DIY Deck Drainage System

Подписаться 490 тыс.

Просмотров 377 тыс.

50% 1

This DIY Deck DrySpace video is all about how to install deck dry space from start to finish. This DIY Timbertech AZEK DrySpace system is an easy way to have a dry patio right underneath your deck. Bring Your Own Tools (#BYOTools 168).
HUGE thank you to TimberTech for sponsoring this week's video. Check out their amazing product line HERE: www.timbertech.com/
Apparel List:
-Georgia Boots: bit.ly/3yZ4M6J
-BYOT Shirt: bit.ly/2T6l8dE
-Work Vest: amzn.to/3ge4jou
Material List:
-DrySpace: bit.ly/3AGz1Sz
-2.5" Wide ProTac: amzn.to/3zt5U3u
-4" Wide ProTac: amzn.to/3P0TR2X
Tool List:
-Drills amzn.to/2SbHzO1
-Palm Nailer amzn.to/2RvgW1A
-Air Compressor amzn.to/2IzBeEo
-Tape Measure goo.gl/nguoOO
-Speed Square amzn.to/2FrIuQK
-Contractor Square amzn.to/2TER2O5
-Table Saw: amzn.to/3pKHCgI
-Chop Saw: amzn.to/3PJWzKL
-Utility Knife amzn.to/2SsOToC
-Chalk Line amzn.to/3xSZjwM
BYOT News Letter byotools.me
BYOTee Shirts Available NOW! teespring.com/byotools
Instagram / byotools
Facebook / byotools
TikTok / byotools
MUSIC:
Min0:00 - Venice Beach: Topher Mohr & Alex Elena
Min14:01 - Pata Pata: Miriam Makeba (Matt Cherne Remix) www.chernebeats.com
#byot #diy #howto

Хобби

Опубликовано:

8 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 187

@cortneymullen9164 Год назад

I’ve been looking at a good system to get for under my deck and all other videos I’ve seen always seem to NOT show the reality of blocking or double joists situations we all face. Very nice video you did here. Great job and love how your project turned out.

@bachtam9161 Год назад

I read the entire Ryan’s ru-vid.comUgkxGqOCINHE0Z0E5gxzSdNi9NWGugRY5Hm2 Plans and was able to make a shed plan. Using Ryan’s Shed Plans alone, the shed itself is great. Where I wish I knew more is with respect to ground preparation and foundations. Maybe that's beyond the scope of Ryan’s Shed Plans.

@htownblue11 Год назад

Very cool system to highlight Brent. I never knew this was an option.

@dc5duben96 Год назад

great job i love watching ur videos always really informative & entertaining

@patrickmckowen2999 Год назад

Very nice 👍 Prior to me know about this stuff on my last deck I did a system using some strapping and vinyl siding. Worked well but I noticed over the years a build up a dirt and pin tree debris. Cheers

@pnowikow Год назад

I like it when people show their errors. Some channels make everything look perfect the first time

@posiguy 7 месяцев назад

Nicely done Brent!

@JustTheFactsYall Год назад

Thanks TimberTech I’ll see you soon 😁

@JustTheFactsYall Год назад

I’m about to do this! No going to say I haven’t done this with a tarp before 😂

@gustavofelipe5948 Год назад

Great video. One suggestion, add a piece of flat metal counter flashing to the rim joist as a splash guard before you install the gutter. This will keep water from getting between the backside of the rim joist and the gutter. Great clean job!

@blyatberry7036 Год назад

Great idea :D Great work!

@JustTheFactsYall Год назад

This is the best idea ever! Wish I knew why I always get the notifications a day late.

@daryushbagherzadeh5845 Год назад

Great job and video

@verygoodboy2688 Год назад

I've never heard of this. That's pretty cool

@BYOTools Год назад

Thanks for watching.

@azcrazy333 Год назад

This was super helpful! I'm curious if the joist spacing was narrower for the double and triple joists and if you needed to decrease the width of the v channels. My deck has joist extensions that go from double joists to single so I expect that's going to be tricky. Thx!

