DIY CDI Unit for Ignition Boost 100% guarantee

Подписаться 2,7 тыс.

Просмотров 18 тыс.

50% 1

Discover the Ultimate Homemade CDI Unit for Ignition Boost,
Hi my friend's, this is a one of the best circuit about ignition boost...
in this video i make different electronic projects In this video you are also learning electronic and how to make PCP boards And electronic circuits...
we have the best circuit of the CDI box
For motorcycles and small petrol engines
Best CDI unit box Ever Made How to make a DIY CDI unit box (AC version)
if you have a weak problem in ignition your motorcycle spark plugs,try this one
this is an extra future version of the CDI unit box multi spark.
for a mini drill And vise ,You can watch the videos below:
• Discover How to Create...
• How to make a Minidri...
• Making A Mini Metal Vi...
✅
list of All parts:
c1.c2: mkt or polyester capacitor:275 v-680 v/1.0 UF
c3:10n/c4:100n/c5: electrolyte capacitor 10uf 50v
resistors:R1.R2: 1meg /R3.47ohm/R4:1k
Diodes: D1_D3:5408
D4:1N4007
MOSFET:BT151
NTC:any Thermistor
⚠️ diagram And PCP design:in video please watch it
‪@MrWolfDiy‬
#diy
#homemade
#electronicproject
#boostign
#PCPboards
#CDIunit
make sure you subscribe to the channel to don't not miss the next videos
thank you for watching
If this video helps you, please like it🙏👍❤️

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 64

@MrWolfDiy 8 месяцев назад

Full diagram in video, please watch video till the end

@stefanmikoczi9164 Месяц назад

Mosfet ? Thyristor BT 151.

@MrWolfDiy Месяц назад

That's right, there was a mistake in the writing, good luck

@Hiranthaperers 18 дней назад

I can't make this board. So can you give me another option please 🙏

@MrWolfDiy 18 дней назад

@@HiranthaperersTo make this CDI, you have to connect the parts according to the diagram, and I can't think of any other option for now but; In this video, I explained how CDI works in practice, maybe it will help you, I will explain this in more detail in the next video, I am at your service if you have any questions 🙏 👇👇 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ej7AXRHle4g.htmlsi=emnIb4GpcBhsZA0x

@sinacdi 9 месяцев назад

I build it it's working well❤very nice thanks for video

@MrWolfDiy 9 месяцев назад

Thank you, the special version of this circuit will be posted on the channel soon, subscribe to the channel so you don't miss it .🙏❤️

@ravijayasundara-eu9gf 8 дней назад

Dear brother, thanks for your videos and explanations. Could please explain little bit about cdi spark advance mechanism..? Thanks

@MrWolfDiy 8 дней назад

Hi and welcome, Advancing the spark timing in this CDI is limited, but it can be changed by installing a separate circuit (I may explain in the future). I have already posted the practical and more detailed test video of this CDI. You can see it at the end of this video from the link below, maybe it has something new for. Thanks you.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZtO5bJKMQG8.htmlsi=Nxg44Qys-8bNgt90

@Sujiatmoko Месяц назад

Cooolll.... Great job, Mr. Wolf... 👍👍👍

@MrWolfDiy Месяц назад

Thanks friend 💖🙏

@stefanpejak9131 Месяц назад

One small correction, BT151 is not a MOSFET. You really confused me there for a second😅. But great job!

@MrWolfDiy Месяц назад

yes that's right it's a Thyristor,It was a typo, thanks 🙏

@usrm-wm1osbr5v 10 месяцев назад

Nice. Can you make rectifier (RI) for bikes ?

@MrWolfDiy 10 месяцев назад

Thanks,There are several types of rectifiers, I will make a special type soon, what kind of bike is yours?

@warrenpeas 6 месяцев назад

@@MrWolfDiy rectifier and cdi for honda grom

@MrWolfDiy 6 месяцев назад

@@warrenpeas I need to see the type of engine, take a photo of the engine, rectifier and CDI fabric and send it to my email, so I can see what type it is.

@warrenpeas 6 месяцев назад

@@MrWolfDiy this is the engine. It is very popular. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WMXoY6YtzUc.htmlsi=aaIpyMu7zrVUoMbE

@MrWolfDiy 6 месяцев назад

Hello, dear friend, I saw the video. If the stator coil has a black wire with a red line, your motorcycle's electricity must be AC. You can use this CDI, otherwise, making a DC CDI is a bit complicated. But soon I will put the new version of CDI reinforcement. About the rectifier I recommend using the original rectifier،Good luck

@Circlotron 2 месяца назад

Now that you have plenty of voltage available, open up the spark plug gaps to 1.5mm or even 2mm. Will run a little bit smoother at part throttle. Probably no increase in power though.

@MrWolfDiy 2 месяца назад

I tried it earlier, the initial acceleration of the motorcycle has increased a little and it bites smoothly🙏

@callofwind 10 месяцев назад

I have a vintage dirt bike can I use it I have problem with my ignition

@MrWolfDiy 10 месяцев назад

Yes 👍 you can use it for any petrol ac engines

@MrWolfDiy 9 месяцев назад

Yes you can use it for any petrol engines AC ignition

@omofolarinnoble3598 5 месяцев назад

Can you design for car ignition system?

