DIY Engine Hoist and Head Removal - Free Range Sailing Ep 66

Подписаться 137 тыс.

Просмотров 45 тыс.

50% 1

In the first of our refit series, we get started on our two main priorities for Mirrool's refit namely, preparing the hull for a new coat of anti-foul and a minor engine overhaul. As with all refits the unexpected is commonplace and we have to adapt to changing circumstances.
Music Credits
00:01 Weathervane - Coral Bones
🔊Music licensed from Lickd - lickd.co - Real Artists. Real Music. Claims Free. For RU-vid. 🔊
↪ Listen and License this track here: t.lickd.co/2ac...
🔑License ID: ae09b060061d4091b473cc3364cc15e6
1:25 Lucid Dreams (Instrumental Version) - Tape Machines
(www.epidemicsound.com)
2:40 (onwards) The Kid in the Bins - Doctor Turtle (doctorturtle.b...)
We’ve made a playlist of some of our easy listening tunes on Spotify, follow along as we update with each new episode, here’s the link: open.spotify.c...
Become a patron of Free Range Sailing! / freerangesailing
If you’d like to make a PayPal donation: bit.ly/2Cpp1xz
Follow us on:
Instagram: / freerangesailing
Facebook: / freerangesailing
Essential Cruiser Reading List
**Our Refit Go-To Book**
This Old Boat (Don Casey) amzn.to/2S6E9dj
The Cruiser's Handbook of Fishing (Scott and Wendy Bannerot): amzn.to/2ycQTEA
Boatowner's Mechanical and Electrical manual (Nigel Calder): amzn.to/2xu8kSc
The 12 Volt Doctor's Practical Handbook: For the Boats Electric
System (Edgar Beyn) amzn.to/2gq257p
Our Film Making Gear
SnapLens lenses and accessories for smartphone and tablet devices: www.snaplens.co...
Pascale's Mobile: amzn.to/2xkcs4c
DSLR Camera: amzn.to/2zbiPXZ
Wide-Angle lens: amzn.to/2gqwAtU
Polariser Filter: amzn.to/2yUxl5l
Prime lens: amzn.to/2g5KlBg
Action and Underwater Camera: amzn.to/2pbt1vG
Big Tripod: amzn.to/2ycMb9N
Second Tripod: amzn.to/2ycUO42
Video Microphone: amzn.to/2QBEOzY
Lapel Microphone: amzn.to/2Ov5cKa
USB Microphone: amzn.to/2xffsQu
Drone: amzn.to/2FjFlVG

Опубликовано:

18 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 250

@IrregularPineapples 2 года назад

jesus everything about this is glorious -- love the details and the nitty gritty of the engine -- this is badass

@elefja1 3 года назад

That's the same way I label aircraft pushrods when I take them out! Nice job, you're a great teacher

@TheNWaite 5 лет назад

I seriously doubt there is a more authentic, genuine, informative, educational, ''living life as it should be lived'' type sailing blog out there. Discovering your channel has made my week.

@firstmkb 4 года назад

I always enjoy your videos as entertainment, but you also seem to cover things that the other channels I follow don't. Thanks for showing some of the diesel workings!

@whotknots 3 года назад

With regard to the morbid attraction engine interiors exert upon small and injurious objects. Back in the 1980's after just completing a complete rebuild on the engine for a V8 Range Rover a mate of mine started it for the first time and immediately heard a sound every mechanic dreads, a high frequency rattle! Evidently a single, small, machine thread screw had somehow been overlooked where it lay somewhere in the intake network and literally as the engine started, the destructive little monster had promptly migrated straight into a cylinder. You can no doubt imagine the rest of the saga Troy!

@izaacbanks3337 5 лет назад

i like that timber boat to your port side!!!

@hyime69 3 года назад

The use of a Hammer by the Un-Trained can be costly but as a Qualified Engineer Jungle fighter and Twig Snapper! The use of a Tapometer or a Giggling pin Percussion adjustment device or the Ye Good Olde Walloping Stick is Strongly advised if it don't budge then get the Bigger One and HIT IT HARDER!!!

@professormoptop 5 лет назад

Troy reminds me of a professor with the wealth of knowledge he knows and contributes to the sailing community. Love the content!!!

