Тёмный
No video :(

DIY Bass Traps: Home Studio Room Acoustics 

Todd Audio
Подписаться 3,3 тыс.
Просмотров 510 тыс.
50% 1

I've spent the past few weekends working on DIY room acoustics. The first part I knocked out was bass traps. This method was influenced by many of the knowledgeable room acoustic professionals I've learned from online, most notably Ethan Winer.
I chose to use Roxul Safe N' Sound because it is very effective and seems less messy than other insulation alternatives. You can purchase Roxul Safe N' Sound at Lowes, but most stores only carry the 16" width batts. However, you can order 24" from their website, and if you buy 3 or more packages you get free shipping to your local Lowes store.
I wanted to build mine in such a way that the insulation would fill the whole corner, but they could be stacked up without building anything into the walls. After some trial and error, this is the most cost effective and efficient way I came up with for what I wanted. I shot some video while building one of them and put together this tutorial.
Remember to investigate your room for any obstacles or obstructions, and to measure the distance from your floor to ceiling. I recommend going with 8 layers of Roxul per section, and possibly one section with fewer layers on each corner to accommodate your ceiling height.
~ Music Credits ~
Song 1: Jazzhar - Friends
Song 2: Alec's Band - Young Adult Friction
Song 3: Daniel Veesey - Beethoven's Sonata No. 13 in E Flat Major
Song 4: Revolution Void - Line of Flight

Опубликовано:

 

15 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 620   
@scottdotjazzman
@scottdotjazzman 6 лет назад
Protip: For fabric other than fleece, such as burlap or muslin, don't tack the fabric at the corners first. Tack it across the center instead, then work towards the corners. This will make sure you don't have any bunching along the edges while maintaining a clean surface.
@dglassb
@dglassb 4 года назад
this guy is really good but 1.5 playback speed is a must
@majorlaser4801
@majorlaser4801 4 года назад
i had it on 1.5 as my default but it still seemed too slow!
@abduhridho
@abduhridho 4 года назад
1.25 is sweet spot for me
@homeofstone62
@homeofstone62 4 года назад
1.5 is perfect, thank u
@Jaburu
@Jaburu 4 года назад
I use 1.5 on normal guys. but this guy becomes normal at 1.5 lol. So 2.0 is best
@HandbrakeBiscuit
@HandbrakeBiscuit 4 года назад
I'm watching at 0.25 because I'm a slow learner...
@necrodogs
@necrodogs 4 года назад
You really want to cover the invisible sides of the trap as well. And just maybe arrange for an air gap behind them. I found that the gaps actually helps a lot. The trap won't go lower in frequency but it will attenuate more in the frequency range it covers. Thanks for the video, almost 4 years after the fact :)
@LooseOrangeJuice
@LooseOrangeJuice 2 года назад
I think they actually will attenuate lower frequencies, depending on how large the gap is. At least that what I found when researching this topic. Either way, a gap is definitely advisable because you're effectively allowing the air to permeate into an open space, before rebounding back into the trap. This is better than if the insulation is flush against the wall, in which case you're only getting the benefit of reduced pressure at the boundary, not the benefit of reduced velocity at that area as well, which you do get when there's a gap.
@petethegreekre
@petethegreekre 3 года назад
If you're not a champion at cutting wood with a table saw or any circular type saw, get them pre-cut. Those things will come back and bite you unexpectedly! Also I would highly recommend leaving an air gap between the trap and wall. Same goes for acoustic panels. Works a lot better at swallowing the bass. Not criticizing your great work, just giving some tips. Good work, happy listening.
@skullsworn9194
@skullsworn9194 3 года назад
how thick of an air gap would you recommend? 2 inches?
@petethegreekre
@petethegreekre 3 года назад
@@skullsworn9194 No more than the actual size of your panel. Example: If a panel is 100mm (4") than the air gap behind the panel should not exceed 100mm(4"). Here's a YT link to a guy who studied this stuff. ru-vid.com/show-UC57auUfJlTvIvW79pom_i1g
@shellyquest007
@shellyquest007 4 года назад
Thanks Homie... years later you're my hero!! :)
@ToddAudio
@ToddAudio 4 года назад
No problem! Thanks for watching!
@robbabcock_
@robbabcock_ 7 лет назад
Nice work! Ethan is indeed an amazing resource and a very friendly and helpful guy. He's forgotten more about acoustics than a lot of his competitors know.
@ToddAudio
@ToddAudio 7 лет назад
Thank you! Agreed! I've seen many of his forum posts and articles. He also has some interesting videos on his RU-vid channel, including one I really liked where he shows his home theater acoustic setup! I appreciate the feedback, and have a good week!
