DIY Bluetooth Gamepad -

Подписаться 449 тыс.

Просмотров 359 тыс.

50% 1

In this project we’re building a DIY gamepad using the Bluefruit EZ-Key module and a 3D printed case.
The Bluefruit EZ-Key HID keyboard controller is a bluetooth breakout design for making DIY keyboards and game pads. It’s requires no programing and works with just about any trigger or push button. It takes up to 12 inputs and can be powered with any 3-16 VDC.
Check out the full tutorial
learn.adafruit.com/diy-blueto...
Download STLs
www.thingiverse.com/thing:686275
www.youmagine.com/designs/diy...
cults3d.com/en/game/diy-bluet...
-----------------------------------------
Visit the Adafruit shop online - www.adafruit.com
Subscribe to Adafruit on RU-vid: adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: adafru.it/showtell
Watch our latest project videos: adafru.it/latest
New tutorials on the Adafruit Learning System: learn.adafruit.com/
Music by Noe Ruiz: / ecken
-----------------------------------------

Наука

Опубликовано:

24 фев 2015

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 306

@adafruit 9 лет назад

*DIY Bluetooth Gamepad* blog.adafruit.com/2015/02/26/diy-bluetooth-gamepad/ In this project we’re building a DIY gamepad using the Bluefruit EZ-Key module and a 3D printed case. The Bluefruit EZ-Key HID keyboard controller is a bluetooth breakout design for making DIY keyboards and game pads. It’s requires no programing and works with just about any trigger or push button. It takes up to 12 inputs and can be powered with any 3-16 VDC. The Perma-Proto comes in different sizes which is perfect for making all sorts of projects. The ½ sized Perma-Proto breadboard is like a business card and which makes it perfect for making a small game controller.

@thecoolkidsclub1436 8 лет назад

If I added 6 more buttons in a certain order could I make this a PS3 controller

@adrianpena323 8 лет назад

Hey. One question , can you tell me stuff that joins wires without using solder. Please reply. Thank You.

@captaincleanup9627 8 лет назад

I would like to make the exact same thing but with an analog stick instead

@khalilalishaw2283 8 лет назад

can you do a controller with LB,LT,RB and RT as well please

@SpeakerLoverEPIC 8 лет назад

+Adafruit Industries What was the game you played?

@TheJayMadd1 7 лет назад

This is way cool! I'm actually in the process of building a GB-Zero at the moment, but my next project will be an actual console build based around a Raspberry Pi 3 and I really wanted to go down the route of Bluetooth wireless controllers - thanks so much for this! :D

@RobertAndrews88 4 месяца назад

Admirable soldering skills there, Noe - this video is worth watching for that alone. 👍

@JohnPaulMusicUK 7 лет назад

love the idea of this but setting up a floorguitar pedal with 12 inputs for things like iPad apps that use keyboard inputs, like Loopy HD

@dianasmith6697 Год назад

❤❤❤ I like this how you put the gamepad together.❤❤❤

@dianasmith6697 Год назад

And I also liked how you tested the gamepad.

@user-dk3dn7bt6y 2 года назад

Okay. Speaking of which. What about ''Trog!'' controllers? Rex's buttons is red, Bloop's buttons is blue, Spike's buttons is yellow and Gwen's buttons is pink

@RKvasha2009 2 года назад

Да

@IDAWKYI 9 лет назад

I'm in the process of turning a nerf longshot into a virtual reality controller with a wii remote with motion plus for mouse controll and a nunchuck in the grip. I have come to a conclusion that I've run out of keys with most games. And this is a perfect idea for me to incorporate more. Why didn't I find this earlier!

@Davidsama 8 лет назад

Thats actually pretty badass..

@OldManTheseDays 8 лет назад

What a cool project! Thanks for sharing!

@dianasmith6697 Год назад

I like your game pad that is so so sooo awesome. Very good.

@belugaabs 7 лет назад

please make tutorial like this again about Bluetooth portable speaker

@NickCatto 9 лет назад

Great video Noe!

@NoeRuiz 9 лет назад

Thanks Nick!

