Тёмный

DIY Bluetooth Speaker Kit Build | Parts Express MKBoom Boombox 

Donny Terek
Подписаться 147 тыс.
Просмотров 235 тыс.
50% 1

✅ MKBoom portable speaker kit (US/EU) - parts-express.... / bit.ly/48RGEDQ
In depth build instructions, full component and tools list and much more in my build log below! 👇
www.instructab...
Parts:
18650 battery cells (x3) - bit.ly/3J3KCNl / geni.us/LqDK
Leather handle - parts-express.... / geni.us/jPboqt
Rubber feet - bit.ly/3IjqU2z / geni.us/E2PU4
16mm M4 screws - bit.ly/3v6OKER
Heat shrink tubing - bit.ly/4c7c9wa / geni.us/WZeB
Amplifier knob - bit.ly/4a8MIsz / geni.us/TIJibdY
MDF sealer - geni.us/9YyKv
Tools:
TS101 soldering iron - bit.ly/3HUzrI9 / geni.us/owyDm5G
Cordless drill - bit.ly/4bZg5PN / geni.us/A5AZi
Drill bit set - bit.ly/3S3i6zC / geni.us/ktAK1M
Center punch - bit.ly/3xslc8u / geni.us/o5WBEwB
Wire stripper - bit.ly/4dG6Jt2 / geni.us/6ep
Orbital sander - bit.ly/3HBOC8O / geni.us/gHqu0W
Wood router - bit.ly/3I7Aplm / geni.us/6okRl
Router bits - bit.ly/3Tykh1z / geni.us/oBKry
Tack cloth - bit.ly/3jIEL8m / geni.us/Bv64JV
Hi everyone! So good to be back with yet another speaker project after a long break.
Since most of my builds require quite a few tools to complete, this time I decided to build a portable speaker using a kit that you can purchase easily. I thought it would be a great idea to share a high quality speaker kit that is easy to assemble on your own and sounds great just as well.
I was fortunate enough to have Parts Express provide me with an inexpensive MKBoom speaker kit that consists of the drivers, the KAB amp board with the necessary accessories, port tubes, crossover boards, and the knock-down cabinets which are of great quality. If you are wondering about building a speaker yourself, I highly encourage you take a look at this MKBoom speaker kit.
I have to say that I am very impressed with the overall quality of this speaker kit. From great packaging to high quality of the CNC'd panels, this kit provides all the needed instructions, bolts, screws etc. to help you build a one of a kind portable Bluetooth speaker that you can customise however you like and that also sounds amazing.
Producing clear highs, wide soundstage and punchy and submerging bass from 4 inch woofers is just incredible. It sounds even better knowing that this speaker has been built by yourself.
To my mind, this speaker has an incredible value - not only is it not pricey, it is also a one of a kind speaker that you won't be able to buy off-the-shelf at the store since it will be customised with a unique design.
I have this speaker playing some soft jazz tunes while writing this description and can't get enough of the great sound quality it produces.
Hope you give this build a try!
See you on the next one!
- Donny

Хобби

Опубликовано:

 

28 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 207   
@HandyBear
@HandyBear 3 года назад
The leather handle is a nice touch!
@DonnyTerek
@DonnyTerek 3 года назад
Thanks!
@DGen.X
@DGen.X 3 года назад
It's been a while, I admire your DIY projects, keep safe!
@DonnyTerek
@DonnyTerek 3 года назад
Thank you so much! Hope you stay safe as well.
@nikhilsuryawanshi6301
@nikhilsuryawanshi6301 3 года назад
@@DonnyTerek last sound test is real ???
@stevefick3919
@stevefick3919 3 года назад
Hey, Donny, just finished building mine. Sounds really good, and boy does it crank! Lots of power. I was quite surprised at how good it sounds. I hooked up a cd player through the aux port. Works like a charm. Bluetooth synched up no problem. Parts Express has some really cool kits! Very reasonably priced.
@DonnyTerek
@DonnyTerek 2 года назад
Hi! Awesome to hear that! Definitely one of the better DIY portable speaker kits out there for the price. I will have a few more kit builds in the upcoming months, stay tuned if interested.
