DIY Bubble wall | easy colourful LED water bubble wall | JOY in DIY 

I used your information to build a wall 24 inches wide and 48 inches tall, your information was extremely informative, thank you. I found the design has a couple short comings I think I have fixed. The first is that the recommended air-stone does not give a consistent bubble pattern, some chambers had larger bubbles than others. I changed to a man made air-stone (TOP FIN BUBBLE WALL) is the brand which has very consistent bubbles. Second the design does not allow you to fill the chambers to the top with water, because bubbles rise up several inches above the water level and spill over the side leaving everything wet. I glued a plexiglass strip to the top making a cap and sealed it air tight. Then I drilled small holes .060 diameter in the cap centered on each chamber. This allows the chamber to breathe and does not allow the burst bubbles to come out. Additionally, I drilled one larger hole on each side of the new cap big enough to allow filling and put a plugin the hole that has a small hole to allow the plug to breath. This allows the water level to be within one inch from the top without bubblles spilling over the top. Last comment is GOOP brand clear adhesive seals everything peerfeectly without the needed to use any other adhesive. It is readily available in big box stores or on line. Thanks again fun project to build.

I love the waterfall wall. This is exactly what I want for my bedroom. I'm doing a forrest theme with a waterfall. Thank you for this video.

Very Cool Idea. Thanks for Sharing.

Brilliant!!! I always wanted a water panel, but they are so extremely expensive... This is the perfect solution, thanx a lot, its beautiful!

Looks like a beautiful display piece! How loud is the air pump? I'd love to build something like this for my room but I don't want an annoying buzzing going all day

🙏सरळ आणी सोपे आहे ताई💐

Hi joy i have a question?...u didn't sealed off the top what if i have to seal the top..how can i do it? As i am making for ganpati decoration

Wow now that's true beauty love it so cool ❤❤❤😂😂😂

This is excellent! Be careful with that M seal though, I don't know anything about that product directly but it seems very similar to other 2 part putty and typically you must handle those with gloves for safety! Any other viewers might wanna double check the package just in case!

Very very good work 💥it

Wow beautiful I love this...

Awesome design and concept. I have a question in mind, how do we connect the led strip wires and from where do we get power, please show any videos how to connect and complete the circuit. Thankyou

Thank you very much for sharing your ideas

Hats off to all your efforts.

Excelente trabajo , nada laborioso felicidades desde Guadalajara Jalisco México.

Beautifulllllll🙏🙏🙏🙏❤️❤️❤️❤️❤️❤️❤️❤️❤️ Love from Karachi Pakistan ❤️❤️❤️❤️❤️❤️❤️❤️

Nice work, hey where i can get polycarbonate sheet. Please share me the link

I could watch it for hours

Very nice 👌👍👍

Genius... but one question on my mind... when the waters get dirty and causes algae for long period... how to wash it?

Zabardast, mind blowing

This is so cool work. I am going to try this soon👍

Nice information than others video about bubble wall Awesome work My requirement is of 10.5 inch air stone of 10 inches is not available suggest me if you have any idea

Wonderful 💎💎💎💎💎

Очень Красиво!!! Look

Look very nice, just wondering... can you make the bubbles in a bigger size?

op build very satisfying

Hi...it's an amazing work...it looks beautiful...I want to make, just assist me with few things. Can I make it 5 feet(height) by 7 feet. And if I have to buy locally where to look. Thanks in advance.

Can you tell me the size in square feet you have used polycarbonate sheet for the bigger bubble wall you made? Please do reply...thanks in advance

Can i connect 2 air stone together 24inch &24inch

It looks nice. I wonder if you can use oil instead of water?

Awesome work

Nice 👍 I am planning to do and I want to know what is the sheet thickness you used for this work ..?

Absolutely love your creativity, I'm so glad I found your channel. Will recommend it to my family and friends, we are all crazy DIY people :)

Wow nice creative lamp.thank you for this tutorial👍👍👍

Hi can I make 6feet x 1 feet wall using same material mention in description or should I need anything extra? You wall looks very awesome

Sema super sir well dome

Look so NICE and BEAUTIFUL... How strong is that AIR PUMP to get all those bubbles up? 40 gallons, 60 gallons, or 100 gallons pump?

wowww.. nice! I will try mine.. but I saw in the end you got big one, where can we buy this sheet? so cool so great! I am from Brazil. I got doubt too... After to use in the bottom the air stone all pressure of water wont make it go out?

Best video

Super

Thanks, I made 2 pieces of 24×36 inches

hello JOY in DIY! i have discovered your channel today and all the work you have done is really worthwhile to watch. but i have a question! im building the same thing but for a size of 5X5 sq ft area. and the air stone is of only 12 inches!! is there any way to extend air stone?

