DIY Collapsible Boom Pole with Shock Mount | $20 

In this, I will show you how to turn a Mono Pod into a collapsible Boom Pole with a shock mount for under $20.
You Will Need
Mono Pod - amzn.to/3bJRwcB
1/4 inch bolt
1/4 inch screw
1/4 inch t bolt
PVC Pipe
Rubber Bands
Step 1: Cut your PVC pipe to fit your Shotgun Mic.
Step 2. Cut 8 slits on each side of the PVC pipe
Step 3. Drill a 1/4 inch hole in the center of the PVC pipe
Step 4: Insert the 1/4 inches bolt in the hole
Step 5: tightening the 1/4 screw on the bolt
Step 6. Attached rubber bands in an x pattern on each side of the PVC
Step 7: Put your shotgun mic through the center of the rubber bands
Step 8: Attached the T-Bolt to your monopod - amzn.to/2Q2KeIB
Step 9. Screw the Shock Mount onto the Mono Pod
The Gear I Use:
Pixel 4 Phone - amzn.to/38zP0DK
Camera Nikon D7500 - amzn.to/3bJU0rs
Shot Gun Mic - amzn.to/3rHVLuM
Zoom H1 Recorder - amzn.to/2OqPPb2
Limo Studio Softbox - amzn.to/3rHVGY0
Gimbal Camera Stabilizer - amzn.to/3vjn7tk
Green Screen Kit - amzn.to/3eyjiud