@krunchyfrog 9 лет назад

It might work on iOS on icade compatible games if you follow icade standards. The icade just uses keyboard key presses for for button press button release. If you can program each button to be a key...

@adafruit 9 лет назад

Thanks for the tip!

@RatherBeEmbed 2 года назад

thank you

@JacksonXtreme 8 лет назад

l could remake that into a mini fighting game controller. With 6 buttons on the right. And the Start/Select buttons would be on the top, just to avoid design complexity.

@VoiceKulaka 7 лет назад

Really cool!

@JoseDilucchio 7 лет назад

Everything is so clean and perfect, like damn!

@NerdGlassGamingPA 6 лет назад

Looks awesome man ! I stumbled upon your page and you are so cool. Keep it up !

@qurantranslations2272 4 года назад

This is sick

@LittleRainGames 6 лет назад

You can press all the dpad buttons down at once, just wanted to point that out. I just made a snes controller last month, designed my dpad so i went through figuring that out.

@LittleRainGames 6 лет назад

Cool none the less. Mine i didnt store the arduino in the gamepad, it hooks into a bus im creating that you can plug in any old retro controller into and use as usb. Also working on making it able to plug into a nes, and possibly a snes.

@ErinCMurphy1 7 лет назад

Excellent!

@atealime 8 лет назад

That guitar one is cool.

@dianasmith6697 Год назад

Also the gamepad reminds me of the NES controller.

@LuluLovesRollerDerby 8 лет назад

Wish I could like more then once!

@slgadgetsclub2398 3 года назад

superb kollo

@insideman7501 8 лет назад

ur genius,dude!!! liked, düster subscribed

@insideman7501 8 лет назад

shared*

@CJ-wn5vh 4 года назад

Very clear guide!

@nintendomain4956 4 года назад

I only wanna learn how to make so much DIY’s

@duffymv001 3 года назад

Can you make a similar tutorial for this same controller, but using a Circuit Playground Bluefruit? Getting stuck on setting it up for this particular controller - thanks!

@therealvstrv743 5 лет назад

So cool

@ItaloLima 6 лет назад

Very Nice Bro !!Like !!

@generalofg3377 8 лет назад

I'd love to make this as long as it's not Bluetooth though because it lags like crazy but if it was USB I would be fine with.

@carmelonazario3807 6 лет назад

Would this be able to connect to an xbox one system? I would love to learn how to make them. I am loving all the videos here on the channel. Man if i learn coding and Adafruit electronics, I am going to start calling myself TheCreadax3D. LOL. awesome vid, i learn alot watching these. keep up the awesome work.

@saimoonislam9710 8 лет назад

Awesome Bro........

@CRAugustoSalazarMontes 7 лет назад

Hi, very good job, a question, what programs do you use to do the design in cad ?, greetings from Mexico and see you soon.

@tpankajkumar 8 лет назад

Having a 3d printer is my dream :)

@ianmcmill 7 лет назад

Wait. What PLA cooler design do you use on the printer shown in the video?

@ImGriffinP 9 лет назад

Love the project!! Would I need to change anything to add two buttons as LB and RB at the top? Aside from editing the stl of course.

@dj505Gaming 8 лет назад

Don't think so. Just connect the 2 extra buttons to ground and 2 free input pins and it should work fine

@PhantomHellion 8 лет назад

Thumbs Up! Shared! Noe rocks!

@RichardBousquet 6 лет назад

When's the new rev of the bluefruit ez key coming??

@gabor222 Год назад

It looks really nice but I am wondering how does the printing cost of the whole enclosure compare to buying a standard enclosure. I mean it makes sense to print it when you need a special shape but why would you print a brick-shaped enclosure when it is available off-the shelf?

@OscarTorresWork 8 лет назад

Awesome tutorial where can I learn basics of electronics and working with breadboards for projects like this?

@jeremyfrank7750 5 лет назад

Is there any software involved with this? im a little confused how you program what the buttons do

@Fareke2 7 лет назад

It will be cool in nintendo switch design :D

@RandomizationShow 5 лет назад

I'm gonna make a phone case out of this :^)

@spidmenfull4516 7 лет назад

tu trabajo es muy bueno, la verdad me gusto mucho sigue asi!!!

