DIY Assembly Juki DDL-8700 How To Step by Step

Подписаться 9 тыс.

Просмотров 140 тыс.

50% 1

In this one hour DIY video we will show you how to assemble the Juki DDL-8700. We cover step-by-step in 8 sections on how to put the table, stand, motor, and head together. Then we show you the basics of operating the machine. We offer the Juki DDL-8700 in the pieces detailed in this video at www.cutsew.com...
Section One shows the unboxing of the items you receive when ordering your Juki DDL-8700 unassembled from www.cutsew.com. One box contains the Juki machine head and the sewing machine servo motor. The larger box holds the legs, tabletop and other necessary items.
Part Two covers the tools you will need to perform the entire task. We outline the entire list from wrenches to scissors.
The Third segment explains how to put the table and legs together. Every single bolt and nut are shown to lessen the mystery of what goes where. We explain exactly how to connect the braces to the legs so that the machine is structurally sound.
In the Fourth Section, you will see how to mount the servo motor to the table while it is still upside down. The technique of assembling it upsidedown makes for less lifting and faster work.
Part Five details exactly how to connect the operator pedal to the motor so that the machine will sew as expected. Skipping a section like this might leave you with rubbing parts or maybe just a machine that won't run.
Segment Six explains how to properly unbox the Juki DDL 8700 sewing machine head safely and without damage to the product. You also see all the accessories that come inside this box. You may be surprised that this is where the thread stand is kept.
Section Seven of this DIY video will show you step-by-step on how to attach the head to the table. There are quite a few small details that must be executed in a certain order. Critical guards are installed to protect the operator from moving parts.
Eight. In the last portion, we go over the basic operations of your fully assembled sewing machine. We show you how to thread the machine. We also show you how to load the bobbin and adjust the stitch length.
Special Thanks to Royalty Free Music from Bensound

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 167

@Jessica_Valerio 4 года назад

You are a lifesaver. The instructions JUKI sends are pathetic. Bless you.

@shannonthomas89 Год назад

Hahaha you got instructions?

@sue4461 11 месяцев назад

Thank you. I just got my DDL-8700 today and my husband and I were able to put it together with no problems thanks to your video. Thank you again!

@CutSew 11 месяцев назад

Great to hear!

@sabrinasweeney8749 29 дней назад

This was so incredibly helpful. My machine came with zero instructions how to assemble or use different features. Though it took a while, I was able to put it all together with zero mechanical skills.

@yolandadeleon9774 4 года назад

I was looking to buying a Juki but it would be disassembled and you need someone to assemble it for you. So whenever I need help, I always go to RU-vid. I am so happy I came across your video. You are the best instructor, with the help of your partner who took his time to put it together, you made it very easy to try and tackle it myself. Thank you so much!! Keep up the good work.

@carolynbell4720 2 года назад

all I can say is that this is one of the best tutorials I’ve seen. Very layman focused!! Just excellent and thank you!!

@goasfarasyoucansee 21 день назад

Thank you, I have used your video because I was heading out to assemble one, meanwhile I found few things you missed, one is pin that coming up from oil pan for knee pad, and also two rubber pads the black one should go on another side to make machine even, otherwise front is up almost a quarter, also do not nail at the bottom, two on the side is perfect as bottom need cushion. Overall your video would be extremely helpful to all, I have not searched other or watch other as you have enough information to do machine portion, there table come assembled.

@MissDeliana 3 года назад

Just got myself a DL8700, but like someone else said in the comments, the instructions Juki provided weren't great. So thank you for this super detailed and very helpful video!

@CutSew 2 года назад

Thanks for the compliment Sanna. We hope you'll stick with us for more videos.

@dallaskelly7147 3 месяца назад

thank yall so much! I wanted to build my own that way I would know what to do if anything went wrong- and this video is awesome!!

@ThatKoukiZ31 2 года назад

The legs included with my moms machine were quite different, but overall this video was awesome in getting it setup. Thanks for providing such great instructions for all kinds of people.

@CutSew 2 года назад

Yeah, this is, of course, our set up. Depending who you order from, there will be some differences, but we are making the most helpful videos that we can.

@junelilyrose3396 7 месяцев назад

🤓 Lifesaver you are !!. Got my Juki yesterday, fully assembled BUT couldn't make heads or tail of bobbin winder!. 🙏

@jaynemay7536 2 года назад

Thank you so much for providing such excellent step-by-step instructions. My Juki DU-1181N arrived yesterday with no instructions for installation. I had read that everything is the same as installing the DDL 8700 except the fly wheel, so this was extremely helpful. There were some very minor differences (like the type of screws), but this video was excellent! THANK YOU!

@CutSew 2 года назад

Glad we could help.