@kurtfoster3640
@kurtfoster3640 5 лет назад
Ethan is a charlatan who's ONLY involvement in audio has been hawking ugly absorbents to an uneducated client base. he didn't even know what diffusion is until i mentioned it to him. then he was all over it. anytime someone name drops Ethan's name i know they are idiots.
@studiosingyourstyle
@studiosingyourstyle Год назад
The stackable part is straight genius! I just prepared tonight to build one in the corner so I didn’t need to move it. I’m changing directions after watching this.
@studiosingyourstyle
@studiosingyourstyle Год назад
Hey, do you know how people hang the floating panels from the wall? Like what is the hardware I’ve been searching for a few days. Home Depot and Lowe’s workers don’t really have any ideas.
@studiosingyourstyle
@studiosingyourstyle Год назад
I’m wondering why some people will do bass traps all the way from the floor up to the ceiling? Do you know what the benefit would be taking a beast trap all the way up to the ceiling?
@nikkomorgan
@nikkomorgan 4 года назад
One of the best videos on this subject I've found yet.
@ToddAudio
@ToddAudio 4 года назад
Thank you!
@DeAdler_13
@DeAdler_13 6 лет назад
dude was smokin some of that wool
@travis.gooden
@travis.gooden 3 года назад
@@laurabrown6073 An even better idea is 4 ft thick Bass Trap curtains. Grandma won't be able to open them but that's fine.
@spudpud-T67
@spudpud-T67 3 месяца назад
duuude
@alexrichardson6461
@alexrichardson6461 6 лет назад
Alex / Australia Thank you so much for your video. I had just bought some expensive (for me) speakers, but was disappointed with the result. However, I built your traps to only halfway up the ceiling for domestic reasons, and then packed them with some spare limp fiberglass wool I had, to the density roughly near your rock-wool. The sound is now superb!!!!!!! Lovely firm bass and such beautiful detail in the music. And video is so much fun to watch too. Good on you Todd.
@ToddAudio
@ToddAudio 6 лет назад
Thank you Alex! I'm so glad to hear they worked out for you! It is amazing what something like this can do to clean up the sound and make a nice set of speakers really shine!
@Johnws26
@Johnws26 7 месяцев назад
"For domestic reasons"... I laughed!
@motionhouse2522
@motionhouse2522 Год назад
Thanks for the tut, fairly in-depth. But for the love of Larry, pls demo safe shop practices: wear a dust/fibre mask and long sleeves when handling rockwall, never ever ever ever reach over a table saw while cutting (!), and while your at it, put some wood or foam padding on a concrete floor to kneel on. My aged back and knees are still recovering after watching that segment. Plus, as someone also pointed out, an air gap = to depth of material is likely to improve acoustic performance. That said, those are fairly nice looking bass traps and the stackable approach is pure bueno :)
@Kecky0
@Kecky0 3 года назад
Thanks for the help. Easiest follow along I have seen. Snapped together like legos.
@petethegreekre
@petethegreekre 3 года назад
Thanks a lot. You've solved my 45 degree question for the 2 outer corners and the inner corner. Now I'm set.
@shamanbeartwo3819
@shamanbeartwo3819 5 лет назад
I work with rockwool a lot in my garden and I would strongly suggest wearing a mask and gloves. Yeah, yeah, yeah, we are all tough guys and don't need no stinking saw guards or masks but that first time I used rockwool without gloves, I spent the rest of the night with hands that felt like they were full of tiny splinters. Make sure if you do make your own panels that you wrap the wool completely on all sides especially if you have children, old folks, or pets in the home. Dear Todd - I love that you use something other than the standard red or black fabric that every panel seems to be made with.
@ToddAudio
@ToddAudio 5 лет назад
Thanks so much for the feedback! Haha I enjoy the variety I guess. I don't have a ton of space in the room I'm in now either so the lighter panels make it feel more open. Have a good night!
@marcohowardvalencia1644
@marcohowardvalencia1644 4 года назад
No one is too manly for PPE
@monkified1989
@monkified1989 7 лет назад
Please be careful when using a table saw without the guide. You did a good job at telling people to be careful, however this is one of the most dangerous ways to use the tool. Great bass trap! I may do this pretty soon.
@ToddAudio
@ToddAudio 7 лет назад
Thank you and great advice! I appreciate the consideration and reiteration because you can never be too careful!
@cavebeastdemon3631
@cavebeastdemon3631 6 лет назад
Yah, you should have gotten a miter gauge with your table saw. Free handing wood one a table saw will result in wood being thrown at you at the speed of a bullet. Take it from a person with practical experience!
