Тёмный

DIY Exhaust! - Is it Worth It? 

Donut
Подписаться 9 млн
Просмотров 3,1 млн
50% 1

Thanks to Ebay Motors for sponsoring this video! CLICK here ebayvehicle.com/app/Donut to search through thousands of cars and parts & list those project cars and spare parts sitting around!
Soooo yes we've done a few episodes on exhausts in the past, BUT today we graduate from buying a full exhaust to buying raw materials so we can make our own! Having a loud exhaust is not only rad but it helps the driver with shifting times. And we are 100% into being the best rally drivers in the world so that means we need to make the e36 the best it can be. As our homegirl J.Lo said "let's get loud people." (Jobe hates this joke but I still kept it ... haha). Go watch the vid!
We have a new(ish) channel!
/ @donutpodcasts
Money Pit is where you get to learn about cars as we work on them. Each ep we’ll breakdown how each component works and then we’ll upgrade it. Join us in our journey to build cool cars, learn about them, and drive the crap out of them!
Some of our best videos ever are coming out soon, stay tuned so you won't miss a thing!
►Subscribe here: bit.ly/1JQ3qvO
Check out more Donut Media Videos: • Evolution of the Porsc...
Want a Donut shirt or sticker? Visit shop.donut.media/
Like us on Facebook: / donutmedia
Click here if you want to learn more about Donut Media: www.donut.media/
Donut Media is at the center of digital media for the next generation of automotive and motorsports enthusiasts. We are drivers, drifters, and car enthusiasts who love to tell stories.
#DonutMedia #MoneyPit #DIY

Авто/Мото

Опубликовано:

 

14 сен 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 3,1 тыс.   
@Donut
@Donut 2 года назад
How loud is your skid plate? lol
@johnbarron4843
@johnbarron4843 2 года назад
Jeremiah sucks
@davidslagle690
@davidslagle690 2 года назад
Very loud😂
@theunpretentiousvegan8593
@theunpretentiousvegan8593 2 года назад
Depends on how low your car is.
@KSShel
@KSShel 2 года назад
My skid plate is really loud. It’s even better when I’m cruising at 70MPH. 👌
@silentassasin7989
@silentassasin7989 2 года назад
Jokes on you my harmonic just smacks the ground for me
@nothingleft99
@nothingleft99 2 года назад
never thought i’d get to see 20 minutes of Zach laying pipe, what a day!
@TheQuilava96
@TheQuilava96 2 года назад
I love how you worded that.
@waynesaldanha361
@waynesaldanha361 2 года назад
Underrated comment
@RobertEdits
@RobertEdits 2 года назад
😂😂😂😂😂
@hiigara2085
@hiigara2085 2 года назад
Mmm I'm unsure I want to see Zach lay pipe no matter how handsome he is ☺️
@5cylinderdreamz
@5cylinderdreamz 2 года назад
@@ainkpusing4263 what
@Djgarey14
@Djgarey14 2 года назад
Can we appreciate how much these guys work to film, work on the car, edit, brainstorm the next big idea, and do it all over again. Mad respect
@t2iskyler
@t2iskyler 2 года назад
Other then the fact he blatantly shows everyone at home how to make phosgene gas and kill them selves. Brake cleaner and welding = huge no no
@ArtuMormar
@ArtuMormar 2 года назад
@@t2iskyler not everyone is a smartAzzz
@gc4076
@gc4076 2 года назад
@@ArtuMormar smartass? Wouldnt you prefer them to show otherwise so the idiots of the internet DONT do it? I would say so
@ThaHammieJaassee
@ThaHammieJaassee 2 года назад
Thats why rhey habe 5 millions subs
@conceptofthemind5877
@conceptofthemind5877 2 года назад
Yes we can *bob the builder voice*
@TheFabricatorSeries
@TheFabricatorSeries 2 года назад
I STRONGLY encourage you guys to come to Vegas for a TIG welding class. I'll totally hook you up 👍
@adamsmith4953
@adamsmith4953 2 года назад
This is a sick invite Zach! You guys should take him up on the offer
@chrisbodry7919
@chrisbodry7919 2 года назад
Yea I love his videos too, his channel is what got me interested in learning to fabricate my own stuff. Cant weld yet though 😐
@miraclemansgarage5647
@miraclemansgarage5647 2 года назад
Hope they do get in touch coz I'm sick of seeing below average welds being passed as decent 🤦‍♂️
@cheese3enjoyer
@cheese3enjoyer 2 года назад
@@miraclemansgarage5647 show ur your welds
@AbdullahNLM
@AbdullahNLM 2 года назад
Sir do you really have time to watch RU-vid videos
@adambrand5692
@adambrand5692 2 года назад
This episode as a whole might be one of Donut’s best ones shot. Editing, Music, Zach, Topic, the whole thing. 10/10
@naturalcauses1695
@naturalcauses1695 2 года назад
No muffler sucks, couldve planned it better
@drsipp407
@drsipp407 Год назад
@@naturalcauses1695 stay mad
@MidnightMarrow
@MidnightMarrow Год назад
@@naturalcauses1695 Wasn't meant to be amazing or perfect, it's learning how to do something whilst just doing it. Turned out far better than most peoples shitjobs.
