 Год назад

I got my toes 💀

@edwardtheracoon1469 Год назад

Same here

@Jimmy-vy5ng 3 месяца назад

Wear gloves and closed toe shoes 👍

@davidbaldwin1591 Год назад

18:40 Rocking that beard!

@williewillteeztorres8502 2 года назад

Excellent Excellent video

@jorgebalcazar192 2 года назад

GREAT JOB GUYS

@raray5880 3 года назад

I bought one but I have to put it together as well....does it come with the floor already

@MasteringMayhem 3 года назад

No floor. We assembled this one on the customers lawn as his floor.

@akuiori 3 года назад

You jumped the roof installstep and how you taped it..

@jerrywilliams1838 Год назад

Thanks guys , good stuff.

@willwright3396 3 года назад

Gig em guys

@carlosbanegas7577 2 года назад

thank you very good

@loqito1972 3 года назад

Great 👍video thank you. I just aak a question If we install floor base have to be after or before ?? Thanks

@alexgilmore5285 3 года назад

Do the floor base first you can do it after but you'd have to jack up the shed and get the floor base underneath I'm currently installing one of these for the first time I built a wood frame out of 3 sheets of treated 4ft x 10ft 3/4 in ply wood and 9 10ft 2x6s I had one 2x6 left over but that's in case you have to recut something or want to put in another support for the frame I would wear gloves when handling the sheet metal it is easy to cut your self on the metal it is sharp and you will bleed after I built the frame I put it on top of cinder blocks one on each corner and on in the middle on both sides definitely a two person project but 3 wouldn't hurt and making sure the frame is square at the bottom and top is important when building the shed

@erdoganessat2505 Год назад

thank you very much great video.

@av01230 3 года назад

Iam just finished installing the floor frame but its not square. Off by 4 inches. The holes aligned well though. Can i continue to assemble the rest ??

@katelynbarber1020 2 года назад

Was your question ever answered?

@nimster64 Год назад

How is it holding up? I don’t have a slab so I have to build it over my grass

@officialrealmantv1 2 года назад

Thanks for the Video , I'm going to assemble this weekend, How long did it take you guys ?

@DJDjayVarela 3 года назад

How did you get the back panel on… does look that you had enough space behind

@MasteringMayhem 3 года назад

It was a tough squeeze…made it work though

@bemsrbelkoc9315 2 года назад

I noticed u did it on grass nice im.not tryna spent more.money on makn a cement base ina try it on grass also

@ursalogdraketh5737 3 года назад

Thanks this is a big help!

@MasteringMayhem 3 года назад

You’re very welcome. Glad I could help in some way. It wasn’t the most complete video but it’s what I could get in the moment. I hope you and yours are well.

@RogerSayers 2 года назад

Howdy Guys, Great video, Thanks for sharing with us. I sure like how you go into detail when it comes to the placement of both Bolts and Screws. I'm getting ready to assemble a bigger 10 X 14 Arrow Shed. The 10 X 10 that you have assembled here is pretty much the same with the exception of size and model. Mine is the Lexington LX10X14 Has the barn look. It's gonna be a challange for me to assemble cause I dont have anyone that I can get to help me. I think I can do it without help if I take one step at a time. So... Anyway thanks again for the video, it will help. Thumbs up on your video, and I've subbed your channel.

@joeyfunk4327 3 года назад

I didn’t know the roof panels were all different so I got to my end piece and it hung over two inches FML

@travisbyles5286 3 года назад

How long would you say it took you to put it together? Also, you think you should level the ground beforehand? One more question, when using the anchors, do you put them in before the shed or after?

@MasteringMayhem 3 года назад

This shed took my brother and I about 7 hours. I recommend leveling the ground if you can but if it’s fairly even already you don’t “HAVE” to do it. Just recommend it if it’s possible. From what I remember we ran the anchors in after the shed assembly was completed. Hope it turns out well for you. Don’t forget to enter my power tool GIVEAWAY. We stream it live every Saturday night @ 9pm CST. 🙂✌️❤️

@weekendworkboots 2 года назад

Awesome build, thanks for the video, very informative.

@sunbladerr Год назад

How did you screw the walls along the back side where the fence is?

@azucenabarraza9814 3 года назад

Where are you located? Do you build these for people? 🙂

@robertbairt928 2 года назад

Need 2' off of fence& Hurricane tie downs Required code where I live but 🤔 4 fence& Grass maint,🤗

@scottdarling1072 3 года назад

The instruction manual for this shed is so pitiful its insane. Thanks for making the video

@MasteringMayhem 3 года назад

I hear you. This job was not easy. You’re welcome.

@homegrownbrews Год назад

u put the back panels up when it was flush against the fence😂

@777sgiles Год назад

How many hours does it take for two people to assemble this shed?

@franciscoguerra8192 2 года назад

Great job. How much should i charge to assemble??

@MasteringMayhem 2 года назад

At least $250.

@nimster64 Год назад

How did you get behind the shed to put the panels up?

@nickchxppa239 2 года назад

CAN YOU SHOW HOW TO DO THE FIRST STEPS I AM STUCK WTF

@itsmerob6120 Год назад

Gracias. Subbed!