@juancobenas8662 5 месяцев назад

muchas gracias, me ha servido de mucho su video, saludos desde Perú

@donnatoepfer2502 3 года назад

Thank you - because of your video I was able to assembly my table and machine

@angelabeech4145 2 года назад

Thank you so much! We could not have put my Juki machine together without you. Your step by step was perfect.

@CutSew 2 года назад

Glad I could help!

@thannibal7 4 года назад

Fantastic work! This helped tremendously while building my machine. Thank you!

@veviticushumphrieswallace2546 3 года назад

I TRULY enjoyed watching this! Loved the way you explained every step. You and your assistant are true professionals!

@Clydeshides 10 месяцев назад

Aww man I really can’t wait to put one together that way I can make any future repairs right here at home.

@michaelbeasley4776 2 года назад

Helped me a lot. My table did not have the 5/16 to put in leg/table to adjust forward/back. Had to screw mine to. A lot of the screws are different. The video definitely helped me.

@SewwithCesia 4 месяца назад

THANK YOU SO MUCH!!!! Super super helpful!!

@alizarascon2941 4 года назад

Thank you very good video, God bless you!

@BigRo 4 года назад

this helped SO MUCH while assembling my machine... Thanks :)

@CutSew 4 года назад

Rovell Gaither Great to hear. Let us know if you need anything else.

@euginesanthanasagayammanue3574 3 года назад

Thank you for your information it is very useful. I followed and completed in 6 hours It is working fine. My table was different so I followed different RU-vid Thank you Eugine

@Clydeshides 10 месяцев назад

Cool I finally have a reason to dust off the metric tools. I’m saving up for it!

@nanagyedu3600 Год назад

Thank you very much for this video , the steps are clear to follow. My machine is running good

@robcombs7505 3 года назад

Thanks - The best instructional video I’ve seen

@CutSew 3 года назад

Glad it was helpful!

@douglasrobert130 4 года назад

Very helpful video.. the only thing I did different is was I drilled the holes for light and thread stand before putting the pan and head on. That way you don't get sawdust in the oil pan.

@CutSew 4 года назад

Great tip!

@benjamenlemus 4 года назад

This video is awesome! helped me put my machine together the right way! Thanks guys!

@mimhbo 11 месяцев назад

Thanks guys

@CutSew 11 месяцев назад

Our pleasure!

@cindabishop2722 4 года назад

Thank you! I recently purchased the DDL-8100 and couldn't find any assembly instruction - then someone told me that its essentially the same machine as the DDL 8700 and I found this video to be incredibly helpful!

@CutSew 4 года назад

You are welcome!

@Iammiraclemathis 4 года назад

I’m confused on what screw was used to mount the legs to the table. Was it the ones with the hexagonal head???

@CoachKarter215 4 года назад

I’m not sure to height bolts are long enough

@justinshupp8652 6 месяцев назад

Thank you thank you!!!!

@loupgris6373 3 года назад

Thanks for your SUPERB vidéo. I can't wait to get my machine. Great work. It seems so simple when you show and explain. I feel confident I can do it too. God bless you all !

@CutSew 3 года назад

Glad it was helpful!

@energiixclusives709 3 года назад

You guys are absolutely incredible. Though there were a couple parts I got stuck on like which screws to use with what, your video is the reason I assembled everything properly. Thank you, thank you, thank you!!!!

@tufajjolhasan3525 2 года назад

Thanks

@akalavelli Год назад

This video was very helpful, it was easy to follow and to understand! Thank you!

@christytay9423 4 года назад

Thank you for making this video. It helped to set up machine without making any mistake. 👍👍👍

@IdrissFulani 4 месяца назад

Wow this is very good 🎉🎉🎉🎉🎉

@doriskandagor3622 2 года назад

Thank you for this incredible video. I will assemble mine tomorrow .

@CutSew 2 года назад

Glad it helped

@annmin9242 4 года назад

Thanks for the video instruction!The only one which is awesome and clear

@CutSew 4 года назад

Glad it helped!

@mohammedfuseinafuseina5083 Год назад

Good mashing

@nattannazaire 2 года назад

Thanks works like a champ

@CutSew 2 года назад

Glad it helped!

@lynnecarville1 2 года назад

THANK YOU!!!! That was superb.

@CutSew 2 года назад

Glad you enjoyed it!

@vinajuliana8766 4 года назад

Thank you for your tutorial to assembly the yarn:) I get so confused to use big yarn the size is 20/3. When i use it, it can't work properly. Soon i will try small yarn..

@MegaBatula 2 года назад

You are so helpful thank u so much

@CutSew 2 года назад

You are so welcome!

@8machines62 2 месяца назад

I want mine assembled!