@toms4123 5 лет назад

Great episode - wish I had Troy’s experience

@SaschaSupertramp 2 года назад

Nice Video, Muchas Gracias ;-) I bought a boat with a Yanmar 3GM30C this year. So thanks for sharing! Kind regards from Germany Sascha

@gymcoachdon 5 лет назад

"The right tool for the job is a hammer, and anything can be a hammer." Sounds like a T-shirt slogan to me, and I'd buy one! Great delivery on that line as well! I feel a bit silly, but I checked everyday for this upload, and was always a bit sad when it wasn't up. Glad you are back at it!

@matthewmac89 5 лет назад

I have watched many sailing shows and they are all good (well most) but you guys are the best!

@johnbaumgartner2137 5 лет назад

WELL done,

@alfredwylde3824 5 лет назад

I missed you. Thanks from Kent in uk

@kevinjasper415 5 лет назад

Great to see partners getting on so well on a common project. You are both knowledgeable in your own ways and bring different things to a common good. You have a great boat and thank you for letting us share your story. Stay close to each other, heads down and you will be back in your natural environment before you know it. Stay safe and enjoy each other and your travels.

@larrimos 5 лет назад

It’s difficult to express the joy of seeing a new upload from you two. Thanks, from the currently frozen tundra of Kentucky....

@brixtonalden6848 3 года назад

Instablaster...

@jerrycrockett2545 5 лет назад

I've been watching Free Range Sailing since the beginning, and I've refined my technique. I click like, then watch the video.

@danhaas 5 лет назад

Jerry Crockett Ha! By now, you KNOW you’re going to like it! Me too. Most dependable channel for that!

@b-s-8742 5 лет назад

We've missed you!

@FreeRangeLiving 5 лет назад

Well, we're back!

@geneberry7114 5 лет назад

Glad to see you and Pascale back Troy, but especially glad to see my future boat : )

@Jayboy72 5 лет назад

Dueditional application of force? Elbow grease..Love it!

@tomharrell1954 4 года назад

Great video!

@mikeferguson2828 5 лет назад

Great video guys. I have 2x 3ym30 in my cat . Nice to see the internals

@philbox4566 5 лет назад

Ooooh, that lovely pearling lugger behind you near the end. Hope that gets done up to pristine condition.

@FreeRangeLiving 5 лет назад

Condemned:(

@philbox4566 5 лет назад

@@FreeRangeLiving Oh that is so sad. No way can that be left to rot.

@stuartmcmichael5250 5 лет назад

Thank goodness you guys are back to restore my Free Range Sailing Tonic of pleasure.

@graemefenwick6925 4 года назад

Push a long strip of rag or plastic (lint free) into any open galleries to prevent bits dropping into the sump. A long strip, so it hangs out, over the side & you don't re-assemble the engine with the galleries still blocked by them.

@SailingTimeFlies 5 лет назад

Great video free range, we just subscribed to your channel and enjoying your videos, it is so nice to come across sailing channels who are sailing and living on smaller boats. cheers Dean and Fiona.

@FreeRangeLiving 5 лет назад

Welcome aboard!

@sk333tchy 4 года назад

You're off your rocker ;')

@hellohellohello6847 5 лет назад

Just found your channel!! Nice work!

@FreeRangeLiving 5 лет назад

Welcome. There's a ton of episodes before this so we hope you enjoy them all.

@bandulasri 5 лет назад

very educational mate ~

@boblawrence1692 5 лет назад

Missed you guys.....thank for sharing

@shanekonarson 5 лет назад

Great episode, I like the more educational episodes sometimes , Troys explanations of the mechanics are very clear and concise . Got a project just like this one in the future with a mates boat . Thanks guys

@wendymcdaniel7129 5 лет назад

My husband Charlie says “the bigger the job, the bigger the hammer!” ;-)

@panther105 5 лет назад

That little engine seems so humble, yet it's taken you all over and you've literally trusted it with your lives. Good little motor. Now it's your turn to get some attention....

@OleNavy 5 лет назад

Ahhh, I can relax again. Glad you have finally got some internet access once again. Pascale has kept my mouth watering on Instagram, but I have been missing my mechanical fix from Troy. Back in the swing again!!!

@HopeOfJoe 5 лет назад

Troy just is amazed with tips and such when it comes to mechanics. Oh, yes, and fishing !!! :-)

@ireneiusi1209 5 лет назад

You guys are awesome. Thank you Troy for the informative video, I just finsihed a Coxswain course and we did a little engineering so now I could actually understand some motor stuff that you were talking about. Thanks. P.s. Troy is much better explaining things then the lecturer was.

