DIY Audiophile music Streamer for a Dac with Flagship HIFI parts from Ian Canada upgraded Part 2

Подписаться 28 тыс.

Просмотров 21 тыс.

50% 1

High-end Stereo audiophile Streamer for your Dac Easy Build no soldering required. Using the latest flagship parts from Ian Canada.
Parts used in this Build
IFI Power supply 5V: amzn.to/3lFTW3q
Spike Set: amzn.to/3BPOhMM
Batteries 18650 3.2v ( make sure it is Lifepo4 3.2V not 3.7V)
See Below at the end
Ian Canada: github.com/ian...
(scroll down the link to find and download the order form and view all the parts. Make sure to check the pdf document of each part for detailed specs and manual )
1. HdmiPi Pro (17B)
2. FifoPi Q7 (1D)
3. PurePi (48A)
4. MonitorPi (49A)
5. Acrylic cap (51A)
6. 2X 2.5mmx11mm metal standoffs lot of 4 sets (12B)
7.Uc conditioner UcConditioner 3.3V (26A)
Other Parts needed
Ultracapacitors are Maxwell 2.7V 325F Model # BCAP0325 P270 S19
www.mouser.ca/...
Optional
8) Accusilicon AS318-B-45.1584MHZ
9)Accusilicon AS318-B-49.152MHZ
or
10) CCHD 957 from Mouser with CCHD957adapterKIT (9A) from IanCanada
tedious soldering of tiny smd caps is involved must have lots of soldering experience
45.1584
www.mouser.ca/...
49.152
www.mouser.ca/...
Canadian Amazon links
Spike Set: amzn.to/45rE8Dt
IFI Power supply 5V: amzn.to/3BPaJG3
World 2nd best Dac D11 I have built : • World's second Best DI...
Amazing Streamer I built : • Amazing audiophile DIY...
Diy Audio Thread: www.diyaudio.c...
18650 3.2v ( make sure it is Lifepo4 3.2V not 3.7V)
A good Quality lithiumwerks batteries:
lithiumwerksba...
Or Generic Ones from Aliexpress if you can not get the good ones
www.aliexpress...

Хобби

Опубликовано:

7 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 114

@pocket5s1 Год назад

now all we need is a pcb/kit that minimizes/removes unnecessary components so it is all one unit. Love this series!

@Thoughtflux Год назад

I have a cchd957 on a cheap Chinese DDC with a xmos chip which feeds via coax into my Bifrost (OG). I power it with a linear power supply. I can't tell you how blown i was the first time i heard it. It's so impressive that i have put off buying a new dac for quite some time now. Clocks make a massive difference to the sound. I will be doing your diy streamer as my next project. That's the right way forward! Thank you for amazing videos :)

@Gabster1 Год назад

The cchd957 is my favorite so far without going too crazy expensive and complicated specially with a good dedicated power. Gglad to hear I am not the only one, also it depends on the rest of your system and taste. Have fun building. There is also joy in the process and ownership of your DIY project.

@nadeembrossard8687 Год назад

Thanks a lot for the update exactly what I have been looking for. It is a lot easier to follow a video tutorial it helps take the fear away and truly understand how to connect things together

@michelboivin4396 Год назад

I am hoping you will continue this serie with an other video about a case. Thanks

@OliverDomscheit Год назад

I just built this version and it sounds fantastic. Cannot wait to add a DAC on top. Thanks alot for this series.

@Gabster1 Год назад

Thank you for sharing your Experience with us

@lorenz0000 Год назад

Thank you so much for the idea, inspiration and instructions. First DIY project up and running!

@DennisMonds Год назад

Thanks for the video Gabby. I'm finding this a very educational series. Keep them coming!

@michaelj.4187 Год назад

sending love and peace to everyone...

@thinkIndependent2024 Год назад

Nice Build , but if it's all about accurate clocking and low noise I found A Mini PC and modified a DC to DC converter and got the ripple with everything 1 millivolts rms on my scope and with USB no real clock issues because of asynchronous communication. This board beat the PI & Tinker in elimination of over all in and DC ripple or other noise ( so there other ways) DAC,Mini PC,Power under $200😅

@kellyanderson7115 Год назад

I listened to the 2023 "London Brew" album on Tidal last night. It's a very interesting album. I guess you might call it Fusion Jazz. It's a well mixed album with a very interesting combination of instruments (piano/tuba/sax/clarinet/electric guitar and others). I might consider it a great demo album for testing/showing off a sound system. An album like this really highlights the advantages of having a top-notch streamer. Of course the rest of the system needs to be good too.