@stevefick3919
@stevefick3919 2 года назад
@@DonnyTerek For sure! I've been looking at the GR Research X-LS Encore kit as well. A little bit more pricey, but I've read very good reviews on them.
@ГретыйТумблерг
@ГретыйТумблерг 3 года назад
Красиво!!! Даже добавить нечего... Профессионал... Спасибо, приятно было смотреть.
@NekitGeek
@NekitGeek 3 года назад
You make best DIY portable speakers!
@DonnyTerek
@DonnyTerek 3 года назад
Thank you so much!
@diegoaguilar7918
@diegoaguilar7918 3 года назад
Muy buena bocina me encanta felicidades por el buen trabajo y terminado
@NekitGeek
@NekitGeek 3 года назад
You can use Aday1701 DSP for make sound better. And make limitter from op amp to prevent speaker blow
@DonnyTerek
@DonnyTerek 3 года назад
Great idea!
@dennyindarnanto2134
@dennyindarnanto2134 3 года назад
I believe that your project is not DIY, but AIY ( assembling your self )😀
@valerioodorisio
@valerioodorisio Год назад
so an AYS
@JP-pc6to
@JP-pc6to 3 года назад
Hi. Is there a reason why you did not put foam or padding inside? Wouldn’t it help it sound better? Just curious. I’m thinking of building this kit. It would be my first.
@ScottSchramm
@ScottSchramm 2 года назад
At 7:29 after you applied the sealer, what kind of sand paper/sanding block did you use?
@kuratongbaleleng0716
@kuratongbaleleng0716 3 года назад
Very nice DIY vid. You got yourself a new subscriber. Keep it up sir.. Best regards..
@DonnyTerek
@DonnyTerek 3 года назад
Thank you so much! Welcome!
@paswanravi5888
@paswanravi5888 3 года назад
W🤗W you made it with so much L😍VE That's why it looks AWESOME 😊
@DonnyTerek
@DonnyTerek 3 года назад
Thank you! 😊
@Dilson1327ify
@Dilson1327ify 3 года назад
Ótimo trabalho.
@fearmutlu
@fearmutlu 3 года назад
One Word amazing.
@DonnyTerek
@DonnyTerek 3 года назад
Much appreciated 👍
@kivikaz
@kivikaz 2 месяца назад
I watched your video.. Almost all is good, but... C`mon, dude.. you were gluing up perfectly machined boards using tape..!!?? why the hell?? You ended up with horrible gaps between panels which you filled with putty.. buy yourself some clamps and the end result will be way better. Other than that, good work
@cbenpictures
@cbenpictures 3 года назад
Satisfying
@DonnyTerek
@DonnyTerek 3 года назад
Thank you!
@jhonnyreyes4139
@jhonnyreyes4139 3 года назад
*Exelente trabajo*
@robertosara2963
@robertosara2963 3 года назад
hello, include language translator in your video on youtube - please your very interesting projects. sound can be improved by adding soundproofing inside the walls. Thanks
@DonnyTerek
@DonnyTerek 3 года назад
Thank you! Since these videos don't have a voice over, I can't include a translator, sorry.
@jamesbugg9420
@jamesbugg9420 3 года назад
Great Video...thanks...where did you get the volume knob please?
@DonnyTerek
@DonnyTerek 3 года назад
Thank you James! Please check the description for the link to the volume knob.
@videostarish
@videostarish 3 года назад
Wow...! 😮👍👍
@DonnyTerek
@DonnyTerek 3 года назад
😊
@adriandeb2710
@adriandeb2710 3 года назад
Hi, can i have details off the soldering iron please,
@DonnyTerek
@DonnyTerek 3 года назад
Of course! Please check the video description for the TOOLS list.
@just_curi0us
@just_curi0us 2 года назад
woooow!
@dominomoody7712
@dominomoody7712 3 года назад
what do you seal it with?
@DonnyTerek
@DonnyTerek 3 года назад
Currently I am using two component MDF sealer bought at my local paint store.