@dub537h5
@dub537h5 Год назад
@Natural Causes agreed. Instead of modifying the car to fit his selected muffler, or simply grab a shorter muffler, he chooses TRASH straight pipes. At least he proves that one of the donut crew actually has technical ability though!
@abstractworld2929
@abstractworld2929 Год назад
I’m not even familiar with the series but this was definitely an awesome video!
@ShockzZiFy
@ShockzZiFy 2 года назад
Man that skid plate looks an awful lot like a brand new exhaust
@mcdamn_it
@mcdamn_it 2 года назад
Yep. I said the same thing too
@medved5450
@medved5450 2 года назад
Well, now we know what will be the next money pit episode
@IsaacPoopsAlot
@IsaacPoopsAlot 2 года назад
LOL I WAS ABOUT TO SAY I THOUGHT I WAS TRIPPIN
@htwcustoms4209
@htwcustoms4209 2 года назад
I was about to say the same
@preworkoutcoffee2604
@preworkoutcoffee2604 2 года назад
sKiDpLaTe LeAk
@justbob242
@justbob242 2 года назад
I love watching Garage Jesus. This guy is so relaxing to watch.
@danieljurk7820
@danieljurk7820 2 года назад
That should be his official host name XD
@fachrieandikap9407
@fachrieandikap9407 2 года назад
I’ve been searching for this comment
@blkoutbandit4017
@blkoutbandit4017 2 года назад
Garage Jesus 😂😂👌🏼
@sleazymeezy
@sleazymeezy 2 года назад
Our father. Who art in the garage, upgrades be thy name. Thy parts shall come. Thy will be done, on the street as it is off road
@Jimbo7
@Jimbo7 2 года назад
@@sleazymeezy reads like some shit from mad max lmao
@dan-m.mitreanu2147
@dan-m.mitreanu2147 2 года назад
"So we're just gonna go with straight pipes" Everyone liked that
@jaymichaelruss6872
@jaymichaelruss6872 2 года назад
It wasn’t truly straight piped though. He just did a muffler delete. Straight pipes or straight piped is when you delete any and all mufflers and catalytic converters. So yea, technically he just did a muffler delete.
@dsrocks6905
@dsrocks6905 Год назад
@@jaymichaelruss6872 eh. There aren't crossovers and it's an entirely fresh custom mid-pipe all the way to the back with no muffling devices and no unnecessary bends. I'd call it a straight pipe because of the better flow optimization vs your average muffler delete.
@jed3219
@jed3219 2 года назад
As a welder fabricator, I'd love to see a follow up on how the exhaust holds up over time, instead of back purging too you can use solar flux next time for when you don't want to use the extra argon, the welds become more brittle when you don't back purge too it's not just about the aesthetic and its tendency for rusting quicker, it's worth doing at least a backing plate or something, love what you guys are doing! Killing it for how fresh you guys are, keep at it :)
@GoPaintman
@GoPaintman 2 года назад
Should’ve mentioned that cleaning your parts with brake parts cleaner can be extremely dangerous. If your brake cleaner contains tetrachloroethylene, you can expose yourself to an extremely poisonous gas when welding. A lot of the “50 state” brake parts cleaner no longer contains this chemical, they use acetone instead. But always check, and it’s honestly safer to use acetone by itself.
@rodanone4895
@rodanone4895 2 года назад
one hundred and ten percent!!! acetone. and be careful with the acetone. some have oils and grease remnants emulsified when you buy it. apparently there is reagent grade acetone where this ingredient is controlled. but i can't find it. i start with acetone. then scrub again with a dry cloth. the danger them becomes lint... shop vac. then weld. tom eager from MIT has an amazing series on RU-vid for welding metallurgy, fusion welding etc .. but, the algorithm is unlikely to recommend it. he talks often of welding cleanliness even with low carbon steel.
@constantproject1450
@constantproject1450 2 года назад
I was literally just about to say the same thing when I saw him using brake cleaner. No bueno
@FleetTech97
@FleetTech97 2 года назад
It creates mustard gas right? I know when I was working in the mines I got told about a welder who cleaned up a bunch of oil with brake clean then welded in the area and ended up dying because of it
@rodanone4895
@rodanone4895 2 года назад
@@FleetTech97 phosgene i believe can be created. but chlorine gas by itself also happens and will cause immediate acid products straight on the lung walls. mustard gas has sulfer, where the yellow comes from, and sulfer occurs in steel so it is probably also a byproduct. keep chlorine away for so so many reasons. it corrodes stainless.... as you say: no bueno. word.
@kineticinstallationspecial5775
@kineticinstallationspecial5775 2 года назад
You want non chlorinated brake cleaner. It's all I buy to avoid that very dangerous situation.
@philipv-twin1599
@philipv-twin1599 2 года назад
Be careful using brake clean, chlorinated produces a deadly gas when welding. I use acetone personally 👍🏼
@marcoconci7867
@marcoconci7867 2 года назад
isn't brake cleaner just ethanol?
@josiahargueta9389
@josiahargueta9389 2 года назад
Thank you I’m barely getting into welding
@jr303official
@jr303official 2 года назад
I was wondering about this, can you use non- chlorinated brake cleaner? I was always thought never use brake cleaner on areas your about to weld on.
