DIY Bender for thru wire for lures(step by step)English version 

1

Thank you so much brother...enjoy fishing...

Also using a piece of metal / welding wire / rod would add metal to bond the two pieces together another thing the tip of the welder shouldn't touch the pieces it will ruin the cup and or tip that throws the arc instead practice keeping the tip really close with out touching the parts being welded , it should make nicer looking welds and parts won't get stuck on the tip of your welder also you won't have to replace the tip or ceramic cup as often , foot pedal does help but isn't necessary the best thing to do is practice the control of the arc while welding and on dry runs meaning no weld but act like you are to insure you are confident before starting to weld especially on bigger projects, mainly keeping the electrode from touching the work piece was your problem which with practice can be easily fixed

I hope it will help you making a lot of lures...enjoy life ang fishing amigo

There is translation in Russian just click on setting option on the video and click on subtitle/ cc then click Russian language.. Thank you soo much and have a Happy Holyday...keep safe my friend.

Yes it is on the center.

Oh, and you stuck the tungsten on the part...there are two kinds of TIG welders: those who occasionally stick the tungsten and those who lie about it. ;) If you'll re-grind the point of the tungsten after sticking or dipping it in the metal, it will arc and run better. A drill to spin the tungsten and a bench grinder make fast work of re-grinding those. Thanks again for the video.

Thank you soo much ,your comment inspired me to continue on what I am doing.

I'm soo sorry but I do not sell any of my tools that is why I share my Ideas for me encourage people to make their own...I know you can do it...

@@angelswayofadventure8368 I see your point. Anyway your video clip is really nice!!!

Ok n yun tignan mo nlang ang result pwede mo nman e grind para lumiit...

@@angelswayofadventure8368 Yung inyo po ba sir ilan millimeters? Wala po kasi ako alam sa mga ganyan hehe

Tama lng yn kc saakin 0.18" or 4.56mm at 0.09" or 2.35mm

@@angelswayofadventure8368 Thank you sir!

Well if you may fit 2 huge pins and 2 small pins in 1 bolt you may do it...but I only show how to make a single bender..but the concept of makin it is the same process...I even have 3 different diameter of huge pins in just one bolt...

It is up to you how many different diameter of eye bend you want to fit in just one bolt...

Como estas mi amigo ... espero que te vaya bien...

I hope it will help in your DIY

Well it use as back to back,I just made a set of 2 bender in one bolt but you can just made 1 huge pin and 1 small stopper pin.

It's a stainless steel

I use 1/32 or .0325 diameter wire

Thank you but I really don't sell it I just made this video for everybodys tutorial..sorry, I know you can make it your own.

Nko sayo ako natututo gumawa ng mga pain...keep safe idol..

@@angelswayofadventure8368 haha pang Tulingan at tuna mga pain ko idol ikaw nman magaling ka sa jig, tapos try ko dn gumawa ng molde turuan mu ako 😄

I made those mold.

The only difference in putting a pins is when you put a different sizes of pins in one bender because differnt sizes of pins can give you many choices of hook eye sizes...the small pin is for cornering only but the big ones are for your eye size

@@angelswayofadventure8368 Thank you. Also please, can the CORNERING pins be of any size? For example, if I have a 4 mm and a 5 mm pin, can I make loops in those sizes while using the other pin as a cornering pin? Or, do cornering pins need to be smaller, like 2 or 3 mm? Thanks again.

I use lacquer automotive paint because it stick to metal very well and for my coat is just krylon gloss crystal clear

Thank you for responding 👍 Great job

Sorry brother but I don't sell I just made the video for tutorials...

Look at your drawing is different than the one that you mounted on the bench

Yeah but the method is the same I only fitted 4 dowels but the concept is just the same...because you can fit 2 kinds of bender in one bolt i just show 1 set...

Your idea is great and very practical in application of fishing or other uses. Thank you for your gift , you are truly blessed!