@emanuelevurchio5175
@emanuelevurchio5175 3 года назад
Dove comprare questo kit
@noahzanon4871
@noahzanon4871 3 года назад
Small bass tube !
@DonnyTerek
@DonnyTerek 3 года назад
But the bass it produces is definitely not.
@noahzanon4871
@noahzanon4871 3 года назад
@@DonnyTerek ok !
@nox1cous654
@nox1cous654 3 года назад
Are you sound engineer? I guess not, cause bass port has to be specific width and length for the specific enclosure and drivers. Just making the bass reflex bigger without doing the math will make sound worse.
@sergeybu930
@sergeybu930 3 года назад
Where is the middle? I can’t hear it
@DonnyTerek
@DonnyTerek 3 года назад
The camera microphone definitely does not do the speaker's justice.
@ДМИТРИЙЛИТВИНЕНКО-т3м
👍👍👍👍
@thepolymorphicaris1939
@thepolymorphicaris1939 3 года назад
I don't want the building part I only want the testing part 😂
@DonnyTerek
@DonnyTerek 3 года назад
😅😅
@sagramsagram4632
@sagramsagram4632 3 года назад
Damn you don't need jbl if you have this
@canadaparis3413
@canadaparis3413 2 года назад
👏👏👏👏💪👍
@satamototo
@satamototo 3 года назад
Hm... 119$ vs 199 EURO. Here (in Europe) we don't eat the tomatoes with the bush...
@Masibe
@Masibe 3 года назад
anyone selling?
@DonnyTerek
@DonnyTerek 3 года назад
Check the link in the description.
@Masibe
@Masibe 3 года назад
@@DonnyTerek okay, thanks 🙏👍👍
@ahyonvlogs
@ahyonvlogs 3 года назад
Amazing tools. Esp d digital soldering iron.
@welcometomychannelswelcome7261
@welcometomychannelswelcome7261 3 года назад
Those parts are very expensive from Parts express and it's not really DIY from you
@DonnyTerek
@DonnyTerek 3 года назад
They are actually not that expensive since you buy it as a kit, which includes the enclosure as well.
@WM22
@WM22 3 года назад
@@DonnyTerek but it doesn’t come with the cells
@luizfilipeluiz2013
@luizfilipeluiz2013 2 года назад
Liuzliuz 🙂
@observer2320
@observer2320 3 года назад
из таких компонентов любой соберёт
@ЮрийЗахаревский-ц9д
Я только хотел написать
@kozelsk
@kozelsk 3 года назад
Больше похоже на рекламу кит набора
@f1remandg
@f1remandg 2 года назад
I thought it was excellent, very well presented and delivered, I thought you would have done another coat of paint and I’ve not checked yet but hope you’ve done a link to the component parts. DG New Forest U.K.
@DonnyTerek
@DonnyTerek 2 года назад
Thank you!
@vip-1
@vip-1 Год назад
Price for EU - 250 € for this kit sounds little bit expensive
@surasakarkadsupa4467
@surasakarkadsupa4467 3 месяца назад
What do you use before painting?
@obysan266
@obysan266 3 года назад
Hello, can you provide some dimensions for the port tubes and how to make crossovers? I can't find them in the specification list. Thanks, great video.
@DonnyTerek
@DonnyTerek 3 года назад
Hi! The ports are 26x95 mm I believe. The crossovers come with the kit already assembled.
@playerongaming
@playerongaming 3 года назад
SOUND IS CLEAR ITHIG THAT DUAL WOOFER WHICH IS PRODUCE A SOUND AS WELL AS BASS
@djkikikeproducciones
@djkikikeproducciones 2 года назад
LO PODRIAS VENDER
@wizard44
@wizard44 3 года назад
Which kit do you recommend the most at this point? Not even sure what my options are for great kits out there...
@DonnyTerek
@DonnyTerek 3 года назад
For now I would definitely recommend getting this one. I will be posting a larger kit soon.
@seeworldwithus
@seeworldwithus 3 года назад
Sir can you please make 2.1 subwoofer and soundbar system And your build video are to good
@DonnyTerek
@DonnyTerek 3 года назад
Thanks! I really appreciate that. I have many projects on the way, I might build yours in the future.