@Maroco918
@Maroco918 2 года назад
@@marcoconci7867 Depends on the brand
@wickett7078
@wickett7078 2 года назад
I've heard stay away from all brake cleans to be safe
@sebastiansolis3279
@sebastiansolis3279 2 года назад
I feel like Zach is the embodiment of the saying, “Where there’s a will, there’s a way.” Keeps me motivated
@TheIcyWulf
@TheIcyWulf 2 года назад
Donut's content quality has gone through the roof this last while. Every video makes me go "Wow, they put real effort into that." Be it the builds, the information, the camera angles, or the editing, every aspect of these videos are becoming better by the week.
@HeyPlebes
@HeyPlebes 2 года назад
Also their Instagram admin deserves a shoutout 😂
@JanBabiuchHall
@JanBabiuchHall 2 года назад
Whoever picked the music for this episode, you deserve a raise.
@konstantinosmparmpounis6464
@konstantinosmparmpounis6464 2 года назад
It was pretty vibey
@nathans9861
@nathans9861 2 года назад
Donut is always on point with their music
@richiedagger733
@richiedagger733 2 года назад
I disagree strongly.... but to each their own
@isaiahmckeown-philip1238
@isaiahmckeown-philip1238 2 года назад
@@richiedagger733 the music itself is catchy and well made but I personally find it off-taste with how it was applied. Like you said, to each their own
@heathcliffhappy2582
@heathcliffhappy2582 2 года назад
i flet it's the same from previous episodes, what do you mean?
@themememan1798
@themememan1798 2 года назад
Its cool when you can actually say to yourself "wow i can do that", being a welder and not a mechanic personally
@WarriorsPhoto
@WarriorsPhoto 2 года назад
Have you ever tried to become one?
@oriolgonzalez9328
@oriolgonzalez9328 2 года назад
Well, you could become an exhaust builder
@Heroo01
@Heroo01 2 года назад
Honestly dude it's totally doable for anyone really. Can't learn until you try though!
@michaelgray8986
@michaelgray8986 2 года назад
One tip for your welding, use 1/32 filler rod so you don't have to get it so hot and you will be amazed how much better it looks and how much easier it is to control!
@howlettfitness8374
@howlettfitness8374 2 года назад
I like when someone is honest about if something might be difficult. Most people say "it's real easy" about everything when some things might not be. Your honesty helps
@ozdunder
@ozdunder 2 года назад
i know its unlikely, but i'd love to see this participate in an actual rally event
@remingtonspeed7481
@remingtonspeed7481 2 года назад
Use those fluffy toaster powers to help reach that goal. Eat enough RAM and simulate the vehicle dynamics to help Zach navigate.
@ozdunder
@ozdunder 2 года назад
@@remingtonspeed7481 idk man, my super fluffy toaster powers were seriously affected when my mum dropped me on my head several times as a child
@heathcliffhappy2582
@heathcliffhappy2582 2 года назад
do you remember one of the hi and low cars broke down completly
@fraserlewis5767
@fraserlewis5767 2 года назад
As a tig welder I appreciate you at least mentioning back purging being the right way to do it. Instead of buying plugs you can use tape or aluminum foil next time but either way good learning experience 👍
@CandidKiller
@CandidKiller 2 года назад
Agreed as a tig welder myself, aluminum so it’s a lot different, but I’d say more gas and weld kinda in segments like a inch worms body, you’ll get good dimes like that even without back purge 👍🏼
@nickthelebo
@nickthelebo 2 года назад
@@CandidKiller but the insides of the pipe will crystallise and will not have proper fusion with out purge on stainless and with heat and vibration the join is the weak point so it normally cracks (edit .. when welding stainless I'm talking aluminium there is no need to purge )
@fatpad00
@fatpad00 2 года назад
@@nickthelebo What is the actual purpose of the argon? I assume, because it is inert, that it basically blows away atmospheric gasses that would react with the molten fresh weld? Is that what the crystallization you mentioned is?
@CandidKiller
@CandidKiller 2 года назад
@@nickthelebo Did not know about the necessary back purge for stainless, glad you informed me. I’ve only been professionally welding for almost 3 years and started with mig then went to tig and do aluminum now at work and we do a little mild steel so nothing we do requires back purge
@CandidKiller
@CandidKiller 2 года назад
@@fatpad00 Argon in short is what you use to weld, it’s a gas, and it allows for the weld to lay cleanly, without argon it’s a bubbly mess and you’ll never get a weld down, we use 75% argon and 25% helium for aluminum at work but all metals can use 100% argon, don’t quote me, but like steel can’t have the helium, they make another mixture for that. Again don’t quote me I’ve only welded a few years
@jarviskarchewski6556
@jarviskarchewski6556 2 года назад
Found Zach on a random RU-vid algo a few months ago when I had my interest piqued in working on my car...had already done Stage 1 on it but was hmming and haahing about going stage 2 doing all the work myself. This man inspired me to start thinking beyond the bare minimums of what I would need to make it more successful and reliable, and now I'm going to drop a turbo into the car after putting in all the little things to prep the car for that. Keep crushing it Zach and Donut Media! Loving your guys' content, especially Moneypit and HILow!
