DIY Epoxy Resin & Oak Bottle Stopper w/ Display Stand // Woodturning

Подписаться 1,1 млн

Просмотров 56 тыс.

50% 1

I turned 20 epoxy resin and Oak bottle stoppers using Oak spirals from H&H Distillery! Check out Rockler’s amazing woodworking tools, supplies and hardware : bit.ly/rocklerc... #sponsored ⛵Check out the Total Boat High Performance Epoxy I used! amzn.to/2QRf5GA
🤖Learn more about my Inventables X-Carve CNC machine! bit.ly/xcarvecr...
This project was by far the most woodturning I've done in one condensed period and I feel like I really got much better as I turned more stoppers. I also whipped up a quick display stand for the stoppers, and they're now for sale at H&H's tasting room!
👕 Get your Build It Yourself merch! bit.ly/BuildItY...
📦 Materials Used On The (affiliate):
Total Boat High Performance Epoxy : amzn.to/2QRf5GA
Oak Spirals : amzn.to/2UEMaEQ
Epoxy Pigments : amzn.to/2EdLFvL
MatterHackers PRO Series PLA : www.matterhack...
CA Glue : amzn.to/2rArkct
HUT Crystal Coat Finish : amzn.to/2PBCxmu
Bottle Stopper Hardware : www.rockler.co...
🛠 Tools Used On The (affiliate):
Lathe : amzn.to/2LfqDOH
Ultimaker 3 3D Printer : www.matterhack...
Negative Rake Insert for Easy Wood Tools : amzn.to/2Ei5W3m
Turning Finishing Kit : amzn.to/2rxmCvW
Buffing System : www.rockler.co...
Mandrel : www.rockler.co...
📹 SUBSCRIBE : goo.gl/V5gcNJ
💰 SUPPORT ME : / @craftedworkshop
📲 FOLLOW CRAFTED WORKSHOP!
INSTAGRAM: / craftedworkshop
FACEBOOK: / craftedworkshop
TWITTER: / craftedworkshop
PINTEREST: / craftedworkshop

Опубликовано:

16 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 146

@craftedworkshop 5 лет назад

Thanks for watching, y'all! Support me by supporting my sponsors : Check out Rockler’s amazing woodworking tools, supplies and hardware : bit.ly/rocklercrafted #sponsored ⛵Check out the Total Boat High Performance Epoxy I used! amzn.to/2QRf5GA 🤖Learn more about my Inventables X-Carve CNC machine! bit.ly/xcarvecrafted

@crossgrainwoodproductsltd9230 5 лет назад

I enjoyed each step you went through and learned a lot. Bottle Stoppers or any other wood epoxy resin project is now accessible to me and any hesitation I had is now gone. Watching the errors you may have made and then corrected it was great as a learning lesson for me. Thanks a lot for great contents.

@craftedworkshop 5 лет назад

Thanks a lot, glad you enjoyed!

@philz9835 5 лет назад

Hey Johnny, just a few cents from me about some products. If you do a lot of epoxy/resin work, I highly recommend you take a look at a 2 part system called Resin Research. A 1 gallon kit costs $115. It's incredibly predictable, 100% reliable and extremely hard as well. It will polish just fine. It's also water clear when it cures and doesn't yellow at all. I've been using it for about 10 years and I just absolutely love the stuff. Second, if you have a vacuum pump, I'd suggest setting up a vacuum chamber for de-gassing instead of pressuring it. Though there are times you want one over the other. These are also another sweet project from you as well. Nice job. Love seeing others come up with their own techniques.

@modustrial 5 лет назад

Such a fun process....love the use of digital fabrication as part of the work flow too!

@craftedworkshop 5 лет назад

Thanks man, it was awesome to be able to incorporate 3D printing and CNC on a project like this!

@jimjohnson5787 5 лет назад

Those turned out nice! If you're going to try a CA finish, I'd recommend using Mercury Flex CA and activator. I do this with pens but it should work just the same for bottle stoppers. My process is: sand to 400 or 600 grit, wipe clean with denatured alcohol to remove any dust and moisture in the wood, 3-4 coats of thin CA, 1-2 coats of medium CA, spray activator between coats, wet sand up to 12,000 grit, and finish off with some Meguire's plastic polish.

@SpencleyDesignCo 4 года назад

Nice Johnny!

@JTWoodworks 5 лет назад

These look great!! The oak spiral really pops in the epoxy

@craftedworkshop 5 лет назад

Thanks!

@JonnyBuilds 5 лет назад

They came out really nice!

@craftedworkshop 5 лет назад

Thanks man!

@dennisnebgen9049 2 года назад

Nice Lathe. Gotta love those Nova lathes.