@FreeRangeLiving 5 лет назад

We recommend a few books in our video descriptions. Anything by Nigel Caulder is an excellent resource if boat systems are your future. Good luck!

@davexvs 5 лет назад

wow i like the way you educate without being condescending and pascale must be very patient recording what you do look forward to more {:-) PAV uk

@danhaas 5 лет назад

These episodes are what make the adventuring episodes smooth sailing. Looking forward to the coming refit eps, then splash! Off to new horizons! ❤️🎶

@jamest6837 4 года назад

i was a diesel mechanic for 35 years....you need a can of ''pb blaster'' that stuff is 100 times better than wd-40 for breaking stuff free.....good job on your mechanic skills...

@leongiese2349 5 лет назад

"Always important to use the right tool for the job. The right tool is a hammer and anything can be a hammer" I say the rye smile mate! hah hah.Good to see You guys back.... you crack me up!!

@RoyClare 5 лет назад

Loved the discussion about “just an anode”. You guys ... 🤣🤙

@MajTom-wd2yt 5 лет назад

A rare find...a capable Vessel with an excellent Captain & First Mate. Been on board since the beginning...enjoyed every episode.😘 Ventos justos e mar calmo ⛵️ 😘

@madwldgrp1 5 лет назад

Can an engine overhaul and refit be any tougher...not when Troy and Pascale are on task! You two inspire when you say, 'its not that difficult, it's well within your grasp'.... You two are legends!!

@dinksontour2179 5 лет назад

Hi guys great video Troy keep a look out for chemsearch yeld it's cost heaps but it's great in wet areas were bearings gett stuck on shafts and stubborn bolts etc try bearing supplers Rgds Peter

@ascot1049 5 лет назад

Man in his element. Nether seen you smile has much .

@MrEaf1974 5 лет назад

Ahhhh so happy a new episode is out. It feels like it’s been forever ☺️😁😁

@jonnorousseau3096 5 лет назад

Yay, missed you both, Troy, I'm no idiot when it comes to machines and engines, you explain things so well for those that perhaps don't have years of engineering experience, and you both give so freely and sincerely of your knowledge, a huge shout out to you. Free range sailing is by some stretch the best sailing channel on RU-vid. Riley and Elayna would be well advised to take a leaf from your book. It is the book of reality, and not the book of fantasy. Keep these great videos coming.

@TheNWaite 5 лет назад

Agreed on all fronts. R&E lost me when they sold their souls to commercialism and picked up that plastic palace on water from the French boat builders. I am staying fixed on this channel now.

@jonnorousseau3096 5 лет назад

Yip, the early SLC videos were really good, but as time passed, less sailing, more oooooh aaaaaah ,look at out fantastic cat, anchored, and us pontificating on the whole cruising lifestyle, and the realities for 99℅ of boat owners and cruising yachtsmen, fair dues, their early videos were great, but Troy and Pascale are more down to earth, not romanticising what is a tough, dirty, smelly, expensive, wholly unromantic way of life. The real difference is Troy and Pascale will have a following of actual sailors, and that following will grow as more genuine yachties grow tiresome of the unrealistic paradise island dreams that some other channels are beginning to spew forth like holly wood "celebrities'. Sorry the likes of SLV AND DELOS(utter self glorification puke) get over yourselves, be real. I've commented on this channel and got an immediate and friendly response, more than I can say for some other channels

@jonnorousseau3096 5 лет назад

The reality is that Troy and Pascale are like most of us, limited budget, small manageable boat, no airs and graces, delusions of grandeur, RU-vid and Patreon are fickle playing fields, you can fall as quickly as you rise. Same with DELOS, these types of channels sell unattainable dreams to couch dreamers, who might find themselves well out of their depths' at sea in an environment they never saw on a You tube video. I crew on a 63' retired Cape to Rio open ocean racer, with 13 self tailing cockpit winches, for running backstays, traveller, main sheet, genoa and jib sheets, twin interlinking 2 speed pedestal grinders. Blah blah, usual Clipper race type setup. These big name "sailing channels" are largely utter bollocks in terms of reality.

@FreeRangeLiving 5 лет назад

There's something for everyone out there and we're glad to be here for all of you guys. Thanks for joining us.

@48William 5 лет назад

Mailed yesterday hope you enjoy

@FreeRangeLiving 5 лет назад

Thank you sir

@bradyfilm 5 лет назад

Hey T and P great to get a bit of Free Range back in my life, can't wait for more!