@jimbujold5586 5 месяцев назад

Wow, great work! Thank you so much for the pain-point tips (cutting, tool tips, soap, etc.). I have the same situation. I’ve been wanting to do something like this for a long time (and enjoy the outdoors, even though it’s raining a little). I think I’m finally motivated! PS: can someone please point me to an easy / simple ‘ Flagstone/ Pavers ‘ video?

@AnatolianOutdoors Год назад

Thank you for sharing🙏

@eszyx8062 Год назад

Amazing!

@JustTheFactsYall Год назад

I would love to know they value that you’ve added to your home with all these projects. The one thing I wonder also is will it pay off because your neighbors may not be up to speed like you which changes market cost.

@theglampman3785 Год назад

How can you monitor then wasp nests being built in this space?

@markdichiara9486 Год назад

This appears to be a great solution but I priced out my 11'X15' deck at Home Depot today. Over $1,600.00!! For some plastic! Either Home Depot or AZEK are insane. I will get another price but will never pay close to that.

@samu3813 25 дней назад

It's not about cost, but about what is the system worth to you. Plus, they probably don't sell these in high volumes which jacks up per unit price. But I agree, these things are way too expensive.

@henloco7513 6 месяцев назад

Meh there’s always someone who knows how to do it better lol. I know because I’m in Enid this people, however, this video it’s done properly where it gets to the point it’s definitely detailed, but it doesn’t drag you along well done, sir. Makes perfect sense how all the components work together actually, attempt something like this in the future. Thank you for sharing.

@webncyber Год назад

thanks for the video! Where did you buy this from? As their website seems terrible nothing is clear in terms of price size, how many comes etc...

@ThoughtIwasFishin 4 месяца назад

I had this system installed by a contractor and it looks great and works well. I have a few spots that leak at the gutter where the water doesn’t drip into the gutter, it tends to follow around the panel and misses the gutter causing a leak. It is especially bad during heavier rain. This same issue would be resolved with a drip plate, or panel, if it were on a house. Any suggestions on why this is happening, or what to do to stop it?

@spiroschristoforatos6016 3 месяца назад

Great set up, and I have something similar on my deck. I have some trees near the deck and the debris that falls between the cracks on top of the deck end up trapped in the corrugated material I have under the deck. Any suggestions?

@tylersmallman Год назад

I did the same thing using some stripping to create a slope and then screwed clear polycarbonate roofing sheets. Let's light through and kept me dry

@davidtady12 Год назад

it last pretty well?

@samu3813 25 дней назад

Fully dry? I can see debris getting stuck next to the joist and rotting out your joists over time. Reason being you don't have access to caulk the inside smooth due to the deck board above. There's a reason why these after the fact retrofit systems are as expensive as an arm and a leg.

@spicynomad Год назад

wow, i never knew something like this exsist. now i can stay clean and dry whenever i run to a deck for cover. thanks brent. i really should not be surprized though cause ive learned about other innovative things by watching you.

@BYOTools Год назад

That’s the beauty of this system. Thanks so much for watching and the kind words.

@spicynomad Год назад

@@BYOTools you are welcome!

@aaronellingsen5404 Год назад

Yeah, but he got all of this stuff for free. This system is stupidly expensive for what it is actually composed of. One 16' V panel is around 50 dollars. The hanging brackets are about 85 bucks each. That's 135$ PER joist bay, not including fasteners, tape, starter track and gutters. A 20' deck is going to cost you around 3 grand- and that's if you do all the work yourself....

@spicynomad Год назад

@@aaronellingsen5404 i dont care, aaron. im not a tradesman and i cannot get into those trade shows unless. youtube videos have some incredible videos of things that are practical and can solve real issues.plus you find out here whats on the market so you can ask for it.

@Mixwell1983 2 месяца назад

I have a dual layer deck, underneath the main deck os covered with corrugated roofing so it currently protects my riding mower. Im about to get another mower in a zero turn so my older mower needs to be relocated underneath the unprotected bottom part of the deck. This system looks nice but im not trying to spent a grip of money. Im thinking some cheap corrugated metal with a partial overlay and maybe using a 2x4 on one side to give me enough slop to drain water..

