DIY Board and Batten Siding

Подписаться 120 тыс.

Просмотров 157 тыс.

50% 1

In this video, I will be installing board and batten siding onto our house. this is an inexpensive method of siding and really turns out great! check out this video to see how you can do it too. This video is part of a series of videos as we add an addition to the back of our house. This video is number 1 in the series and If you haven't seen the other videos yet, you can check out the links below for those videos.
1. Siding - • DIY Board and Batten S...
2. Gutters - • DIY Vinyl Gutters
3. Electrical - • DIY Electrical
4. Sewer Plumbing - • DIY Sewer Plumbing
5. Hot and Cold water lines - • DIY PEX Pluming
6. Insulating - • DIY Insulation
7. Sheetrock - • Video
8. Spackle - • How to Spackle a Wall
9. Beadboard - • DIY Beadboard
10. Subfloor - Replacement • Replacing rotten subfloor
11. Painting - • How To Paint A Room
12. Vinyl Plank Flooring - • Smartcore Pro Flooring...
13. Toilet Installation - • How To Install A Toilet
14. Shower Installation - • How to Install a Dream...
15. Bathroom Vanity - • DIY Bathroom Vanity
16. Butcher Block Countertop - • DIY Butcher Block Coun...
Support my Channel on Patreon at - www.patreon.com/user?u=32924378
And get access to Chats, Livestream, Shoutout, Giveaways, and much more.
Follow me on Instagram and Facebook for more content.
Instagram: Simon_Says_DIY
Facebook: Simon Says DIY
Material list:
5 - Sheets of 1\2 exterior grade plywood
2 - 1lb. Boxes of 2in galvanized nails (mounting plywood)
25 - primed 1x4x8 (for battens and trim)
1 - box of 2 1/2 inch finish nails (Mounting battens and trim)
2 - tubes of exterior calking
#SimonSaysDIY #HomeImprovement #Siding

Хобби

Опубликовано:

2 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 127

@graceh2684 Год назад

Thanks for making this video. I have an old shed on my farm I’m refurbishing and I think this is how I’ll do the exterior. 👍

@johnnym5564 3 года назад

Great learning video. Looks beautiful. Thank you!

@SimonSaysDIY 3 года назад

Thank you! I appreciate it!

@josephsparks5770 Год назад

As much as I think missing the z flashing was an issue, I loved the basic idea of using sheet plywood to create the board and batten look, and a super durable siding at low cost. Keep re-caulking the horizontal joints religiously, and I think it will last well, great work!!

@SimonSaysDIY Год назад

Thanks! I appreciate it! 😁

@cboug14 4 года назад

Looks nice!!

@SimonSaysDIY 4 года назад

Thanks so much!

@marvinrayweast 3 года назад

Nicely done.

@SimonSaysDIY 3 года назад

Thanks!

@poochthedog8079 2 года назад

Great job! Love the cat.

@SimonSaysDIY 2 года назад

Haha, Thank you! 😊

@thelouiebrand 10 месяцев назад

Nice! I’m in the process of doing my whole house this way. I’m using butyle tape under the seams where my plywood come together. Good job guys!

@SimonSaysDIY 10 месяцев назад

Sounds great! Good luck with your project!

@bikeninja956 3 года назад

This is actually pretty damn cool because it looks descent, it's relatively cheap and like you mentioned it seals things up even better than boards. Win on all fronts.

@SimonSaysDIY 3 года назад

Thanks! Yeah this was my father-in-laws idea and I thought it was pretty great!

@finnreyansh5234 3 года назад

You prolly dont care but if you are stoned like me during the covid times you can stream all of the latest movies on InstaFlixxer. Been binge watching with my brother for the last few days :)

@luccadustin8081 3 года назад

@Finn Reyansh Definitely, been watching on instaflixxer for since december myself =)

@collinbrown9723 2 года назад

great video! also 7:18 cracks me up. Cat didn't want the door closed! LOL

@SimonSaysDIY 2 года назад

Thanks! haha yeah, he loves when the door is open.

@Wakeup382 4 года назад

I can’t believe that 710 views and only double digit likes. This man works his butt off and let’s us into his world. Simon is amazing! Thanks 🙏 Simon! Nice work!I wish we had RU-vid for DH. Thorough...

@CodyCharlesMusic 3 года назад

Your cat is flippin hilarious haha. She wants the door ope.

@SimonSaysDIY 3 года назад

Yeah, it knows it's not allowed to go outside but it likes sitting in the doorway.