@b-motion 2 года назад

Thanks for the video. I am assembling a juke 8700 but I didn't find the hand wheel screws in the box, can you tell me which number is it, so I can find out how to get it?

@teresawheat8966 Год назад

Awesome instructions

@kogabear1 Год назад

Great video. Doesn’t look to bad to assemble. Only one thing, a “lock” washer always goes to the nut, it serves no purpose on the bolt head side.

@genevievestdenis6770 3 года назад

Thank you so much, you may have saved our marriage. 🙏😁

@CutSew 3 года назад

Ha! We do what we can

@S0nLuc4 2 года назад

Thank you so much for this excellent video!!!

@CutSew 2 года назад

You're very welcome!

@waqarahmed7262 4 года назад

I like it very nic

@jillsilverstein5638 2 года назад

Wonderful video

@cheresemallen5404 4 года назад

You guys are awesome!!! Thank you for sharing this!!! 🤩

@CutSew 4 года назад

Thanks for watching!

@omarbareejo778 2 года назад

Wow good 👍

@johnsmall4318 3 года назад

Superb video. If I buy one it will be from you. Thanks

@PennyinVA 4 года назад

Thank you for this- incredibly helpful. Loved the tool list;)

@CutSew 4 года назад

Glad it was helpful!

@mehwishsaba5531 3 года назад

Please can you tell me how to fix thread stuck in bobbin and needle is broken.

@CutSew 3 года назад

I'll try to make a video. Can you send me a picture, so I can see how you did it?

@moniquelagace2587 Год назад

Merci pour votre tuto, cela m'a été vraiment utile, vous travaillez bien 💙

@motihawladar1135 4 года назад

thank u

@DasiaRoseCollection 9 месяцев назад

I believe my fuse is blown do you know where I can get a new one ? Do you have a video on replacing it?

@mdirshad643 4 года назад

You are the best

@abbyoyediran5730 3 года назад

I cannot thank you enough for this tutorial. Lifesaver. I would have been so lost. You were so patient and set a good pace in your explanations. God bless you and your team. However, I am still struggling with the knee pad because my machine came with the motor already attached to the table. so I am lost on where to attach the knee press/ Also mine did not come with the light fixture. Do I need to buy it?

@CutSew 2 года назад

Sorry for the slow response, but we don't sell them with the motor atttached. You can buy the light from us though!

@jeffmcclain1924 4 месяца назад

Help, my table top didn't have any of these holes for table legs or motor where can I get this table top to go with the hardware

@Yellowredbone Год назад

Please help me that short tiny black screw popped off my ddl8700. But i can't figure out where it came from

@Lolsme_mil 3 месяца назад

What accessories does the Juki come with? Or does it all have to be ordered separately? Thank you

@karenjenkins3431 4 года назад

Great video. I wish I came across this before putting my machine together. I am having trouble tightening my belt. The higher the top screw on the motor is the looser the belt. How do I tighten the belt? Also the belt guard makes rumbling noise when I press on the foot petal.

@CutSew 4 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4WkjA-GmfxY.html About 6:14 in shows how to attach the belt

@kristinmcfarland5018 29 дней назад

The only comment I have is I wish it was a little more detailed as which screws went where. Most of pretty self explanatory but others…not so much when you got to the machine

@randyfernando4442 3 года назад

Thanks for this very informative video! I’m thinking of getting a new sewing machine. Is this the procedure for Juki 5550 N?

@CutSew 3 года назад

Yes, it is!

@jagilo9677 2 года назад

I love the CUBA 🇨🇺 baseball cap the tech is wearing.

@elizabethavalos2847 Год назад

Does this apply as well to take one apart for transport? How difficult is it to disassemble? (Not completely but enough to fit in a car)

@ItsBonitaElizabeth Год назад

Hello, what do you put the nails? What would happen if you do not put the nails

@sam-co1oo Год назад

i can't get thes screws to tighten down for the cover . ! so frustrated. they just spin and spin like there's nothing to screw into

@mariefritz1 2 года назад

I bought my Juki off Amazon. They sent me a 39 belt it seems to be too big I can't get it to have tension no matter what. Do I need a 38????

@karenramnath9993 Год назад

I just bought a 38 and it seems to fit well. I had a 40 before, and I had to adjust the swing-span of the motor all the way out.

@MsAlex1717 3 года назад

Can anyone tell me what the little metal piece with the cork is for?

@Lola-385 2 месяца назад

lol did you ever find out? I been looking at so many videos trying to find out what it is for. No one says 😂 Update: after some googling… metal pieces are motor brush replacements and the cork thing is brake pad replacement for the motor.

