DIY C-130 Hercules RC Plane Keeps Flying with 3 Engines 

This is the biggest RC model plane that I ever build and fly. The wingspan is 3000mm or almost 10ft. Use almost entirely 5mm foam board as the build material. In this video also the first time I made propeller spinners with 3D printer, and make foam wheels and firewall with laser cutter. I use Creality Ender-3 V2 Neo for 3D printer and 10W CR-Laser Module to convert Ender Printer into laser engraver and cutter. Those tools help me alot and I got best results. I also 3D print some of detail parts, I will share all the STLs along with the plans and decal when they are ready, please wait about a week for the files to be ready, but I hope it will be sooner.
Supported by PT Astragraphia Xprins Indonesia (AXI)
Creality Brand Exclusive Distributor
for more info, please visit
Website: bit.ly/3DPrint...
Social Media
Instagram: / 3dprintingsolution.id
Facebook: / 3dprintingsolution.id
RU-vid: / @3dprintingsolution
Buy 10W CR-Laser Falcon Engraver
in Creality Store:bit.ly/3JotDrc
MAZBRON RC for aeromodelling parts :
www.tokopedia....
shopee.co.id/m...
PDF Plans, STL files and build instructions :
paper-replika....
Join this channel to get access to perks:
/ @juliusperdana
Specs :
1. Wingspan 3000 mm / 118 inches
2. Flying weight : 4800 grams/ 169.3 oz
3. Wing loading : 47.8 gram/dm2 - 15.7 oz/sq.ft.
4. Wing cube loading : 4.8
5. Wing Area : 100.43 dm2 / 1557 sq.in.
6. CG : 11.5 cm / 4.5 inch from leading edge
Electronics
- 4x DXW 3536 1200kv
- 2x 80A ESC Hobbywing Skywalker
- 2x 50A ESC Aerostar
- 2x Battery Lipo 3S 2200mah
- 5 x 9 gram servos (metal micro servo)
- 1 x standard servo (steering)
Prop :
- 10x6x4 inch props
- 58mm 3D printed spinners
Materials :
1. 5mm Foamboard/ Depron/ Polyfoam
2. 2mm Plywood
3. hot glue, UHU glue, CA glue
4. wax paper
5. PLA Filament