@meagain419 Год назад

I really do like this series but I have to say Gabi, I really do hope you add a DAC to it. I'm sure I am going to to build this streamer at the end of this series. Keep up the good stuf!

@Gabster1 Год назад

It is coming in the near future :) still exploring some options.

@ehickert Год назад

Hello Gabby, great channel and great videos! Thank you! I am going to build this streamer exactly as you suggested it. Will be very interesting to see how the project turns out. I am starting a audio based blog and plan to write an article on the build and resulting performance. Thank you! Eric

@Gabster1 11 месяцев назад

Thank you Eric Please share your blog I would love to read it when it is ready.

@ehickert 10 месяцев назад

For sure will share! We can look at sharing some of your videos on the blog as I think it will have good traction. Cheers@@Gabster1

@d.w.96318 Год назад

Waiting on a tutorial on installing one of the Roon read OS. Thanks!

@kurt120032002 7 месяцев назад

I love the "please observe safety measures". People who ever seen what a big capacitor can do will handle them as a live bomb, while the the rest are "yes, yes, sure the usual be safe b.s." 😂 for those never handle a big capacitor, I melted a screwdriver while discharging one, and I don't mean a litlle bit of damage, I mean 2-3 mm solid steal literally melted. Before that I used a tack from a measuring device an 1 cm not just melted, but literally evaporated, so we are talking very serious injury if you don't treat them with the proper respect to a big capacitor when charged.

@OurTravel-g5l Месяц назад

@Gabster1 - thank you for your incredibly informative videos. Thanks to your encouragement, I completed the Ian Canada streamer project with SC Pure Clocks, and it sounds better to me than the Eversolo DMP 6 with an LPS upgrade. I am using Ropieee with the Raspberry Pi generic I2S output to the Holo Audio DAC. However, the generic I2S from Ropieee is only giving me 192kHz. I am using a dedicated HQPlayer and would like to output at a higher rate. Is there a way to configure the Ian Canada streamer to output DSD1024 and PCM 1.536MHz output? Thank you once again for supporting the audio enthusiast community.

@henrigrotkamp Год назад

I would love to see a build with just a dac. I don't need the streamer, but would love to use the ultracapacitors as a powersupply for a dac that is isolated from my pc to drive headphones.

@Gabster1 Год назад

It is coming in the near future :) still exploring some options. also see my D11 dac for Ideas

@giorgost515 5 месяцев назад

Thank you for the detailed instructions! Just build it sounds good with my rockna i2s dac! Any suggestions for enclosure ? Thank you again!

@fearwolfbrewery5014 Год назад

Next step would be to use a transformer and two LinearPi (5v and 3.3v). In that way you can get everything in one box and not need a linear power supply.

@furiososso Год назад

Great stuff! Thanks

@VenkataMaheswaraReddyKarnati 9 месяцев назад

Thanks Gaby!!! For me this video was the first spot to look at audio DIY.... In this build if we plan to add both HdmiPi Pro & TRANSPORTPI AES cards, how will the clock cable (grey one) connection need to be managed from Q7 for clocking ? I am missing the option to have both so could you please clarify on this. thanks in advance.

@Ken-vv3os Год назад

Do a video on how to improve/upgrade a pi2aes

@behruzbasla4137 Год назад

Fantastic Video series Gaby, Ian should’ve done it eon’s ago. I personally need more confidence before I plonk US$700. Some comparative tests would be great, also please describe the SQ. Is there an audible uptick in SQ when paired with your Terminator dac (not sure which version you have).

@OgnjanKralj Год назад

Thank you, Gaby, excellent video (Part 1 & Part 2). Please clarify that the Uc conditioner is #26A. UcConditioner 3.3V (Universal) and ultracapacitors are Maxwell 2.7V 325F 1.6 mOhm Ultracapacitors Model # BCAP0325 P270 S19 (as shown in the video). Question: Why do we use 2.7V Ultracapacitors on a 3.2V battery power supply system?