@davidmckee5659
@davidmckee5659 6 лет назад
Todd, I dont subscribe to many channels, but I did to yours. First let me say you have some really great DIY ideas for the small home studio and they have helped me in constructing my own. Second, your positive and respectful delivery in the content just makes you a class act. Thank you Sir!
@ToddAudio
@ToddAudio 6 лет назад
Thanks a million David! I really appreciate you taking the time to send this message and let me know! I enjoy running the channel and sharing the advice. It is amazing how much you can do to improve a home studio workflow or make it more efficient.
@alexrichardson6461
@alexrichardson6461 6 лет назад
agree 100%
@PatrickPease
@PatrickPease 3 года назад
I don't like his voice but i also love his voice. Vocal fry, slow, but so chill and kind sounding Don't change anything
@fescolfaro
@fescolfaro 3 года назад
The table saw is the number one finger chopper of all wood working equipment, bar none.
@robertmedina3982
@robertmedina3982 2 года назад
Great video… I found nothing wrong in this video and the narrating was spot on.
@ToddAudio
@ToddAudio 2 года назад
Thank you!
@GlassicGamer
@GlassicGamer 7 лет назад
Great tutorial! If you use fiberglass screen mesh around the whole thing it will get rid of the lumpyness on the front and keep the insulation in the back from coming out.
@ToddAudio
@ToddAudio 7 лет назад
+Glassic Gamer great tip! And thank you!
@mechamania
@mechamania 6 лет назад
You should totally name this channel "Toddio." Rad vid: excellent design and tips, and great design. Just subscribed, with notifications. Thanks! Love the jazz in the background, too.
@ToddAudio
@ToddAudio 6 лет назад
haha I might do that one day! Right now I like having "Audio" in the name so it makes it clear for people have haven't found it yet. Thanks for the suggestion! People call me Toddio sometimes. Maybe in one intro I can experiment with saying "Heyyyy, it's Toddio with Todd Audio!" Very much appreciate the subscribe and comments. Thank you for stopping by and hope you enjoy the videos!
@AlicesWondereland
@AlicesWondereland 5 лет назад
hahaha I had the same thought!
@roman2011
@roman2011 4 года назад
Thanks for the vid. I wish there was a before and after test for acoustic performance so we all can appreciate the difference.
@heppy881
@heppy881 4 года назад
Found that really useful. Will use this design myself. Thanks from the UK. Subscribed.
@ToddAudio
@ToddAudio 4 года назад
Thank you! Glad you found it helpful! The stackable design was worthwhile for me because I've already switched rooms twice and they are still good as new!
@barrrybarrry
@barrrybarrry 2 года назад
Nice one. I'll make one myself after seeing your video. One tip is using a Dacron fabric before the finishing fabric. It will make it look smoother.
@ToddAudio
@ToddAudio 2 года назад
That's a good idea! Thanks! Just make sure it is a breathable fabric. A rule of thumb is you should be able to cover your eyes and still see light through it.
@DavidCastoExperience
@DavidCastoExperience 6 лет назад
Great idea creating stacks brotha I was about to build permanents but this won me over thanks for shedding some light
@ToddAudio
@ToddAudio 6 лет назад
+David Casto No problem. Glad the video was helpful! I have already moved mine to another room once without any problems.
@NKWTI
@NKWTI 2 года назад
I still have a foldable vocal mobile booth from years and years ago that Ethan made with his company RealTraps and it is so excellent for voice over in a semi-treated or even untreated room, but do a little work yourself and then throw this booth into the mix = clean vocals to mix. Wonderful products.
@DopeRedtv
@DopeRedtv 8 лет назад
Todd you are so crafty and good with your hands! A real mans man!!
@ToddAudio
@ToddAudio 8 лет назад
Haha thank you DopeRed tv!
@JakePlus
@JakePlus 5 лет назад
thank you so much! very detailed tutorial, seriously one of the best I've seen for acoustic panels on yt 👏🏻👌🏻
@laurabrown6073
@laurabrown6073 3 года назад
One of the Best Ideas of SoundProofing is "SoundProof Curtains" it actually Block outside Noise coming from Windows. Check Here: livesoundproof.com/best-soundproof-curtains/
@JacksonCarson
@JacksonCarson 7 месяцев назад
An old friend cut his fingers off using a saw wrong. He said his first thought was "what will my mother think?" and his next thought was, "will I ever be able to play piano again?" and his third thought was, "owwwch!!!" He managed to make a modified saxophone work with his remaining two fingers, at least.
@mutemathisawesome
@mutemathisawesome 2 года назад
These are the ones I’m gonna build. Thanks bro. This is the detail I needed.
@laserfloyd
@laserfloyd 2 года назад
Thanks for the video. I'll have to employ this style for my builds.