@kirby1fan 8 лет назад

Can I make something with analogue sticks or the sliders (like on the 3ds) and more buttons so I can have a full controller instead of a NES layout?

@NJC935 8 лет назад

+Jeff Wenz yep you could but you would have to do the wireing and make a new case

@davax188 2 года назад

Cool video ! Just wondering does it work with iOS ?

@RecallReviews 6 лет назад

What if I wanted to add 2 analog sticks and an l1, l2, r1, r2 buttons and an a,b,x,y set of buttons?

@edgaras2097 7 лет назад

What game did you played in the video?

@aryasingh9247 8 лет назад

cool

@brotharobmusic 8 лет назад

super dope channel!!!

@vonspams8382 7 лет назад

I just finished making it I just have a different dezign but it works

@keenmachine80 7 лет назад

any lag?

@vonspams8382 7 лет назад

brett keen no

@JakeMcNeal 9 лет назад

I noticed that there are only 12 inputs allowed on this device. Is there a way to mimic say a gamecube controller over a bluetooth board. It would need 2 joysticks a d-pad and 8 buttons?

@Gamesforus1 8 лет назад

yeah but you need a bigger bourd

@andymuzzo8568 3 года назад

Are there any new alternatives to the Bluefruit EZ-Key - 12 Input Bluetooth HID Keyboard Controller - v1.2 now it’s been discontinued?

@Asako112211 8 лет назад

I would love to see a Bluetooth Snes controller

@myname9407 2 года назад

Then make one this vid tells you how to do it

@MkmeOrg 9 лет назад

Excellent video as always Adafruit Industries ! At about 2:54 there is heat shrink applied like "tape" around the wire bundle. Care to share the secret here? :) Great work. Cheers

@MkmeOrg 9 лет назад

***** I meant more of how it is heat shrink tape instead of the standard tubing. Not an overly well known technique I'd bet. Could be wrong.

@NoeRuiz 9 лет назад

Eric William Sure, it's just a piece of large sized heat shrink tubing that I cut down the middle and wrapped it around the wires.

@xhappy425 8 лет назад

subscribed!

@MrAdvokaten 7 лет назад

What kind of analog stick can be used? I'd like to make my own ps-inspired controller. Thanks.

@8BitDoTech 9 лет назад

How about the feeling?

@ivatigerfox2548 4 года назад

How does the computer recognize the inputs from the controller? How are they mapped?

@oscar-tm3zb 7 лет назад

is there a way to add 2 more buttons? Its because I want it to play SNES

@gamingcenterxd6892 8 лет назад

easy for you Bro...

@DivanoobAkaGroudon 6 лет назад

do you think I can make a receiver with a bluefruit, connect it on a raspberry and use 4 gamepad like this to play a game with my friend? or i need to use 4 receiver?

@drestrenge8235 7 лет назад

Adafruit Industries is there a way for me to buy one of these from you or the website? I don't have the ability to 3d print or soldering iron. Sorry if this question has already been asked before

@shashmithadananjana5435 2 года назад

Brother this video is super video😎😎😎😀🤗

@akselanthonisenribe9984 8 лет назад

I want to build a Gun Gamecontroler with my friend. Its ment to be suportable for vr. and as cheap as possible.

@homejonny9326 5 лет назад

do you have a telescopic controller project like this (nintendo switch controller type)?

@jviekim 6 лет назад

you're so cool bro!

@joelizalde5007 6 лет назад

Can I have a link of your blue prints for the 3D printer?

@roshanbadola7039 6 лет назад

bro what about l1 and l2 buttons.

@TheMasonGamer 6 лет назад

How do you make a wired controller wireless? I want to get a USB sega genesis controller, but I hate wires.