Wow superb frnd

Awesome 👍💐⭐🤘

Thanks for the information you shared.. it's nice .. from do I get polycarbonate sheet?? Link pls. ..

Nyc Akka..👍

Beautiful 😍

Thanx for this video

Quedó superhermoso. Tengo dudas.estamos haciendo en casa uno igual.usando policarbonato igual.las medidas son 1.50 de alto y ancho 78 cm.mi pregunta es a que altura maxima debe estar la bomba de la manguera.pq lo pusimos 2metros separados y echaba pocas burbujas y de pronto solo echaba en el medio por un solo hueco.favor responderme..

Great and informative video. Thanks for sharing. Could you confirm how much it will overall cost and time to built this? And man power too?

Question can I use mineral oil instead of water? Also can a small table top one be made? Thank you for the fantastic demonstration...

Thank you for this great job. Can I use alcohol as an alternative to water because the water will become algae in it after a period of time?

beautiful, but made with crooked hands, it will do for a garage

Kitna kharcha aata hai? aur samaan kahan par milega? Looks beautiful

Wow

It's awesome, I will also try it. Btw, why didn't you fill the water upto the top in the bigger one??

I wanted to build same for 3x3 ft wall. U used bubbler as air stone but if for 3 ft do you have any suggestion? And after some days air stone may get block due to water impurities so how can we replace ?

So nice

Super sir ji

I wanted to know the name of the material that you did this waterfall instead of getting glass, and whether it was plastic material or not, instead of glass.

Yea i have only the screen making and self a airstone from a plastic pipe and hole making in a pipe but his bubble not in any hole i think i must a Tpiece for more power is that wy you doing a Tpiece on your air pump?

Grt wrk! Hw u got poly Carbonate sheet from ajjio.bcz minimum order quantity is 150ft....can u pls let us knw

Sir please help me initial stage while I am sticking M-Seal and polycarbonate sheet, water is not holding...shall I use araldite over the m seal for leakprofing

Sangat keren lampu hiasnya.

Very good work, appreciate it. How can we cover both side portions of polycarbonate sheet to make it look attractive and hide the Led that I am planning to place vertically. Will be great if you have the online link for same.

I've made the same model with sheets of 1 feet after applying mseal and araldlite still leakage is happening idhar navratri ke 9 din baad bhi hoyega ki nhi bhaya

I just have a question. So if you turn off the power how the water will run back the blower or no?

I'm planning to do a 6ft x 9ft version of this...... I'm living in a temperate climate country, Does the polycarbonate sheet easily gets dirty or yellowish in a few months? Pls I need an honest answer before doing this project and thank you in advance.....

This is a good project. I just want to ask if the bubble wall will develop an algae by time? If so how can I prevent it? Thank you :)

Wonderful idea

Hi it's really good but water not leak in the machine side and how much cost it is

absolut wonderful

beautiful 👍

Small dbt mseal u have used only one side to stik or both sides?

Brother can we use glue sticks with glue gun instead of m seal on stone filter please tell means to stick carbonate sheet with stone filter can we use glue gun glue

One question in mind what happen if we switch off the airstone water will reverse to air pump and damaged it or something else kindly reply

Amazing

Hello where can i purchase the polycarbonate sheet both online and offline need this bubble wall for ganpati decoration thanks

I want to know how much they cost

Really nice video but where from I can get polycarbonate sheet? Please suggest.

Kya isme har bar pani change krna padega

From where i can buy polycarbonate sheet plZZ help bro

Hello ! If I may ask is it possible if I buy one from you?and for how much? I want the one that stands on the floor

But where do you get the main thing - the polycarbonate sheet?

I want 32 inch air stone & Good quality..plz help sir

Multiwall polycarbonate sheet is not available on Amazon India. Do you suggest any other site from where it can be ordered? Do you have any idea of shops selling it in Mumbai/ Thane?

If polycarbonate sheet is not available then can we use simple acrylic sheet ?? If yes then mention the size plx

Stones you can keep side by side

May I get an advise from you... I tried and tried but It's seem like NOT working. Only the 1st couple holes would have bubble up and the rest... NOTHING. I use the 60 gallons pump and also try DUAL AIR PUMP too. What's wrong? What did I miss? Please give me a helping hand to finish my project. Thanks A Million

I made the bubble wall doing exactly what you did. However, I am getting a lot of bubbles which turn into foam on the top and way up which spills out of the top. Do you have any ideas on why this is doing that? Thank you!

I have self made a air stone from a nylon pipe but his come not far the bubble i do know how that can i 43cm long with my pipe

Can u me build 6x10 outdoor glass water falls

Fantastic

wowwwww nice.

Very nice and total cost ?? Plz reply

Hi. Can I use 16mm polycarbonate for this? It has 2 chambers instead of 1?

Have you close the top holes??? please replay me

awesome :)