@matthieujansen6751
@matthieujansen6751 Год назад
Hey Donny, i am maybe planning on buying this set and i would like to know something. How is the bass on this thing? because i like a bit of hearable bass. and how many people can conncect on the speaker?
@DonnyTerek
@DonnyTerek Год назад
Hi! The bass is not very deep but rather quite soothing to listen to, especially when placed close to a wall. I have built this speaker quite a while ago and don't have it with me anymore so I can't tell you my precise memory of the bass quality this speaker has.
@matthieujansen6751
@matthieujansen6751 Год назад
@@DonnyTerek hey thanks for your answer can you remember how many people can connect to it on Bluetooth?
@darnomoodley4948
@darnomoodley4948 3 года назад
Can you make me a speaker pls
@DonnyTerek
@DonnyTerek 3 года назад
Sure!
@darnomoodley4948
@darnomoodley4948 3 года назад
@@DonnyTerek?
@DonnyTerek
@DonnyTerek 3 года назад
Feel free to contact me by email which you can find in my channel's 'about' section for more details.
@darnomoodley4948
@darnomoodley4948 3 года назад
@@DonnyTerek OK thank you
@titan90000
@titan90000 3 года назад
Great build video! I am thinking about this kit for my first diy audio build to take camping. I have read that you can add a second battery pack to this kit to extend playback time. From your experience building this kit how easy would it be in your opinion? As I couldn't find any directions on how to do so.
@DonnyTerek
@DonnyTerek 3 года назад
Thank you! This is a great kit if you are looking into it. I am sure it wouldn't be too difficult to add a second battery board but I'm not sure about the wiring for it. I guess you could place the secondary battery unit in one of the speaker cabinets and route the connector through the crossover wire hole. I guess it would be best to reach out to Parts Express for guide to wiring the battery pack extension.
@純屬好玩
@純屬好玩 2 года назад
哪裡買
@vishalgouda8130
@vishalgouda8130 5 месяцев назад
Box size pls
@GuyTechLab
@GuyTechLab Год назад
Hello, congratulations for your work. Could you give me the thickness of the wood used and the diameter of the tube? Thank you
@DonnyTerek
@DonnyTerek Год назад
Hello, many thanks! Please check the description for my Instructable on the build for more info.
@thoungbun3829
@thoungbun3829 3 года назад
How many hours for playing time (only 3pcs of battery like this)?
@DonnyTerek
@DonnyTerek 3 года назад
8 - 10 hours at moderate volume
@thoungbun3829
@thoungbun3829 3 года назад
How many watts for this speaker?
@butchfoster5256
@butchfoster5256 3 года назад
I get 3 to 5 hours at outdoor volume 70 to 75 percent. Great sound.
@abubakrsharipov9216
@abubakrsharipov9216 Год назад
Can you please tell me the size of this case?
@DonnyTerek
@DonnyTerek Год назад
Dimensions: 17.75" W x 5.5" H x 7.5" D (from Parts Express)
@nymachowdhury2312
@nymachowdhury2312 2 года назад
What is the name of the first music? and your builds are great.
@onlydjremix0500
@onlydjremix0500 3 года назад
How much price
@dhruvtampa146
@dhruvtampa146 3 года назад
placing those screws earlier was just genius didn't expected that was pre planned. very nice build wish parts expressed was for india aswell.
@DonnyTerek
@DonnyTerek 3 года назад
Thanks! I think Parts Express ships worldwide.
@dhruvtampa146
@dhruvtampa146 3 года назад
@@DonnyTerek but the shipping cost and customs are just insane in india😅😅😅
@phrankus2009
@phrankus2009 3 года назад
Just enough attention to detail. without being all anal-retentive. Sure wish there were options for EQ and headphone out.
@DonnyTerek
@DonnyTerek 3 года назад
Thanks! Using an EQ app helps a bit. Not sure if you can get a headphone out on an amp like this.
@pekka6677
@pekka6677 3 года назад
the more we experience, the more we wasted
@ВалерийПират333
@ВалерийПират333 3 года назад
А где заказывали комплектующие ?