@ghostnic8
@ghostnic8 2 года назад
I welded up a couple full-length 3" pipes, one for our CHUMP car and one for my E36 ti track car. There is really nothing like the sound of an uncorked BMW i6. I'll never forget the first time I ran it up. WOW I had no idea it could sound that cool. BUT it also made a HUGE difference over the stock exhaust of the M52b28 with S52 cams. Thanks for this one, it was fun to relive it a bit.
@scottthomas8136
@scottthomas8136 2 года назад
I made my first set of custom headers when I was 15. Was it perfect? No. Was I incredibly proud of it? Yes. It’s the experience that makes it worth it.
@NoWr2Run
@NoWr2Run 2 года назад
DAMN STRAIGHT.
@iseemanstas5193
@iseemanstas5193 2 года назад
Any advice on it? Tryna make new headers for my bike because the old ones are close to 40 years old and have a couple rust holes. I have a MIG welder but I'm a shit welder and don't have much in the way of cutting the angles I need.
@CJONE764
@CJONE764 Год назад
@@iseemanstas5193 honestly? I wouldn't mig weld them. It just won't look good and isn't the right tool for the job. See if you can get yourself a tig welder and a bottle of gas. If not, have you thought about college? I did a set of down pipes for my ZX6R when I was at college learning to to fabrication. It went into my portfolio for my qualification, I learnt something and I got something out of it. (This was 15 years ago though)
@MarcusRayGonzalez
@MarcusRayGonzalez 2 года назад
It’s been fun watching Zach’s hair grow every episode
@macky4611
@macky4611 2 года назад
He should keep a mustache and cut his hair into a mullet!
@chuckingram5966
@chuckingram5966 2 года назад
@@macky4611 mullet equals hick hub haircut LOL
@Glacier_6.7
@Glacier_6.7 2 года назад
@@macky4611 I agree
@tannerschow1715
@tannerschow1715 2 года назад
He looks like white Jesus
@lil_dawgblack1086
@lil_dawgblack1086 2 года назад
I love how this channel has certain people for different type of vídeos , everyone gets a part
@sambarlow-fletcher118
@sambarlow-fletcher118 2 года назад
This is probably the best donut media episode I have seen! Love seeing the full process and actual in house creation. PS, I need straight pipes in my life!
@MrNeelmatt
@MrNeelmatt 2 года назад
That 8° bend trick is golden. Thank you Zach!
@mikcute9510
@mikcute9510 2 года назад
I kinda don’t get why? Why not just cut 8 degrees?
@DezziDuck
@DezziDuck 2 года назад
@@mikcute9510 cus if you cut it at 8°, how will you attach the two pipes to maintain that 8° bend? No matter how you'd attach it, it would either have no bend, or have a 16° bend. Or, you could just use the cut pipe and another piece of straight pipe, but that isn't an efficient use of materials.
@mikcute9510
@mikcute9510 2 года назад
@@DezziDuck ahh i see, thank youuu
@MrTheHillfolk
@MrTheHillfolk 2 года назад
Go much more than that 8 degrees, and you should really use a mandrel bend and weld that in.
@seanmoyer4563
@seanmoyer4563 2 года назад
Give her the ol' 8"&8°.
@AndrewCollins7
@AndrewCollins7 2 года назад
The custom exhaust is awesome, and I'm envious of those welds, but can I just say that the Hi-Low bumpers on the shop wall in the background are the piece de resistance.
@quadzilla7572
@quadzilla7572 2 года назад
I saw those and thought to myself is that the 350z numbers but wasn't sure lol I wonder what they did with those cars?
@cseibert96
@cseibert96 2 года назад
@@quadzilla7572 the cars are sitting at the Peterson Automotive Museum in the Vault.
@MikeJ2319
@MikeJ2319 2 года назад
👏🏽👏🏽👏🏽 4 days from start to finish?!?! Welding process was dope! And definitely improved from the stock exhaust 10/10
@pspitty2676
@pspitty2676 Год назад
I been watching y’all a lot lately but when I see you teaching us all a bit about welding and making your own exhaust that is so cool to me thank you
@AutoSearPin
@AutoSearPin 2 года назад
Best sounding skid plate I’ve heard in a while!
@justinsideher501
@justinsideher501 2 года назад
Cat fella wassup
@averyflock3435
@averyflock3435 2 года назад
@Just Dope nolan
@benjaminlohier
@benjaminlohier 2 года назад
Who knew a skid plate could sounds that great...
@benjaminlohier
@benjaminlohier 2 года назад
@Just Dope shitty SPAM
@Donut
@Donut 2 года назад
lol
@kip258
@kip258 2 года назад
Holy heck. The link spam in this thread is out of control.
@Bugside
@Bugside 2 года назад
@@kip258 report them all
@guycha0s380
@guycha0s380 2 года назад
Report those bots
@jamespaul7256
@jamespaul7256 2 года назад
Shout out from Australia, love donut media. Great episode Zach, awesome work, sick exhaust note. As a bloke who has all the tools and typically thinks he can do anything better than store bought, I tend to over simplify the process in my head and drastically underestimate the time needed ……I also have a time hungry toddler running around my house and workshop, so this has convinced me to just buy a pre-fab exhaust based on time alone 🤘cheers bro, keep up the good work!
@servano08
@servano08 2 года назад
Not even mod related but I really reaally appreciate that ya'll took your time to explain and show welding!