@danbailey96 3 года назад

Where the two plywood’s come together horizontally you should have used a flashing and head flashing above your windows

@feralbigdog 3 года назад

do you mean z channel?

@stockpile5584 Год назад

💯

@josephsparks5770 Год назад

I wanted to add Z flashing as I watched! Caulk fails in time, but maybe they re-caulk every 4 years, they might be fine.

@Saice2002 2 года назад

Flashing missing over the window head. Also installing ply wood directly over your WRB will trap water.

@lizjmom Год назад

Thank you - what if you want to cover over old wood siding - any tips please?

@trunk4138 2 года назад

The overall look is ok, I prefer the 1x4s whole 16" centers boxing the window in makes it look way nicer and going with white might as well use composite. Not a fan of the barely vented soffit and there will be issues where the plywood edges butted together. Less issues with tongue and groove. Screws hold better than siding nails in this style of application.

@SimonSaysDIY 2 года назад

Thanks so much for the advice! I appreciate it :)

@elizabethmcgreevy 2 года назад

Great video of baord and batten. Still don't understand why people paint brick and stone.

@SimonSaysDIY 2 года назад

Thanks! I guess it is a preference. The brick used for our house was a really dated color for back in the 60s. It looks old and dirty. Thanks for watching! :)

@lonnieclemens8028 Месяц назад

I see that this video was made 4 years ago. Now I am wondering how that plywood has done throughout the years. Are you exposed to extreme weather conditions such as cold and snow in your state? Thank you

@SimonSaysDIY Месяц назад

It’s still holding up really well! We live in a warm climate that only gets snow once or twice a year but we do have extreme heat and termites but this has held up really well so far.

@juniorporras1508 2 года назад

We are buying a house. I done a lot of renovations to our house. I have the back garage covered up with 1/4 plywood. I wanted to just put the trimming on it, but I was worried that it will still rott

@andrewperales3670 2 года назад

Great Video IS THEIR ANOTHER WAY TO INSTALL WITHOUT THE ADAPTERS TO THE FASCIA . I AM PURCHAING MATRIEL AT LOWES AND THEY DO NOT HAVE THE ATTACHMEWNTS TO THE 5IN VINYL GUTTERS

@AlexGray 2 года назад

Great video! So once you had the addition framed and studded, you put plywood up against it, then wrapped it in the house wrap, and then the plywood for the board and batten? I’m new to this. I always assumed the board and batten went directly to the studs and didn’t realize there is another layer of plywood beneath that as well as the house wrap. My house is older and doesn’t have the wrap and just realized this was a thing. Thank you

@SimonSaysDIY 2 года назад

Good question. The house wrap is a fairly new development as my house that was built in 1966 and it doesn't have have a house wrap on it. The wraps help seal any moisture that makes it through the first layer of siding. It also protects the projects and repels rain if the siding doesn't go up right away. From what understand, the first layer of sheeting is standard no matter what type of siding you end up using. this first laying of sheeting is important to the structures strength. Most types of siding need that first sheeting layer in order to mount to as well. This type of board and baton uses full sheets so it seems redundant but should be standard for any residential buildings. Thanks! I hope this helps :)

@symcardnel1741 2 года назад

I don't think the guy answered your question which happened to be the same one I had. After rewinding the vid a couple times I believe he has his 2x4 framing, then he has 1/2 in. x 4 ft. x 8 ft. Foam Insulation Board, Then he has the vinyl house wrap, then he has vertically installed 1/2 in. x 4 ft. x 8 ft. CDX Plywood as opposed to installing it the correct way... horizontally.

@symcardnel1741 2 года назад

@@SimonSaysDIY After rewinding the vid a couple times I believe he has his 2x4 framing, then he has 1/2 in. x 4 ft. x 8 ft. Foam Insulation Board, Then he has the vinyl house wrap, then he has vertically installed 1/2 in. x 4 ft. x 8 ft. CDX Plywood as opposed to installing it the correct way... horizontally.

@paulwagner9264 2 года назад

Did you prime batons before installing

@AlexGray Год назад

@@paulwagner9264 I did Hardie plank and bought Hardie battens which come primed and ready for paint

@TheSateef Год назад

what plywood did you use? do you have a lowes or home depot link? thanks

@BraddLaRocca 19 дней назад

What is behind the wrap? Others have asked as well, can you pls clarify. Thanks

@tcb069 4 года назад

dang , great idea,using the ply i am going to use that on small off grid cabin i am building , save $$$ thanks

@SimonSaysDIY 4 года назад

Thanks! I'm glad it could help!