@manuelcastillo8472 Год назад

Love it 🫶🏻

@bigdocus Год назад

Thanks, great vid. I'm looking for something like this to use the area under my deck as storage. Although it looks like A LOT of work.

@wilbgecko3249 Год назад

Don’t do it!

@olliec1319 Год назад

@@wilbgecko3249 I did a bit of research, read some reviews and decided not to!

@celesteamaral5498 Месяц назад

What was the reason for not doing it?

@Moondoggy1941 Год назад

So this is exactly what I need to update my 30 year old wood lattice patio cover, we want shade and rain protection, my wife wants it torn down and have a aluminum wood patio installed instead. The wood is till good, it just looks rough, it needs to be painted, It was very expensive wood 30 years ago today it will make you sit down. What would you recommend for the top, out of site out of thought but it will still rot in the elements? The patio is 14' x 25', the stringers are dual separated by a 4" x 4" and three feet apart. Very typical patio. Thanks in advance

@ds-imok Год назад

Is there something similar to this but for a 2nd story outdoor balcony from neighbors shoving things through their cracks and overwatering their plants so that it floods below with dirty water?

@LitheInLitotes Год назад

Will you still be able to pressure wash the deck? Or will the channels comes blasting out?

@sventime 9 месяцев назад

love it! How many hours does it take you to install?

@jamilaanaanta6788 Год назад

So i have a piece of land covered with wood in my backyard. I took all the paint away with some tools because the wood was starting to go bad. Every two to four years I have to scratch the paint away and paint the wood again. Is there a way to make my painted wood last longer??? I live in a country where it snows. Thanks

@jimmyjones2681 5 месяцев назад

i need this in NJ order ready....

@daveydavis2398 20 дней назад

Great Idea, but 2 questions: How do you clean that system? I get loads of tree debris and jet ash coming down all the time. B. If there is a freeze can I expect the V- channel to fall in? Is the material all PVC plastic? Thank you.

@user-hu7cx9rq4p Год назад

Just screw corrugated iron under the deck. Cheaper, quicker and last 30 years. Also will not rot out the wood as you can put the rubber o rings on the top to separate the wood from the iron. Can still install the guttering as well.

@samu3813 25 дней назад

How would you slop it? A video would help. And I promise to like it.

@srsorbo Год назад

I just bought a home up in Skagit County. We have a carport with the roof that serves as a deck off our kitchen. Currently the deck is covered in a rubber membrane that is very soft in areas. The plywood underneath is obviously rotten. Ideally, I want to remove the membrane and replace it with a more traditional wooden decking. This product might be perfect for the roof of the carport, under the deck.

@samu3813 25 дней назад

I have a similar plywood membrane solution that has lasted over 30 years. Last time I recoated it was 15 yrs ago. Still no leaks. But it's not pretty like deck boards. Functional and underneath is completely dry. I have to pressure wash carefully every 2 years .

@PNWLiving1725 Год назад

Will a camp fire pit sparks and fire ash melt holes?

@j2sw263 11 месяцев назад

Great video! Now that you have had it awhile, how is it to clean? I am worried about the system getting clogged up.

@nobreighner 3 месяца назад

One case that had sloped corrugated roofing under the deck did get all messed up from tree debris.

@robertjohnson2537 3 месяца назад

What stops water from going between the joist and the panel but at the bottom of each joist? Seems like water would run between these two edges and be trapped at the bottom of each joist?

@vivianlong 4 месяца назад

How did you protect top of rafter under Trex board ?

@bigguix Год назад

the way your head moves, i'm sure you have ancestors in India ! :P

@BYOTools Год назад

does that mean my head moves fast haha?! Thanks so much for watching

@angellas.1314 Год назад

@@BYOTools it’s the head bobbing !

@tr3vorb438 Год назад

There’s a problem with trapping moisture that runs thru the decking, down the side of the joists and behind the combo brackets. This will cause accelerated rot of the joists. This is further exacerbated by any pine needles or trapped dirt.