@jesusaraujo2784 2 года назад

How much would you charge to make one of these I was asked to build one but I want to be fair on a price

@MasteringMayhem 2 года назад

I would charge $300 to assemble this.

@bruceleehee9267 2 года назад

If u have big fingers. Good luck the the screws

@katelynbarber1020 2 года назад

Do still have page?

@iandtexarkana4549 2 года назад

This shed should be on a concrete or treated wooden foundation, otherwise the floor would be a muddy mess once the rain comes

@galivirl 2 года назад

I agree, but also that depends on climate. It's extremely dry where I live so mud is rarely an issue. Snow on the other hand... 🤔

@joshuanavedo5359 3 года назад

Where are you located? I'm in the Pennsylvania area. I have ran into big troubles trying to install the walls.

@MasteringMayhem 3 года назад

I’m in Texas. Definitely need two people for this assembly.

@advofGio 3 года назад

are you in houston though

@taliciousvillage 3 года назад

So the inside is growing grass? No platform.

@MasteringMayhem 3 года назад

Not sure. I assembled it for a customer. Haven’t seen it since we assembled it. I’m think there’s not much sunlight in there so the grass would be minimal.

@BettyVandeventer-vr9gh Год назад

How do you get the vedio to the start

@pbrooks4040 3 года назад

What are actual dimensions of bottom perimeter frame, please?

@MasteringMayhem 3 года назад

Not sure. It’s been a long time since I did that job for the client. Sorry. 🙂✌️❤️

@chrisackerman1858 2 года назад

how many hours did it take you 2 guys

@lcrazyjeff 2 года назад

Oh man I wonder what issues may come up from no foundation, I guess instant corrosion

@pvm3926 3 года назад

I cant believe you guys don't have on gloves

@Lorn058 2 года назад

My instructions don't have any of these labels thankyou

@danielhubble7629 3 года назад

Roughly what’s the estimated build time?

@MasteringMayhem 3 года назад

Took us both appx. 6 hours.

@MrDbz9001 2 года назад

How much did you charge if you don’t mind me asking ?

@rickbat007 Год назад

I watched to see if I could get tips on final roof and top cap assembly but the video skips from Step 13 to after Step 15 is completed never showing any of that assembly.

@willwright3396 3 года назад

What’s the labor cost to install one?

@MasteringMayhem 3 года назад

About $240.

@freidamartin3281 3 года назад

So should it be put on a cement platform instead of on the ground?

@MasteringMayhem 3 года назад

Yes, highly recommended. I put this one on the ground per customer request.

@kristynedelarosa892 2 года назад

@@MasteringMayhem is it strong enough to not blow away? How is it anchored if it’s on cement?

@DarkTruth1 2 года назад

@@kristynedelarosa892 they sell cement anchors

@godbody4922 Год назад

Where is your floor?

@MrRichiPQ 3 года назад

You show what the next step is then you show when it's done but what about the procces!?

@MasteringMayhem 2 года назад

It was one of my early videos and I was learning a lot then. I missed a few steps. 😔

@henry1343 2 года назад

How does it take to out this together?

@dewayne6570 10 месяцев назад

What?

@danaalanaarynndonald8253 2 года назад

Did anyone add ventilation in their shed?

@wcb22516 3 года назад

How much do you charge for this?

@MasteringMayhem 3 года назад

I no longer assemble those. I charged $300 for that when I did it though. 🙂✌️❤️

@pookiewood 2 года назад

Did everyone skip the sealant step? This is the second video that skipped it. 😂

@MasteringMayhem 2 года назад

No sealant.

@josez1 2 года назад

It will take you 2-3 days to build it by yourself. What a pain.

@onefixitman 2 года назад

My mom's shed doors do not slide that easy. I will look at them. The shed is 20 years old.

@JohnS-gf4sz 10 месяцев назад

Get momma a new shed

@onefixitman 10 месяцев назад

@@JohnS-gf4sz I bought her many things that helped her over the years but she has passed.

@MrSlaidlaw 2 года назад

I got stumped at the door.

@MasteringMayhem 2 года назад

Hope you figured it out in the end 🙂✌️❤️

@eddielawther8675 2 года назад

you also skipped step 11

@SethDavisPiano 4 года назад

Your first mistake is using the instructions. A real man doesn't need 'em. JK :)

@MasteringMayhem 4 года назад

Seth Davis Piano I was told a real man can admit when he doesn’t know something 🙂🤷🏻‍♂️. It was great talking with you the other day.

@mairaveron4778 3 года назад

I do this all the time just to go back and read the instructions 🤣🤣🤦🏻‍♀️

@anubis8086 3 года назад

LOL, I've tried that one many times and ended up reading the manual 🤣🤣🤣

@eddielawther8675 2 года назад

You skipped stage 12

@ryker4124 2 года назад

Garbage sheds an an incredible pain to build. Avoid at all cost.

@anilhari007 2 года назад

Time waste video. only showing book. That is already with the customer.

@cc92873 Год назад

Useless. Too fast and didn’t actually show steps

@javiercarrillo914 3 года назад

Horrible video.

@MasteringMayhem 3 года назад

It was early on. Learned a lot since then.