@gking5522 5 лет назад

Once again, you're reading my mind. I have a 2GM 20F and it will need to be overhauled next year. So, you've lead me through the hallowed halls of knowledge and onto the straight path to avoid Fuc#ing Up! Thanks Troy. G King, SV Intuition

@FreeRangeLiving 5 лет назад

The straight path to not screwing up? Friend, that path is winding, tortuous and well hidden!!

@gking5522 5 лет назад

@@FreeRangeLiving Well Yeah, but I was trying to keep the comment terse! ;8>)

@MagniKhan 5 лет назад

The tips are golden Troy, thanks. Love the show.

@ravenfeather7087 5 лет назад

Ah, the old diesel engine blues. When I took over the survey vessel I ran the organization I worked for agreed to replace the engine with a Cat 3306. What a treat to have something that was dependable and not needing constant repair. More of the story, I examined the hull of the old steel boat and discovered it was getting thin in places. Rusting. So, having to take it to a shipyard anyway for the engine, wrote up the specs for cutting out weak sections and replacing with new metal. One day I went to check on the progress, several hours drive, and when I saw their hull repair my eyes about popped out of my head. Instead of cutting out the weak sections they had simply scabbed over the weak metal and welded on another layer of metal. Fortunately I had carefully written the contract and it said cut out the deteriorated metal and cut new metal to fit the hole and then weld. Which they did. They did a great job with the engine though! Loved that engine. I suspect it's still blub blubbing.

@FreeRangeLiving 5 лет назад

I do remember you telling us about that shipyard in the Gove episode. I like the CAT diesels too except for the injectors being under the rocker cover.

@sawingate 5 лет назад

So happy that you are back! Great instructional session.

@pmnfernando 2 года назад

i am just rebuilding my 2GM20, i removed the head and had to bang the shit out on those pre combustion chambers. the one chamber came off after a few initial hard bangs, the second one however had me banging on it until the whole injector assembly was out. it was so stuck that i flatenned the slightly conic shape of it. result: a new combustion chamber costs 240 pounds. yanmercenaries!!

@amarieshearer7613 5 лет назад

Don’t know much about engines but it was interesting seeing you break it down!

@philgawthrop2518 5 лет назад

Troy, your engineer is showing! I know you love this stuff, good on ya!

@lindaaustin-morin7781 5 лет назад

Great video!!! Love the technical videos. Can’t wait for more!

@MiQBohlin 5 лет назад

Thnx m8’s, I was a bit worried there. Now I know you’re kicking on. Good episode! 🛠 Like the way that anything can be a hammer 🔨 😉 And thnx for the related book links. 📕📘📙📗

@FreeRangeLiving 5 лет назад

Fear not Mick! We still have a long way to go just to finish seeing Australia. Anything that can't be fixed with a hammer is a job for an electrician.

@MiQBohlin 5 лет назад

🤣

@MiQBohlin 5 лет назад

Then when you need a sparky, just let me know ⚡️🔌

@bevantweedie5129 5 лет назад

Free Range Sailing an electrician can fix anything with a pair of wire cutters.

@MiQBohlin 5 лет назад

An amp clamp is quite handy as well 😉

@davidb.cutter4631 5 лет назад

Thank you to you both for sharing your experiences and expertise in caring for your sailboat. It has always amazed me at how many people don't know anything about their engines, other than turning a key to start. Would it be beneficial to devise a fresh water closed loop cooling system for your engine? I'm in the middle of stripping/cleaning/repairing a raw water cooled atomic four on our S/V Banyanda. It will go back together with a fresh water cooling system. We have a four cylinder Vetus (Mitsubishi block) on our M/S Olivebank. I'm currently installing a full set of gauges on the diesel as well as water temp to replace the "idiot" lights on the console. I don't know about you, but I rather enjoy getting into the "nuts and bolts" of what is going on below deck when we are out on the water. As is always the case, we thoroughly enjoyed this video. Outstanding quality. Best of Luck Dave & Linda M/S Olivebank S/V Banyanda

@FreeRangeLiving 5 лет назад

I think the small increase in complexity is worth it for less corrosion in your case. Our engine is very old and the cooling galleries still looked very good so I felt leaving it as raw was ok. Any modification that simplifies your cruising maintenance at little cost is probably valuable.