@thijs199
@thijs199 4 года назад
People talking about the way you talk but I have to compliment you on your sound quality. It sound amazing in there. I'm just hanging up some panels against reverb though, it just takes sooooo much insulation to fill up such a large volume.
@nickthomas89
@nickthomas89 6 лет назад
Todd, that was awesome! Thanks for sharing your knowledge!
@ToddAudio
@ToddAudio 6 лет назад
No problem Nick! Thank you, and hope you found the video helpful!
@chewieone1064
@chewieone1064 5 лет назад
Nice tutorial! I think i may build a couple of those, but i would wrap the 3 sides in foil before attaching the fabric. (Agree on those safety concerns many people have here, i have been a carpenter myself, and a finger may be cut badly much quicker than you can react. Though that little saw you are using is unlikely to kick back. You gotta be more careful when using real powerful machines though.)
@TheHirade
@TheHirade 7 лет назад
did you smoke fine stuff that you sound soooooooo relaxed?
@ToddAudio
@ToddAudio 7 лет назад
hahaha nope I didn't, I'm just a relaxed guy I guess. Thanks for watching!
@juergens4169
@juergens4169 7 лет назад
That slow talking is not too bad, because it makes it easier to understand for non native americans. I got every word.
@TheHirade
@TheHirade 7 лет назад
juergen s, : agree
@pillmuncher67
@pillmuncher67 6 лет назад
Just listening to him gave me the munchies.
@shamanbeartwo3819
@shamanbeartwo3819 5 лет назад
@@juergens4169 lol, that slow talking makes it hard for us northerners in the U.S. to understand:))
@christopherkent3294
@christopherkent3294 6 лет назад
holy crap! never cut anything on a table saw like that!!! super dangerous. Ive been a carpenter for over 20 years and I would never even think of cutting anything like that. That could bind on the saw and pull your hand right into the saw. Other than that, good vid!
@ToddAudio
@ToddAudio 6 лет назад
+Christopher Kent haha thank you! Yes I have had several comments warning of this. I might add more precautions to the description about what to do different from what I did when using th saw. Thanks!
@christopherkent3294
@christopherkent3294 6 лет назад
Might be a good idea. Didn't want to post a negative on your video, just made me nervous. I'm building a small practice room/recording studio. Thanks for the vid!
@LifeOnHoth
@LifeOnHoth 6 лет назад
:D - and as a carpenter for 20 years, you have never done this? hundreds of times maybe? :). Of course it's not the safe way to use a table saw - but there are limits to how super careful you need to be. Sometimes it is just more practical to saw things freehand. Every carpenter knows this :). No use denying that :D But you gotta be very aware of what you do when freehand sawing like this, and from what I can see in the video, mr. Todd Audio have no problems with this. But hey, safety police are always lurking around these kinda videos hehe. Don't get me wrong - it is not safe, but it most certainly isn't as dangerous as many want it to be. From the way he handles the saw and wood, there is no chance that things just fly off in the wrong direction out of control. It might bite a bit, but not out of control. best regards from a long time furniture maker that also knows his way around table saws.
@christopherkent3294
@christopherkent3294 6 лет назад
No, I dont do this!!! That is what band saws, routers, etc, are for. Use the right tool for the job. When I started in carpentry, I had a boss that would have kicked my ass if I did this...and now, I would never let any of my employees do this!!!! Very stupid and very dangerous. DON'T DO IT! I dont want anyone to think in any way this is something they should try or might get away with. This is how you loose fingers. Ive seen some very bloody injuries on the job site from guys who "didnt like to listen". Ask any REAL wood worker or carpenter, they will tel you the same.
@peterh7575
@peterh7575 5 лет назад
it's totally fine to do use the table saw like this. if you don't care about your appendages.
@jaytyranus
@jaytyranus 6 лет назад
Hey man, thanks for taking the time to make this tutorial. I learned a lot!
@ToddAudio
@ToddAudio 6 лет назад
No problem!
@laurabrown6073
@laurabrown6073 3 года назад
One of the Best Ideas of SoundProofing is "SoundProof Curtains" it actually Block outside Noise coming from Windows. Check Here: livesoundproof.com/best-soundproof-curtains/
@ianaintsaying1625
@ianaintsaying1625 6 лет назад
An electric bread knife works REALLY well for cutting the insulation.
@russchadwell
@russchadwell 4 года назад
Good to know! I've been wondering what to use.
@UDoIt2
@UDoIt2 7 лет назад
I'm working on a music studio for my son now. I ripped all of the walls out so I can insulate the walls to sound proof as much as I can. I'll be putting all of this on my channel. I will let you know when I'm done and after I build these traps you document. I just subbed.