@marcusmazza2255 Год назад

This is obviously the best solution without tearing up the deck… hindsight is 20/20

@matthewlewis4559 Год назад

I'm surprised he didn't run the tape along the top of the brackets, because I immediately noticed it's not flush with the joists.

@brettsurrett4596 Год назад

As with everything on a house ,there is maintenance. As with this system you will have to clean the channels. . Simply remove a deck board at the top if the deck and wash the debris out . Not difficult at all .

@jwt1035 Год назад

@@brettsurrett4596 Remove the deck board? Are you kidding me?

@jwt1035 Год назад

Totally agree with the OP. If they were going to install a system like this, it should have been upside down with the combo bracket on top of the joist prior to nailing down the decking.

@thomasjones1778 Год назад

Thats a lot of work. I used corrugated metal and continuous gutter system with no seams. And a lot less money.

@samu3813 25 дней назад

A video? I promise I will even like it.😅

@JustTheFactsYall Год назад

Your going to have to do a RU-vid short when you get some heavy rain fall.

@angellas.1314 Год назад

I would use this system in a heartbeat if the v panels were translucent! I would loose too much light.

@amadorodriguez6454 Год назад

Where do you buy this?

@gmangsxr750 Год назад

Could you use like a flex seal spray-on instead of the tape to prevent moisture from getting under the vinyl brackets? Wouldn't spray-on give you a more reliable prevention?

@davejohnson6738 8 месяцев назад

Labor will be very expensive, this is a professional types of work. IMO.

@hilo4noff1 Год назад

So... Per square foot what's the price tag on that set up?

@CollinsCorp Год назад

How about capturing the water?

@jimmyjones2681 5 месяцев назад

where to order this kit ?

@nobreighner 3 месяца назад

Very good energy. Needs to be directed to designs that will last.

@bassichonda96 Год назад

Trex Rain escape is another product to keep the space under your deck dry. It goes over your joists so must be installed before decking. You did not do a good job explaining how sealed around the PVC pipe. Seems like you would have a leak around that also.

@knarf247 Год назад

awesome vid, too bad the company doesn't make this anymore :(

@TheClutch90 Год назад

Why not just install corrugated metal ceiling directly to the underside of the joists?

@Condor1970 Год назад

So how do you clean that out when it gets full of Douglas Fir needles in less than 1 year? This must be an option only for inner city use, with no surrounding vegetation.

@samu3813 25 дней назад

Once every 2 years, pop out the runs and replace? Like grudgingly?😅

@samu3813 25 дней назад

Nothing beats pre panning a dry under deck before the deck boards go down. After that, any systems is bound to have lots of negatives. EPDM pond liners are the best, but lots of work upfront. After that, just hope you has enough slop and get ride of your pine trees. Every system clogs over time, if there are pine trees around

@jjdwnbyci Год назад

Tape on back of gutter would help direct it into the gutter

@Deltaconcepts Год назад

Can someone please explain how putting plastic over the bottom of the joist that is exposed to water will not rot it out in a few years? I am slow so please forgive me.

@samu3813 25 дней назад

He painter it. Let's hope there's coverage everywhere cause that wood ain't breathing after that.

@laramie5239 Год назад

This comment section is a bit negative so I'll add something helpful. If you need to cut a hole in a piece of plastic or thin PVC, you can just run your hole saw in reverse and melt your way through it. It's easier to hold still and leaves a clean edge.

@jakemiller7760 Год назад

Joist get wet and water trapped between wood and plastic. Just use pond liner

@samu3813 25 дней назад

If it was thought of before deck boards went down. Sometimes the owner is trying to retrofit an existing deck.

@Airpaycheck Год назад

How do you keep birds from nesting in the gutter?

