DIY : Easy way to hide your dashcam wire perfectly! (without open A-pillar) 

Very well, I agre with you too. This tutorial is easy to understand

How do I get the chip out?😭

question did you download any app in your phone???

If side air bags don't deploy because of a wire a person probably doesn't want that car lol

My car doesn’t have the logo there, but i know it has airbags inside 20-30 cm down from the roof liner. It’s a part of the side curtain. This install would be very dangerous on every car with airbag in the a-pillar, as you said. You need to remove the trim and make sure the wire doesn’t interfere with the airbag. Or tuck it in between the trim and window👍

@@MrKjetil101 air bags should be about pressure. If a weightlessness cable prevents 100s of pounds of resistance and air bags from deploying...then, again the vehicle is not worth owning. Ask yourself, how much does a cable weight innately? Ounces to pounds. Stop the ignorance.

@@doritosmix73 It’s really not about the wires preventing the airbag from deploying, but it’s the fact that 100s of lbs of pressure from the airbag deployment can send this wire flying into your face and cause severe injuries. When routing these wires, it’s always best to remove the A pillar and run the wires above the airbag so if it deploys, you don’t get injured by the force of the wire flying out and potentially hitting your face or causing body injury. It’s certainly a potential risk that could cause severe injuries. Better to be safe than sorry.

@@dreamnight-mq1zg if airbags deploy the wires are going to go flying along with the a pillar material. Do you think air bags deploy and remain behind the housing?

just slot it in the rubber

No it will not, unless the sensor detect strong impact on the car (front & back, side of door etc.). You can remove battery terminal before do it if worry.

@@junkitlow thanks mahn, I just fixed all wires and setup my dashcam, luckily I dint get any chance to see curtain airbags during the process😄

Some people just are not tech savvy. Pay someone to install it for you......

@budcunningham6732 I'm a prof car audio installer. I'm pretty sure I know how to install a camera in a car but it's not blue tooth clearly so how does it connect if no wires. It don't because it's a bs scam

@maddmavic I have installed these also , and wifi isn't necessary. I have one of these in my car . Please define "professional " .

I don’t believe you need to use that specific tool , at least I am not planning to . It seems that you need to just get the wire under the headliner and that seem to be pretty easy

You can get various spudgers and other disassembly/repair tools like that from ifixit. www.ifixit.com/Store/Tools

You don’t really need it!

Mine came with the camera.

Nope I'm trying to do it and it won't stay I have to use tape.

Try to check the fuse goes to which accessories?

Twist Tie Wire shopee.com.my/product/167324543/11329124814?gad_source=1&gclid=Cj0KCQjwzZmwBhD8ARIsAH4v1gWGJJg1zt36_-XGr2S91PnnDFcvg-na28kK_1jZYXpo9tvslBZyCbIaAilGEALw_wcB

yes

Dash cams first became popular overseas, America is pretty late to the trend.

You so cool