@ToddAudio
@ToddAudio 7 лет назад
That's awesome, I bet he will be super excited! Roxul Safe n' Sound is a good choice for soundproofing as well. Have you thought about leaving the drywall off after insulating and just covering it with fabric so you still get the absorption in the room to cancel out the reverberations? Although, the room would probably be really dead sounding.. except that could be a good thing for home recording depending out the setup and what he is doing. Thanks for letting me know you will be building these. Awesome to hear when something I posted helps someone else out! I look forward to checking out your studio videos on your channel!
@TMERUNNR
@TMERUNNR 2 года назад
Great Video!! Thank you for making it. Not an easy to make them, thank you for taking the time!!👍
@ToddAudio
@ToddAudio 2 года назад
No problem! Glad it was helpful.. Thanks for watching!
@BigL3Z
@BigL3Z 7 лет назад
The whole time you were talking all I could hear was a stoned Chris Griffin
@patmcgregor
@patmcgregor 6 лет назад
Really? I was thinking Walt Jr. from breaking bad
@marcottavi2655
@marcottavi2655 5 лет назад
Yeah man !!!!!thanks !
@tuckercameron7536
@tuckercameron7536 5 лет назад
@@patmcgregor "My... Name... Is... Walter Jr.!"
@Buzzer9000
@Buzzer9000 5 лет назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nmYi5u9BhtI.html
@gio5700
@gio5700 4 года назад
true!!!!!!!!
@toddmccown
@toddmccown 5 лет назад
Nice job dude. gonna make some pretty soon.
@kirklinkinney1968
@kirklinkinney1968 5 лет назад
Nicely done. I appreciate how simple you kept things. It's a good idea for those on a budget and listen for "listening" purpose - just enjoyment of the source. :)
@ToddAudio
@ToddAudio 5 лет назад
I agree! Thanks for stopping by!
@willb1157
@willb1157 3 года назад
LACONIC! Fantastically Laconic, I approve.
@ToddAudio
@ToddAudio 2 года назад
Thank you!
@sirroger1066
@sirroger1066 5 лет назад
Thanks Todd, You made everything easy, cheaper and it took care of my bass problem, thumps up
@ToddAudio
@ToddAudio 5 лет назад
Great to hear! Thank you. One person commented recently that people have had even more success by putting a layer of craft paper on the front. It should help reflect some of the higher freqs to keep the room sound a bit more live and apparently also helps flex and absorb the really low end a little better. Im pretty happy with it already but it is worth a try I think. Easy mod for the price of craft paper.. and easy to remove if I don't like it. Haha thought I'd share the tip. If you end up trying it first and have any luck let me know! Thanks!
@sirroger1066
@sirroger1066 5 лет назад
Hi yes part of the fun is to tweak and test when you are DIY kind of person. so I will definitely test the craft paper. By the way, you have this fantastic dialect, were in the states do you come from? Me, well I am from Sweden, Stockholm
@54ringo
@54ringo 7 лет назад
thank you. I plan on building these for my drum room. Nicely done video easily understood.
@ToddAudio
@ToddAudio 7 лет назад
Thank you! They will likely be a huge help getting clean recordings of drums. If your room is currently untreated, this can really help tighten things up.
@antonioestrada8216
@antonioestrada8216 4 года назад
DUDE!!!! Awesome Video bro im building my bass traps now based off this. Thanks again for all the tips !
@ToddAudio
@ToddAudio 4 года назад
Great to hear man! Let me know how it works out!
@ramsaybolton9099
@ramsaybolton9099 3 года назад
Hey, how did the traps work out?
@raymondharris7226
@raymondharris7226 5 лет назад
Awesome Work, Please Keep up the awesome projects and videos your doing.
@ToddAudio
@ToddAudio 5 лет назад
Thank you! I plan on getting going again with another push for more videos soon!
@dearlittlefoxxx
@dearlittlefoxxx 6 лет назад
the best video about diy triangle corner bass traps! thanks
@ToddAudio
@ToddAudio 6 лет назад
+Fokushi no problem and thank you for your feedback!
@Narsufin
@Narsufin 5 лет назад
Great video, thanks for the design advice. Just what I need for my room.
@Schnagelkott
@Schnagelkott 4 года назад
Pro tip: Don't google real traps at work without an adult content filter.
@6884
@6884 4 года назад
y i k e s
@1337murk
@1337murk 4 года назад
I was wondering what could be so bad in that google search so I tried. I had to get 7 PAGES through google until I saw what you were talking about. Until that point, it was all bass traps, real traps vs gik, etc. The fact I had to get 7 pages to see what you obviously got on the first page, maybe says something about the content you watch online?