@fillg 5 лет назад

Every toolbox needs a screw stick, a beatin iron, and a pair of pinchers. :)

@rustyjeff3007 5 лет назад

Have been looking forward to the refit series. Yay

@HDXBear 5 лет назад

Well done as always. having that engine out and doing injector repairs taking the head off is time well spent as it affords you an inspection , decarbon the cylinders and head etc and provides peace of mind knowing everything is sound an ounce of prevention goes a long way. I always cut my oil filters open and check the filter medium for any metal or cuttings etc you can get a feel for whats going on down in the basement . Cheers to you both hope your haul out stays within budget

@richardspurlock3300 5 лет назад

We love the way you'll do your videos, your style of video is nice. We also love the free range shirts, they are very nice. Thanks again for all the vids.

@blessedbackpacker222 3 года назад

you can insert rig in open areas of engine in order to protect anything falling inside

@jasongrinnell1986 5 лет назад

Awesome video y’all. Love the tutorials. As you already know tips, tricks and easy fixes use to be years of experience. Now we have RU-vid! Looking forward to the next one!

@donniesenor3440 5 лет назад

So glad you 2 are back, love it

@doug1030 5 лет назад

Good to see you two again . Looking forward to a new season .

@rickatkins1493 5 лет назад

Go for the new one, peace of mind at sea is a wonderful thing.

@CaptainBax 5 лет назад

Great to see you guys getting on top of some boat maintenance but the main reason I'm leaving a comment is, I just wanted to thank you both for choosing such a lite material for your T-Shirts. I unfortunately caught shingles off my brother in-law just before Xmas and anyone who has had it will tell you, just how painful and irritating it is. My only gripe is I wish I had bought half a dozen of them, as it was the only shirt I could wear for any length of time while I suffered with it. So a BIG thank you and hope you guys keep with that brand for future T-Shirts as there are so lite and cool to wear, just perfect for our hot Australian summers. Talking of Shirts I think Pascal could do with a new one, looks a bit worse for wear but maybe that was from all the hard work you guys have been doing. I also hope she didn't have to sand that whole bottom down by herself, can't think of a worst job than sanding paint off. If she did, you've got a keeper there Troy, as if she wasn't perfect enough... great cook, loves fishing, eats oysters and likes a beer... you better get a ring on that finger before someone else does :-) lol.

@englishmaninfrance661 5 лет назад

Think you covered pretty much everything , good job of explaining to those who don't know :)

@overlandteahouse1273 5 лет назад

Thanks again for this. I have the same engine in 'Clea', but my experience lies briefly in VW boxers so it was super helpful to see you pull this apart and also explain some aspects specific to diesels.

@yepme6484 5 лет назад

I do in joy how he explained the diesel engine, and to explain on paying and over priced part or frankenstein it. Good job!!!!

@sw923 5 лет назад

Great see you guys back.Good luck with repairs.

@dougfairweather 5 лет назад

Thanks Troy... You have a great way of teaching things... (But I'll always refer to the workshop manual!)

@richardscudds4753 5 лет назад

Dam , now i gotta wait till next week , very intriguing , got my attention

@steamerAE 5 лет назад

Thanks for another great video, well done, thumps up!

@bmushler 5 лет назад

As usual, great info and the presentation is superb. Enough explanation to have things make since but not so much that you find yourself thinking " Blue, yes, I think I'll paint the ceiling Blue" (part of an old bad joke). The is it worth your time! Hit home what with the little head nod. But life is soooo much better now, Right! Best O' Luck Bill

@zencrasailing5732 5 лет назад

I went through the same process many years ago with my Clansman “Idler” finding large patches o osmosis and many smaller blisters. I hand sanded the whole hull back to glass. She was a beautiful boat to sail.

@TC-nk5te 5 лет назад

So glad to see you two back, I missed my FRS episodes :)

@ericktaylor-webb6711 5 лет назад

Remember Troy to use the citric acid in the ports were the water runs through to dissolve the lime scale and give you a very clean port for more water to cool the engine down and you can also use the citric acid the clean out all the pipes so they are nice and clean any citric acid will do as long as its in the crystal form so you can dilute it

@DreadDoctor 5 лет назад

Glad to see you back. Great video, I really enjoy watching you get dirty on a boat for some reason..lol

@philipwilkie3239 5 лет назад

LOL great to see Rosshaven, good choice. We spent 6 weeks there exactly this time last summer getting our steel bottom blasted and repainted. Overall we had a good experience there, hope the weather held and it works out well for you guys as it did for us. SV Burramys.