@Gabster1 Год назад

Yes that is correct as of now they do not make 3.3v ultra capacitors actually you would need a 4V for safety margin so has to use 2in series capacitance drops in half and voltage rating doubles you also need a balancer Uc conditioner to avoid one going over 2.7 hope that helps I updated the description with links :)

@karimzaoui5251 Год назад

Hi Gabby, great work you are doing. I have some questions: Can I volume control this flagship streamer via remote control....In using this streamer over the Aes board as a preamp to my activated loudspeakers. The digital input signal of our diy dsp adau1452 controlled hypex ncore amps is the burrbrown 1794 dac in NOS (mono) mode... Or would you prefer the ess9038 dac modul of IAN and going analog to our amps. Thanks a lot Karim from Germany

@Gabster1 Год назад

You can not control the Volume but some streaming software let you do that but at sound quality cost Your Dac is nice and great but to reach the next level you would need to get a good Analog AMP Preamp but it will get costly the ess9038 dac module of IAN with ess controller let you adj the volume but I always find a good preamp does a better job and sounds better so I would keep the Dac at max and adj with the preamp. Try turning all DSP and processing off any auto volume leveling and see if it sounds better Hope that helps.

@butchwillard55 Год назад

Gabby. Simply love your videos. Thank you. Did you happen to measure the height of your souped up streamer? Can’t wait to view your streamer/DAC combo?

@Gabster1 Год назад

Thank you You can put the ultra capacitors on the side to save height space

@michel8166 Год назад

hello gabster, i also want to apply this but i see on the reclocker XO1 and XO2 with something like 45 mhz and 49 mhz. the ACCUSILICON clocks do have a value, but the standard clocks do not. how do I know where the standard clocks should go if I want to put them back. thank you in advance

@Gabster1 Год назад

You can swap the clock positioning no problem as long as you have 2 clock families 45,49 But pay attention to pin 1 dot need to be on pin 1 of the socket

@spda242 Год назад

After viewing the last video I looked at the items available from Ian Canada. If I understand IanC also has a solution to turn this into a streaming/headphone amp. Improving this with a box and screen for album artwork would be nice

@Gabster1 Год назад

i will be adding those in a future video

@wilfredroettger5906 Год назад

Great videos. What about a NAA with USB in and I2S out (DSD512)? Is it possible with this kind of components?

@thecanadianace Год назад

What would be a nice lil dac to go along with this ? I’m looking into doing my first diy dac

@dfels Год назад

This is a great series! Thanks for posting. I am curious, based on your comments towards the end, if the clock on the streamer matters very much if you already have a good DAC. I assume that most DACs re-clock the incoming digital stream. If that’s the case, am I correct that the main value of your design is the stable power supply (to reduce noise)? I assume that jitter will be ironed out (or added) by the DAC at the analog conversion step. PS- I have a topping D90, which sounds great to my ears, streaming directly from my computer, but I have never compared it to anything else.

@Gabster1 Год назад

Correct to get the full benefit of good clocks find a DAC that does not re-clock the incoming digital stream or adj the setting to bypass them if possible.

@Silentracerone Год назад

Hello Gaby, i was wondering if i can use my Hifiberry Dac2Hd board instead of the hdmi version that you are using..? Love the channel and builds. Grtz Filip

@Silentracerone Год назад

Would also like to connect a screen for a “Now playing” feature if can manage to build this…

@tiree2231 Год назад

Thanks for this great content I own a dac with I2S in. Why do I need a HDMI board for I2S ? Doesn’t the FIFOPi Board have I2S as well? I use I2S now. Out of a micromedia Dante board build into my dac connected to a Mac as streamer. Would a raspberry Pi be a better choice?

@Gabster1 Год назад

Thank you 🙏 The I2s in the board is for very short distance between circuits the I2s via hdmi is for a bit longer

@stephanespohr886 9 месяцев назад

Hi Gabby, excellent video and extremely valuable inputs for coming projects of mine ! Currently very happily using the BNC output of an Allo Digione Signature mounted on USBridge itself battery supplied but interested to try the I2S input of my Audio-GD R27-RE (R2R) DAC. If you don't mind question concerning the clock frequencies : if I understand well they should be multiple of 22.5792 and 24.5760MHz for resp. playing multiple of 44.1 and 48 kHz streams. Is the final applied clock frequency relevant for the sound quality ? For example IAN CANADA's SC-PURE clocks can also be purchased with resp. 45.1584 and 49.1520 MHz. Thanks beforehand and good continuation !