@jdchmiel
@jdchmiel 3 года назад
Wow, hands above the router. Way better to mess up some wood instead of your fingers!
@michelholz2063
@michelholz2063 3 года назад
Será que enviam para o Brasil ?
@samanthatierno8770
@samanthatierno8770 Год назад
Just built this unit. sounds pretty impressive!!… worth every penny!… used for 6 hrs straight at pretty high volume and the batteries lasted no problem. Played all types of music. For wattage, price and size theres no other Bluetooth speaker like this👍
@DonnyTerek
@DonnyTerek Год назад
Happy to see you are enjoying yours! And easy to build, too!
@Mahan150
@Mahan150 3 года назад
If we order on one part Express, will supply all items together, as I am in india. I don't was want piece by piece order.
@DonnyTerek
@DonnyTerek 3 года назад
Hi! Yes they supply all the items in one package.
@SparTech44
@SparTech44 3 года назад
super man,,,,,,,,,,,,,,,,,,,,,,, you did it best.
@DonnyTerek
@DonnyTerek 3 года назад
Thanks man!
@Tomulisss
@Tomulisss 3 года назад
Donny Terek Sveiki kainavo siuntimas iš užsienio muito mokestis ir siuntimas Jei taip maždaug kiek kaina gavosi ? Ir per kiek laiko atkeliavo ?
@DonnyTerek
@DonnyTerek 3 года назад
Labas! Šį komplektą gavau nemokamai. Jei domina siuntimas iš Europos, ieškokite nuorodos aprašyme iš Sound Imports.
@stevefick3919
@stevefick3919 3 года назад
Great video, Donny, very detailed! I've been waiting for this to be "in stock" again so I can build my own. I have built several speakers over the years, including ones from Parts Express. Their kits are terrific! Building the C-Notes right now. I like this kit because it has an "input" I can use to hook up a CD player as well as Bluetooth.
@DonnyTerek
@DonnyTerek 3 года назад
Thank you a lot! I am also building the C-Notes very soon! I already have the kit waiting to be assembled.
@anishsashidharan6873
@anishsashidharan6873 3 года назад
Great video, Sir. Hatsoff 👍👌
@DonnyTerek
@DonnyTerek 3 года назад
Thanks!
@jorgecrowley5175
@jorgecrowley5175 2 года назад
Padrísimo!…
@Dysiode
@Dysiode 3 года назад
y tho?
@quanngo1829
@quanngo1829 3 года назад
Hi, I want buy its, can I buy its. Thanks you, I’m from VietNam
@DonnyTerek
@DonnyTerek 3 года назад
Hi, feel free to contact me by email which you can find in my channel's 'about' section or through Instructables which you can find in the description if interested.
@craigenputtock
@craigenputtock 2 года назад
You did a nice job. Pity there's no grill to protect the drivers.
@DonnyTerek
@DonnyTerek 2 года назад
Thank you! Would be a pity to cover up the woofers, haha.
@CraigTaylor
@CraigTaylor 3 года назад
Would using lots of clamps while gluing reduce the need for filler in the joints?
@DonnyTerek
@DonnyTerek 3 года назад
Definitely! The CNC cut parts may need some sanding in a few areas for best assembly. Definitely use clamps if you have them.
@multimucles
@multimucles 2 года назад
Hy Donny. Can i put around 8 or 10 batteries to that circuit board ?
@DonnyTerek
@DonnyTerek 2 года назад
Hi! This board can only fit 3 batteries, you might need a different board to fit more batteries.
@bassboostfactory1
@bassboostfactory1 3 года назад
Nice job😁
@DonnyTerek
@DonnyTerek 2 года назад
Thank you! Cheers!
@台灣安迪
@台灣安迪 3 года назад
請問這些材料要去哪裡買?
@jorgecrowley5175
@jorgecrowley5175 2 года назад
Padrísimo!…
@Rat-oe4vi
@Rat-oe4vi 3 года назад
Ninc 👍👍
@engineer0239
@engineer0239 2 года назад
Awesome build! Really looks like something you could buy in a store. Aren't the Reflex Tubes a little small though? I've heard as a rule of thumb the hole of the tube should be about 1/5 of the membrane area...