@HorizonElectricOH 5 лет назад

Love the idea of having the mini lathe setup as a buffing station. Nice project.

@craftedworkshop 5 лет назад

Thanks, my buddy Grant, who makes tobacco pipes professionally, turned me on to this setup. Works great!

@ryanedwardking 5 лет назад

Those are beautiful. Great work and a great use of material that would otherwise go to waste.

@billk8579 5 лет назад

Great video. Bottle stoppers look fantastic. I recently turned my first stoppers using the Ruth Niles bottle stopper mandrel which cuts the threads as you insert it into the blank and used her stainless steel stoppers. Take a look at that system. It's is easy.

@craftedworkshop 5 лет назад

Thanks a lot! And yes, a tapping mandrel would have saved me a little time for sure!

@TotalBoat 5 лет назад

These are outstanding!

@craftedworkshop 5 лет назад

Thanks guys!

@BruceAUlrich 5 лет назад

I love the way that spiral shows through there. Also, I’ve got to get that sanding system. It does such a great job!

@craftedworkshop 5 лет назад

Thanks Bruce!

@MikeTheMaker1 5 лет назад

They came out really smooth.

@craftedworkshop 5 лет назад

Thanks Mike!

@ZacJones 5 лет назад

Nice turning! The stoppers turned out awesome and totally worth all that effort! Great build

@craftedworkshop 5 лет назад

Thanks!

@danfarser2880 5 лет назад

Love these stoppers.

@craftedworkshop 5 лет назад

Thanks Dan!

@Twin_Flyer 5 лет назад

Those turnings came out great!! Instead of a pressure pot what about a vacuum container to remove air bubbles from the pours? I really need to get a large to try that...

@craftedworkshop 5 лет назад

They are used for different purposes and the pressure pot was really ideal in this situation since a vacuum chamber would have caused the molds to overflow. Thanks!

@JohnMadeit 5 лет назад

the stoppers are great and they are gonna have a great story to them to anyone who gets one.. i hear your gonna be in UK for makers central in may it will be great to meet you.

@craftedworkshop 5 лет назад

I am, see you there!

@fredoswego 5 лет назад

I assume the pressure pot applies pressure and squeezes any existing trapped air bubbles down to nothing? Is that better/more efficient than putting it in a vacuum chamber and sucking out all the air - because that's what I see normally done.

@CrafterMaker 5 лет назад

This look great! Have to admit I was a little skeptical when I saw the wood spiral. The color epoxy looks so good 😃

@PFWoodturning 5 лет назад

Nice! They came out great!

@craftedworkshop 5 лет назад

Thank you!

@xxshamixx 5 лет назад

They look really cool! Wow

@craftedworkshop 5 лет назад

Thanks!

@furthernorthfab 5 лет назад

Nice! Those stopper are awesome, Johnny! I bet you could make a few different projects with the oak epoxy combo.

@craftedworkshop 5 лет назад

Thanks man, and yes the gears are turning 😊

@xRMCoaches 5 лет назад

Good stuff. On the sanding: don’t use a wet rag if you are not wet sanding. That really just complicates things unnecessarily. Also, what type of sandpaper is that? Type does matter, even at lower grits. I use the Norton brand for turning because of the finish and the length of time I can use it.

@craftedworkshop 5 лет назад

Thanks! And yea, wiping it off between coats probably wasn't necessary but I was trying to expose any big scratches. The sandpaper is from Klingspor, super high quality stuff. I bought some cutoff rolls awhile back and they're perfect for this type of sanding.

@xRMCoaches 5 лет назад

@@craftedworkshop I wipe off between sandings, but just with a blue shop paper towel. It really does make a difference. I was just questioning the wet part.

@OutoftheWoodsCustomWoodworking 5 лет назад

Those are wicked man! Great job getting them super shiny. Mint!

@craftedworkshop 5 лет назад

Thanks a lot dude!

@TravellingAsh- 5 лет назад

Simple. I don’t know why everyone isn’t making these. (Great work dude)

@christhornesrensen6519 5 лет назад

Cool build, love it when you work with epoxy. Watching from Denmark.

@craftedworkshop 5 лет назад

Thanks Chris, epoxy is SUPER fun. Definitely will be doing more with it here soon.

@MakeBrooklyn 5 лет назад

Sweet those came out great!! Pro tip though, if you finish the bottle, there's no need for a stopper. ;)

@craftedworkshop 5 лет назад

Thanks man! And yes, but when you have too many bottles open, you need stoppers :)

@MakeBrooklyn 5 лет назад

lol fair enough @@craftedworkshop

@armata6530 5 лет назад

I’ve been waiting for more woodturning videos. Hope to see more in the near future!