@Gabster1 9 месяцев назад

Sound Quality is about the same on some clocks lower frequencies may sound better But very debatable I personally prefer Ian’s 45/49 combo also they support higher sampling rate then the 22/24 version Hope that helps

@stephanespohr886 9 месяцев назад

@@Gabster1Hi Gabi, thanks so much for your quick answer. I will probably follow your advice. Just to know & learn would 22/24 MHz clocks be sufficient up to 176/192K resolution ? Btw I also observed my Audio-gd DAC working with 90/98 MHz ones. Today I also watched your "Amazing Dac Streamer" video based on an USBridge I will probably upgrade mines on a similar way, using FifoPi7 + HdmiPiPro modules (instead of DigiOne Signature) with decent power supplies. Congratulation for your work !

@ronnyskaar3737 7 месяцев назад

Really great. Does the streamer need the network cable, or can it receive wifi?

@Gabster1 7 месяцев назад

it will work on wifi but more reliable with a network cable unless you router is near

@ronnyskaar3737 7 месяцев назад

@@Gabster1 Thanks.

@ccshell 11 месяцев назад

Hi Gabby. I have just bought all the parts after watching your videos. Ive gone with the transport AES instead of the HDMI. I am now looking for an alu case that fits - if you know to one, please let me know

@Gabster1 11 месяцев назад

Start with a wood plank when you are happy with everything and it is working, lay it down and figure out what size case you need. lots of choices at mouser or Ebay some are basic cases but you can dress them up with a wood piece.

@ccshell 10 месяцев назад

@@Gabster1 Regards the electrical cable you used, what size was it? I bought some 22 AWG solid core red and black and its too thin. I want the same gauge as you're using.

@Gabster1 10 месяцев назад

@@ccshell 22 is way too small try 16 or 14 I use silver plated wire from Ebay they are very good Quality ebay.us/qe5eor get a few different gages between 17 and 13

@jacobpaternostro9109 Месяц назад

Is it possible to buy the clocks from Ian Canada to create an external clock only? I already have an off the shelf streamer and DAC but would like an external clock to add. Thanks.

@Gabster1 Месяц назад

They are bare clocks but if your clocks are 3.3v and you can take them out you could solder them in place but for a Quick answer I would say no

@ptp29 Год назад

Thank you Gaby, great video. Do you need to cancel or bend pin one on both clocks for the fifopi Q7?

@Gabster1 Год назад

Yes you do on some clocks

@stephenwells5570 Год назад

I love the content. I just have a question, I have not heard you mention any digital input hats like Ian's receiver PI. I would like to do this build, But I need some digital inputs.

@Gabster1 Год назад

Ian has a couple Input bords that work very well also he is about to release a new one I believe. checkout his GitHub link and scroll down

@stephenwells5570 Год назад

I bought one. It is not supported by volumio. I was trying to find someone online who can give some insight into what it is compatible with.@@Gabster1

@semassimoponzio7251 9 месяцев назад

Please Mr Gabster, sorry to bother u, but I'd like to know using Volumio OS on Rasperry PI 4 model B 8 Giga which interface I should select due to I have bought Ian Canada Transport ultra low jitter S/PDIF? There a lot f interface but missing Ian Canada product. No sound without slecting interface for I2S DAC(settled ON - (Select DAC model: ????). Second question possible to use Crystal oscillator on FiFoPi Q7 at 90.138 MHz and an addition one at 98.340 MHz? Thanks in advance for your kind support

@jungtarcph Год назад

yayyy

@Lmosby1 9 месяцев назад

Hello Gabby, i am currently using a FifoPiMa with my Rpi 4. Do i need to cancel pin 1 if i upgrade the stock clocks with accusilicon clocks.

@giacomorossi7634 11 месяцев назад

Thanks for the great video, I've a question: my DAC doesn't accept HDMI input, can I use a TransportPi MKII for coaxial output instead of HdmiPi Pro? If not, what I can use in place of (or in addition to) the HdmiPi Pro?