@alfr_ruiz
@alfr_ruiz 3 года назад
@@1337murk hahaaa
@MitsurgyS
@MitsurgyS 3 года назад
@@1337murk SHOULD I CALL U
@SpeakerBuilder
@SpeakerBuilder 3 года назад
OMG, ALWAYS use a guide when cutting wood on a table saw, NEVER, NEVER, NEVER run the material through the saw with two hands as shown here, as the blade can catch the wood and kick it back in your face, causing serious injury, standard practice is to use the miter guide that comes with every table saw, and sets in the grooves of the table, using such a guide will assure a square cut (assuming the guide is set square), and assures no kickback. For cuts along the long length of material, use the fence also provided with every table saw. Other than that, I really like the idea of building triangle shaped frames for bass traps and then just stacking them, may do that myself in place of my wall mounted traps that don't work that well, the other advantage of this design is the deeper level of material that helps trap the low frequencies, great idea.
@vadimkogan473
@vadimkogan473 3 года назад
He was very close to finished his guitar career forever:)
@afonsoserro4437
@afonsoserro4437 7 лет назад
alright alright alrightt
@goatneck
@goatneck 7 лет назад
lol.. why doesn't anyone get this reference?
@freecitymoneyphoenixknowdg3252
giggity giggity
@AdamSpade
@AdamSpade 6 лет назад
haha
@limitlesshardware8713
@limitlesshardware8713 4 года назад
that's what your mama said ;D
@laurabrown6073
@laurabrown6073 3 года назад
One of the Best Ideas of SoundProofing is "SoundProof Curtains" it actually Block outside Noise coming from Windows. Check Here: livesoundproof.com/best-soundproof-curtains/
@DanZ905
@DanZ905 5 лет назад
Amazing! Thanks for taking the time to make such an in depth tutorial :)
@spaceploit8484
@spaceploit8484 Год назад
Whats the approx density of your Roxul filling? Im trying to find an alternative material because we dont have it around here. Also, do you think porous polyurethane foams could be used for this? Density is about 3 lbs per cubic feet. Thanks
@czeital
@czeital 3 года назад
good but now really confused on whether I need / don't need an airgap and if I do the best way to achieve it with limited space thanks
@nickthom1991
@nickthom1991 2 года назад
Great video, cheers
@CharlieMayMusic
@CharlieMayMusic 2 года назад
Great stuff man! Looking to do something like this for the corners in my new studio
@Kineticartist
@Kineticartist 6 лет назад
excellent tutorial!
@ToddAudio
@ToddAudio 6 лет назад
Thank you!
@lewisamoroso510
@lewisamoroso510 7 лет назад
Pretty sure this is the best bass trap video! thanks a lot will help with my uni project loads :)
@lewisamoroso510
@lewisamoroso510 7 лет назад
Also if anyone here can tell me if this type o bass trap is a Velocity bass trap ( porous/ broadband absorber?) Thanks
@ToddAudio
@ToddAudio 7 лет назад
+Lewis Amoroso hello, thank you! Yes it is porous and broad band. It will absorb a broad range of frequencies and not just bass, unless you were to make modifications to reflect higher frequencies, which I haven't tried myself. In my experience they tighten up the bass a great deal and also deaden the room sound.. some people prefer a dead room for mixing while others still like some reflections.
@ToddAudio
@ToddAudio 7 лет назад
+Lewis Amoroso If you look up "super chunk bass trap" this is pretty much it!
@lewisamoroso510
@lewisamoroso510 7 лет назад
Thank you so much! Subbed for any future videos!
@pauljohn5584
@pauljohn5584 6 лет назад
If he did smoke some fine stuff then I like this video even more than I thought I did. Seriously though, looks great and thank you for sharing
@ErimlRGG
@ErimlRGG 4 года назад
I would have used spray paint between each layer of the fiber just to be sure that when you move it or if it falls they don't get misaligned. I know they probably have a good grip between them because of the material but i don't think it hurts being safe
@haramaschabrasir8662
@haramaschabrasir8662 4 года назад
Very informative and inspirational, I'll do it exactly the same, greetings from Germany
@Itsyaboy88
@Itsyaboy88 6 лет назад
what a rad dude. You can probably do a rad Gump impression- JENNAY! thank you so much for this man, going to do this weekend.
@ToddAudio
@ToddAudio 6 лет назад
+morrissey man hahaha thank you! Glad ypu liked the video and hope the bass traps are coming along!
@cantstopmike311
@cantstopmike311 7 лет назад
Great vids man, hope your channel grows!
@ToddAudio
@ToddAudio 7 лет назад
Thank you Michael! I really hope so too haha. I appreciate your feedback. I'm actually working on picking and planning the next video currently.