@jimbates6227 Год назад

My thoughts, too. I suppose hardware cloth could be installed in the gaps between the joists to protect the top of the gutter, but birds aren't my only concern with an enclosed system like this. In my locale, wasps are a problem. The underside of my 12x21 deck regularly has 10-15 wasp nests. Since my current deck is open underneath, I can simply brush the nests off. If I enclose that area, I no longer have easy access and the wasps can use the gaps in the deck flooring as the entry point. That concern makes such a system a non-starter for me. I like the idea but think it would end up being more work than it's worth. My deck has a full roof, and the patio below the deck stays reasonably dry, except with a driving rain. A system like this can't keep my patio dry in such a situation. Nice video though. Well done to the author.

@GreganDunn Год назад

Wouldn't it be better if the system installed on top of the joists and kept the joists dry as well?

@markdichiara9486 Год назад

If you are building new that is the way to go. This is better suited for existing decks.

@maxfriesen6103 Год назад

Is the paint on joists for waterproofing? Was tape put on the top edge on in side of joists, or is that supposed to carry water also? I have 17.5' between house and beam. Did I understand correctly that it comes in 16' lengths? This looks like it takes lots of time. Do the panels come in different widths? I have approximately 12" on center joists. I would love a response. My beam is 33' long. I appreciate your detailed descriptions. Great video!

@Treehandler Год назад

In the time you took to ask all of your questions you could have googled your answers and learned that the v panels come in 12’ or 16’ sections in either 12” or 16” widths. He taped all of the top of his joists with a 1’ overhang over the side. Incredible amount of effort is put into the entire process as well as filming and editing footage so maybe next time consider a quick google search.

@rosed.priester3100 14 дней назад

Ive watched this video and like the system but can't do install myself...(full time work, kid, house etc...) I called the local companies that sell and offer installation...Looking at $2400 (for my size deck) plus cost of install...😮😢

@YouCanBeTheBass Год назад

*does flip and lands on your lap*

@thejacklegpreacher1793 Год назад

Any issues with wasps or hornets getting in there?

@CMZneu Год назад

I don't get it why not just instal polycarbonate underneath or some sort of light weight plastic roofing, this seems like an overly complicated way to divert water with an unnecessarily large amount of parts taped together that will eventually leak.

@milesmulligan6515 Год назад

Genuine question - how would you stop the water from just staying/pooling on the polycarbonate?

@milesmulligan6515 Год назад

I just realized that you'd just have to install it at a slight downward slope and it would just run off the edge, you wouldn't even really need gutters unless you get a lot of rainfall and are worried about the runoff

@iVolkswagen Год назад

Yeah I also thought this seemed way too overkill. Just install a poly roof at a pitch and let it drain into a gutter.

@CMZneu Год назад

Also a polycarbonate roof would let more sunlight through which i think is the idea if you are building under a deck otherwise why even have deck.

@angellas.1314 Год назад

@@CMZneu So the loss of light is the reason I didn’t go with this option. I kind of devised my own system, with polycarbonate cut in between the joists so I didn’t loose overhead space and doesn’t look tacky. The light filtering is amazing when looking out from below!

@onetrackfun3045 Год назад

what happened to the comment with the simple solution/less engineered?

@patrapper7367 Год назад

It's cheaper and faster and more durable if you use sheet metal roofing just underneath

@GreganDunn Год назад

Got an example you can share?

@janemagee97 Год назад

❤️

@BYOTools Год назад

Thanks for watching

@franquil85conn Год назад

You need to keep your fingers away from that blade 7:08

@icecoldusa 2 месяца назад

Great project, better when u dont hv to pay for materials.

@-7205 Год назад

I guess when you live on Lake Washington you can afford a system like that... Too rich for my blood... I have a 12 x 26' elevated deck and went the cheap route, a 2 pack of Costco tarps and a handful of 2 x 8 x 12 pressure-treated and made 1x strips, did tapered blocking, I gave the tarp a very slight belly in between each stringer, and when it comes to Pineneedles all you have to do is reach up and swat it with your hand and keep hitting them all the way to the end...and I made a gutter system from 4" PVC cut in half lengthwise Both ends of this tarp system are open so air passes through so no moisture problems whatsoever ... I did this as kind of a joke/experiment but I did it nice and clean...3 years later and it looks just as good as the day I put it in .... those Costco tarps are tough as nails... All of the pressure treated 1x strips and blocking I made show no signs of rot due to the pressure treated sealer that I put on them before I put them in place...

