If you want to build your own fiber laser engraver or cutter, join our Patreon group: / diyfiberlaser
80W JPT MOPA M7 + Feeltek 3D Galvo Head. After building a DIY fiber laser cutter, I wanted to follow it up with building a companion machine to be able to engrave graphics on my cut pieces. I chose to use a Feeltek 3D galvo head because I also want to do some deep 3D engravings in aluminum for injection molds. I chose a MOPA laser source so that I could engrave color on stainless steel parts and mark directly on some injection molded plastic parts. Stay tuned as I finally get to start using these machines in future projects!
Fiber lasers can be very dangerous, if you are going to build or use a laser, please do your research and understand the safety risks!
Component links:
- 3 Axis Moving Workbench: amzn.to/3M4oXsD
- 6 Inch Duct: amzn.to/3ZoAJkQ
- LED Interior Light Bar: amzn.to/42QCDO2
- Rubber Edge Trim: amzn.to/3m2f9ot
- DB25 Connector & cable: amzn.to/3Ztb2Q6
- Mini PC: amzn.to/42TTCij
- Computer Monitor: amzn.to/42VCZTo
- Terminal blocks: amzn.to/3zmCmVq
- Cable Raceway kit: amzn.to/434VuFk
- Stepper Motor Driver: amzn.to/3TVbKV4
- Line EMI Filter: amzn.to/3M6XK92
- Mean Well Power Supply: amzn.to/3TYCeF3
My website: www.id3ntitycr...
My design portfolio: www.id3ntitycr...
25 авг 2024