@emnigmamachine
@emnigmamachine 6 лет назад
Like the fabric on your panels!
@ToddAudio
@ToddAudio 6 лет назад
+eggfooyuong thank you!
@coryfischer136
@coryfischer136 6 лет назад
what kind did you use?
@ToddAudio
@ToddAudio 6 лет назад
Fleece
@garyshirinian
@garyshirinian 3 года назад
Thx for sharing. How well do they work . Thx again
@marcpanther7924
@marcpanther7924 4 года назад
Hi. If the bass vibrations are coming from neighbors above, will the bass trap placed in my room help to dampen the vibrations too?
@bokchoiman
@bokchoiman 4 года назад
I too, would like to know the answer to this
@ViktorNova
@ViktorNova 3 года назад
Awesome guide
@Psalmistjamel246
@Psalmistjamel246 5 лет назад
Great Video Bro
@ToddAudio
@ToddAudio 5 лет назад
Thank you!
@jimyounger9490
@jimyounger9490 4 года назад
Don’t let em beat ya up too bad. Though there are much better ways to cut lumber , you did remove the fence , greatly reducing chances of binding. But next time use a miter saw.
@ToddAudio
@ToddAudio 4 года назад
Thanks. I didn't have a miter saw but can see where it would help if big enough to cut the traingles. With what I have I did make sure to keep the blade only as high as needed and bought a brand new blade specifically for this purpose. Just in case anything did happen I made sure there was a safe path to pull the plug and the first thought on my mind was me being consious of where my hands are and if anything goes wrong to get away and unplug. I obviously didn't realize there would be this many concerns but I might be able to add a warning tag or something to pop up in the video. I'll have to check RU-vid's current features to make sure I still can.
@vzpon.
@vzpon. 3 года назад
Super tutorial, thank you!
@boboutelama5748
@boboutelama5748 5 лет назад
Is it possible to use hemp wool instead of rockwool ?
@oldmanfredrik
@oldmanfredrik 7 лет назад
Great video!
@ToddAudio
@ToddAudio 7 лет назад
+Freddy theS Thank you!
@gloomtube420
@gloomtube420 6 лет назад
awesome job! really informative, in-depth instruction & relaxing voice over. thanks a ton!
@ToddAudio
@ToddAudio 6 лет назад
Thank you! Glad you liked the video and I appreciate the feedback!
@jasperdrift3856
@jasperdrift3856 3 года назад
Good tutorial mate thanks
@duongthevinh19
@duongthevinh19 Год назад
thank you todd
@robertwhite
@robertwhite 5 лет назад
For some reason, the way you speak reminds me of walter white jr.. :) with that being said... thanks for this awesome video!!
@shawnlauderback
@shawnlauderback 4 года назад
FreeThinker I was just thinking that! Great video though!
@laurabrown6073
@laurabrown6073 3 года назад
One of the Best Ideas of SoundProofing is "SoundProof Curtains" it actually Block outside Noise coming from Windows. Check Here: livesoundproof.com/best-soundproof-curtains/
@travis.gooden
@travis.gooden 3 года назад
@@laurabrown6073 Also with a mouthful of soundproof curtains you wouldn't even hear that pesky lisp Walt White Jr had!
@Upbeat_JMF_Drums
@Upbeat_JMF_Drums Год назад
Does it have to be full, or would it be on to just have a layer across the front of the trap so you can save on the rockwool?
@ChrisBevrly
@ChrisBevrly 5 лет назад
Can't wait to make mine
@beatsbyemzy4750
@beatsbyemzy4750 Год назад
nice video man
@jcisme
@jcisme 3 года назад
They look great but how well do they work at absorbing the below 100hz sound waves ?
@muffemod
@muffemod 2 года назад
LOL thought this was a slice of cake in the thumbnail.
@ToddAudio
@ToddAudio 2 года назад
Lol I hadn't thought of that but I can definitely see what you mean!
@jeffmaxwell7041
@jeffmaxwell7041 6 лет назад
You still have your fingers......SURPRISE! Never....EVER reach over and in front of a table saw blade! I taught Industrial Arts for 40 years and never had an injury on one. Please put the splitter and guard assembly back on . They may seem inconvenient but they are there to keep your fluids inside of you! Don't feed the shark!
@damondahl
@damondahl 4 года назад
THANK YOU!
@bobtee7899
@bobtee7899 7 лет назад
Maaaann your good, i can see the tips of all five fingers on the floor at my house...lol. great video man.
@ToddAudio
@ToddAudio 7 лет назад
+Bob Tee haha thanks! Yes, I actually should have recommended using a stock miter gauge and fence where possible, as Andrew mentioned in his comment. Safety first!