@feralbigdog 3 года назад

i have questions sir, how far apart are the battens? do you just measure from the end and each one to get them placed or do you use a level on each and every one? how do you know you are hitting the studs with that?(is the inside of the room not insulated or drywalled yet?) where the plywood boards meet top to bottom why did you not install z channel?

@donnahubscher7995 3 года назад

Good questions...

@truthserum5202 4 года назад

It's strange you didn't trim out the window with a trim the same size as your corner pieces. And, it's now "weather tight" until you finish the joists underneath. And I'll offer this. There's absolutely no need to cut a 45 degree miter on joints. A 22.5 degree miter is just fine. Pro Tip: Always pre-prime the back side of all Bats and prime all joints before you install those particular Back priming extends the life of the wood. Bats. Pro tip #2: prime everything before you do the caulking. Then it's much easier to caulk a painted surface than raw wood.

@SimonSaysDIY 4 года назад

Thanks for the tips!

@mottkr1 2 года назад

Bro use hardie board. All that work and it’s going to have to be replaced in 10 years at best. No flashing and seams like that, you could get 50 years out of proper job. With that said, if you going to do a quick flip and don’t care about long term, or it’s a tiny area like you did and you don’t care about ripping off and re doing every ten years then plywood is an option but always use flashing with proper joints and I would highly recommend rain screen behind board

@SimonSaysDIY 2 года назад

Thanks for the tips! 😄

@terrycain3843 Год назад

I’d rather paint every 5-7 years than replace every 20 -30 with vinyl.

@M4L1CH43 2 года назад

I'm wondering how this has held up now that it's been over a year? This video is the first search result on to RU-vid for board and batten. It's also the only video using full pieces of plywood rather than 10 to 12 in boards with 1/4 in spacing that gets covered with the bats. I imagine using full pieces of plywood will cause warping and twisting and pulling out the nails.

@SimonSaysDIY 2 года назад

It has actually held up really well so far. The nails held really well and only warped is one small area but with 2 more nails the issue was fixed. I think the key to this working is having it sealed from moisture with a few coats of paint. over all really happy with it. :)

@cityfiedredneck6841 Год назад

Looks good. But you will have issues when (not if) moisture gets behind the plywood. Some half inch strips mounted under the ply to create an air gap to allow moisture to dry would have added years to it.

@felipebarcelo811 3 года назад

Can I use plywood as battens?, and can I use battens horizontally on those seems?

@SimonSaysDIY 3 года назад

Yes, I imagine you could use plywood for the battens. Solid wood will probably hold up better for long term as the thin strips of plywood may peal apart over time. I have seen the horizontal battens to cover the seams before. I would just recommend cover the seam with caulk and then along the top of the horizontal board too as this board may catch rain water. Hope that helps!

@TT-mk8tw 8 месяцев назад

Did you have plywood before you install the wrap? So you installed plywood then the wrap then exterior plywood?

@ihavethreesons21 3 года назад

Great video and exactly what I needed. Is the 1x4 moulding rated for exterior? I am having so much trouble finding something rated for outside.

@SimonSaysDIY 3 года назад

Thanks! Yes, the 1x4s are pine boards that come painted white. These can be used for internal use as well as external. As long as you put a good coat of paint over all the wood to seal it the pine 1x4s will last. Keeping it sealed and dry is key.

@funnybunnies1724 Год назад

Is it ok to use cdx sheathing for the board and batten if it's caulked and painted?

@SimonSaysDIY Год назад

It’s been up quite a few years and haven’t had any issues.

@benignocruz8626 3 года назад

Looks nice , how far a part does the the battens are?

@SimonSaysDIY 3 года назад

Thanks! the plywood is 4 feet wide, so the battens need to be on measurements that multiply to be 4 feet equally. Centering the batten on 8in, 12in, or 16in marks will work perfectly to cover up the joints in the plywood. I hope that helps! We used 12 inch marks and centered the battens on those.

@henryostman5740 3 года назад

would have used Z channel between top panels and lower panels, caulk won't work over time.

@SimonSaysDIY 3 года назад

Yes, I’m going to keep an eye on it. But a z channel is a good idea. Next time I will use it. Thanks!

@josiemutch3036 Год назад

What does the z channel do. what would you use instead of caulking? Sealant maybe?

