DIY/Easy Macrame Plant Hanger/Macrame Tutorial/Plant Hanger With Beads/#2/2021 

If anyone is looking for the types of knots she’s using here it is: The strings are each tied to the ring using larks head knots. To make the diamond shape: - She splits the cords down the middle to make 2 sections. For each section she uses double half hitch knots starting from the inner 2 cords to the outer cord. - Then she goes back to the inner cord and repeats, leaving out one less cord each time until she has the half diamond shape. - Repeat this process on both sections - Then she goes to the outer most cord of each section and uses double half hitch knots coming back to the middle to finish out the diamond. - place the 1st bead on the 2 middle strings and make the 2nd diamond following the same method above. - The second bead is secured with a square knot Layer of beads - Split it down the middle again and use the inner 4 strings on both sections to create a single square knot about 8 cm down. - Then measure 8 cm down from those knots and create 2 square knots on the outer sections of 4 strings. - Place beads under each of the 4 new knots and secure them with a square knot. First layer of basket - take the center 4 cords and create a square knot 8 cm down from the lowest beads. - Repeat twice using the 4 cords on either side of that knot - You should have 2 strings left on each side. Pull them around to create your final square knot and first layer of the basket 2nd and 3rd layers of basket - so now use alternating square knots separated by 8 cm to create the 2nd layer. - Then repeat for the 3rd layer Tassel - Tie the ends together with a gathering knot. Cut your tassel to be even if you prefer!

If I may add some constructive criticism? I am a complete beginner at macrame and the lack of clear view camera angles, aswell as any slow motion step by steps on HOW you made the knots, did make following along with this incredibly difficult. I must have spent at least 2 hours just trying to figure out how to start the first one to make it look like yours. (I did manage to make them, not as well as yours but I'm happy for a first attempt!) I would be eager to see if you post any more macrame tutorials but hopefully they can be a little slower and more concise in future!

Hermoso..y lo entendí muy bien 👍..gracias desde mi país Chile 🇨🇱

I wish I’d have read the comments first, as I wouldn’t have started and cut my cord. This tutorial is extremely hard to follow along for a beginner

Lovely patterns and great video

Those are so beautiful Thank you so much for sharing

Amei

Lovely NEAT lots of 💓💓💓💓💓 from Mumbai ❤️❤️❤️❤️❤️❤️❤️❤️

Thank you for this tutorial very cute designs! Just curious though why didn't you (on the first hanger) do the spiral after you did the first part with the existing strings your working with before the second part? Seemed like an extra step to hot glue and have extra strings to add after the fact? I hope you don't mind me asking..

What size pots did you use? Is there a way to account for different sized pots in the event I were to make one with bigger or smaller planter? Thank you! (These are beautiful, by the way!!!)

😍😍😍😍😍😍👏👏👏👏👏👏👏🙏🙏🙏❤❤❤😘😘😘

If you could name the knots you use! Each time, maybe just the name when using them so we can just look it up instead of everyone asking you to go slower!😁

Hi! Love the video, what type of cord you use?

Hello, great video thank you! What size beads and what size pot did you use? 😊

Hi do you have the measurements? Love your work 🌻😍🥰

Very nice macarme plant hanger I have a cord with a thickness of 5 mm, and I want to make it like this plant hanger. Do I need to change the lengths, please clarify?

Very cute designs but not so useful as a tutorial since you don't show how to make the knots or at least name them

Hi! At 4:52 in the video you show a much longer portion before you measure down. How many rows are there? And it looks like the pattern changes a bit too, how did you do this? I’m following along and I’ve just completed the 6th row and not sure what to do next???

What size will they end up being? How long are they? 1,5 meter?

I could not follow this, way too fast. Sad because it is a very cute design

What size pot did you use?

I liked the beads and macrame unfortunately with very frustrating with very little instructions

Am I missing where you say the supplies list? How long each cord is?

What size wooden beads have you used?

Hi....Do you sell them....If Yes would you mind sharing the price

If I use 4mm cord .. how much more longer should I take?

What size beads did you use?

What is the final product length

What's the full length of this plant hanger?

How many yards are needed for this project please

OK I just went back to the beginning and realize that every three rows you flip it back to front. Beginner mistake I guess

17min10 ça va beaucoup trop vite pas le temps de voir correctement le noeud

You’re way to fast on the knots for beginners!

This has so many views because people need to keep replaying it... your speed up and hand positions make it so some can't view the knots or strings you're using.

Don't understand the beginning you go to fast

Easier if you explain…I need talking videos!

Beautiful hanger, terrible tutorial, way too fast. No teaching going on here

You going to fast, i am new in macramé and i can see the knots because you go to fast. Your video is not good.

If I may add another constructive criticism…you went to “fast” with no instructions….. hard to see what u we’re doing… as u were far from the project..

Unfortunately, I can't get through the first knot. I know it has to be such a simple knot, but you are way too fast.

Way too fast to follow

Can you go any faster.. seriously -_-

Celle qui a fait la video voulatit elle vraiment que nous puissions faire la jardinière ? meme lentement c est pas suivable...my god!l POurquoi tu as fais cette vidéo ? pourquoi? ME semble que tu fais un tutoriel c est pour que l'on puisse voir et être capable de te suire ? TU VAS TROP VITE ET ON VOIT RIEN...