@craftedworkshop 5 лет назад

Definitely want to do more!

@DumpsterMarcus 5 лет назад

sweet dude!! came out really nice!

@craftedworkshop 5 лет назад

Thanks!

@ginamariewood3101 5 лет назад

I hope there still around in January I will be in Asheville NC then 😊😄 beautiful work hope I can buy one

@craftedworkshop 5 лет назад

Thanks, they should be!

@FredMcIntyre 5 лет назад

Awesome work Johnny! 👍🏻👊🏻

@craftedworkshop 5 лет назад

Thanks Fred!

@bryanholder1329 5 лет назад

CA glue finish hahahahaha I was watching your video and thinking that and BLAM you say exactly what I was thinking. Keep it real and keep sharing. If you do it let me know ASAP would love to know you’re thoughts and results. Thank you

@karl_alan 5 лет назад

Love the idea if these. Liquor oak spirals were a totally untapped idea for me. I know it doean't appear you had any issues, but I am curious if whiskey or another liquor could cause issues in that the wood has observed a high amount of alcohol. Does that impact the casting of the resin at all?

@craftedworkshop 5 лет назад

Thanks Karl! These spirals were unused, so I didn't experience any issues obviously, but I would imagine that, as long as they were dry, it shouldn't cause problems.

@adamfathi9192 5 лет назад

Looks amazing. Great video. Just one question, if you were commisioned to build 20, why build the display to only hold 18?

@TommyArianoutsos 5 лет назад

Very cool! When you first started I was wondering how you got the spiral effect. Imagine having to do that yourself. Jay Bates just put out a video about tool path setup on a cnc. Very educational. Also that lathe buffing setup is genius!

@craftedworkshop 5 лет назад

Yup, just watched Jay's video this morning, great stuff as always! And yea, that spiral effect would be a PAIN without a machine to do it for you. Thanks!

@matthewjhicks123 5 лет назад

Wanting to try some turning projects next year! Cool stuff!

@rajivdighe1138 4 года назад

Just came across this video today. curious if you had to use mold release in your 3d printed molds? also, was it standard PLA filament you used to print molds?

@Zack_Johnson 5 лет назад

Turned out great man!! Zach Johnson gotcha!!

@craftedworkshop 5 лет назад

Hah, thanks!

@zachjohnson41 5 лет назад

lol That you did, Zack! Cool build, Johny

@MadduxWoodworks 5 лет назад

Those “turned” out awesome Johnny!

@craftedworkshop 5 лет назад

Thanks! 😊

@debybrooke157 5 лет назад

Man those are nice! Wish I had been there to help you turn some of them!

@StudioJLT 5 лет назад

Very cool - that spiral wood was new to me

@craftedworkshop 5 лет назад

Thanks!

@80zbabyz 5 лет назад

Great work man . Just found ur channel I’m hooked

@craftedworkshop 5 лет назад

Thanks and welcome!

@MultiTom1956 5 лет назад

Beautifully done 👌

@craftedworkshop 5 лет назад

Thanks!

@DreitTheDarkDragon 5 лет назад

That phone flash at 6:45 gave me idea - what if you put LED inside instead of screw? It might make really nice decorative light :)

@craftedworkshop 5 лет назад

That’d be cool!

@SeanFoushee 5 лет назад

Love how those turned out, was the spiral dowel new or was it one that had already been used during their finishing?

@craftedworkshop 5 лет назад

Thanks! It was new, as to avoid any issues with spirits and epoxy mixing.

@carlosperea8021 5 лет назад

Johnny - would you consider doing some fun picture frames as a video? I'd love to see your take on it, and they'd make great gifts.

@craftedworkshop 5 лет назад

That'd be cool, never actually made a picture frame!

@carlosperea8021 5 лет назад

@@craftedworkshop please do! Can't wait to see it!

@19tstephens 5 лет назад

I've been looking forward to the details on this one. The Instagram pics were a good teaser.

@craftedworkshop 5 лет назад

Thanks, glad the Instagram posts teased it well :)

@JoeMakes 5 лет назад

Dude, that's a great upcycle idea! Now turn that Sketchup into Fusion 360, haha

@craftedworkshop 5 лет назад

Hah, thanks man! I’m just so comfortable with SketchUp, we’ll see if. I ever switch.

@JoeMakes 5 лет назад

@@craftedworkshop Totally; I made the switch a couple years ago but it was worth the pain!

@PahjoDesigns 5 лет назад

Nice job, man. Quality video editing as well. ;)

@craftedworkshop 5 лет назад

Thanks!