@angelly833 4 года назад

Like 👍

@SimonSaysDIY 4 года назад

Thanks!

@chrislane4677 3 года назад

Looks great man!! Did you just caulk the vertical seams also?

@SimonSaysDIY 3 года назад

Yes we did, its not as crucial because the battens cover up the seams if spaced right. however its good to be safe and use a bead of calk anyways.

@rebeccagroessler8403 2 года назад

Can you make the board and batten before you put it on the house to do the painting of it?

@SimonSaysDIY 2 года назад

I imagine you can. But it may be difficult when there are obstacles to work with like windows. the main benefit to building it on the wall is that you can make sure each batten is staying plum vertically even if the plywood isn't.

@feelinfine1973 Год назад

Great upload!! Well done and very informative!! Just curious as to why you didn't just frame in the lower part to the basement? Like a little mud room area or whatever? ✌️ from Iowa!!

@SimonSaysDIY Год назад

Thanks! 😄

@SimonSaysDIY Год назад

I actually wanted to but mentioned it to my wife and she didn’t like the idea. However at any point it would be pretty simple to close it in if we change our minds.

@feelinfine1973 Год назад

@@SimonSaysDIY Absolutely!! Oh and "happy wife = happy life" right? Lol thanks again!

@Denis-bo8ms Год назад

1. Why didnt you center the window? 2. Why didnt you put trim around the window?

@bigalshomestead4999 2 года назад

What thickness if plywood did you use?

@SimonSaysDIY 2 года назад

We used 1/2 or 5/8 inch exterior plywood. Thanks!

@jl7457 4 года назад

Do you have a materials list?

@SimonSaysDIY 4 года назад

Here is the materials we used. 5 - Sheets of 1\2 exterior grade plywood 2 - 1lb. Boxes of 2in galvanized nails (mounting plywood) 25 - primed 1x4x8 (for battens and trim) 1 - box of 2 1/2 inch finish nails (Mounting battens and trim) 2 - tubes of exterior calking

@davidrawlingson5952 Год назад

Why wasn’t the window centred?

@GerriWitthuhn 6 месяцев назад

There is no drainage layer behind the plywood...

@themodifiedlife2774 3 года назад

What measurement did u rip the 1x4 to?

@SimonSaysDIY 3 года назад

the boards are slightly smaller that 4in but I just found the center of the board and then set the table saw to cut the center of the line. I believe is was close to 1 7/8in wide for both sides.

@ronlaverdiere Год назад

@@SimonSaysDIY A 1x4 is 3.5 wide. So half is 1 and 3/4. Minus the kerf of the blade, probably about 1 and 5/8 per side.

@marstru1498 3 года назад

Hi. What is under the moisture barrier? Is the sandwich, plywood, moisture barrier, plywood and batten?

@SimonSaysDIY 3 года назад

We first put chipboard sheeting over the studs to frame it in. Then we used Tyvek house wrap or moisture barrier. this is in case any moisture manages to get behind the board and batten. Then we put the exterior plywood and battens on top. Then sealed it with 2-3 coats of exterior paint. I hope that helps.

@marstru1498 3 года назад

@@SimonSaysDIY Your're the man, thanks.

@manuelitowheeler7310 3 года назад

@@SimonSaysDIY I wonder if you could eliminate the chipboard?

@SimonSaysDIY 3 года назад

@@manuelitowheeler7310 I wouldn't recommend it. The chipboard is part of the strength of the structure. The thin plywood is only meant for a siding on top of the chip board frame. However, with that said there are some applications such as sheds, barns or small garages that may be fine to only use the plywood. For houses I would recommend both. Hope that helps! Thanks!

@larissacarrillo1645 3 года назад

My mother is currently looking to board and batten her newly completely gutted and remodeled home. I didn't know you could leave plywood exposed like this. Every diy that I have seen, if using plywood, they cover it with another wood for siding. This looks great but will it hold up over time?

@SimonSaysDIY 3 года назад

Some plywoods are meant for exterior use like the one we used. Plywood like this is used for framing in the fascia and soffit all the time. This can work for siding and last a long time if you keep it sealed well with paint and the area stays relatively dry. With an overhang from the roof and gutters, it is shielded from most of the weather and stays dry.

@chabella7320 2 года назад

How thick of a board do you need?

@SimonSaysDIY 2 года назад

1/2in exterior plywood and the battens were 5/8in.