@rouge5140
@rouge5140 2 года назад
Yes worth it. A skid plate isn't something that's very complicated to engineer, it's just thick sheet metal under a car.
@angelesc2033
@angelesc2033 2 года назад
Lmao same here
@mcdamn_it
@mcdamn_it 2 года назад
Didn't watch did ya? Shits an exhaust video
@notfunny3397
@notfunny3397 2 года назад
@@mcdamn_it didn't watch the video one millisecond after it came out did ya. It was called a skidplate video
@angelesc2033
@angelesc2033 2 года назад
@@notfunny3397 yes was confused for a second
@readmyusernamecauseitssoreally
@readmyusernamecauseitssoreally 2 года назад
@@mcdamn_it the title was obviously a mistake
@nick94657
@nick94657 2 года назад
I like the DIY/Don't stuff, because it gives me insight into things I want to try (especially when everyone's so expensive and or busy), and also teaches some info people seem to gloss over.
@patrickdowd3095
@patrickdowd3095 Год назад
i used to weld this stuff for pharma and food, mostly programing robots to do it all for me, jobe did a fantastic job of explaining the process and picking it up! very impressive!!!
@LonelySandwich
@LonelySandwich 2 года назад
Wow that was really impressive welding
@86mustang
@86mustang 2 года назад
Do you watch every single video
@aravpanwar2431
@aravpanwar2431 2 года назад
@@86mustang he's lonely.
@skiptastic1000
@skiptastic1000 2 года назад
too much heat, low travel speeds, thats why its grey
@anonymousarmadillo6589
@anonymousarmadillo6589 2 года назад
@@skiptastic1000 and too little argon
@Shaun-hp2yz
@Shaun-hp2yz 2 года назад
I see you everywhere!
@aboriani
@aboriani 2 года назад
"Shut the hell up! Trying to weld over here!" Well, it's obvious we need a t-shirt with that
@MasterSpaz
@MasterSpaz 2 года назад
Or at least a sticker for our own helmets
@unstop2910
@unstop2910 2 года назад
I agree
@deathanddismembermen
@deathanddismembermen 2 года назад
Good job getting used to the TIG. Learning how far you can choke up on it and the distance for you arc was the best part for me. And when you get a good rainbow pattern and it looks like you have laid down a row dimes you can’t help but smile.
@bracket0398
@bracket0398 2 года назад
Fun to watch you do this stuff Jobe. You have a huge interest in it, have fun with it, like showing how to do it. Good stuff, keep it up!
@JayFude
@JayFude 2 года назад
Remember the words of AvE: "A grinder and paint make me the welder I ain't"!
@calholli
@calholli 2 года назад
That's at least 100 years older that AvE.. lol
@ainkpusing4263
@ainkpusing4263 2 года назад
THE SEXY GIRLS ARE BIGTITITS.UNO THREE IN ONE RU-vid: THIS IS FINE. SOMEONE: SAYS ''HECK''. RU-vid: BE GONE Life's story is a short journey so have fun before sleeping forever #Чо #эт #делает #на #2 #месте #в #тренде #однако #я #люблю #таких #рыбаков .#垃圾.
@cablenowadays6586
@cablenowadays6586 2 года назад
We want to be welders! Not grinders!
@pbgd3
@pbgd3 2 года назад
Think his is bigger the gawb better the jawb
@JayFude
@JayFude 2 года назад
@@pbgd3 yep, that's his too. Make sure to tappy tap tap it with a thumb detecting nut fucker!
@amicloud_yt
@amicloud_yt 2 года назад
The whole "Get your Beans at Beans Beans" thing kills me everytime
@AsdfAsdf-td7ju
@AsdfAsdf-td7ju 2 года назад
Did they have to change the original song? It used to be the whole “Yota Taco” phrase, now it’s just beans😂
@MarkZielonko
@MarkZielonko 2 года назад
@@AsdfAsdf-td7ju where did the original come from? Post a link if you can!
@sport0182
@sport0182 2 года назад
pro tip on welding.. get closer with the electrode (
@Polarbayr308
@Polarbayr308 2 года назад
Ive done Stick and MIG welding but TIG is still on the list of things to try, Definitely seems like the most involved but some of the beads can come out beautiful, sounds good and looks good to boot!
@lukethenuke7538
@lukethenuke7538 2 года назад
"Will the exhaust be louder?" "yeah but that's not the po..." *IT'S WORTH IT*
@GhostOfDamned
@GhostOfDamned 2 года назад
Lmao
@3sgtepwnzr
@3sgtepwnzr 2 года назад
First off, if that was your first time welding…amazing job! Second, check out stainless autogenous pulse tig, it has totally changed how I weld stainless exhaust. I understand this is a beater but it was my understanding that you shouldn’t stiff weld the exhaust to the chassis as the vibrations will cause some points of it to crack (hopefully not near the headers. The hanger needs bushings. Also, what a lovely head of hair.
@crisnmaryfam7344
@crisnmaryfam7344 2 года назад
the solid mount is often done in rally cars for the extra clearance it can provide. You also often see solid chassis mounted engine and trans mounts too. All sorts of vibration going on and often its not the exhaust that breaks.