@samu3813 25 дней назад

Check back in 10 years. Wishing your system good luck. Nice thinking outside the box.

@-7205 20 дней назад

@@samu3813 my system wasn't meant to be permanent, my temporary system and my permanent solution that I have recently completed is a fraction of the cost of the system in this video. And I'll get back to you in 20 years on the solution I've installed...Vinyl seems to get brittle in due time..

@samu3813 20 дней назад

@-7205 if I am still here in 20 year, I will be happy to toss a beer or moonshine to your success🤣.

@derrickk4444 Год назад

Is it just me or doesn’t this prevent the deck from drying because there is no ventilation?

@samu3813 25 дней назад

If you only used composites. This would be a disaster for a wooden deck boards.

@amosglitterz2649 Год назад

System? Did it years ago with opaque polycarbonate with slight pitch. Cost me 100.00. This is ridiculous.

@AlainStar Год назад

👏👍💪🔥

@BYOTools Год назад

Thanks for watching Alain.

@robax3r Год назад

This kind of installation wil effectively make your deck rot faster.....

@samu3813 25 дней назад

Yep. But some people can afford to tear out thier decks every 10 years.

@mikewidget7610 Год назад

get ready for bees nests by the hundreds. You'll never have a minute's peace. Whats worse is you won't even be able to get to them to wipe them out. Wouldn't do this at my house if it were free!

@samu3813 25 дней назад

Water jets from above once in a while? And maybe insecticides?

@CannibalSheepQc Месяц назад

clean that thing now

@Seektruth-59 Год назад

This is nuts, never mind the dirt that will collect and eventually choke off the water run. If you need the bottom to be waterproof, why even install decking, install a real waterproof floor and outdoor tiling over it.

@lordviciousswede6148 Год назад

Nope. Don’t do this. Panting wood seals in moisture. Your deck will rot 10 times faster. Then slowing the water from draining faster is a recipe for disaster.

@samu3813 25 дней назад

Not if you wait for the wood to dry out then paint every surface. My deck is painted and lasted 20 + years. I just repainted 6 years ago and the areas I primed and repainted was still solid. The issue with painting wood is allowing entry points. Cover it all or nothing at all.

@vcl6741 10 месяцев назад

Great job. I'm curious to know how you eliminate water from gathering between the joist and the combo bracket ?

@thatflywelshguy9662 Год назад

This kit is ridiculously expensive. $1200 for 16ft and 6 joists so 6x16OC so 16x8’ that’s a tiny deck. I have a 15x20 so 3 kits at $3600. No thanks

@bdmski 6 месяцев назад

Looks great but I absolutely hate that it’s white. I wish they made their product in black

@allanhundeby1675 5 месяцев назад

Yikes. At 7:09, his fingers are millimeters away from that blade. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ObuFCtqLXRE.html

@guyincognito320 Год назад

OVER-E-NUNCCCC-I-A-TING

@jkreviea Год назад

No. We're all wondering why you just laid down on a wet deck.

@kodiham7532 Год назад

Too much work for me. I'll look for a different system.

@batmannoso Год назад

pura vista. todo mal hecho

@LifeSurfingDude Год назад

u really like laying down while talking to the camera. man you don't have to get down all the way to my feet, standing will do.

@danielzukeran7625 Год назад

That’s gonna leak around the rim and ledger. They discontinued for a reason. I hate dry space

@plasmaxer Год назад

Sorry but you have a peaked cap on backwards

@BYOTools Год назад

Peaked cap?

@kemetreasures5630 Год назад

Too much work

@Divljak55 Год назад

So much work for nothing. You could just use roofing sheet. Faster, cheaper and more durable...

@klee4klee Год назад

Trex Rainescape System seems to be a better solution than this. Trapping water next to the joist is scary and residual moisture could be a safe haven for all kinds of insects. I think Timbertech needs to develop a better solution than this.