@laurennn3825 3 года назад

Any problems with carpenter bees? I know they love wood 😞

@SimonSaysDIY 3 года назад

Thanks! We actually had some issues with carpenter bees on our deck right beside it so I filled all of the holes and put up several traps and it took care of the problem. I haven’t had any issues with the bees getting my new siding but I think the key is to paint it as soon as possible. Carpenter bees will avoid painted surfaces for the most part

@wagnerrdtradingpostonebay8934 4 года назад

No flashing ??

@SimonSaysDIY 4 года назад

The plywood was so thin that on the seam we just filled it with exterior calk.

@wagnerrdtradingpostonebay8934 4 года назад

@@SimonSaysDIY z flashing

@danwalker2642 3 года назад

No Z-bar where plywood joined at the ends?

@SimonSaysDIY 3 года назад

No we didn’t use it. Instead we sealed the backside and the joint with caulking. Honestly this wont last as long, you may need to recaulk the joint after several years. But it looks so much better than the z bar flashing. As long as you keep the joint caulked and the plywood painted it will stay dry and last.

@danwalker2642 3 года назад

@@SimonSaysDIY Your building inspectors must be more tolerant than where I live. I could never get away with that.

@Disturbedman911 7 месяцев назад

Should’ve used a Z bar

@jerseyscaler445 3 года назад

What type of boards did you guys use ? Doing the same thing . Pine sanded sheets ? 1/4 inch ?

@SimonSaysDIY 3 года назад

We used 11/32 plywood and then primed pine 1x4's for the strips. heres the link for the plywood we used. www.homedepot.com/p/11-32-in-x-4-ft-x-8-ft-Rtd-Southern-Yellow-Pine-Plywood-Sheathing-112590/100003677#product-overview

@bowillie911 2 года назад

Did you add Z channel?

@SimonSaysDIY 2 года назад

I did not, I don't really like the look of Z channel right next to the porch at eye level so we sealed the joint with caulking instead. This placement doesn't get much moisture and as long as we keep that joint sealed its fine. We haven't had any issues but I would recommend using Z channel. Thanks!

@stewscuda 4 года назад

No Z bar flashing????

@SimonSaysDIY 4 года назад

No, we didn't want the seam show that much. We filled the gap and behind the sheets with calk to seal the joint.

@user-iv6ty3cd5i 8 месяцев назад

What’s Mbo?

@samnickerson9255 2 года назад

That is NOT Board and Batten. At best Faux Board and Batten. Board and Batten is named for the vertical wider boards, with thinner battens covering the gaps. Looks nice tho.

@manneres Год назад

Don't skimp on the cheap caulk my man! You're going to be re-doing that every 4 years. Also, that does not look like exterior ply and you need to put some type of rainscreen behind your panel even when using Hardie (the correct product for this application)

@kid3946 2 года назад

Yeah now when sell that home later especially the new owners will be uninsureable and not inspectioned or licensed contractor

@boohoo4016 2 года назад

One look at 8:36 - and it just screams "THIS IS PLYWOOD". Sorry man.

@SimonSaysDIY 2 года назад

Thats alright :) Thanks for watching!

@user-iv6ty3cd5i 8 месяцев назад

So what? Still looks good

@andresjimenez4697 3 месяца назад

Wow I’m sure that is not the best ideas to give homeowners for a house maybe good for a shed… 😂

@sevidg 2 года назад

So many things wrong here. Fuck I’m shocked.

@Austin_Pate 2 года назад

Not worth the time to watch 😕

@SimonSaysDIY 2 года назад

Sorry to hear that. Thanks for the feedback! :)

@SkinnyBoyFatt Год назад

But it was worth ur time to post a comment…Brilliant ;)

@wastedShaman Год назад

This will not last. Painted plywood, with caulked batons? What's up with the door that barely clears your exposed joists? 😢 Stop making videos.

@SimonSaysDIY Год назад

Actually as long as you keep it sealed and painted it last perfectly fine. So far, 4 years later, there’s no issues. The floor joists underneath was insulated and sealed up right after this video. The basement that was built in 66 has 7 foot ceilings so that explains the door at this height.

@delaman4991 Год назад

You did all that then left a gap in the plywood, looks bad and lets moisture in, get 10ft sheets mbo ply it is smooth finish and if you need a break use horizontal straps then start vertically again after the break. Also you need to use the same batting or wider round the window so it looks finished properly. This wasn’t a great tutorial. Also put straps under the ply not straight on the sheething ply and out some ridged insulation in between