@Gabster1 11 месяцев назад

Yes you can or slightly better the transport pi AES

@ronfreeman4687 6 месяцев назад

Has anyone ever figured out how to purchase items from Iancanada. I've spent a few hours trying. Computer dude I'm sure, but marketing guru NOT. I'm not sure what to do. Hope Gabby helps out I suppose.

@digbybrooks4866 Год назад

Hi. I have an Audiolab M DAC Plus. Am I right in thinking this would re-clock the signal, meaning there is little point in me building this?

@92558131 11 месяцев назад

@Gabster, any idea as to why the power light of the hdmi pro does not turn on? I am having a hard time with the build, as I cannot get the streamer to output via hdmi.

@rickg8015 Год назад

Hello Sir.. Does Ian Canada have a Board with USB Output? Is there a more enclosed type of case? It is quite dusty where I live, it will be hard to clean the streamer in an open type acryclic case..

@Brighamdoc Год назад

I'm just ordering this to build next week. How do I ensure that my equipment chain uses the superior clocks? I hate to show my ignorance but I want to see if I hear the difference. I'll be feeding the signal into a new Gustard R26.

@Gabster1 Год назад

R26 is a very nice Dac Not a 100% sure but you need to disable OS (over sampling) and it may bypass the clocks hard to tell. Also try putting the ref Clock to external see manual

@Brighamdoc Год назад

@@Gabster1 Thanks so much! I'll let you know.

@De132an Год назад

I have a Pontus 2 dac and am curious would you expect based on what you here from the Terminator, would you think upsampling would sound better, more accurate, than NOS? Thank you for your thoughts.

@Gabster1 Год назад

I can not hear a difference but in general the less processing the better.

@De132an Год назад

@@Gabster1Thank you, Sir!

@ducefichnix Год назад

Hi, thank you for your fine building tips. Is there any good reason to use the ifi supply with the UCconditioner? Shouldn‘t any decent switching supply work with same result noise wise?

@Gabster1 Год назад

2 parts 1) for the rpi it is getting constant power despite the ultra capacitors that filter noise you are still getting some 2) for the fifo pi that is using batteries and disconnect Most likely yes but with very noisy power supplies the noise can transmit by proximity I demonstrated that in one of my d11 builds I believe the power supply one.

@joonyahny Год назад

I also use Q7 but did not bend the pin1 on the clock. Can you tell me why it needs to be done? And this cancelling pin1, does it need to be done in both clocks?

@dornauge1995 Год назад

also really curious about this, im using TransportPi Digi and havent bend the pin on my accusilicon clock

@dornauge1995 Год назад

Oh, the manual adresses this atleast for the Q3 and TransportPi Digi the manual clearly states that clocks with "OE" pin are supported!

@masamunexc 7 месяцев назад

Two questions please, why are the batteries necessary? If my current external DAC has usb inputs, can i use the usb outs from the rasp pi for that? Would this make the re-clocker pointless if I did that?

@Gabster1 6 месяцев назад

Raspberry pi usb is very noisy Batteries are great power for The reclocking board

@92558131 Год назад

Helll Gabster, does the shielding and grounding videos also apply to this construction ?

@Gabster1 Год назад

Yes they do at least try connecting a ground wire to the metal Pi case

@fermino Год назад

Thank you gabs, im a total noob in this, currently I use a Rpi 3 to stream roon to my dac, Can I follow this give to use the usb output? or I need to change the HdmiPi Pro for another part?

@Gabster1 Год назад

You could use a transport pi AES and steam via coax or optical unless your Dac accepts I2S Usb is not recommended with this system

@captfoong 9 месяцев назад

Is it poss to build the streamer & dac altogether in one unit?

@kellyhart3622 Год назад

The accusilicon clocks have different values, does it matter which clock you put where, and do you disable pin 1 on both clocks?

@kellyhart3622 Год назад

I saw a comment that said the board would support the accusilicons with pin 1 installed so I tried it and it sounds great. I can't tell for sure if it is better than before the upgrade but I think it does! Both versions definitely sound better than the raspberry pi streamer I built before as I can A/B them. The one thing that does NOT sound better are my DSF (DSD) files, they play but instead of saying they are DSD, they say they are 192 PCM files and have a background hiss. I have a Topping D90LE DAC. My other raspberry pi streamer is using a pi 4 and has a USB out.