@boeretoer 5 лет назад

Missed you guys alot! Thank you for this cool video!

@cjhooker4955 5 лет назад

I don't have a boat. However, I am addicted to refit videos.

@FreeRangeLiving 5 лет назад

I like watching other people working too.

@fitzyholden1036 5 лет назад

Good to see you back !

@H2Dwoat 5 лет назад

I love these videos, you make it look easy (even when issues arise). Cheers.

@S.Kona34 5 лет назад

Good to see youzzzz...

@victorbitter583 5 лет назад

Nice one. Here's a tip for you Troy that I learned in the exhaust trade. There is a product you can get called Wurth Rostoff Ice+ Professional. It works about 30x better than WD40 as a release agent. It's not cheap compared to WD but it's great to have a can and only use it when you have to. It would have made short work of them anodes and the pre/c chamber. This stuff has never ever failed me. cheers.

@FreeRangeLiving 5 лет назад

Wurths make consistently good products but they aren't as ubiquitous as the old WD. I'll get some if I see it.

@TattooDawg 5 лет назад

Very informative! Thank you very much.

@48William 5 лет назад

Glad you are back on missed you guys

@klemenprezelj 5 лет назад

Nice seeing u again. I have the same engine, giving me a hard time, i'am s...mechanic. Hope to see you back on the water soon. Best regards, K.

@brianboys9015 5 лет назад

VERY INTERESTING.

@Bleemus 5 лет назад

Well done!

@barryrizzo2944 5 лет назад

Happy you are back

@PillSharks 5 лет назад

The boat my father bought over 20 years ago came with the Yanmar GM20 and it’s given brilliant service... the only problems I’ve had was the filter housing bleed screw stripping, the whole unit was replaced and that wasn’t cheap from memory and the fuel lift pump started leaking and was replaced...other than servicing items that’s it... I’ve had the same problem with the anodes especially the bastard on the rear of the engine! Another problem I was made aware of is the exhaust elbow which can corrode inside forcing seawater water into the rear or number 2 cylinder! Luckily for me the previous owner had made one up which is different from Yanmars design and works perfectly and shouldn’t ever need replacing... anyway just thought I’d let you know, there’s plenty of information about it on the Internet! There was a gentleman in the US who supplied them for around a £100 delivery..

@FreeRangeLiving 5 лет назад

Yup, I can see that the bleed would be a problem. Steel bolt, alloy housing. Have replaced lift pump for that reason and could see a blanking plate and 12v lift pump as a sensible option with original pump kept as spare for remote area failure.

@PillSharks 5 лет назад

Free Range Sailing so you’ve gone over to electric lift pump have you? One of our workboats has a Beta 120hp engine in it and the guy who was looking after the maintenance was told that the original was leaking and they put the 12v pump on it... I felt a lot happier with the old pump than the electric one and now every time I’m working the boat it’s always in the back of my head that it’s going to fail! Lol

@FreeRangeLiving 5 лет назад

No, still mechanical but electric makes sense.

@PillSharks 5 лет назад

Free Range Sailing ok so you will probably go to electric then... personally I like the original idea and apart from the lift pump leaking there’s not much to go wrong with them and if the engines running then the pump is working! If the electric one loses power or burns out then obviously the engine will stop! My mother and father are about to join a cruise ship in Brisbane in the next week or so and off up to Papua New Guinea and back to Brisbane so I’ll get them to give you a wave as they go passes Townsville!

@davidgiles5030 5 лет назад

Just a word about WD40. There's a product put out by a company by the name of Lloyds. It's called Moovit. Far out performs WD40. I've had WD fail many times,but spray some Moovit on the seized bolt,nut, injector etc. Leave for an hour and off comes the offending part. If it's available in Australia,do yourself a favour and get a can. Once again we enjoyed the video. Thanks.

@hv2sailsvsweetpea680 5 лет назад

Great video! Love you guys😎

@bartblack7326 5 лет назад

Great video as always...

@MrRJBooth 5 лет назад

Enjoyed watching this . Cheers :-)

@jcs6347 5 лет назад

Good to see you back on! I've help DIY maintenance on Yanmars with friends here in the USA. Keep the fuel clean and the filters cleaner and they run forever - on a inland lake that is... lol, Cheers