@macelo1017 2 года назад

I got one part that’s metal And cork I can’t figure out where it goes

@faafetainunu598 2 года назад

Showing how the bolt display you are doing it to fast

@jennyperson3217 4 года назад

This is pretty much the same for the 1181n correct? Mine just arrived today & this is by far the best video I have found. :)

@CutSew 4 года назад

Pretty much the same

@patriciamirgorod313 3 года назад

The belt doesn’t move when I move the Hand-wheel Pulley. I did try tightening the motor but the Belt still doesn’t tense

@annleona5801 2 года назад

Nice video where can One get such motor

@CutSew 2 года назад

www.cutsew.com/Electronic-Servo-Motor-High-speed-3450-RPM-110v-with-Speed-Control_p_6716.html

@landurose8600 3 года назад

Maybe you can help me. My sewing machine is going in the wrong direction after assembly. I don’t know how to fix it. Thank you.

@CutSew 2 года назад

Landu, I appologize for the slow response. Did you fix it? I've gotta ask my tech about this one!

@karenramnath9993 Год назад

If it’s a clutch motor, sometimes there is a switch to make them run in forward or reverse

@barbaradanko9603 2 года назад

Hello can you tell me how long the table is?Thank you

@DrStephanieMillerWilliams 4 года назад

Where were you guys last week??? 😊

@CutSew 4 года назад

Filming this video unfortunately. Stay tuned. We're going to keep creating new videos!

@francinedevriese3128 4 года назад

Great video!! I have a trouble with a juki DDL 5530 but I perhaps this DDL 8700 works the same way. I think the knob to adjust the stitch length is broken or disrupted. When sewing forward the stitches are very small but when sewing in reverse the stitches have a normal length. Can I manually adjust the stitch length again?

@CutSew 4 года назад

It should

@francinedevriese3128 4 года назад

@@CutSew Yes thank you. But how can I manually adjust the stitch length when the knob does nothing anymore?

@gaylepatterson8127 2 месяца назад

I still can't fix my tension on the bottom.

@Lola-385 2 месяца назад

I had issues with the tension from the belt. I had to buy a smaller belt. Mine came with a 39”. A 38” is a better fit for mine. Mine kept rubbing on the cover guard things.

@jaganpanigrahy1853 4 года назад

👍thanks

@CutSew 4 года назад

Welcome 👍

@GeneralInformationYoutube 3 года назад

Is there a way to remove the thread guide from the top. Mine popped and I need to replace it

@CutSew 3 года назад

there's quite a few, but it's probably just pushed in there and held with friction, so just pull it out.

@ginolarrosa 4 года назад

Budget Juki - Free We were given by a friend a JUKI DDL-8700-7 Comes with a computer that is said not to be working (JUKI CP-160) When the power switch to the machine is turned on the CP-160 turns on and everything seems to look ok. But when I push on the pedal nothing runs. It does not show any error display or code to work with. With your experience I was hoping for any advise as to where or what I should try?

@CutSew 4 года назад

I'll get with our mechanics & see what they say.

@primewavez 2 года назад

Dear Good informative video Sorry but 👇 your technician have poor technical knowledge. Ex He hole in table when installation is almost done Why not hole before installing Head.

@rhyxhebryone2526 2 года назад

Need your help guys.. anybody here heard about JUKI MO1016 ?? it supposed to be an Overlock machine from Juki (Japan) but i cant find any detail of it from Juki website/ youtube or even from google.. nothing at all.. it seems that it doest exist? I am plannig to purchase used unit.. as i cant afford to buy a new one. And this is the one that i found in Market place.. but im afraid that i will not find any parts of it if something happend. And cant even find any instruction.. please help me guys..did juki stopped the production of it? Hows the part?will i able to find parts incase?🥺

@CutSew 2 года назад

Looked into it. Cannot find it.

@sivajikilani6291 3 года назад

Hello dear cutsew how much price juki ddl8700

@mykalimba 3 года назад

Is the motor a JUKI part, or is it third party? If the latter, how can Juki warranty the machine when the motor isn't theirs?

@CutSew 3 года назад

The Juki warranty is for manufacturer defects on the Juki head only.

@mykalimba 3 года назад

@@CutSew Thank you the response. It seems like this arrangement creates a grey area where Juki could claim that the machine head was damaged because of the motor, and maybe refuse warranty coverage. That's scary from a consumer's viewpoint, but I guess that's how these machines have been sold forever? Does Juki even make their own servo motor that a customer can purchase optionally?

@Iammiraclemathis 4 года назад

I’m so confused on which screws you used to mount the legs to the table was it the hexagonal head screws ?? Please help!

@CutSew 4 года назад

It is the 5/16x 1” bolt with flat and lock washer.

@CoachKarter215 4 года назад

How do u get the bolt with x on head into the underside of table to attach legs

@sam-co1oo Год назад

my table top doesn't have any holes for the legs to attach....>