@amirsamir302 6 лет назад

Check these videos out by Evan Kale ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mt8uF9IblUU.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-H0JaLWahDC0.html

@TheMasonGamer 6 лет назад

Thanks. Do you know if that will work with any controller? I'm not working with a PS2 controller. I'm using a sega genesis controller

@amirsamir302 6 лет назад

Have a look at this, he made this to turn USB mice and keyboards to Bluetooth, I don't know if it will work with a controller

@amirsamir302 6 лет назад

TheMasonGamer And ParkerPro Sorry, I didn't post the link, here it is ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UJaqHnPR-XE.html

@TrollextheTroll 4 года назад

@@amirsamir302 Links dont work you idiot!!!

@gabruekqbryh7871 3 года назад

Could u make this in altoids if’s tin with a teensy

@ArrowFox89 3 года назад

I'm gonna make one out of an Altoids tin

@Proxyxd1 8 лет назад

could i have a tutorial in how to set the keys up? (like that start button is foe example the x on the keyboard)

@_rsantos 9 лет назад

very well

@dj505Gaming 8 лет назад

I'd love to make a little arcade mount for my android tablet with this, like the one shown to the right at 0:53! It'd be awesome to hook it up to MAME and configure it to play the games. Is there by chance a tutorial on how you built that one?

@tsbackupchannel7302 4 года назад

I'm curious how this trigger game on the phone. I know it connect using Bluetooth but I mean the smartphone's game is onscreen touch so how does it know what button is pressed? Is it something programmed for specific game not any game can use this controller??

@zacpapachatgis164 8 лет назад

Cool tutorial...just wondering can I build 2 of these to work with my raspberry pi 2?? if so how??

@dj505Gaming 8 лет назад

It might work with a USB bluetooth module, but that may require quite a bit of setup.

@nitropwd 8 лет назад

I'll take two....seriously!

@WellBeSerious12 5 лет назад

How much for all the parts? How much for a prebuilt one?

@fern5393 8 лет назад

can you make a controller and like mini tv consel out of them. ?

@vysakhak191 2 года назад

I want to make a wired (usb) version of this with Arduino pro micro. Any ideas or suggestions?

@cliptrashbin2389 5 лет назад

Do you know how to make one that has bumpers and more buttons

@xash06 8 лет назад

Ur a pro

@DonGuelo 6 лет назад

Can I just buy the power parts and use an old wii pro controller?

@mehtabsingh4665 6 лет назад

Hi man. Can u make a video on how to turn redgear elite gamepad to bluetooth gamepad. I will really appreciate ur help.Thanks man

@RatherBeEmbed 2 года назад

Looks like Bluefruit EZ Key is pretty much not being made anymore, so I was thinking of making this with the Feather 32u4. Are there any tutorials as good as this one for making it work as a bt controller?

@siryoungboy Год назад

nah

@dianasmith6697 Год назад

Mom yes FAMICOM.

@ChrisFredriksson 9 лет назад

Cant find anyone asked for it, so here goes.. What game is that? Looks lovely, especially with that 3D printed controller which looks awesome!

@adafruit 9 лет назад

Super Mega Worm!

@ChrisFredriksson 9 лет назад

Adafruit Industries Sweet, thanks! =)

@smashintrees6875 8 лет назад

Darude-Sandstorm

@sexypianonotes6212 8 лет назад

i think its nubs world

@vocalead 6 лет назад

Total newbie to the world of micro processors here. Is there any way to program this EZ-key to transmit MIDI messages, instead of just keyboard keys? thanks to anyone.

@LemonRush7777 9 лет назад

A keychain version of this would be great.

@alecpetsche1104 8 лет назад

I have the same soldering tool its my dad's, I want to get into electronics young so maybe I can make a career out of it, and I wanna build guitars....and video game stuff too...

@myname9407 2 года назад

@andrescervantes624 5 лет назад

Es bellísimo

@MrSirFluffy 3 года назад

Can this be used to connect to a Pi via USB. I want to make my own conrroller for a Retropie console.

@sodapantzu 6 лет назад

Is there a way to make this a wires USB controller instead of bluetooth

@jacobmcallister6041 8 лет назад

what game are you playing in the intro? available for raspberry pi emulationstation?

@JakeGeremia 7 лет назад

Jacob McAllister if you're talking about the game at 0:22 , I believe that game is called effing worms and it is on the App Store, and I also think it it on the computer