@kellyanderson7115 Год назад

Hey Gabby, Where did you source your ultra-caps? So far I don't find any sources for new parts, just used parts from ebay. It sounds like Ian is going to come up with a next generation uc-conditioner that uses more recent parts.

@Gabster1 Год назад

I added the mouser links for the Ultracaps in the description :)

@audiolife5038 10 месяцев назад

Does anyone know the total height with the super capacitors on (in cm). I am looking for an acrylic box to put on top of it for protection. my acrylic box is is 20x20x20 cm.. Will it do gabby or someone else who knows?

@Gabster1 10 месяцев назад

Depends on the boards and shields used mine just under 20cm you can also put the UltraCaps on the side

@audiolife5038 10 месяцев назад

@@Gabster1 thanks mate!

@swiftshiftcourier8667 Год назад

Hi, my DAC is a heavilly modded Ayon Sigma which was optimized for USB audio. It does not have i2s and USB sounds better than AES/EBU. Any ideas for building a streamer focused on USB that would better my USBridge Signature?

@Gabster1 Год назад

I am not a big fan of usb but some people love them can not help you as I never tried any solutions with this type of streamer there may be boards that will work but I think you may loose the advantages of this platform then again not my area of expertise.

@ahlbergmagnus 10 месяцев назад

Is using LinearPi with UcConditioner inferior to using PurePi and UcConditioner?

@Gabster1 10 месяцев назад

If I would to rank I would say Ultra Capacitors with UCpure, PurePi and UcConditioner, LinearPi or Lifepo4 with UcConditioner, Linear Pi hope that helps

@ahlbergmagnus 10 месяцев назад

@@Gabster1 Yes, that helps. Thanks! I feel somewhat reluctant to go with the big ultra caps because of cost and safety. Not used to that stuff. But I guess I will go with PurePi with UcC instead of LinearPi and UcC then.

@ahlbergmagnus 10 месяцев назад

@@Gabster1 I do have a follow up question if you do not mind. Using the big ultra caps take a lot of space so I am wonering if there are places where they are not critical soundwise? I was thinking they should not be necessary for the RaspberryPi. Are clean power critical on the "dirty" side of Q7 (5V) or is it sufficent to use them only on the clean side (3.3V)?

@killebrewje Год назад

Anyone know where I can find the batteries for this? He says 3.7v at first then he says 3.2v. So is it 18650 3.2v?

@Gabster1 Год назад

Try AliExpress hard to find C$12.44 31％ Off | Lifepo4 18650 3.2V 1800mah Rechargeable Battery Cell Brand New Long Cycle Life For Power Tool Home Appliance Solar System a.aliexpress.com/_mLJFozs

@stoicar Год назад

Terminator is not a nos dac

@paddle_shift Год назад

Don't understand around 8:50 or so you say "you put the second clock in" and then at 8:58 the clock is no longer in the shot and actually is on the table. What's going on?

@Gabster1 Год назад

I had a Accusilicon in one and a Crystek in the other one so I can compare the 2 but usually you would put to the same brand

@paddle_shift Год назад

@@Gabster1 you compare them by leaving it in, not removing it and leaving it on the table. You clearly inserted it at 8:50 and then at 8:58 it is on the table.

@Gabster1 Год назад

@@paddle_shift I had to look at the video to see what you mean you are correct. I shot the video as I was testing different clocks many times including a small hard to see Crystek 5 series and the clips are not in proper order. Good observation a error on my part, but the idea is the same nothing will work without the clocks.

@paddle_shift Год назад

@@Gabster1 Thank you kindly, i thought i was losing my mind.

@mikeiver Год назад

This is a nice throw together project from parts off the web. The problem I have is the same with all audio fool stuff. Adding super caps and low thermal EMF connectors and fancy wires is not going to make it sound any better in a double blind random test of modified and unmodified kit. Even if you have access to a couple hundred thousand dollars of calibrated lab equipment with 7.5 digits of accuracy you you will still not capture any appreciable difference in signal. You will get more benefit from simply adding in some good bypass caps at the critical chips than with this exercise. This is like adding engraving to your gun and then claiming that it is more accurate because of the weight distribution shift in the weapon. It's about bragging, not .00001% distortion or femptosecond jitter improvement or any other such nonsense.