@3sgtepwnzr
@3sgtepwnzr 2 года назад
@@crisnmaryfam7344 thank you for the imparted knowledge 🙏
@JackoJakl
@JackoJakl 2 года назад
The filler is helpful for extra strength I would think, autogenous welds are nice because you use only the material you're welding, but it can leave the material a bit weaker than a good filler bead with back purging. This is just my experience though so if I'm incorrect I apologize lol
@3sgtepwnzr
@3sgtepwnzr 2 года назад
@@JackoJakl I understand, my applications are for small pipes motorcycle exhaust. The radius is quite small so using filler is quite difficult.
@1959BB
@1959BB Год назад
I appreciate you guys being honest in this saying it took 4 full days. I get people coming to my fabrication shop saying they've seen on RU-vid that an exhaust can be made in 14 minutes etc. In terms of the welds on the pipes, back purging would tidy them up nicely as it makes the base material more stable. nice job though.
@northernkushreviews7335
@northernkushreviews7335 Год назад
I love that you guys do a great job with the closed captioning because when I'm too high I need to read them!
@sargentscythe
@sargentscythe 2 года назад
That's a weirdly shaped skid plate lol
@zaboo4088
@zaboo4088 2 года назад
Yea did they title this wrong lol
@jaipanday2800
@jaipanday2800 2 года назад
I love how quick Zach decided not to install the muffler. One look at the space "ahh nah it ain't gonna fit"...and throws out the $150 part
@FloridaManFotoz
@FloridaManFotoz Год назад
Bro you’re awesome never afraid to take on anything. I’m jealous of your tool selection
@naterbiker321
@naterbiker321 2 года назад
Can confirm, diy exhaust can be decent with some trial and error. I had my 2008 honda fit straight piped from the cat for a while but recently put in a 2.5" inlet to 4" outlet 18" long muffler tip from evil energy on amazon and now my car has a nice deep tone.
@pandacocoa
@pandacocoa 2 года назад
You should do this for a cold air intake, that would compliment the exhaust perfectly!
@benvetter6239
@benvetter6239 2 года назад
Zach "It's a fun, durable, reliable car that we can beat up off road and it seems to enjoy it" Zach's hair "That's what she said"
@SuperWaterskiboy
@SuperWaterskiboy 2 года назад
hey Jobe! i work in new product development for Miller. Awesome to see yall have Miller in the shop! as far as your curiosity goes.. I did a lot of drumming when i was younger and can say that i am naturally better at tig than any other form of welding.
@NevaSmoove
@NevaSmoove 2 года назад
Tell the soundengineer this episode was a masterpiece!
@jordanzimmerman4818
@jordanzimmerman4818 2 года назад
I've been watching since tuerk was teaching us how to hoon our moms mini van and our dads pick up truck. the evolution and growth is absolutely amazing, by far my favorite channel. keep up the great work guys, can't wait to see where y'all take it from here.
@joshpiotrowski3487
@joshpiotrowski3487 2 года назад
Should still bring back bart
@C4_stephen
@C4_stephen 2 года назад
@@joshpiotrowski3487 It's not like they kicked him out, he left to care for his family I think 🤔
@joshpiotrowski3487
@joshpiotrowski3487 2 года назад
@@C4_stephen I think it was both. A family thing and not seeing eye to eye. Look up the comments on the old science garage vids I think there's reddit threads too
@darkscrap3347
@darkscrap3347 2 года назад
"no matter what type of welding you're doing clean your materal" *laughs in farmers rod*
@teebee4892
@teebee4892 2 года назад
When he said that my first thought was “ I know a rod that would disagree “
@josephheinrichs2050
@josephheinrichs2050 2 года назад
Gotta love a good rust buster rod
@7eis
@7eis 2 года назад
A farmers rod with all the amps makes a great way to punch holes in thick metal for easy access to repairs.. Or so I'm told😏
@Prestiged_peck
@Prestiged_peck 2 года назад
He used brake clean too and I was just immediately going NO ZACH DON'T DO IT
@junkyardboost8372
@junkyardboost8372 2 года назад
@@Prestiged_peck as long as it’s non chlorinated it’ll be ok. Acetone would be a better choice.
@Felipera_
@Felipera_ 9 месяцев назад
Drummer + Welder here (amateur on both sides): it does help! Hand-eye coordination comes in handy, as well as the ability to keep a steady rhythm while feeding the material into the arc. Often you do that to a constant beat to achieve an uniform weld.
@kegankelly3073
@kegankelly3073 2 года назад
I have a 2012 F30 3 series & building my own exhaust is one of the best decisions I ever made. (N20 sitting at 380 wheel hp & 440 wheel tq mated to the ZF 8 speed. 4 seconds to 60 & 12 second 1/4 mile.)
@nategilliland4054
@nategilliland4054 2 года назад
Doing your own exhaust is always worth it I did my own true duals into 2 single chambers myself definitely best thing you can do
@Gowaduv
@Gowaduv 2 года назад
We bought this Borla exhaust, these tips ... and threw them away! Nice work on the straight pipes. That is gonna sound so good on course
@forzettocorsa
@forzettocorsa 2 года назад
One of the best videos I’ve seen, you introduce me to things I’ve wanted to learn but have been too scared too! One of my dream jobs would be to leave London behind me and fly out to work for you guys!