@DonnyTerek
@DonnyTerek Год назад
Thank you! The speaker enclosure is designed for these tubes so they are not small.
@engineer0239
@engineer0239 Год назад
@@wb3213 yeah I know. The smaller and longer the tube, the deeper the resonance frequency. But if you make the tubes to small you can develop wind-like sounds. But it seems to be ok in this speaker
@soyabean4362
@soyabean4362 2 года назад
Pls tell me tcp15-4 or nd105-4 which is best ?
@DonnyTerek
@DonnyTerek 2 года назад
I can't answer that, depends on the speaker design and requirements.
@JudeSturman
@JudeSturman 3 года назад
Thanks for posting this! Without it I would not have been able to figure out my MKBoom. This should be the official video! @partsexpress
@DonnyTerek
@DonnyTerek 3 года назад
Thank you so much! So glad I helped you out.
@CreativeChannel-KST_VN
@CreativeChannel-KST_VN 3 года назад
very quality video
@DonnyTerek
@DonnyTerek 3 года назад
Thanks!
@sanchezgedgare
@sanchezgedgare 3 года назад
Dont need a dampening material inside?
@DonnyTerek
@DonnyTerek 3 года назад
Not necessary, but you can add some.
@anastukangphoto
@anastukangphoto 3 года назад
very very niceee build 🤟🤟
@DonnyTerek
@DonnyTerek 3 года назад
Thanks!
@wasimahmad561
@wasimahmad561 3 года назад
It's pretty good
@LeeSangLVS
@LeeSangLVS 3 года назад
Very nice speaker
@DonnyTerek
@DonnyTerek 3 года назад
Thanks!
@hanneslaing3074
@hanneslaing3074 3 года назад
Hey are you abe to tell me what components this crossover uses?
@DonnyTerek
@DonnyTerek 3 года назад
Hi! I'm sure it uses capacitors, resistors and coils!
@CharlesMozart
@CharlesMozart 2 года назад
Simple perfect 👏👏👏👍
@DonnyTerek
@DonnyTerek 2 года назад
Thanks a lot 😊
@stevefick3919
@stevefick3919 3 года назад
Forgot to mention....MAKE SURE YOU TEST ALL THE DRIVERS when the kit arrives. My C-Notes had a bad tweeter. No problem, though, Parts Express is going to send my a new one no questions asked. Great company to deal with.
@DonnyTerek
@DonnyTerek 3 года назад
That's a good point. Will make sure to check mine beforehand. They are a superb company indeed.
@nikhilsuryawanshi6301
@nikhilsuryawanshi6301 3 года назад
@@DonnyTerek hello , I am making bookshelf with this speaker In MTM bookshelf 2 Dayton TCP115-8 in series With HiVi tweeter .... Only problem is ... I am using class D amplifier .... 50 watt / channel Can this Bookshelf run on this amp .... I want to use in 9 x 13 feet hall ....
@stevefick3919
@stevefick3919 2 года назад
@@nikhilsuryawanshi6301 I built a set of those about a year ago, (the TriTrix MTM bookshelf speakers). They are a nice kit! 50 Watts/Channel should be great for a 9 X 13 hall. I have these in my garage which is 16 X 22 and they sound great! I am using a Denon 90 watts RMS channel integrated amp, though.
@joshuarebitoespanola8039
@joshuarebitoespanola8039 2 года назад
how much the budget
@DonnyTerek
@DonnyTerek 2 года назад
Check the description for links to parts.
@hyatprod2509
@hyatprod2509 3 года назад
Amazing work ! 🔥 What are the diameter and the length of the bass reflex ports ?
@DonnyTerek
@DonnyTerek 3 года назад
Thanks!! Those are 26x95mm ports.
@abdulwahid8579
@abdulwahid8579 Год назад
Great job 👏
@DonnyTerek
@DonnyTerek Год назад
Thank you!
@labidabidhou3705
@labidabidhou3705 3 года назад
How much?
@DonnyTerek
@DonnyTerek 2 года назад
Please check the description for links.