@revgamarea2310 10 месяцев назад

So much current drawn by the eht (ignition coil) can damege it

@MrWolfDiy 10 месяцев назад

Hi (just for information) special capacitors are used inside the Japanese units, I opened the Japanese example of Shindingen company, the current is much higher than this unit, but it does not cause a problem, this standard CDI unit is just for replacement

@jeromelargo9861 16 часов назад

Can i make like that?

@MrWolfDiy 14 часов назад

Of course you can, note : that this is for motorcycles with AC power, if you don't know what kind of electricity your motorcycle has, you can watch the new video, in addition, I made version two of the CDI, which is much easier to make, and It will be published soon, 🙏

@martinduplessis7105 8 дней назад

good day my friend, is it possible for you to make a cdi for a 4 cylinder 750 cc. please let me know

@MrWolfDiy 8 дней назад

Sorry, I have no idea what type of CDI is required for operating a 4 cylinder engine, so not sure how the above circuit can be made, usually the CDI circuit of multi-cylinder engines is very complicated and its manufacturing technology is not in the hands of the public. , and only some companies like (shindengen) make it.💓🙏

@martinduplessis7105 5 дней назад

@@MrWolfDiy Thank you for the reply I appreciate it. best of wishes

@MrWolfDiy 4 дня назад

@@martinduplessis7105 good luck bro💗🙏

@KasunSamarasekara-ld8ms 6 месяцев назад

Well done ❤, can i know whether this circuit support for ignition advance also ?

@MrWolfDiy 6 месяцев назад

Hello, thank you, I must say that version is a replacement to the original CDI of the motorcycle (ac) and is used to boost the ignition, and the advance of the ignition depends on the type and volume of the motorcycle and its RPM, but In total, it is limited, I am making a new and special version, it will be published on this channel as soon as it is ready. Thanks for watching

@nava-kit 9 месяцев назад

can you share diagram

@MrWolfDiy 9 месяцев назад

Hi Watch the video till the end, the pcp design and parts are shown in the video.❤️🙏

@tharukameegasthenna6581 23 дня назад

Can i use this for serrow 225

@MrWolfDiy 22 дня назад

Hi welcome, I think the CDI of yamaha serow is DC, But again, check it yourself, if it was AC, it would be fine ,the DC version will be released soon.

@rosernick1976 3 месяца назад

Hello my MrWolf, where's the DC version of your CDI? I checked your videos there seems to be none, If none, Is this AC CDI version of yours usable to a DC-stator coil? Thanks, If yes, I will build this one instead

@MrWolfDiy 2 месяца назад

Hi dear friend : I made the DC version but it didn't work properly, that's why I didn't publish it for now to do the final test. Your second question: But ac cdi can't be put on a motorcycle with a DC coil, unless you change the flywheel and coil to AC. If you have a problem with starting the motorcycle, you can ask your questions, at your service; thanks

@aboamina695 9 месяцев назад

Where is the circuit diagram please?

@MrWolfDiy 9 месяцев назад

dear friend, watch the video till the end, the PCP circuit is included in the video,don't need anything else.🙏

@mylgf400l2 3 месяца назад

i made it but coudnt work well. it may be my circuit fault. could you give me more clear diagram of it because the diagram in video is nor much clear.thank you

@MrWolfDiy 3 месяца назад

No problem , Tell me where you have a problem and I will guide you,🙏

@bhewokchannel9310 Месяц назад

ntc type ?

@MrWolfDiy Месяц назад

Hi , I used a 500 ohm thermistor, But you can try other values. Good luck ♥️

@bhewokchannel9310 29 дней назад

@@MrWolfDiy ok thanks

@sorojnayak8569 8 месяцев назад

Can it advance the ignition timing how much degree can it maximum

@MrWolfDiy 8 месяцев назад

This CDI is to boost the ignition of ac motorcycles, the ignition timing depends on the type, volume of the engine and your RPM, you will probably face problems by changing the ignition timing. If you have any questions, you can ask.

@callofwind 10 месяцев назад

And this is a AC CDI box or DC?

@MrWolfDiy 10 месяцев назад

It's an AC version in another video i make a DC version to❤️

@MrWolfDiy 9 месяцев назад

AC brother

@noeldelsol6304 2 месяца назад

Este video quisiera oírlo en español

@MrWolfDiy 2 месяца назад

Hello, dear friend, I can't translate the Spanish at the moment, but the full Spanish subtitle has been posted, I hope it will be useful for you.

@omofolarinnoble3598 5 месяцев назад

Can I get 1 for my car?

@MrWolfDiy 5 месяцев назад

No Unfortunately, it is only for motorcycles, 😭😭

@mohammedzakir8626 7 месяцев назад

Hi can u make CDI for me pleas

@MrWolfDiy 7 месяцев назад

Hi my friend, If you know a little about electronics, you can easily make it yourself using this video, but soon I will upload a new video about this(CDI) so that it will be easier for the public to make it,even you, and it will also have more spark power.(Super IGN)