@tommymillett1675
@tommymillett1675 7 лет назад
Trappin da base!
@ToddAudio
@ToddAudio 7 лет назад
Haha yes indeed!
@georgecox9964
@georgecox9964 4 года назад
Hey Todd! I see you have 3 bass traps for each corner. Does the item list cover the items needed per whole corner (all three bass traps), or per bass trap? Great vid!
@wmhemphill8642
@wmhemphill8642 3 года назад
Great video.
@donbeats6582
@donbeats6582 5 лет назад
Great video
@Mrverlie1
@Mrverlie1 7 лет назад
very elegant design... an air gap between the trap and the wall would be very helpful
@ToddAudio
@ToddAudio 7 лет назад
Thank you! I might try that sometime.. it will require a little more space but I think I could pull it off.. Given the amount of space I used (without adding more distance outward from the corner), what I researched seems to show it varies based on the material, and that with Roxul Safe N' Sound, in this amount of space, it is best to go all the way filled in. However, once it reaches a certain distance from the wall then the air gap was better.. or on the other hand if you wanted to use less material, an air gap is better than pushing everything in closer to the wall, if that makes sense. It varies depending on the material used. I described this in a bit more detail in response to Uncle Benja's comment below. However, with these DIY projects there is definitely some variance in opinions and results (it can be hard to find info on the subject and examples outside of forums and posts from other do-it-yourselfers), so sometimes the best way might be just to try it! I do think it is likely that if I took this exact design and moved it out a bit further to create an air gap you might be right! Thanks for the feedback!
@lgmnowkondo938
@lgmnowkondo938 5 лет назад
air gap is not beneficial....the best corner traps fill the entire corner. Perhaps a different material would help bass frequencies a bit more here...but I suspect this is a solid absorber.
@mattmitchell6390
@mattmitchell6390 3 года назад
Great video! Thank you!
@SkyRidesMTB
@SkyRidesMTB 4 года назад
Good video man. Thanks!
@michaelpal7641
@michaelpal7641 4 года назад
@Todd Audio- Great video, but I have a load of questions. I want one corner trap-really don't want to stack. The height is approx. 80". Could I make my frame that long or should I make two frames at 40"? Also, I don't have a table saw-Do you think Lowe's or Home Depot would make those 45 degree cuts if I purchased the 2"X 2" strips? I'm trying to wrap my head around how you made those triangular cuts? How did you calculate the measurement of the 3 sides?
@andrewhigdon8346
@andrewhigdon8346 2 года назад
Did you ever consider adding a proper extension to the outlet which would give you the same options or more for power placement and remove the compromise of having to leave that outlet exposed. Either get a high quality power strip with a 90 degree plug and build over that, leaving the strip exposed for even more versatile use. Don’t be confined by where “plugs” are. Add to them and place the “plugs where you can better use them, whether they are 120 volt, speaker cable jacks, xlr jacks, 1/4”, whatever. Compromises are just solutions waiting to be found.
@wojciechczupta
@wojciechczupta 4 года назад
appreciate your effort, but did you actually measured if that has any impact on frequencies below 100Hz? I thought a simple acoustic mat can't do anything to low frequencies unless you use tonnes of it
@JohnMarshall-NI
@JohnMarshall-NI 3 года назад
For these traps to be properly effective, you would need to take off the inner corner and leave an air gap.
@justincdotme
@justincdotme 4 года назад
cool concept!
@lockboxpresent4470
@lockboxpresent4470 6 лет назад
thats very helpful video thank you for that.
@ToddAudio
@ToddAudio 6 лет назад
No problem!
@renecaron6409
@renecaron6409 5 лет назад
I've read that it is better to leave some air at the back instead of completely filling the bass trap.
@ToddAudio
@ToddAudio 5 лет назад
I think you are right. I've heard that too. I've actually moved into a smaller room now and the panels are propped up againts the wall with an air gap instead of mounted on the wall... but there is not really any precision. It just happens to be the way I put them. I think it might still make a difference but I haven't a/b tested it or anything.
@444Inlakesh
@444Inlakesh 3 года назад
Thanks
Далее
ACOUSTIC TREATMENT - How to Build a KILLER Home Studio
30:31
Corner Bass Trap Nonsense - www.AcousticFields.com
7:01
CHEAPEST Budget way For SOUNDPROOFING a Room
15:06
Просмотров 1,9 млн
(passo a passo) bass traps premium
7:26
Просмотров 21 тыс.
How to Build DIY Tube Traps for Any Studio
17:13
Просмотров 136 тыс.
DIY Acoustic Panels: Room Acoustics How To
6:43
Просмотров 30 тыс.