@LongLong-wx1nl
@LongLong-wx1nl 3 года назад
Bác lót bằng gì vậy mà sơn không bị ngấm vào gỗ vậy? What substance are you priming with before coating?
@DonnyTerek
@DonnyTerek 3 года назад
I am using two component sealer which I buy locally, but I have placed a link for a different sealer in my Instructables post which you can find in the description.
@LongLong-wx1nl
@LongLong-wx1nl 3 года назад
@@DonnyTerek thank you very much!
@DonnyTerek
@DonnyTerek 3 года назад
No problem! Glad I could help 🙏
@joseotero3381
@joseotero3381 3 года назад
Nice
@DonnyTerek
@DonnyTerek 3 года назад
Thanks
@zabac85
@zabac85 2 года назад
Can you tell me hole dimensions for speakers. Tnx.
@ScottSchramm
@ScottSchramm 2 года назад
It takes a 4" woofer and a 3/4" tweeter
@zabac85
@zabac85 2 года назад
I thought on flushed ring. And I also like to know what is the thickness of the MDF.
@ScottSchramm
@ScottSchramm 2 года назад
@@zabac85 The speakers will be flush in the front. I can't remember the exact thickness of the MDF but i'd say its like 3/4". Very sturdy.
@100mphrush4
@100mphrush4 3 года назад
I like it but the amp is too weak the speakers are not even moving:(
@DonnyTerek
@DonnyTerek 3 года назад
I tested the speaker at around 50-60% volume. You would be surprised to hear that a well designed speaker does not need 'moving' speakers to produce quite deep bass response.
@100mphrush4
@100mphrush4 3 года назад
@@DonnyTerek really?! I ohnestly did not know that
@rickmelton1
@rickmelton1 3 года назад
In a ported design, the woofer barely moves at the resonant tuned frequency. In a sealed design, the woofer reaches full excursion at the tuned resonant frequency.
@slappymcphee
@slappymcphee 3 года назад
Can't get the kit. Link is bad!
@DonnyTerek
@DonnyTerek 3 года назад
Sorry! Seems like the link has stopped working but the product is still there, I will check when it becomes available again.
@DonnyTerek
@DonnyTerek 3 года назад
The link should be working fine now.
@DD-vj4ku
@DD-vj4ku 3 года назад
Did you use any specific spray colour?
@DonnyTerek
@DonnyTerek 3 года назад
Just regular gloss white.
@DD-vj4ku
@DD-vj4ku 3 года назад
@@DonnyTerek Thank you. One more question: would you recommend building this or the DIY WiFi / Bluetooth Stereo Speaker Boombox Build that you also have build? As I see the hardware are similar, so your opinion (since you abviously have built both) would be great!
@DonnyTerek
@DonnyTerek 3 года назад
They are almost identical speakers to each other. Though I would recommend this speaker more since it is rechargeable and portable and has better stereo separation.
@bmwe30mm
@bmwe30mm 3 года назад
please give a link to the case. thanks
@DonnyTerek
@DonnyTerek 3 года назад
Please check the description of the video.
@bmwe30mm
@bmwe30mm 3 года назад
@@DonnyTerek thanks
@brunovaz5514
@brunovaz5514 3 года назад
How much ?
@DonnyTerek
@DonnyTerek 3 года назад
You can check the link in the description for the price.
@jdchmiel
@jdchmiel 3 года назад
What is the sealer?
@DonnyTerek
@DonnyTerek 3 года назад
You can find the link for the sealer in the description. Not the same that I used but will work just fine.
Далее
titan tvman's plan (skibidi toilet 77)
01:00
Просмотров 5 млн
DIY 2.1 Portable Boombox Build | HOW TO
20:49
Просмотров 175 тыс.
I Make This Tiny 2-Stroke Engine From Scratch
31:59
⚡ 10,000V Tough Mudder obstacle 🤣
0:13
Просмотров 37 млн
Годы тренировок
0:39
Просмотров 1,3 млн
тгк hahalivars
0:12
Просмотров 6 млн
Самая защищённая кровать!
0:28