@utseay 5 лет назад

Amazing.

@craftedworkshop 5 лет назад

Thanks!

@lifeanywhere 5 лет назад

How much are they a piece, Johnny? Do you know?

@craftedworkshop 5 лет назад

$50!

@steenfraosterbro3268 5 лет назад

yeah I would probably add some screws from the back just in case I drop my heavy winter coat on top of it.

@scottb.2022 5 лет назад

Was that a pressure pot or vacuum pot that you used? Always thought people used vacuum pots to remove air from epoxy.

@craftedworkshop 5 лет назад

Pressure pot. They both have different purposes, with a vacuum pot usually being used for stabilization.

@MikeTheMaker1 5 лет назад

@@craftedworkshop Whats the purpose for pressure pot?

@ziyaaddocrat5185 5 лет назад

Cool video

@adamb2619 5 лет назад

Nice turning project. However, I prefer the friction finishes over ca. CA can end up being an absolute mess to deal with

@craftedworkshop 5 лет назад

Yea I had good results with the friction finish so I’ll probably stick with it!

@jcsama1 5 лет назад

Awesome vid

@craftedworkshop 5 лет назад

Thanks!

@prakashgudimetlagudimetlap2533 5 лет назад

Wow super

@craftedworkshop 5 лет назад

Thanks!

@raocharly6145 5 лет назад

Where do learn this craft in London.

@rcache4 5 лет назад

Definition: Bottle Stopper: A fun and popular gift made by wood turners for their wine drinking friends to save leftover wine Leftover Wine: A phrase that is not understood by the wine drinking friends

@MrMusic464 5 лет назад

What's up nice vid bro

@worldworldyoutube1979 5 лет назад

Can anybody tell me epoxy for table is available at paint shop? And price?

@harrisoncraven5785 5 лет назад

I like it very good job get a drink 🍺🍺 ok from Harrison

@craftedworkshop 5 лет назад

Thanks Harrison!

@reforzar 5 лет назад

Do everything turn turn turn.

@craftedworkshop 5 лет назад

😂

@yelesaycholak5847 5 лет назад

7th one to like this vid!

@craftedworkshop 5 лет назад

Thanks for being here early!

@yelesaycholak5847 5 лет назад

Crafted Workshop You’re welcome 😉.... it’s awesome to be here when the notification just pops up.

@zacharybrosious2293 5 лет назад

If you did this 20 years ago you could have used film canisters

@craftedworkshop 5 лет назад

Hah, true!

@joshuadefibaugh3634 5 лет назад

Why do you need that many bottle stoppers? We’re not judging or anything. Just kidding. These are incredible!

@craftedworkshop 5 лет назад

Hah, for a local distillery! Thanks.

@DreitTheDarkDragon 5 лет назад

"local" you say? ;)

@bananafingerguns7212 5 лет назад

Coy fish and Japanese style tattoos are the new tribal. Did it come with a Monster Energy drink and and Imagine Dragons tickets?

@craftedworkshop 5 лет назад

No koi fish, it's an owl and it symbolizes my wife. Japanese tattoo design is some of the most beautiful out there, plus the history and culture around Japanese tattooing is fascinating. Also, I hate energy drinks and Imagine Dragons. But go ahead and be presumptuous if you want!

@brickdaddiy 5 лет назад

Why make just 1 when you can make 20?!

@justiny.6647 5 лет назад

Cewl

@craftedworkshop 5 лет назад

Thanks!

@jcsama1 5 лет назад

First

@craftedworkshop 5 лет назад

Congrats!

@quintendewit3220 5 лет назад

What did you study in school ?? I am 14 and want to make a big change in my life

@craftedworkshop 5 лет назад

Computer Information Systems! Had nothing to do with woodworking, just learned this stuff through RU-vid, reading, and trial and error.

@quintendewit3220 5 лет назад

@@craftedworkshop thank you

@Steelcrafted 5 лет назад

Carbide for hand turning is straight garbage....a softer material will always yield to a harder material, and you don't need carbide to turn wood and epoxy...HSS can have much more aggressive tool geometry, and is super simple to sharpen....that square insert you are using doesn't have enough clearance angles to cut nicely on soft materials like wood and epoxy.....the video and the results are amazing....but you are better than carbide....just had to throw that out there 🍻

@worldworldyoutube1979 5 лет назад

Can anybody tell me epoxy for table is available at paint shop? And price?

@christhornesrensen6519 5 лет назад

First

@craftedworkshop 5 лет назад

Almost!

@worldworldyoutube1979 5 лет назад

Can anybody tell me epoxy for table is available at paint shop? And price?