DIY Foam Insert Toolbox

Подписаться 99

Просмотров 44 тыс.

50% 1

So I’ve always been a fan of a well-organized toolbox to take with me to bike races and weekend bike trips. Abbey Tools a few months ago released a Team Issue Toolbox (www.abbeybiket...) with a well-organized foam inserts arranging many tools. After seeing this tool box it inspired me to build my own foam insert tool box. With some additional ideas found on Tool Box Wars Instagram (www.instagram....) I started my own Tool Box Project. For those that are interested in building their own foam insert tool box for themselves you are welcome to watch my video to learn how I did it and what I learned for next time.
Blog Post: mattcassell.ca...
I have no association with the website links listed below.
_______
Materials:
Water Proof Case (eg. Pelican Case) - www.canadianti...
Kaizen Foam Sheets - kaizencasesand...
Polypropylene Webbing - www.amazon.ca/...
Acrylic Sheet - www.amazon.ca/...
_______
Tools Used to Make The Box:
- Utility Knife
- Carpenter’s Square
- Permanent Marker
- Need & Thread
- Hot Glue (Bad Idea!!!)
_______
Tools in the Tool Box:
Lid:
- Mastercraft Side Cutters
- Mastercraft Needle Nose Pliers
- Park Tool VC-1 Valve Core Tool
- Park Tool VP-1 Vulcanizing Patch Kit
- Cassette Tool
- Park Tool SD-Set Shop Screwdriver Set
- Accu-Gage 0-30 psi
- Park Tool SW-0 Spoke Wrench
- Scissors
1st Middle Layer:
- Park Tool SR-1 Sprocket Remover/Chain Whip
- Open Ended Wrench 1”
- Tire Levers
- Fox Shock Pump
- Park Tool TWS-1 Torx Wrench Set
- Maximum Metric Hex Key Set
- Bicycle Shaped Bottle Opener
- Mini Maglite (Cub Scouts Canada Edition)
2nd Middle Layer:
- Unior 1666/2DP Rotor Truing Fork
- Unior 1720/2DP Master Link Pliers
- Pro Chain Tool
- Park Tool CC-3.2 Chain Checker
- Axiom Chain Ring Bolt Wrench
- Bike Cable Cutters
- Mastercraft Pliers
- Park Tool BBT-22 Bottom Bracket Tool
- Mastercraft Utility Knife
Bottom Layer:
- Small Parts Container 1 (Grease, Chain Lube, Carbon Paste, Shimano Bleed Kit)
- Small Part Container 2 (Miscellaneous Parts, cable crimps, cable ferrules etc.)
- Open Ended Wrench 7mm/8mm
- Nalgene with Shimano Brake Fluid
- Spray Bottle with Isopropyl Alcohol
- Park Tool PP-1.2 Hydraulic Brake Piston Press
#diy #toolbox #bike

Опубликовано:

18 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@marcod.9629 5 месяцев назад

Amazing toolbox

@mcassellmtb 5 месяцев назад

Thanks!

@DonnySimpanero 2 года назад

I love to see peoples custom toolboxes with the foam. I have an Armstrong USMC GMTK tool kit and it’s a heavy sucker. 106 pounds lol.

@mcassellmtb 2 года назад

Nice! This one only weighed about 30 pounds or so if I recall.

@comcodyrocks 3 года назад

An alternative to the hot glue would be contact cement. I don't know what brand you have in Canada but in the states the good stuff if Barge Cement. It's used to glue soles to shoes and is incredibly strong if applied correctly. The trick is to apply to both surfaces, let it dry until it's tacky, then (carefully) sick them together. You would need to rough up that acrylic with sandpaper first though. Another alternative is spray adhesive like Super 77 (I think that's what it's called) but I've never used that stuff so I don't know how strong it is, I just know it's kinda messy.

@mcassellmtb 3 года назад

Thanks. I've been meaning to try a test with regular white craft glue. I bought some for another project. Contact cement is agreed another option. Have you used it on this type of foam before? I've used spray adhesives before and was my first thought when the hot glue didn't work.

@garrettswoodworx1873 3 года назад

@@mcassellmtb Ironically, hot glue would probably work perfectly for the handles.

@butchgreene 2 года назад

3M makes a spray foam glue for this exact application. #74 I believe. If you need it just sheet to sheet, #77 is in stock in home improvement stores.

@MrCoscarelli 2 года назад

Great video! Thank you

@mcassellmtb 2 года назад

Thanks!

@BenDunlop 4 года назад

Thanks for this detailed vid, very helpful. I'll be doing the same

@mcassellmtb 4 года назад

Thanks!

@davidcurtis6347 2 года назад

Noice job bro.

@mcassellmtb 2 года назад

Thanks!

@techdavis 11 месяцев назад

Not sure why you didn’t slot the polypropylene for the handles. That way there would be more support for the layer, and the glue issues would be nonexistent

@mcassellmtb 11 месяцев назад

Yeah. There were probably a number of ways that I could of done this. But this what I came up with at the moment.

@mtbkc8975 3 года назад

Great vid. Never done this but wonder if a Dremel tool would be useful for clean cutouts for the tools?

@mcassellmtb 3 года назад

I've never tried using the Dremel. I'd be concerned it would snag and tear. I do have some scraps left. Maybe I'll try it one day.

@janeblogs324 Год назад

Way too much mess. Carbide bits will clean cut

@jimhansen5395 3 года назад

Good video - working on a similar project - I wonder if double sided velcro would work for the handles?

@mcassellmtb 3 года назад

I don't see why not. Would be quicker to install the handles for sure. Might collector dirt faster depending on where you are using the tool box.

@WillisZzz 4 года назад

I have one, love it! Much cheaper than the pelican brand. Have you ever tried removing the lid? I need to remove the lid to perform some mods but I don't want to ruin it...

@mcassellmtb 4 года назад

So much cheaper! And they regularly go on sale at Canadian Tire! And I've never taken the lid off.

@Volcker1929 3 года назад

3M Super 77 or Super 90 is best for foam.

@mcassellmtb 3 года назад

Awesome! Thanks! Will look it up.

@garrettswoodworx1873 3 года назад

LOL! You beat me to it! I've used Super 77 and it works great. Was going to suggest the same.

@cahyoananto 2 месяца назад

"It looks safe, neat, and nice, but actually, you are losing 75% of the tool box's capacity."

@mcassellmtb 2 месяца назад

@cahyoananto agreed. This toolbox does not use the inside space as much as it could. But it fit all the tools I wanted to add to it. It was more of a travel kit then a home shop kit.

@RoadkingNZ1 3 года назад

I would have used a spray adhesive

@mcassellmtb 3 года назад

Considered it. Past projects, spray adhesive hasn't held up well longer term. But the materials being glued were different.

@LucaDelRe Год назад

Hi where is possible to find a foam?

@mcassellmtb Год назад

Here is where I got the foam from kaizencasesandinserts.com/?gclid=CjwKCAiAhKycBhAQEiwAgf19eomk-LyITfhdVXyK5Z3tlMY3eyJz7ptyIrlrLp6fsykijIGKQIZicBoCnMQQAvD_BwE