@sketchycloudgaming3581
@sketchycloudgaming3581 Год назад
seriously the stuff these guys do is exactly the stuff i would love to do eveyday any application?🤔😂
@ben501st
@ben501st 2 года назад
It's counterintuitive but a steeper angle on your electrode's tip will give you a wider arc. An electrode ground flat will create an almost laser like arc.
@ainkpusing4263
@ainkpusing4263 2 года назад
THE SEXY GIRLS ARE BIGTITITS.UNO THREE IN ONE RU-vid: THIS IS FINE. SOMEONE: SAYS ''HECK''. RU-vid: BE GONE Life's story is a short journey so have fun before sleeping forever #Чо #эт #делает #на #2 #месте #в #тренде #однако #я #люблю #таких #рыбаков .#垃圾.
@paytonlee2896
@paytonlee2896 2 года назад
Very underrated comment. To a newer welder, they may not notice. But if you do the different grinds back to back, you can really see the difference. It’s why you want a large angle (60* point) for thin metal, vs a shallow angle (15* point) for thicker metals. The large angle allows you to have a more focused arc, where the heat affected zone isn’t trying to melt a larger area of the metal.
@drftyou
@drftyou 2 года назад
Definitely my favorite video of money pit so far! Also don't knock these welds! They didn't look terrible at all!
@jdmdang
@jdmdang 2 года назад
Yeah in your case, its totally worth it. you guys got the shop and all the tools. and knowledge and continued learning and improving your skillsets on welding ..etc. plus its your own project car too so in the end all rewarding
@MichaelMcFearin
@MichaelMcFearin 7 месяцев назад
Such a relaxed dude, amazing what edibles and editing can do. Thanks for another fun chill video.
@vannirob000
@vannirob000 2 года назад
Invest in an local exhaust extraction system for welding, especially when welding after using break cleaner with TCE (phosgene) or welding on stainless steel (hexavalent chromium).
@neilbufton2926
@neilbufton2926 2 года назад
I thought the rule was straight up don't weld anything with brake cleaner on it.......EVER. "once the gas is inhaled there is a little a doctor can do except give supportive care such as ventilation" that's enough to put me off going near the stuff personally!
@engineerisengihere44
@engineerisengihere44 2 года назад
Yeah best to stay away from brake clean altogether to be safe
@lucashitchcock5642
@lucashitchcock5642 2 года назад
being a drummer, i wish i had the answer about TIG welding Jobe 😂
@memphiskash
@memphiskash 2 года назад
drummer gang
@neonnerd1364
@neonnerd1364 Год назад
I made a side exit exhaust for my built 95 neon. I used recycled pipe I had at my shop. I put a black widow neighborhater on it but it was way too loud so I threw a glasspack in front of it to act as a resonator and it calmed it down a lot. The car sounds really good.
@Caprice1977
@Caprice1977 Год назад
It always feels better building stuff on your own there’s a sense of pride that comes from it . . Good job buddy even if it’s a little rough as long as you’re happy with it that’s all that matters.
@remklovs
@remklovs 2 года назад
"Let's just keep our expectations *very low*" -me when I wake up every day
@josiahargueta9389
@josiahargueta9389 2 года назад
🤣🤣🤣😂😂😢😭😭
@bergerniklas6647
@bergerniklas6647 2 года назад
Too real man, too real
@ainkpusing4263
@ainkpusing4263 2 года назад
THE SEXY GIRLS ARE BIGTITITS.UNO THREE IN ONE RU-vid: THIS IS FINE. SOMEONE: SAYS ''HECK''. RU-vid: BE GONE Life's story is a short journey so have fun before sleeping forever #Чо #эт #делает #на #2 #месте #в #тренде #однако #я #люблю #таких #рыбаков .#垃圾.
@NoWr2Run
@NoWr2Run 2 года назад
WHAT EXPECTATIONS ? I HAVE NONE ANY MORE.
@sammarley347
@sammarley347 2 года назад
When you got rid of the muffler, my joy was so strong!!!
@FunkyBuddha81
@FunkyBuddha81 2 года назад
He is such a humble Guy and i would say a good Teacher too!
@aidanclifford501
@aidanclifford501 2 года назад
Just spotted both sets of high/low bumpers on the wall, super cool
@mikebutala17
@mikebutala17 2 года назад
Shout out to the editor, the background music was fire and completed the video well
@FALCORTON
@FALCORTON 2 года назад
I commend you Donut crew for working on Jack stands, It represents 90% of us
@VS666
@VS666 2 года назад
as two sets of MaxJacks sit in the background...
@samuelmoreau8625
@samuelmoreau8625 Год назад
I’d like to say thanks for all these video you have the most interesting tuning channel keep the good work ! From Montreal Canada 😁🤘
@bjiggles8145
@bjiggles8145 Год назад
Great stuff as always and excellent use of a welding marker. To the new welders out there take it from someone that had to learn the hard way, get some welding markers and always use them, they're worth every penny. Using Zach's 4° cut as an example, with that small of a change if you just "eyeball" it and don't weld the pieces back together at exactly 180° of rotation or if you're making a direct cut onto the item for the angle and instead of a coupler that you can position however you need to, you might find that the other end of your item is now an inch or two to the left or right of where it was supposed to be because of the slight deviation. At that point it's already too late and you'll end up either starting over or going down a rabbit hole trying to make it work. The "measure twice and cut once" philosophy is the same in welding, measure twice and weld once, you'll be glad you did.
@gamingtherapy8466
@gamingtherapy8466 2 года назад
Man y’all kill it on the promotion, by far my favorite RU-vid channel. I stay entertained through out the whole vid 🎉
@Slipnslide43
@Slipnslide43 2 года назад
I think the tips were phenomenal and the welding was amazing one tip for stainless steel is flux it’s specific for stainless, just makes the insides you said not to look at a bit cleaner without needing to backfill just a little flux on the inside and the outside just a friendly tip:)
@theinfofoxgotgears3782
@theinfofoxgotgears3782 Год назад
Not gona lie I looked up on Google to how to make rally car but no one has done one but now I found out u guys bin doing those so now u are first people on internet to show veido how to make rally car custom
@fonbekken
@fonbekken Год назад
That straight 6 sounds amazing, i love it
@Ryan.90RS
@Ryan.90RS 2 года назад
Man I swear there needs to be more show like this. Keep cranking out that dope ass content.🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘🤘
@Mr3truman
@Mr3truman 2 года назад
This is an awesome series and a great video, keep up the good work Donut!
@stevewall6811
@stevewall6811 2 года назад
The helmet flip as soon as the beat changed was on point. 9:39 good job editors.
@TY-jz7cc
@TY-jz7cc 2 года назад
Thanks for the comments. Much appreciated. Feel free to message on Whats/App / Text For questions, Investment guide and tips. ✙15512304145......
@taylorladouceur849
@taylorladouceur849 2 года назад
Great choice of music, this video was relaxing, engaging and interesting to watch. Thank you!
@AAdren
@AAdren 2 года назад
Thanks for the consistent uploads Donut ☺️ love the grind you guys do so that I can go on RU-vid and see new vids from you guys everyday for our entertainment
@viceversa4620
@viceversa4620 2 года назад
That’s so dope ! The car is coming along dope ! But I would love to see just more driving videos we watch the cars get built but not enough of it driving !
@bamahammer949
@bamahammer949 2 года назад
SAY DOPE ONE MORE TIME
@redderpredemption6839
@redderpredemption6839 2 года назад
@@bamahammer949 dope
@justatrent9809
@justatrent9809 2 года назад
Really digging this series !
@nikolaisikes6245
@nikolaisikes6245 2 года назад
I'm impressed at how good that sounds!
@RDKSP33DY
@RDKSP33DY 2 года назад
Get gas cups for the welder! They'll make the welds much higher quality, and they'll look even better. Keep it up, went to school for it, I absolutely love tig welding
@bassist21685
@bassist21685 2 года назад
Yes! I love my Pyrex cups. Totally a good and cheap investment for tig welding
@bangrntoo
@bangrntoo 2 года назад
Did you mean gas lens?? Or is it the same thing??
@RDKSP33DY
@RDKSP33DY 2 года назад
@@bangrntoo essentially the same thing yeah
@BryantKieu
@BryantKieu 2 года назад
Great video as always. Side note, don't war gloves when operating a belt sander or other similar stationary equipment like a table saw. The gloves can get pulled in causing you to hurt your fingers or worse 🤌
@Nostrum19
@Nostrum19 2 года назад
great episode,nothing like it outside. thanks for keeping us entertained
@heathcliffhappy2582
@heathcliffhappy2582 2 года назад
Wow, way to go, for going the extramile to do something different from the miata and build your own pipe. I'm absolutly aamazed by all the work that was done
@nate91198
@nate91198 2 года назад
This is truly one for the books of donuts top quality content👌
@WarriorsPhoto
@WarriorsPhoto 2 года назад
I admire your desire to learn Zack. That is admirable and it makes this show fun to watch. See you in the next episode.
@YootubeUK
@YootubeUK Год назад
Very nice, good work my man.
@grantmitchell9968
@grantmitchell9968 2 года назад
you gotta love the sound of that flat plain crank...
Далее
$12,000 vs $4,000 Transmission Upgrade
26:02
Просмотров 2,1 млн
Cheap and Easy Rally Car Mods - Were they Worth It?
14:08
Мама ударила дочь #shorts #iribaby
00:17
Is a Cat Delete Worth It?
16:34
Просмотров 5 млн
New AMG C63 vs BMW M3 vs Audi RS4: DRAG RACE
19:16
Просмотров 781 тыс.
Is a Manual Transmission Swap Worth It?
25:43
Просмотров 5 млн
Jeopardy, But For Cars
29:38
Просмотров 1,1 млн
We Bought the World's Cheapest Private Jet!
21:54
Просмотров 964 тыс.
Why Exhausts Make So Much Power😵| Explained Ep.27
12:11
Chinese Dirt Bike vs Japanese Dirt Bike
18:10
Просмотров 38 тыс.
We Put a $50,000 Engine in our $500 Ranger
33:43
Просмотров 4 млн
$800 DIY Off-Road Armor vs. $4000 Aftermarket Armor
27:30
🍁 Подрезал Ам Ам Ам
0:11
Просмотров 22 млн
Авто из Авторынка
0:45
Просмотров 694 тыс.
Запчасти под замену?
0:14
Просмотров 5 млн